Counting matching models…
The kneeling Vader from jhwblender / FLOWALISTK is an awesome design I fell in love, immediately. It is exactly what I was looking for since a long time. But during printing several issues came up. This led me to the decision to rework…
This is a solution for a clip to lock the IKEA SAMLA 55/130l boxes. I did not find a solution for this box size as simply scaling a 22l clip does not provide a solution tightly closing the box. It creates a tight closing and is easy to…
This is a cap to seal the garden hose during winter time. I have some piece of hose lying underground and during winter I wanted to close it at the ends to avoid dirt getting inside. There is 2 versions available: gardena-end-05: fully…
I needed a nozzle for an old AEG Vampyr 6006 model which seems to have some unusal connection not found somewhere else. So I decided to design a new one. The parameters of this model can be easily adapted in a FreeCAD spreadsheet. So in…
I wanted to create an exciting solution of a pen holder on my office desk. There I need just one pen which I wanted to give the respective ambience. Perfectly fitting to the vision in my mind I found the spider model of Jason C Kessler.…
As the gasket of my jerry can got lost I printed one using TPU. Out came this small OpenSCAD file which now gives me any size of gaskets with rectangular shape. Attached is also some STL examples. Printing Filament: Should be selected to…
This is a wrench for opening the Adblue cap of the Audi A6 (model C7). You can spin it around continuously when opening or closing. I have designed it because I did not want to use the wheel wrench which can provide too much torque and is…
This is a holder for a set of 12 ring wrenches with an angle of 15 degrees. There was requests for a holder of 2 sets, now also available is a version for 2 wrenches of each size . I was inspired by the nice model from Johann Arndt. But…
I designed a cable clip for a neat installation of my network cables. Adding an additional cable I saw that this is an ideal use case for an OpenSCAD solution. So I extended the initial FreeCAD design to an OpenSCAD file. Now you can…
This is a modification of SAMLA HANGA by jan Grewe. It is a holder for a dry box solution using an IKEA 22L SAMLA box. The SAMLA HANGA by Jan Grewe ( https://www.thingiverse.com/jangrewe/ ) has a very nice design. But some weak points…
This is an insulating terminal adapter for a 151x65x93mm SLA battery. For my hobby applications I wanted to have a safe connection to avoid unintentional shortcuts and additionally have an integrated fuse directly at the battery terminal.…
This is an ant trap to be filled with poison. It can be used inside or outside. I wanted the bottom part not to be too steep for the ants. So I kept the original bottom part of the ant trap of Hobb3s but modified the top part similar to…
Having a bunch of brocken pegs I spent a few hours to extend the life of their metal springs and to convince my wife of the advantages of a 3D printer... There is 2 versions for 2 different size of springs: 50-18-55: 5.0mm diameter of the…
This is a design of T-nuts for 4040 aluminum extrusion profiles using M3 nuts and screws. It can be used to fix light-weight objects on 4040 profiles. Advantages of this design: easy handling (4040-t-nut-m3) A tight thread channel with…
Door handle for my printer cabin made out of 2020 aluminum extrusion profiles. The handle is optimized for B-Type Nut 6: The feet will fill the nut avoiding sliding The foot plate is slightly bent for a tight fit without wobbling You Need…
This is an adapter to directly connect the Bosch GCM 800 SJ (and I suppose several other types) to the Nilfisk Attix 30 vacuum cleaner. Both systems have a click-in mechanism for a fast and easy assembly and disassembly providing a…
50mm Version des tollen Aero Lenkerhalters für Sigma ROX GPS 11.0 von CBiker (https://www.thingiverse.com/thing:2612827). Die Verbreiterung war Notwendig wegen Umstieg auf 48mm Lenkerhalter. Zusätzlich wurde die Lenker-Fixierung leicht…
Inspired by the Prusa Contest I decided to start my first steps with parametric design. It took me more time than expected to dig into OpenSCAD and especially how to ensure consistency. But at the end it is amazing to see what is…
The IKEA Tronnan replacement brush fits perfectly to my brush holder. But unfortunately my stick does have an M12 thread which does not fit to the Tronnan. So I decided to design this adapter. Printing Hints: The design is optimized for…
This is an alternative set of insert boxes for the organizer box EuroPlus Flex 37 from Allit AG (Germany). It provides cavities with half of the original height for efficiently storing very small items. Two of these boxes will have the…
Air intake regulator cap for the Miele Artico (HS05). This is a replacement of the original cap which was getting loose and always falling apart. I started printing with transparent PETG but result was so good that I did not change to…
I am quite happy with my table saw MLT100 from Makita. Nevertheless, it is designed for cutting construction timber. But I often use it for cutting firewood made from crooked branches. In the process, from time to time the branches bounce…
This is an adapter to mount the Raspberry Pi 4 case ALUCASEP4+08 from JOY-IT to a DIN-Rail. I did not find a good solution for a DIN-Rail case so I decided to use this standard case and applying an adapter. The case is fully out of…
This is a case for mounting GPS antenna of base station onto a 1 1/4" steal pipe. The case can be used for simpleRTK2B Starter Kit LR from ArduSimple (150mm plate diameter) or Marotronics (160mm plate diameter). Improvements against the…
This is a cap for a cable duct. As I did not find some at the hardware store I designed my own one. I wanted it not to be bigger than the cable duct, so the fixation is only on the inner side. Print does not need any support. Supported…
LM08UU linear bearing (linear and tapered) This is my proposal of linear bearings of LM08UU type. There is two types, a linear and a tapered one. Both are drill types which means you need a 8mm drill to adjust the inner diameter. Drill…
This is a robust filament holder which can directly be put on the Anet A6. The holder consists of 2 parts to avoid issues with layer adhesion. It can be printed without any support. The assembled holder can be fixed by screws or you may…
Inspired by TD3D I made my bench vise pads fitting to my bench. It has notches for better fixation of round objects. For a better fixation on the bench there is the possibility to add 3 pieces of magnets 3 x 10 mm at the upper side. They…
This is a collection of modifications and improvements I have designed for Alfred, a robot mower based on a wire based mower with an additional GPS-modification kit. Further improvements are already in work an will be added, later.…
This is a holder for a set of Wiha Screwdivers PicoFinish Torx T4..T9. I got tired of always searching for the right screwdriver lying somewhere in my drawer. So I designed this clip to keep them altogether. This helps to find the right…
Neuhofer parts Parts for Neuhofer clik-fix 17 and FU123C Edge1: 46x46mm (20mm space to wall, 6mm fixation, 20mm overlapping) Needed material: nothing History Version 0.1.0 First published version and currently in use. Print instructions…
I wanted to flush the drain pipe of the shower using my garden hose. To connect the garden hose to the shower, I printed the adapter from dixel ( https://www.printables.com/model/948961-shower-wandgarden-hose-adapter ), which worked…
This is a remix of Margel's cool Christmas remix (https://www.printables.com/model/677425-death-star-christmas-tree-ball) to now form an easter egg for decoration. Printing Filament: Any. I printed with XPETG white matte which gives it an…
This is a cover for a 60mm junction box ending in a 40x25mm cable duct. I needed an additional power line from the junction box. As this was in a store room I was looking for an on-wall solution. You need: 2x socket screws for junction…
This is a case for the base station of the simpleRTK2B Starter Kit LR from Ardusimple ( https://www.marotronics.de/simpleRTK2B-Starter-Kit-LR-IP67 ) I bought the RTK Mower Alfred ( https://www.marotronics.de/GNSS-RTK-Mower-Alfred ) and…
This is some small improvements for the y-belt tensioner of the Anet A6 Evolution cube type printer https://www.thingiverse.com/thing:2067818 : Guidance to avoid torsion of the belt Enlarged body for using 15mm washers (DIN 9021) The…
As the Nilfisk Attix 30 vacuum cleaner does not provide any convenient mechanism for storing the power cable and the hose, I designed a hook for it. The hook can be put at the rear side and once clicked onto the handle stays there…
I designed these brackets to fixate the bird feeder having a 70x70mm wooden pole at my railing in winter time. Basically you can use just 2 screws for each bracket if you want to remove the pole more often. But additional 2 screws can be…
This is an adapter to connect a DN60 rainwater pipe to a DN50 HT pipe. I did not find such a product in the stores, so I decided to design one. There is 3 models available: dn60-dn50-symmetric.stl Standard adapter (centric and symmetric)…
Description This is a replacement handle for a snow shovel with aluminum shaft. Different to the original one I designed the handle in a more robust way avoiding danger of breaking. Design is also optimized to be printed without any…
This is a collection of models to be used as clearings for M3, M4 and M5 nuts. Using these clearing models by subtracting from your solid is quite convenient for designs of objects to be assembled by screws. The clearing models are…
This is a set of tools for a neat permanent Wii installation minimizing impact on furniture and not affecting the Wii components or the TV. It consists of a holder for the power supply a holder for the infra-red sensor bar The power…
LM08UU linear bearing block This is my proposal of linear bearing block to be used together with tapered version of https://www.prusaprinters.org/prints/49078-lm08uu-linear-bearing It is used for my Anet A6, but should fit on A8 as well…
This is a model for additional mouth pieces for the alcohol tester model Draeger 3820. As the original parts are quite expensive, I decided to make them on my own. Accuracy of measurement could be affected as the model is not an exact…
Used to cover a steel pipe for a table. History Version 0.1.0 First published version and currently in use. Print instructions Rafts: Yes Supports: Yes Resolution: 0.4mm Infill: 100% Filament: ASA or other
As the fixation was broken at one end cap, I decided to design a replacement. Unfortunately I currently have only black color available and not anthracite grey. The edge type is also quite fragile and was broken when opening the strip for…
Last week the pin for the lid of the trashcan got broken. As the trashcan itself is still in good shape, I designed a fast replacement. The pin is a replacement for the Weber MGB 80 L (Deckelbolzen DB00010). It may fit also for other…
Anet A6 alternative Fan Plate: Concept: Modify existing fan holder to re-arrange hot end fan for better filament handling improve weight add holder for cables Installation: Compatible to existing standard ANET A6 installation. Print…
This adapter gives my old cordless screwdriver a new live ;-). The 16.8V battery pack was broken and I did not want to invest in NiMH adapter anymore. But as I use Makita LXT 18V system, I bought a cheap adapter at…
This is a design done with OpenSCAD (http://openscad.org). It is available for most of the popular Operating Systems. For this stand you can customize: height wall thickness top diameter bottom diameter ellyptic factor (relation of…
This is a basket for toilet cleaning blocks up to 36 mm. I did not like the cleaning block to lie on the ground. And I somehow wanted to slow down the dissolving process. So I designed this basket to be fixed on the pipe or hose. Holders…
As with COVID, the mouthpieces should not be shared or commonly stored, I made this design to print out a bunch of mouth pieces for family and friends. Printed with TPU the pipes are even more convenient than the stiff ones shipped with…
This is a protecting foot for wood poles standing outside. Features holes to support drying invisible screw for fixation no printing support needed The foot is 67x67mm which was fitting to a nominal 70x70 type. You can scale it (or…
This is a design for a cover of the 5W Meanwell IRM-05 power supply series. This module is supposed to be directly soldered on some PCB, but for some projects I use this module as a separate power supply. The bottom plate comes in 2…
This is a robust rim design for heavy outdoor activities (lawn mower). It can be combined with all tires using a 200mm dovetail tire interface DT200. Main characteristics: Dimensions: 200 x 40mm Mounting: 4 holes for M4 screws, distance:…
DIN-Rail Adapter for the USB Ethernet Adapter LogiLinkUA0144b. There is now additional components needed. Due to the shape the Ethernet Adapter cannot get out of the holder unless it is not lifted. I used the fixation mechanism from…
This is a design of a 250mm tire with DT200 rim interface which can be used as a replacement for the original Ardumower wheels. Main characteristics: Dimensions: 250 x 40mm ' Rim and tire are printed separately. So you can use a stiff…
The Technoline WL1030 air quality monitor just has a table stand. But we wanted to hang it to the wall near the power plug. So I designed this wall holder. The holder consists of 2 parts: a wall plate and a wall holder. The wall plate can…
This is a simple and light-weight rim design for moderate applications (laboratory & development). It can be combined with all tires using a 200mm dovetail tire interface DT200. Printing To get a satisfying result please first carefully…
Raspberry Pi Frame for Sony BRAVIA KDL-37S5650 I have turned my full-HD TV set (Sony BRAVIA KDL-37S5650) into a Media Center by using a Raspberry Pi and LibreELEC. To have it cleanly arranged, I created a frame for the raspberry and a new…
This is a collection of useful fixtures and holders for active development on new features for the Ardumower with 2021 case. PCB Holder With these holders the PCB can be fixed on the open Ardumower to better have access to the board and…
This is a rain collar for a 1 1/4" water pipe. In my application the pipe is mounted vertically. Potentially rain water could get into the building. Printing Filament: TPU (for flexibility getting sealing against water) Infill: 100%…
The Jabra Evolve 65 SE headset is not very stable on my head. Whenever I move a bit faster or I look down to the ground, it potentially falls off my head. So I designed an additional holder which can easily be added and stabilizes the…
Appreciating the design of the perforated stainless steel magnet board from blomus I use them in my office at home. But there is only one drawback: The board is mounted with 2 screws on the top only. Pushing away a strong magnet lifts the…
The K&M 11940 is a robust and reliable music stand. However, while it is easy to disassemble and transport, it is not very comfortable to carry. Especially when carrying for a longer time, it tends to turn around and is not easy to…
I needed a 30mm wrench for installing of a water tap. Lacking an adjustable wrench but having a 32mm wrench, I designed this small adapter. Besides adjusting from 32mm to 30mm it also protects the chrome-plated nut against scratches from…
This is a fixation to support re-sharpening blades for motor mowers. There is 2 versions available: 34 mm 1 hole (5.5mm) 36 mm 2 holes (7mm) Printing filament: any infill: 30% support: no
I made some modification to the headset holder from EPOS Sennheiser model as for the 2 ears headphone the microphone and one earphone always touched the ground. And I didn't want to clean the desk with my headset microphone… :-) Needed…
This special formed washer keeps the adjusted mounting angle between bike computer and power meter to avoid measuring errors when touching it for switching on or off.
Optimized flat gasket for a brass fitting to connect a hose to a KFE valve (boiler refill valve). Unfortunately, a Simplex KFE valve is designed with a special gasket and is difficult to seal properly using a flat gasket fitting. This…
With this adapter it is possible to attach a funnel to the WS4003 anemometer. I have designed this funnel adapter to measure my air conditioning system at home. The adapter can be printed easily without support and with snappers not…
This is a gasket designed for the Ardumower mower motor (2021 chassis). Generally, it can be used for any other purpose as well. Printing Filament: flexible needed (e.g. TPU) Support: no Infill: Due to the small size 100%
This is a spare part design of the battery cover of the Swarovski Laserguide 8x30 which unfortunately got lost. The part shown was printed in PETG using the Prusa textured PEI. This fits quite well to the device.
This is a collection of specific DN40 parts I designed for an electrical installation using DN40 pipes as an outdoor underground cable duct system. Straight Pipe 40mm Base model of a straight pipe with minimum length (40mm). This design…
I had to empty my cistern using my T.I.P. Maxima 300. This is a dirt water pump and has a quite high pump foot. The cistern does not have a pump sump and the water is quite clean. So I do not need to manage bigger junk. Priority was to…
This is a replacement of a broken HP keyboard foot I made for a colleague. It fits to the KU-1156 (and maybe also some other types) from HP. Printing Filament: PETG or similar filling: 100% support: I printed without any support nozzle:…
By the decades of usage my favorite toolcase suffered on legs breaking into the case due to rugged usage and overloading with lots of heavy tools. For the next decades I designed improved feet supporting better the weight. For each foot…
My Hoermann garage door opener Supramatic P2 has a 12V G4 lamp. It is a closed halogen reflector lamp including the front glass which nowadays is very difficult to find. Unfortunately, it now got broken. I designed a replacement using an…
The key for the EWELLIX therapy table from Özpinar was broken. So I designed one as a replacement. As the key is working pneumatic, it has to fit precisely. For this reason I also used TPU which is able to be deformed . In case of further…
In our bathroom we have installed the Villeroy & Boch ceramics series Viala . This includes a liquid soap dispenser. But this unfortunately got broken. Since some time Viala is not available anymore on the market. So I chose for an…
Description Design of a mounting plate for an Abus Camera on top of a 1 1/14" pipe. Cables can be guided and protected within the steel pipe. Fits for various camera types like: TVIP61560 TVIP62560 TVIP64510 TVIP68510 There is 2 variants…
This is a fast and easy design of holding brackets to fix the insulation cover of a Paradigma Solar Station. I used 2 of them to ensure the insulation box to keep closed. Printing Use PETG or similar (PLA is not recommended due to the…
This is a quick design for olympic rings with screw holes for easy mounting.
This is a Qi loader I made for my smartphone to fit in size and to easy easy to grab. But the flat version published here will fit to any size. You need: 10W charger module 4x tap screw 2.2 x 6.5 mm USB power supply The case is printed in…
Description This is a clip for supporting electrical installation with a 60mm cable duct. It prevents cables falling out of the duct when opening improves the fixation of the cover, especially when segmented Printing Filament: PETG…
I designed this clip to fix a power supply cable to be mounted on the top of a cabinet for future applications. This keeps the cable tidy and does not interfere when the cabinet is moved. Additionally, the clip secures the back panel.…
As this summer was quite hot, I decided to by a mobile air-conditioning system (TROTEC PAC 3810). It can cool my house powered by photovoltaic system. Typically, there is plenty of energy available in that situation. To avoid drilling a…
I have some filament shipped on 300mm spools according to DIN EN ISO 544. Using 2 of these spools with the Prusa XL is possible. But if the printer is equipped with the Enclosure, there is a potential blocking by the handles of the…
Having a powerful light I appreciate using the K&M music stand lamp 12271 especially in dark winter time. Nevertheless, the switches can easily be switched unintentionally during transport leading to empty batteries. This protection ring…
Insert for using a food dehydrator for drying filament. The frame can contain spools with a diameter up to 300mm (DIN EN ISO 544). The insert can be used for 1 or 2 smaller spools. It is compatible to Stöckli dörrex . Printing filament:…
These are all currently available results.
