Counting matching models…
I love repurposing Altoids tins. This is a collection of inserts for carrying various types of batteries. I've also included a blank insert you can use to create your own in Tinkercad or another design program. If you like this please…
This tool was designed to make changing MicroSD cards in a GoPro a lot easier. The MicroSD card slot in the current generation GoPro has a tendency to launch cards across the room/field/car. If you avoid ejection it can be a bit tricky to…
I needed to focus my Raspberry Pi camera but I'd already mounted it in an enclosure which prevented me from using one of the other numerous tools I'd already printed from here. So I designed a tool with a long neck so it could get inside…
This is a wall or bench mounting plate for 20x20 v-slot aluminum extrusion. Has a v-shaped wedge to help with centering/stability. To fasten to your extrusion use M3 screws and the usual hardware. I recently discovered these nifty roll-in…
Simple tool for removing the lens of a GoPro Hero11. I only have the 11 but I'm guessing it works with others. The lens dimensions are 32mm x 32mm, so anything with those dimensions should work. Prints easy with no supports. If you like…
This is a compact 90 degree brace for Openbeam/Makerbeam XL 15x15 extrusion. There are two versions - one is a straight 90, the other is a very handy 90 degree rotated variant so you can do crossovers. The crossover version is pictured in…
The hose that comes with the F1&F2 is kinda lame. I wanted to use a more rugged and standard shop vent hose but the dimensions are slightly off, so I made this adapter. The wide end slips over the exhaust port on the back of the engraver.…
I wanted to do a phone stand to take advantage of the ios17 standby feature. I wanted the ability to not charge when upright, but charge when horizontal. I found a small magnetic charger puck and designed this stand to work with it. The…
This is a multipurpose soldering jig to help with soldering headers on a small selection of devices that I use a lot. This jig has slots for 20x1 and 20x2 (raspberry pi) standard 2.54mm male/female header strips (works for both). It also…
This is a simple guide which attaches to the Laserpecker self-adjusting stand. Helpful for aligning your stock if you're etching a bunch of things. Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: No Resolution: 0.2…
There are a couple of desk stands out there but a lot of them require a bunch of support to print. I decided to do my own without requiring supports - BUT you do have to glue. Simple design...print two copies of the feet, one copy of the…
This is a wall/rack mountable holder for the plastic cases SDHC/MicroSD cards come in. It's designed to be screwed into the wall or onto the face of a 1RU rack panel. You could also foam tape it to whatever you want. It's angled upwards…
This is something you never knew you needed. It's designed to mount a small security camera upside-down. This can be useful if you are mounting say a ceiling mount dome camera somewhere other than a ceiling, or a ptz that you want to have…
This is a soldering jig for a Raspberry Pi header. Drop the header into the socket in the center, drop your piece on top, solder away. I designed it so you could tweak the support layout to handle larger-than-normal components getting in…
This is a snap-on cap for the standard Raspberry Pi header in case you want to run the pi naked but worry about something shorting all those easy-to-drop-stuff-on header pins. Sure you could just cut off an old connector or print…
I picked up this anemometer from Adafruit: https://www.adafruit.com/product/1733 I plan on using a magmount adapter with a 1/4-20 screw to mount it. The anemometer base has four screw holes, so I made an adapter. The hole for the 1/4-20…
I love the ESP8266 Double Wide Marquee Scroller News Weather Clock but I wanted to do a couple of things differently. I wanted to mount it on an elevated pole mount using OpenBeam parts I didn't want to solder directly to the display…
This is a 50mm round foot for OpenBeam/MakerBeam XL 15x15mm beam kits. Press-fit and fairly tight tolerances so tweak your printer setup accordingly.
A stylized version of the ubiquitous bench parts tray. Great for holding screws and such while working on things. Octagonal cut-outs and an octagonal shape....doubles as a coaster!
Simple mount to mount a camera inside the enclosure of an xtool f1/f2 laser engraver. There are two pieces - a base and the mount. The mount is for a raspberry pi cam3 and you'll need m2.5 screws/nuts to attach. I used an m3 screw/nut for…
These are all currently available results.
