Counting matching models…
DIN rail mount for a SSR. Designed for the SSR that comes with the RatRig V-Core 3. A optional spacer for better air circualtion is also available. Prints without supports. Printed in PETG at layer height 0.2mm. Mount is designed for M3…
Basic case for Logitech MX Master 3. Snaps together with two 6x3mm magnets. The Magnets should be a push fit. EDIT 23.04.2022: I added the raw STL files as requested by albza EDIT 24.02.2025: Added a V2 where the pockets for the magnet…
Mount for the BigTreeTech Octopus V1.1 board using a DIN rail. Options for 92mm and 120mm fan. Prints without supports. Printed in PETG at layer height 0.2mm. I mountend the Octopus with M3 brass standoffs. Fan Mounts are designed for M3…
Stand for charging my Huawei Watch GT 3 Pro. There is a right and a left version. The model has built in cable guide and room for cable storage. Prints without supports. Other Watches from Huawei may have the same charger. Charger…
Cable holder / organizer with DIN rail mount. Vertical and horizontal option available. Designed for 3.6mm zip ties. Prints without supports. Printed in PETG at layer height 0.2mm. DIN Rail Mount is based on the Voron DIN rail clip. (…
Quick remix of https://www.prusaprinters.org/prints/80030-rat-rig-v-core-3-iec-adapter-surface-mount and https://www.prusaprinters.org/prints/82811-back-cover-for-iec-320-power-socket-ratrig to fit the iec-adapter I had ordered. I added…
The Natural History Museum Vienna has a great collection of 3D scanned objects from their collection at Sketchfab. I have remixed this Megalodon Tooth from their collection for easy printing without supports.…
I remixed the great model from tato_713 to have a secret compartment. The two halves are secured together via a short thread with a snap-fit.
DIN rail mount and terminal cover for the WEHO LRS-250 PSU. (might fit other models, Meanwell LRS-200 series seems to have the same dimensions). Terminal cover can be opened without tools. Prints without supports. Printed in PETG at layer…
I really liked the look with the tooth on top of the original thing, but I wanted just one big room inside and a bit of a texture on the outside. This is the result. EDIT 19.09.2022: Added top parts with a more loose tolerance on thread…
DIN rail mount for the Raspberry Pi 4B with an optional mount fo a 60mm fan. Prints without supports. Printed in PETG at layer height 0.2mm. I mountend the Raspberry with M3 brass standoffs. The Raspberry is designed for M2.5 screws! I…
Cable clip for 3030 extrusion profile. It has a tight and sturdy grip. Use a screwdriver to remove the clip. Prints without supports. Printed in PETG at layer height 0.2mm.
I split the head and added pins for easy printing. Everything is scaled to 150% of the original files! I don't know if the pins would work, if you scale them back.
This is a pencil case in the shape of a pencil. The parts connect with magnets. The rubber has a screwable compartment The tip and the rubber connect with the rest of the pencil case in a way, that they can also be used as fidgets.…
Screw with a twist. Print all parts. Put together top and bottom of the screw and put the nut on the screw until you cannot see the gap anymore. Now you should not be able to unscrew the nut until you know the trick. Print without…
I printed the John Deere Tractor and Trailer from Thingiverse: https://www.thingiverse.com/thing:1534474 scaled at 150%. But some parts were not strong enough, so I remixed them to be stronger. Remixed roof, rooftop and trailer-body to be…
Mount for Raspberry Pi Camer V2.1 for the front left corner on a RatRig V-Core 3. Place the camera module into Pi_Cam_Back and push Pi_Cam_Front into place. I didn't need to use glue. Insert he clips for the camera cable into the 3030…
Remix of the EVA 2.3 universal cable mount for holding an adxl345. Prints without supports. Printed in PETG at layer height 0.2mm. Hardware needed: M3 bolts and nuts for the adxl345, 2x M3x8 mm Update 08.04.2022: 19mm mount added
I took the default bottom horns from EVA3.0 and remixed them for better airflow direction. The changes were made with the Ratrig toolhead V1.0 as template The airflow is now more central under the nozzle. Hardware needed: 1xM3 heat set…
Cable guide for my Ratrig Vcore 3 300. There is a a frame anchor and a hotend anchor for the piano wire. For the Frame anchor use a M3 screw for securing the piano wire and the original screw for mounting it to the printer frame. For the…
Mount for the BigTreeTech smart filament sensor to a 3030 extrusion. No additional screws needed. It is a replacement for the original backplate. Remixed from the original BigTreeTech STL file.…
Ender 3 Pro display offset. I couldn't install the BTT TFT35 E3 V3.0 because the buzzer was touching the 4040 profile. So I created this offset mount. No additional screws needed. Print Settings Printer Brand: Creality Printer: Ender 3…
I remixed ChargedNeuron's Cryptex, becaus I didn't want to glue the endcaps. So I added a snapfit with pins. Pins printed in PETG worked well. PLA pins broke! Since I wanted this to be a gift, I also designed a holder with a QR-code…
Remixed jaws for holding PCBs.
This is a 75° V2 Engine fidget toy inspired by a KTM 990 LC8 engine. This is what I came up with. Crankshaft and pinion are connected with print in place gears. Connect cylinder and rod with a piece of filament. Then insert as shown in…
This is my take on the connect four game. I made this a gift. The parts of the game use magnets and washers to hold onto each other. The top also uses magnets to hold onto the bottom part. The bottom part doubles as a base for playing.…
Ignition key hole cover for a Yamaha Tracer 9 May fit other models too. Printed in TPU.
KTM 990 SM-T Keychain Change color at z=1.0mm Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: Doesn't Matter Supports: No Resolution: 0.2 Infill: 25% Filament: Sunlu PLA black, orange Category: Automotive
This is a lamp holder for the ikea jansjo led lamp. It is designed to fit the rails of the ikea kura bed (42x42mm). Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: 0,2 Infill: 20 Category:…
Tracks for Duplo Car base. https://www.thingiverse.com/thing:2414735 Tracks printed with TPU I did retouch the holes with a 8 mm drill. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: 200…
Mount for 22mm handlebar for the Daytona Control Unit for heated motorcycle grips. 2 different heights. The mount is asymmetric! Use cable ties to mount the holder to the handlebar and double sided tape to mount the controller.
This is a remix of https://www.thingiverse.com/thing:3052488 I had this guide in use on my printer. After buying a BL-Touch, I had a spare end-switch, so I remixed this filament guide to hold the spare switch. Additional material: 2x M3…
Wall mount for a photo on acrylic glass. Snap fit design, to fit smaller beds. Print with supports, but add a support-blocker for the notch where the nail goes!
Corrugated pool hose clips for holding two 32mm hoses that connect my pump and filter to the pool and the skimmer. The hoses clip in place an can be fixed with cable ties for a more permanent solution. I use these to keep the hoses away…
A Box for this memory game: https://www.prusaprinters.org/prints/5540/author Top and bottom slide together. I used two 6x3mm magnets to keep it shut safely. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports:…
Headlights for a KTM 990 SMT / Scheinwerfer für KTM 990 SMT The headlight is a direct replacement for the original one. Even the height adaption mechanism will be working! Der Scheinwerfer ist ein direkter Ersatz für den Originalen. Auch…
A simple box which can hold up to three watch bands. Dimensions of the bands: 140mm x 29mm x 11mm (fits my 22mm Suunto watch bands) The box has a slide lid.
These are all currently available results.
