Counting matching models…
Ever had a Part fail horribly due to a partially clogged Nozzle leaving small and hard to remove Filth all over the Build Platform? A plastic Scraper may come in handy getting those Parts off without either touching the Build Platform and…
A Fan to slip onto an ER11-A Collet Type Nut from below to act as an Ultra Low Budget Chip Evacuator using the Fans Downdraft. When properly installed the Top of the Fan should be flush with the Top of the Nut. The Fan should work as a…
BOM: 6x ID 3mm / OD 6mm 9x ID 6mm / OD 10mm Scan Markers 1x 8x3mm Magnet ( optional ) INSTRUCTIONS: The Model is about 53mm Tall with a 76mm Diameter requiring neither Supports nor a Brim. You'll be needing 6x ID 3mm / OD 6mm and 9x ID…
EdgeTX , a modified Firmware and a Radiomaster TX16 touch enabled screen make it possible for the FrSky Horus X12S radio transmitter to also have touch functionality. The increased thickness of the touch enabled screen though makes it…
BOM: 11x ID 6mm / OD 10mm Scan Markers 1x 8x3mm Magnet ( Optional ) INSTRUCTIONS: The Model is about 24mm Tall with a 30mm Diameter requiring neither Supports nor a Brim. You'll be needing 11x ID 6mm / OD 10mm Scan Markers per Ball to…
A 90° Drill Guide with a Picture Frame Screw Hole at the bottom to hang it up and the possibility of embedding two 8x3mm Magnets ( requires a Pause Command to be inserted at the appropriate Layer Height ) Press Drill Guide Bottom against…
A DIN Rail Mount for a BigTreeTech KRAKEN Controller Board that attaches across two DIN Rails. Print Instructions: The Board Mounting Part is a MultiColor Part for those that fancy it. I've used the usual Voron 0.2mm Layer Height, 4x…
Print yourself a bunch of the Pegs and optionally screw in an M3x10-20mm Countersunk Screw to prevent the top portion from delaminating from the rest ( may also be used as a Magnetic Anchor when storing them away 😉 )
Voron 2.4 R1 XT60 Skirts Mount to passthrough juice for externally mounted hardware like an ERCF using an ERCF-Easy-Brd . May also work with the R2 and/or the Trident ( depends on the size of the Skirts Hexagonal Holes ). BOM: The two 3D…
3D printable 1-20mm Gap Gauge Measuring Tool inspired by Clough42's Precision Taper Gauge Video . The Model is roughly 215mm long and was designed with automated Multi Color 3D Printing capabilities in mind but in a pinch can either be…
A DIN Rail Mount for a Mean Well UHP-350-XX Power Supply that attaches across two DIN Rails. Print Instructions: I've used the usual Voron 0.2mm Layer Height, 4x Perimeter, 5x Top / Bottom Layers, and 40% Infill Settings which should work…
The model is designed to be 3D printed, upside-down, on the ring the egg will rest on - Not the legs. The design has no particular needs other than being 3D printed with like 2 perimeters and in a somewhat heat resistant material like ABS…
The MOD for the ERCF SturdyBunny MOD replaces the ever-problematic micro -Servo with a regular Servo. The design has some similarities to Mr Goodman's Large Servo PushMOD but differs in my design not requiring the Servo to remain…
The Model comes prealigned and shouldn't require Supports but will benefit from a Brim . The indented Areas can be used to Bucket Fill with Fuzzy Skin to aid in Grip when removing them. Personally I'd suggest printing a set of three or so…
BOM: 3x ID 3mm / OD 6mm 3x ID 6mm / OD 10mm Scan Markers 1x 8x3mm Round Magnet 1x M4x10mm Socket Head Cap Screw INSTRUCTIONS: The Model is about 50mm Tall with a 40mm Diameter requiring neither Supports nor a Brim. There are to Versions…
Preparation: The Case reuses the Bar Magnets that come in the Bit Storage Case requiring for them to be retrieved first ( most likely cleaning by removing any glue and case material still sticking to them ). The Cavities account for…
Long story short - I REALLY didn't like the Mobile Kits Clamp Style Cellphone Mounting Solution for when using Revo Mirror hence why I decided to make this MagSafe Alternative also incorporating a Camera Light Attachment. Print…
The Model should for the - IMHO - best result be printed with the front facing down as the resulting overhang with the Apple Logo has a more print friendly 50° Angle. Besides the obvious Apple Watch Magnetic Fast Charger you'll also be…
Idler Wheel Support for a Tamiya #56020 Leopard 2A6 to help against the force of the Tracks pulling them back. Made to work together with 3rd Party Track Tensioner like the AFV-Modellbau ones but may also work with the kit supplied ones.…
Used to use a two-part Mould for making the Family's Recipe Herbed Butter Rolls which was a bit of a pain in the ass to work with as one half would wander of while the other was being prepared so here's a hinged Print in Place version for…
Print Instructions: I'd suggest you use ”Weatherproof" Filament to print the Parts from - Don't want the parts to become brittle from UV / the Cold or melt in the heat of the Sun 😁 Print with the usual Voron recommended 4x Perimeter / 40%…
I wasn't exactly pleased with how wobbly the P3 Thermal Camera was attached to my iPhone 16 Pro Max without a Case so I made a Gap filling Spacer to go between the two that will eliminate the wobbliness in particular when adjusting the…
I needed a longer solution for clearing Clogs out of my fully assembled Tool Head than what commercially available solutions could provide so I made my own out of a 200mm long, 1.7mm Diameter Stainless Steel Rod for which I 3D Printed a…
Could no longer find the Model of the Download I used before so I made my own - Nothing too fancy besides a feature to put in your Nail or a flat Screwdriver in to pry it off again when no longer needed or needed elsewhere. Clip it into…
A Magnetic Tool Storage System for the Tamiya branded High Quality Plastic Modelling Files: Tamiya #74058 16mm Flat Tamiya #74059 10mm Flat Tamiya #47069 6mm Flat Tamiya #47063 10mm Half-Round Tamiya #47070 6mm Round Requires 10 8x3mm…
A tetrahedral Stand for one of those Hygrometers that can be used in DIY Filament Dryer Boxes. After building my Dryer Box I left with a bunch of spares and just having them lying around wasn't quite cutting it, so I made a Stand for…
The stock Metal Cover blocks all visual access to the Controllers Status LEDs as such replacing it with a transparent one will solve that visibility problem. The New Cover was also redesigned to be a bit larger in all directions providing…
Slide it over the Tool Head Shell from the front to secure it to the Z-Axis Plate. The Model is designed with a pretension bends in it and may require some persuasion. If it absolutely won't fit onto the Assembly, then changing the…
Best used with Flat Head Screws in the M4-M4.5mm Range. The Diameter is 48mm and the Thickness is 10mm with a 9mm Tube Insertion Depth. The centrally located Cross Cutout can serve as an Alignment Feature.
A small stand to hold the four - currently available - GodHand 4mm HEX-Drill Bit Storage Boxes and an accompanying GodHand Drill Bit Handle . The four slots are 55x10mm each and the Hole has a ⌀ of 11mm . Print either facing up or down (…
The Print does not require any Supports regardless of whether you print it upright or upside down but I DO suggest using a Brim . The Model is also designed to use Fuzzy Skin in the recessed Area ( Paint into it with the Bucket Tool ): As…
Info: Needed a solution to ensure the holes for installing a floating shelf would end up perpendicular to the Wall Surface and a Tool mounted Spirit Level seemed like a good solution so a 3D Scan and some CAD Modelling later we have…
The Model was designed to be printed with a 0.40mm Nozzle and a 0.10mm Layer Height for everything but the first Layer which can be left at 0.20mm to not be causing any issues with textured Beds. Track Links can be inserted either…
My particular Radio now has 3-Axis Gimbals with increased Size / Length thus the increased Depth of the Jig. This makes it possible to Service the Radio ( like the occasional RTC Battery Change ) without potentially breaking something.…
These are all currently available results.
