Counting matching models…
I tried the dilator by @Rieva_1598535 but it pinched my septum even when scaled up, so I redrew it based on the sketch provided. I also made the ‘paddles’ a bit deeper and reduced the depth of the ‘frame’. The F3D file is included in case…
This is a fairly close copy of the primary speech module of an Avon S10 respirator. It's intended for cosplay, display etc, for example making a replacement in UV-reactive, glow in the dark filament, or a different colour to match a…
This is a battery mount/shim to fit a Di2 battery in the seatpost of a Colnago C64. The wall thickness of mine is quite variable and there are seams, so I made two versions to test the fit, and have uploaded both. What also might work is…
This is a set of lens rims for an S10 respirator, intended for cosplay/decorative/re-enactment/airsoft use. They should snap-fit easily, but it might take a little bit of force, depending on filament and printing methods. Support…
I often store my regulator in a dusty area, so I made this cover to screw on the end to help keep dust/dirt from getting in. Most regulators do have a mesh screen inside but you still don't want any more dust than necessary getting in.…
This is a remix of a model by TzOk, I have made it slightly deeper and added screw holes side mounting tabs for ease of use. M2.5 machine screws self-tap into the matrix keypad's frame quite nicely. The tab holes are M2.5 but M3 is…
I liked the design by @tpc_516603 but took note of them saying theirs was a little too big, so I made a new version from scratch. This one is a pretty close snap-fit, and I made it very minimal, the base and ‘arms’ are 2mm thick. I…
This is a port cover for an S10 respirator, intended for cosplay/decorative/re-enactment/airsoft use. It should snap-fit easily, but it might take a little bit of force, depending on filament and printing methods. They fit slightly loose,…
I realised my Peli/Pelicam Storm iM2975 case was hard to pull, and on getting home I spun a wheel - ooops, yes it's trashed! I removed the wheel and saw that the bearing is non-standard, they have little stub-axle type things, one has a…
This makes removing a speech module from an S10 easy. Use with a 1" spanner, adjustable wrench, or just your fingers. The module will then pop out when pushed from the rear. I found using a flat screwdriver at the edges effective. If you…
I bought a Global M704 microscope which came without eyepiece cups. For this microscope your eyes need to be a pretty specific distance from the eyepiece otherwise it's basically unusable. This model is intended to replicate the M1039A 1…
I made this to quickly allow me to fit a 1/4" BSP PCL XF coupling to a compressor which only had an M16x1 female socket (fairly unusual). It should be rugged enough for one-off usage, I'd recommend a metal fitting for long-term use, and…
Inspired by signs seen on a video about conventions in Japan/Korea, this is designed to be (carefully) attached to a hotel door to show what you are currently up to, and to hold "business cards". Perhaps attach using Blu Tack on the back…
3DQF filament comes on very flimsy cardboard spools, which are pretty much unusable in my Bambu AMS, due to the rim deforming and not rolling properly. I found a few other rims on here, but they were unsuitable for a few reasons - one was…
This is a pretty neat PCB you can get very cheaply off AliExpress. You can plug in a USB-C PD power supply and get 5/9/12/15/20V out. You can either switch the output using the button or (better) solder a wire link on the rear to fix the…
This is an adapter to connect a regular Henry vacuum cleaner to the dust extraction of an Inca bandsaw with a ~53mm port. Mine is a 1980s “Euro 260” model, but I assume they all have the same port. v4 is the original version and which I…
I bought a Global M704 microscope and don't need to use the halogen fibre optic illumination. This model will screw in and plug the unused fibre socket on the microscope body, keeping dust and light out. This model will probably work on…
Quite a few of the W&H Lisa autoclaves are coming onto the surplus market here. You can plumb it in from the back, but for most users it's probably easier to manually fill it from the top and drain dirty water from the front (the left…
I bought a used Global M704 microscope, and the objective lens did not have a cap. This model fits snugly when printed in PLA. The lens on my microscope is M1028-250, but I think it would probably fit any of their objective lenses.…
This is a case for a USB-C power/data splitter sold on AliExpress . It's described as "USB Power Splitter for Raspberry Pi BliKVM & KVM "KVM over IP" HDMI-compatible CSI 1 IN 2 Type-C Power Splitter" and has the brand "Blicube" printed on…
The laser power knob on my Omtech K40+ can be moved very easily, just by brushing a hand. This is obviously pretty bad for multiple reasons. This cover will fit over the top of the unit (which has "ZYE Laser" on the display) and prevent…
The end cap for my Exposure Switch fell off. They do apparently have excellent customer service and I could get a replacement/repair, but I decided to make my own. Firstly for the challenge, and secondly because I think a deeper cap might…
The Loop speaker is a pretty nice design, but it's quite thin and a little top-heavy and risks falling over, which might damage the screen. This is a simple stand with feet to keep it stable. The Loop fits in snugly and the stand will…
I store my superglue (cyanoacrylate) bottles in the fridge, because it's supposed to extend the life, however they keep falling over. This is a simple rack to keep them upright. It's intended for "Everbuild" 20g bottles, from Toolstation,…
Quite a few of the W&H Lisa autoclaves are coming onto the surplus market here, but many seem to be missing the top cover where you refill it with water. This is important for keeping dust and debris out of the water tank, and is probably…
This is a modelled replica of the Betalight S.P.I. “Soldier's Personal Illuminator”. This is a device which has tritium vials mounted on a small stick, with a rotating shutter which can be turned to show a window, arrow or a small dot.…
I bought a USB volume control knob off AliExpress , and while it works very well, the casing was made from laser cut acrylic and not really what I want. I wanted to mount it in my car to use with an Android Auto head unit, so I also…
I am investigating a Klaxon Sonos sounder with a view to some fun modifications. The main unit's base/PCB is attached to the outer shell using 3x clips. I made this tool to separate them cleanly and easily without damage. Simply push the…
When disassembling a Varian x-ray housing, the terminal sleeve is held in place by a threaded plate with 3 pin holes. I made this tool to enable this plate to be easily spun out (and replaced, if you need). The housing I have disassembled…
These are all currently available results.
