Counting matching models…
UPDATE 16/8/2024 Somehow I uploaded bad spring design but now it should be okay. If it does not work try pulling the spring out a bit or cut it a little shorter. In case of any problems do not hesitate to reach me in the comments. (I was…
Not too much to it. With season 2 coming up this game can be a nice addition to a Christmas party or a gathering. Printing: No supports, 3 perimeters. They work great, unfortunately I chose poor dough that is rising too much (as you can…
UPDATE 21/02/2025: Added looser and loosest fitting core pieces, that are easier to assemble the core of the robot, but the parts might fall out easier. This cute little robot is armed and is ready to defend its territory. Its flexible…
The main difference between this box and so many others is more robust locks and hinges, that do not break so easily. Additional hardware: 3x M3x35 mm bolts (hinge, lock) Printing: Easy print, no supports, at least 3 perimeters. I prefer…
UPDATE 2024/29/05: Added holder for stone 51,2x19,6 mm. Name is KSJ-06-06. UPDATE 2024/31/03: Added revolving grinding stone holders. KSJ-06-04 is for attaching three stones at once and KSJ-06-05 is for attaching four stones. That means…
I came across a "straight one-way manual hand drill" by "zhwang168" "https://www.thingiverse.com/thing:4740760". I really liked his design so I followed his tutorial and made a bit wider and longer version with space for a 608RS ball…
I want to make some rings but if they are thin, they are difficult to hold. Moreover if you want to make a nice uniform surface the easiest thing is to mount it on a drill and use files, sandpaper to smoothen the outside. So you insert a…
Do you want to print cute multicolour bees? You do not have a MMU or AMS? Than this print is everything you want. These bees are ideal toys for bigger kids, young in mind adults and for decoration. There is a hole for 6x2 round magnet and…
I came across a few of these laptop holders, but none of them could be stored together and if they did they did not lock in place. Therefore I made my own and first try it worked. You can insert one of the holders to the second one and…
[UPDATE 17.06.2025 - added new versions of TK-02 “the base”. I have been carrying this knife everyday in my pocket since publishing and on two occasions TK-03 “the lock” fell off the knife. To prevent this I added bigger bump on TK-02…
I was asked to print forest animal footprint stamps, which are going to be used on children educational trail. I designed several animals which you can come across in the forest plus a every kids favorite animal - a T-rex. Every stamp has…
Basic rugged box for super special tasks. Features - snap locks with satisfying clicks, heavy duty friction hinges, locking groove for the lid (with posibility to add TPU gasket - just remove the lids lip and insert TPU filament into the…
I made three models of flowerpots. One is full voronoi design so a cover for flower pot the second one has water tray included and the third one is full flowerpot. The dimensions are: height 100 mm, bigger diameter 120 mm, smaller…
Why? What is a pill reminder? It is for those that forget whether they took the pill that day or not. After you take the pill simply slide the switch with the corresponding day and you are done. When you are wondering later the same day…
The first picture shows how it might look and the second one how it looks right now. For this vertical garden you will need a 110 mm PVC tube, 73 mm hole saw and some base. Just cut the 73 mm holes in the tube in a pattern of your liking,…
This game lets you test your fine motor skills as well as your chemistry knowledge. The game features several basic elements with connecting points placed accordingly. The size ratio of the spheres is the same as the actual elements. To…
I was browsing some toothbrush holders and came across tooth paste squeezers. So I thought to myself why not combine these two. This holder has two holes for toothbrushes a hole for toothpaste (wide and narrow cap). The right side has its…
I remixed this great model to suite my needs. Made the walls thinner and modified some tolerances which resulted in quicker printing time and less material used. I remodeled it from scratch and attached STEP files for better…
In work we sometimes use letter punches for marking metal. But it is so hard to make the lettering straight. So I designed this simple jig to help with alignment. Simply insert your 12x12 mm punch into the insert and position it to the…
I liked the model Engagement ring box cryptex from tecnao but did not have any foam at hand. So I designed this insert to be printed from 95A Shore TPU. It does not go all the length of the box for ease of installing and removing. It…
You can tie shoelaces to this print as you would to the normal shoes to practice tying knots and loops. Printing: This is an easy print that does not need supports. I would suggest to use higher perimeter count to add rigidity - around 5.…
This is ideal thing for activity board that your baby can play with during tummy time. It has bright colours and moves quite fast because of really big pitch. The screw is two way, that means that you can use either left or right nut.…
This in my first print for baby activity board. It lets them connect color, shape and it snaps in place thanks to magnet. Make sure you glue down the magnets (6x2mm) so they cannot detach. Just use regular wood screws to attach it to…
Simple snap in socks holder to clip on clothes dryer to save some space. It prints without supports, you just need to press in the hooks and you can hang it onto the clothes dryer. I uploaded version with 12 spots for socks. There are two…
Mechanism of this rugged box makes the tools popup for easier access and more convenient handling. It is for a set of 4-12, 4-20, 4-20, 4-32 step drills. The main difference between this box and so many others is more robust locks and…
This stylish holder is primarily designed for interdental brushes but you can use it for whatever you need. It has integrated slope and draining channels as well as place for non-slip pads (d=8mm). Printing: This is a really easy print…
Description This is a classic pull toy for toddlers and kids that you can easily print yourself. It features a nodding head, swinging ears, rolling wheels, and a "jumping" back mechanism that wiggles the tail as it moves. The dog can even…
This is ideal for babys tummy time to watch something colorful, that they can play with. Or for cats to destroy. Printing : Use 3 perimeters for the balls but at least 5 for the rest (for added rigidity), everything 15% adaptive cubic…
Printing: This spice rack is an easy print without supports. The parts are already oriented. It holds 10 rectangular glass spices containers(45x45x109 mm). There are three plates: RACK-01 (front + mid) - print that 2x and RACK-03 (back).…
This is another print for my activity board. It is a classical pyramid with not so classical shape of a spilled milk. Print it all in different colours, preferably put a long screw through the rod and watch your kid stacking it perfectly…
The Concept: Precision vertical lifting mechanism (20mm) using a horizontal wedge and screw allowing managing different heights of parts or wear of the grinding wheel. It is used for precise grinding of round object faces. But there is…
A universal, fully adjustable paper towel holder engineered for convenience and stability. Thanks to the fine-tuning mechanism, you can adjust the tension perfectly so that the roll spins smoothly when pulling, yet provides enough…
This is an easy ratchet print that assembles using two small screws, has a place for either one or two springs - just choose the stiffness you prefer and is board mounted using another two screw because I wanted it to attach it to kids…
This is a model made from a photo of real chapel in Czech Republic. I was asked to model it and somehow attach it to a cork to make wine bottle stoppers symbolizing the village. I plan to buy tapered cork from aliexpress . I came up with…
I got a shoe rack for free but have no use for it so by printing some custom connectors I remade it into a coats hanger. The shoe rack had also rotten fabric which tore really easily, so I kept only those in the best shape to be used in…
Mechanism of this rugged box makes the tools popup for easier access and more convenient handling. It is for a set of 6 chamfering bits sizes 6,3 - 8,3 - 10,4 - 12,4 - 16,5 - 20,5. The main difference between this box and so many others…
This is an easy print that fits on regular printers in one piece. Just print the colourful pucks, the base and glue some acrylic on top. Printing: You do not need supports. The base is thin on purpose to save filament. The acrylic piece…
This holder is for those that wear rings and need to put them down from time to time. For example to make some dough, take a shower or anything messy. There are two types. One is without washer and the second one is for DIN440 - M12…
Description: This 3D print is an insert into full or empty filament spool which features 3 bolts and flexible parts to accommodate different tree trunk diameters. It is suitable for rolls of filament that have inner hole diameter of 50 -…
A custom-designed 90° drill guide tailored specifically for the Parkside PSBSA 20-Li C3 cordless hammer drill. It helps you keep your drill perpendicular to the surface when you need clean, straight, and precise holes without using a…
This is a specialized spacer/stopper designed to solve the common issue of plastic gutter guards sagging or shifting over time. It provides a solid support structure that keeps the mesh elevated and properly aligned, ensuring maximum…
These are all currently available results.
