Counting matching models…
Edit 5/18: Changed license to comply with the original Edit 7/4: Added additional folding parts for rigidity and improved clearances. Very thin folding phone stand that can slip into a wallet or the back of a phone case. Works fine with…
This is a remix of https://www.thingiverse.com/thing:4718232 Supplies: Superglue Blue Tape (optional) Printing Instructions: Use 0.1mm layer height for best results Use the .3mf file with custom supports or use build plate supports…
v17: Fixed issue with lid grips not changing when the lid height is changed. A simple screw top container made in fusion 360. Print at 0.2mm layer height if you are using the default thread parameters (0.75mm). I recommend printing out…
This is a remix of https://www.thingiverse.com/thing:4718232 Print at 0.12mm layer height with supports on build plate. Assembly instructions (See images below for reference): Remove support block from under the back of "Turret Top.stl"…
This is an enclosure to keep a RAK Wireless RAK19003 base and its RAK4630 LoRa module on the back of a Magsafe compatible phone for use with Meshtastic. It adds about 16mm to the total thickness of the phone. It can also be stuck to flat…
Description: An opening pick similar to the iFixit one for prying open electronics and slicing apart adhesives. There are 2 versions: the 0.6mm version is more flexible and closer to the original iFixit opening pick's 0.5mm thickness…
A very small pc with internal components. The .STEP file is included if you want to create your own components for it. Print with resin for best results. The side panel is optional and can be printed with clear resin You can get a…
Calibration cube with a city on the inside. There is a lot of fine details to test your printer. Mine just looked like some spikes in a cube. Print Settings Printer Brand: Monoprice Printer: Mini Delta Rafts: Doesn't Matter Supports: No…
v10 update: better serrated edge and toothpick For use when you don't have any utensils but have a 3d printer nearby. Same length as a credit card so you can put it in your wallet. .f3d and .step files are included if you wish to modify…
This is a case for the Wio Tracker L1 from Seeed Studio which can fit the Meshnology 3000mah 755060 battery. Makes a good standalone Meshtastic device with the new firmware which has the virtual keyboard. Update 6/12/2026: Added step…
Update4; Added step file Update3: new f360 file for new version. Update2: Uploaded new version. Better reloading. Update: Print on side with text facing up. Needs no supports A simple toothpick launcher designed in fusion 360 It launches…
A utensil consisting of a deep flat bowl attached to a thick handle. You can use it to move food into your mouth. Prints without supports. Important: If you want to use this more than once, seal it with a food safe resin or epoxy. Print…
A crashed Star destroyer. Print Settings Printer Brand: Creality Printer: Ender 5 Rafts: Doesn't Matter Supports: Yes Resolution: 0.2 Infill: 15% Filament: […
A mold to make 1/10 scale cinderblocks with. Can be used with Plaster of Paris or Quick repair concrete. The PLA version is single use but the TPU version could in theory be used many times but I have not tested it yet. Instructions for…
A small Altoids tin pan fishing reel that requires no extra hardware (except for zip-ties and a stick) to put together. Should be able to catch bluegills and other small fish. Contains a integrated print in place slide bearing that will…
This is a protective case for the Seeed SenseCAP T1000-E which lets it attach to Magsafe compatible phones. It is only 9.5mm thick and gives access to the button and the charging port on the back. There is also a slot cut out for a…
A bulb duster that is designed to be printed in TPU and PLA. Print "bulb" with flat side down and "tip" pointing up. Superglue the tip in place if it falls out. I have also included the f3d and step files if you want to modify it. Print…
A drink coaster in the shape of the RTX 5090 founders edition's main PCB assembly. Should be pretty close to actual size. Multi color and single color files are available. All of the major components should be represented fairly…
Update 2023/8/19: Added a wrist rest to go with the keyboard I really liked 3DPrintSOS's SiCK-68 keyboard so I designed my own with some improvements. Features: More compact Cleaner exterior (less seams) Prints in less prints on a…
A sunshade for the original mavic mini. No supports are needed and it takes around an hour to print both parts. As this is mostly friction fit, I have included 2 versions of the bracket with different tolerances. You can also adjust the…
Print with 0.1mm layer height to get a cleaner look. Tolerances around the hinge are tight so you may need a hobby knife or some sandpaper to trim down the hinge components to fit. Supports are not required and I have included 4 stickers…
A pi zero case that I made around a year ago. Should be compatible with the Zero W and the Zero 2. Will work with the original Zero but the heat-sink cutout will be off. The sd card is fully encased within the case to prevent it from…
I liked flol3622's Legion Foldable Legs because the small hinges were surprisingly strong so I remixed it to stick to any laptop with some double sided tape. Tolerances are a bit tight because of the small size so you may need to sand or…
A cable organizer for the 67W Apple power adapter based off of @Carbonbydefau_22485's design. Parameters in the fusion 360 file can be edited to fit different Apple power adapters. Use a strip of double sided tape to affix the organizer…
This card includes various basic tools for working with clay. It has the same length and width of a common credit card, though it is a bit thicker. Might be good for a survival kit or something. For best results, print with a 0.4mm nozzle…
A switch opener with a compliant spring mechanism to help crack open many switches quickly. Also helps keep parts from flying everywhere once the switch pops open. Includes swappable inserts for opening both Kailh (2 clips) and Cherry (4…
A showcase for MX mechanical switches with spots for small info labels on the front. Available in 1x, 2x, 3x, 4x, 6x, 12x, and 30x switch capacity versions. Print the showcase at 0.20mm layer height without supports. Key switches should…
A Raspberry Pi Pico based hand-wired macropad with 8 keys that runs on KMK Firmware. .STEP and .F3D files are included for remixing purposes. Also happens to be in the shape of a paw. Materials: 2x M3*10 socket head screws Raspberry Pi…
12/12 update: the moss seems to be alive and doing well Update: New staircase version A simple nano terrarium made from a tic tac box. You will need: Empty box of tic tacs Some moss Small plants Water Dirt Activated Carbon Instructions:…
A very small Aerogarden with a removable water bowl and grow deck. STEP and f3d files are included if you wanted to modify it Can be printed with both Resin and Plastic. See print settings and post printing for instructions. Print…
Uses green, black, white, and yellow/gold filament. Print at 0.1-0.2mm layer height. Has a 4mm hole for a keyring. You can either write your name on the label after printing it, model it on in tinkercad or another program, or edit “Sketch…
Original Thing (you will need parts from it): https://www.thingiverse.com/thing:2746430 I noticed that a Raspberry Pi 3A+ fit nearly perfectly in the Macpi Pro Tiny V2.1 so I designed some parts to properly fit one in. This would probably…
A slim keychain case for the Adafruit Neo Trinkey. A piece of thin double sided tape is required to stick the parts together. Its kind of flimsy where the end of the end of the PCB meets the keychain hole but it would likely be fine to…
About This is a case for a RAK19003 baseboard and a RAK4630. Designed to be water resistant with minimal openings and a screw in lid with a TPU gasket (actual waterproofness may vary). Powered by an 18650 battery. RAK19007 should fit as…
This is a TPU case for the INIU BI-B63 25000mah power bank to hopefully make it more rugged and less slippery. Includes a 1 in wide loop for webbing or other things. I used this 95A TPU filament: https://www.amazon.com/dp/B07QLRWZWP…
This is a tool for removing or installing the button bezel on Wurkkos/Sofirn branded flashlights with the translucent 15mm wide button like the one shown below. 0.4mm nozzle and 0.2mm layer height is recommended. Print STL in default…
This is an attachment for the Wuben X5 which adds a ZWB2 filter in front of the UV led to reduce visible light interference for better fluorescence. It uses a cheap and widely available filter for the Convoy T2/T3. This attachment can be…
These are all currently available results.
