Counting matching models…
These are two Wahl clipper guides in 2 inch (50mm) and 1.5 inch (37mm) sizes. Should work with most 1.87 inch (47.6mm) max. wide Wahl style clipper blades. They are intended to be used with the clipper horizontally, on the side parallel…
Yet more DJI Mini/Mini 2 Landing Gear Extensions. These are light, about 5.5 g for all four. They add about an inch (25mm) to the height. I used PETg, but they should be fine with other materials. I used .20mm layers. Could have used .15,…
This is a set of dough scrapers and cutters. They are 1.5mm, 2mm and 3mm thick, giving you more flexible or stiffer dough tools. I use the 1.5mm thick one the most because it bends to conform to different mixing bowls that i use. I…
This template will help you align and drill the necessary 3 holes for a Euro Concealed Hinge. Use 50% infill and 3 top, bottom and vertical layers. Save $10+. Mark door for hinge centerline on inside face or edge of door. Align with "V"…
Update: Added no logo 100mm version, removed all others. You can scale larger (or smaller) from the 100mm (~4") version. Stretching in Z only, taller or shorter, yields some interesting versions. This is the first in a series of twisted…
This is a remix of Klein CL220/CL390 Clamp Meter Hanger Clip which should work for all these models that I am aware of: CL800, CL900, CL700, CL600, CL450, CL440, CL390, CL220, CL120, MM600, MM400, MM300. There could be more models. If you…
WARNING: DO NOT USE A TEALIGHT CANDLE WITHOUT IT'S METAL PAN! ALWAYS USE ON A NON FLAMMABLE SURFACE, SUCH AS, A NON FLAMMABLE COUNTERTOP, 6" CERAMIC TILE, OR SAUCER. KEEP OUT OF THE REACH OF SMALL CHILDREN AND ANIMALS. This is a tea…
SEE UPDATE: https://www.printables.com/model/374454-coffee-filter-cone-for-generic-paper-filters-v2 I have used a pour over Melitta coffee cone for decades. I use generic drip filters instead of the Melitta cone filters, which do not fit…
This is both a bracelet and a fidget toy design. They all (except possibly the double tall version) can be rolled inward or outward 180 degrees to yield a different design (see second photo). The square with a circle in the middle will…
I have a Taz 4/5 and a Taz 6. I made a top mounted spool holded for my Taz 6 and found the the slots in the 2020 extrusions were 5mm instead of the 6mm wide on the older model. I have metal T-nuts I bought on Amazon , but they are 6mm…
Update: added some cleaner files I wanted to convert my E3D Titan Aero from 3mm to 1.75mm filament. I knew you needed a new filament guide, and heat break, but also found out you need to replace the heatsink lid becaues the heat breaks…
Update 09/15/18: Added updated model, quadracopiasqrupd.stl, for the square version to remove the small points at the top and bottom. Another solid sculpture which needs to be printed in Corkscrew/Vase/Spiral (single wall) mode, no top…
NEW DESIGN 02/17/2016: OLD DESIGN IS TOO WIDE! NEW DESIGN USES LESS MATERIAL. This version is much smaller and incorporates a more versatile tray mounting pattern and greater strength. Note that one end has a higher wall, so the drive…
Note: added PETg gcode. Meant to use PLA. Is what it is. The two gcode files are not single wall spiral. They are set up for 2 vertical walls. I wanted something a bit beefier. Four different versions for your 3D printing pleasure.…
Duplicate 4 or 6 times in slicer as necessary after setting up first bead. I use .16mm layers and just plain PLA. I seem to have more issues with the holes using silk PLA, but if you don't mind a little cleanup than try silk or other…
UPDATE 10/25/21: Improved lock, handle and cover. Make sure lock clicks when closed. Align blade before locking. The cover and handle have two arrows that align, and it is very difficult to push cover on the wrong way. Magnet is from Home…
This design is intended for corkscrew, vase mode, single wall printing. I used Prusament PLA. .2mm layers. Use 5 or 6 bottom layers, zero top layers. Use ballast for stability; marbles, small river rock. You can also use 2 walls thick. 5…
This is a design for modifying a COSORI 11.62" Food Dehydrator CFD-N051-W; 350W--will NOT fit the Cosori CFD165FD 13.8" 450W model! . The shell allows drying two spools of filament at a time. I used Polymaker Transparent PETg. On the…
Printed on my Original Prusa i3MK3s. .2mm SPEED default layers, no support. I used PLA, but PETg should work well. I did not consider any filament I won to be clear enough, but you might have something that is. Not really important to me.…
Revision 030823: Added new open version and corresponding gcode file. Revision 020415: Added vase9a-half-open-2 version with thickened cage. Revision 020315: Per the request in the comments by hgcl, I have added a -2 version of the fully…
Update: see universal version for additional models. The unique screw hole location on the back makes this version only work with the CL220 or CL390 model for now (reported CL120 will also work with this design by sheeds71). If I can get…
I remixed this from the model by stepanp21, https://www.thingiverse.com/thing:1779983 . "...the Sudanese Möbius Band, where 'sudanese' refers not to the country Sudan, but to the names of two topologists, Sue Goodman and Daniel Asimov." I…
This is a multi-color LED decor that will go for days on one CR2032 battery. After trying to find a cheap LED base that works worth a darn, I finally gave up and created one that works reliably and doesn't cost a lot. The base utilizes a…
If you have not printed yet, use the -2 versions. Not a lot of difference and your slicer may make it a non-issue anyway. You should print in the position the .stl files are already oriented. I used .15mm layers, 2 side layers, 3 top and…
There basically are two designs included in this suite. One has separate legs and the other design does not. One is a two wall version not intended to be printed in spiral vase mode. All the others are intended to be printed as a…
I like Printable Hobby Knife by pggibson. After decades of suffering through using stock aluminum handles, which tend to loosen and/or seize up, I have found this design to be much better. this design should work with #s 11, 10 15 and…
This tool is for marking the miter for a 90 deg 3/4" bullnose drywall edge. The tool will mark right hand or left hand miters as needed. There are two versions. One with relieved corners and the other without, so you can cut excess corner…
A new part shape for an equal 3 part cube puzzle This one divides the cube in a different manner than my last CUBE.orig 3 Part Puzzle. This one does not need any support or bridging. This print was done using Prusament PLA at .15mm. The…
A baker's dozen of winter decor models and gcode. Used a Prusa i3 mk3s+. Prusament PLA. .20mm layers, speed. If any seem loose, use a touch of gel CA glue. Most should be a friction fit, and some may require some steady pressure to fully…
This is a replacement wall hanger bracket for Black & Decker Dustbusters similar to V1320 and V1410 types. The 3D printed version emulates the stock design. The first photo is the 3D printed version, and the second photo is the stock…
Updated: Added a lid for the straight QuadraVase. The lid is scaled to 150% for scaled 150mm QuadraVase. I added a scaled 150% vase as well. If you want the lid for the 100% (100mm) vase, scale the lid to 15.52mm (66.7%). The lid will fit…
Another vase for the queen or princesses of the house for this Winter Solstice holiday season. This one is not filled but has two outer walls and a center tube for dried flowers, etc. The open shape surrounding the central tube is…
A few finial designs that can be used for tree or window ornaments, desk art, overhead light/fan pull. Four basic designs, two with a middle support (files with the word “strut” in the filename), and two without a center support. The…
This is an update to a design I recently designed and posted on Thingyverse (not a fan of that platform, their programming, policies and ads). There are two versions, one plain which is intended to be printed in three colors in a vertical…
This is a suite of files. The first two, Octofallopio1 and OctoFallopio-NoTop, are single wall vase mode, corkscrew, designs. The two files are ~152mm tall, but of course you can scale or slice them to make a bowl, for instance. However,…
I have progressed beyond this to working on a gimbaled version, but thought someone might want to use these files which I used on my testbed Phantom a couple of months ago. I will post the sequel with a controller when I get it finished.…
here's some matching bowls for Vase10A. (Turbo-Vase+, the Sequel). Scaled 1X and 2X Category: Sculptures
Another set of things to print. Bowl 7 gets a lid. Bowl8a-1.5 is a stretched and scaled model of a previous TurBowl using Simplify3D. This should give you an idea to alter the other designs to make your own designs. Lid knob made bigger…
Added a new version 02/26/15: opened rubber mount holes, relief for rubber flange, trimmed boss to accommodate 2D gimbal bracket. This camera mount plate can be used for both the bottom and top mounting plates. The bosses against the…
Here's some more bowls. Scale 'em. Stretch 'em. Trade 'em, collect 'em. More to come in Turbowlz II... Note print of bowl8a-open: I don't know but for relatively high speed .33mm layers, I am amazed that this even printed with NO support!…
After trying numerous methods to get the parts to print correctly, I determined that the unusual printing position produced the best overall smooth surfaces. Print 3 identical parts. Scaling not recommended without tolerance re-design.…
This button is for adding a neck strap for your guitar, or other stringed instrument. It is similar to the ones sold on eBay and the one Martin sells. Test before use! It is your responsibility. I use, Guitar Savers Premium Strap Locks,…
After getting jammed in the kidneys with the protruding shaft on my CNC machine's NEMA23 stepper motors, I cut down some half liter water bottles to cover the end of the motors. They worked somewhat, but got knocked of easily and I…
This is a substitute handle (body & handle) for the great design by Gyrobot. A bit more ergonomic and adds a magnet to hang on a steel surface. Safety cover is the same as original at: https://www.thingiverse.com/thing:40487/files ,…
UPDATED .STL FILES FOR BETTER FIT 06/30/16. TWO NEWER VERSIONS, BETTER FIT. I have a Kenmore 106.72153111 23 CUFT refrigerator in stainless steel. I has nice brushed aluminum handles, but one end (of each) has a poorly designed gray…
ADDED GROUPS OF 4: 4 OF EACH AND 2 OF EACH FOR EASIER PRINTING This is an updated design for the DJI Phantom 6mm self locking blades. Old version: http://www.thingiverse.com/thing:516376 This one is a little larger and has a larger base…
UPDATED: new files for more even leg length, added indicator for longer side screw distance (triangle). (see cover for Se-450-24: https://www.thingiverse.com/thing:2556126 ) I replaced my stock Taz power supply with a Mean Well SE-450-24.…
These models are intended for single wall mode, but can be printed normally with two walls or more with normal fill. If you scale and use single wall mode , process (slice) the file and use the slider to determine at what layer the scroll…
FLIGHT TEST VIDEO AT: http://youtu.be/fK3oITBfANo Once again I have modified the left front leg mount to kick it out to the left a bit more: see m2-lft-frnt-3hole.stl. This replaces phan-mnt-m2-5deg-left-front.stl. The latter will still…
UPDATED 09/02/2017: Strut mount gussets beefed up. See m1-15deg-comp-mnt-v3.stl see new .stl file! I updated this design to be stronger: http://www.thingiverse.com/thing:520060 See that version for compass mount details. You can increase…
OBSOLETE Updated design here: http://www.thingiverse.com/thing:743731 New 11/11/14: Added round foot pad--this one does not need aligning! I will definitely use them from now on. Foot pads also protect the carbon fiber rod from…
This update creates a tighter seal than my previous design. I can be used for various needs for CPAP machines, 3D printer cooling and woodworking masks, etc., that use CPAP 22mm hoses. Category: Replacement Parts
THIS DESIGN HAS BEEN UPDATED. SEE: http://www.thingiverse.com/thing:737600 This file will print end adapters for 3mm rod for balancing self tightening 6mm CCW and CW blades as used on a DJI Phantom ande others. I used polished 3mm tool…
These are two preliminary saddle slides for Lanakai TunaUke ukuleles. The short and tall stock versions. They should work on any size TunaUke, baritone, concert, tenor. I was having a problem finding spares that came with the instrument…
These are all currently available results.
