Counting matching models…
Remixed from WalRits design. I liked the figures made by WalRit and here they are in STL instead of OBJ. I made another kind of lock which fits the pieces a bit better. I also made another ways of splitting the impostor as well as saved…
If you like my designs please consider donating a coffee or any amount really, I appreciate the gesture. https://www.paypal.com/donate/?hosted_button_id=QEF27KJ6FXGM6
Another remix, this time at 60% size of the original and solid, not in two parts. I added two small holes for a metal wire which a key chain ring can be attached. Bend a wire (~35mm) and insert into the holes on the top. Cross the wires…
If you like my designs please consider donating a coffee or any amount really, I appreciate the gesture. https://www.paypal.com/donate/?hosted_button_id=QEF27KJ6FXGM6
An assortment of knobs for hex head nuts and screws. I have some variations with different diameters and spacers. Please contact me if you need a dimension that's missing and I'll see if I can add it. :) If you like my designs please…
I needed a lens cap for my Raynox-250 macro lens to go with the rear cover I designed earlier. After some modifications to make it easier to adjust dimensions I've uploaded more cap sizes. Print without support. After print, place the cap…
Clamp for CNC with knob and slot nut for M6 hex screw. If you like my designs please consider donating a coffee or any amount really, I appreciate the gesture. https://www.paypal.com/donate/?hosted_button_id=QEF27KJ6FXGM6
I made these plates since I just don't have enough original LEGO plates to mount the minifigures on. Works well to print in 0.3mm and without support.
Inspired by Kernel770's tripod I re-designed it from scratch. :) The camPad is printed in flexible TPU and the rest in ecoPLA. The 1/4-screw is held in place by a small piece of filament glued in place by CA-glue. Support is recommended…
An easy to make speaker enclosure for a 40mm speaker. This speaker is often packed with the popular DFplayer MP3-player. The holes in the lid fit M3 countersunk screw. The holes in the box are tapped with an M3 tap. If you like my designs…
This is an XS version of the tripod I re-designed inspired by Kernel770's tripod. It was primarily designed for those with really small 3.5in³ printers and has shorter legs. In all other aspects it is identical to my larger tripod. It can…
This is a remix of SMD Component Storage by Oleksandr Shepetko found on hackster.io: https://www.hackster.io/ashep/smd-component-storage-761d4b I made another type of lid with a place for snap-on labels. The labels are made with two…
If you like my designs please consider donating a coffee or any amount really, I appreciate the gesture. https://www.paypal.com/donate/?hosted_button_id=QEF27KJ6FXGM6
Tired of the hose laying on the ground I made a holder for the spray gun. The clamp has a diameter of 22,5mm and is held together by four M4 screws and nyloc nuts. PS: The print was rushed at 145mm/s so the quality of the part in the…
If you like my designs please consider donating a coffee or any amount really, I appreciate the gesture. https://www.paypal.com/donate/?hosted_button_id=QEF27KJ6FXGM6
I frequently use thin wrapping cable for various electronics projects. These come cheap in multi-color spools. To easily chose the exact color I want I made spools for one color each. Just unspool the original cables and use an screw…
Designed this simple yet rugged wall mount for the great minifig hexagons. :) I chose to put the front side on a textured bed for better look but also to get it slightly stronger. Can be printed without infill. There's two versions, one…
Nose for Heewing T2 Cruza specifically designed for the CADDX GM3 and HEQ (WIP) 3-axis gimbals. The nose is shorter than original so new fuselage mounts are needed. I've made extensions so the original can still be mounted. A custom…
With this you can attach a standard pool hose which is wider than garden hoses which makes draining faster. Printed in PETG using standard settings. The inner part can either be glued or just pushed in place. I prefer to not use it at all…
Simple yet effective and secure tailboom antenna mount for T-antennas like the TBS Immortal T. Printed in PETG which is more flexible and durable than PLA. If you like my designs please consider donating a coffee or any amount really, I…
Printed the head with support and the insert cup in spiral vase mode. If you like my designs please consider donating a coffee or any amount really, I appreciate the gesture. https://www.paypal.com/donate/?hosted_button_id=QEF27KJ6FXGM6
Three variants of PDB mounts. Two for tapping M3 yourself and one for M3 nuts. Attach to plane using hot glue or double sided tape. If you like my designs please consider donating a coffee or any amount really, I appreciate the gesture.…
I made this holder since the stock holder couldn't handle the vibrations. :) The clamp has a diameter of 24mm and is held together by four M4 screws and nyloc nuts. If you like my designs please consider donating a coffee or any amount…
A pan and tilt for 15x15 camera. Tilt servo is 4.3g and pan servo can either be 4.3g or 9g. Servo arms to be glued into the arms. Camera can be mounted on either side of the servo, use MIR files for other side. Can be printed without…
IMPORTANT, THIS DESIGN IS NOT ALLOWED TO SELL! After designing my compact tripod I realized I also want to be able to mount phones for photography and designed this phone holder. It has a threaded hole for 1/4 UNC tripod screw. Print the…
I needed some slot nuts for 3030 aluminium frame so I designed some. Also I needed some of them to retain their vertical position for easier installation so I added a small spring. Both versions (with or without spring) are included for…
I needed some turn slot nuts for 2020 aluminium frame so I designed some fitting m3 nuts. It's a tight fit. Push the part onto the nut and it should fit. If you like my designs please consider donating a coffee or any amount really, I…
IMPORTANT, THIS DESIGN IS NOT ALLOWED TO SELL! The case supplied with the Raynox 250 magnification macro lens is ridiculously large so I designed this simple yet effective rear cover and front lens cap. Print without support. After print,…
I designed this mount (copied by many) for the Oculus controllers as well as a generic and sturdy headset mount. The mount is aesthetic and sturdy. I designed it with either no hole, one hole or two holes. Touch 1 is for Rift CV1, Touch 2…
Flip switch guards for 6mm threads. Can be scaled up to fit 12mm switches. Three main variants, type 1 is a cylinder, type 2 a circle and type 3 an open box. It works very well for the arming switch which you want to protect against…
If you like my designs please consider donating a coffee or any amount really, I really appreciate the gesture. https://www.paypal.com/donate/?hosted_button_id=QEF27KJ6FXGM6
Anti vibration feets for CNC or 3d printers, two variants. Printed in TPU. If you like my designs please consider donating a coffee or any amount really, I appreciate the gesture.…
Three variants for T-antenna mounts for the Heewing T2. One for the boom and for glueing to the side behind the wing. I made one variant to sit higher up so it can fit inside the Heewing T2 carrying case. The two foam mounts can probably…
Very easy and quick print for eSun refill spools. No overly complicated locking system, just push and attach each side. If you like my designs please consider donating a coffee or any amount really, I appreciate the gesture.…
Didn't really like the existing modules so I designed my own with different lids depending on what I will use it for. The lid with 18mm hole will be used with TSLRS since I use a 16mm circular locking connector. If you like my designs…
Made two mount plates, one flat and one with slots for landing skids/wheels. The landing legs have 2.5mm hole which I tap to M3 thread and use a M3x8mm screw. A rubber band is used to angle the skids up ~15 degrees during flight. The rear…
Tried these modules which actually work really well. I have them in my FPV case/backback to charge phone/tablet etc from DC-connector or XT60 8-30V. Allows super fast charge on the field. Not friction fit, I dab a few drops of CA for a…
STL for bouncer here: https://shorturl.at/1nIuO Slotnuts M5 here: https://shorturl.at/RItZT Parts needed: 10x slot nuts M5 14x M5x8 Countersunk Screw 4x M5 Nuts 2x Slotted Tripod Screw UNC 1/4 If you like my designs please consider…
NOTICE: It is not allowed to print and sell this design on eBay (or anywhere else). It does not matter if you change the design. Please read licence information. I needed a better LED holder so I made my own. To clarify this design works…
Tired of spilling cat sand on the floor when cleaning the cat box I though of an idea. What if I didn't need to insert the scoop into a plastic bag, what if the plastic bag was part of the scoop. I designed this which is now in it's…
Mounts for Walksnail VTX's specifically the Avatar HD v2. The camera mount fits both the standard and Pro and possibly the Moonlight camera. I have three camera mounts, only difference is the servo head alignment, hopefully one of them…
Simple to print and use and mount coffee filter holders. Fits size 4 (1/4 or 1x4). Can easily be scaled to fit other sizes as the angle usually is the same. If you like my designs please consider donating a coffee or any amount really, I…
Stake and joiners, the curved joiner fit the approximate curvature of a ~180cm pool noodle. But the curve is of course adjustable so I think from 150-200cm should be fine. I print with 3 wall parameters and 10% infill. The “handle”…
Bought a simple Geekcreit test meter and made a case for it. I placed the 9V battery inside with a flip switch to turn on/off.…
Replacement frotnt hatch with cooling and and secure mount of an antenna. Fits the hatches on Heewing T1 and T2. If you like my designs please consider donating a coffee or any amount really, I appreciate the gesture.…
Turnable tail wheel for Heewing T2. The original landinggear is good but I missed a turnable tail wheel as well as a better way to quickly attach and detach the landinggear. Also mount knobs for quick assembly of landing gear without…
A remix of lab27's design. I liked it but needed LEDs and integrated it in the design. :) The power cables are 30AWG, any thicker and cable routing will probably be difficult. There's also room for a switch. There's two variants, one with…
A USB condom is to safely be able to charge your devices from unknown power sources, for example someones computer or any unknown outlet. The reason why it's needed is that with the I/O connections it is possible to infect and read/write…
This handy tool makes it easy to measure the correct amount of spagetti for 1,2 or 4 servings. If you like my designs please consider donating a coffee or any amount really, I appreciate the gesture.…
This is a secure mount for the SpeedyBee F405 Wing Mini FC. It locks it in place in all directions without gaps. Use an M3 tap to make threads. The Upper part can be split into parts and printed in different colors with an arrow symbol.…
A miniature timeglass. Instead of the boring 2D marker I wanted a 3D hourglass and was not really happy with the designs already on thingiverse. This design should be easy to assemble straight out of the printer. To make the it functional…
A bigger and better battery mount (Heewing T2) with holes compatible for mounting the accessory mount (for example landing gear). I apply some hot glue to increase friction for a better secure battery mount. If you like my designs please…
I didn't really need it but figured it would be fun so I designed a drop release for the T2. The proof of concept with bent wire and 9g servo successfully released 3kg weight without much problem which equals a weight of 6kg which is more…
This is a collection of zip tie holders for M3 countersunk screws. I needed some zip tie holders to secure and strain relief some cables on my printer so I modeled one. Then I realized I could easily modify it so one holder can be used…
Traveling with a laptop and playing simulators is not a good mix and while I missed my HOTAS setup back home I thought of building a mini HOTAS I could easily take with me and not take up too much room yet still be easy to use. Connects…
I found this cat by Filopat, scaled it down and added a platform beneath it. It is for the board game Mice & Mystics where Brody the cat is just a flat marker. As always, if you find it useful a tiny donation to me and/or FiloPat goes a…
Remixed JUSS10's landing skis to fit a Heewing T2. Two sizes of skis, one having 180% larger surface area. Added two variants of tail skids, one locked in place on the landing gear rear wire. Changed the tube mount with a quick use M3…
Made a mount for the Vifly Strobe for the tailboom. Print in pale half-translucent white PLA. I find that neutral colored PLA often works very well. If you like my designs please consider donating a coffee or any amount really, I…
A small plastic case with slot for 15x15mm heatsink for the uncased Avatar 1S VTx. It's basically the same VTx as in Nano/Mini VTx but uncased which is why I made a case for it. Thermal pad/paste needed for good thermal connection with…
If you like my designs please consider donating a coffee or any amount really, I appreciate the gesture. https://www.paypal.com/donate/?hosted_button_id=QEF27KJ6FXGM6
A replacement for the original front hatch. Doesn't require any tools except some CA-glue to hold the fin and small filament. Print in PETG, low infill ok but use >5 perimeters for good and longer lasting snap lock. If you like my designs…
Needed a wall mount and designed one that clips onto the tail boom. Printed in two parts which can be glued together. Two parts are needed so it is as strong as possible with minimal infill and parameters. Printed in 0.25 and 15% infill…
Designed this mount to easily snap mount the walksnail vtx into the nose of the Heewing T2. Printed in PLA which works OK as long as a fan is installed in the nose of the T2. For other fan-less builds I recommend using PETG. The parts is…
Solder Tip Holder for solder tips with an outside diameter of <7.5mm. This fits my Hakko 900-series tips perfectly. If you like my designs please consider donating a coffee or any amount really, I appreciate the gesture.…
Made a servo tester with a 0-91in OLED and here's the 3d printed boxes for both variants. For 4USD+shipping I'll ship a PCB and code. Depending on what I have components wise I might ship buttons, connectors etc also for a bit extra.…
Plugs for 1.5in (38mm) pool hose tube. One plug has holes so water can go through but close for rodents etc. Tapered end ensures good fit even with significant tube diameter variations. Printed in 0.4mm layer in ABS to withstand outdoor…
A protective cover for the Walksnail repeater. Easy to slide on and off. I've made them in TPU and PETG, both works. If you like my designs please consider donating a coffee or any amount really, I appreciate the gesture.…
I made this tray for installing and accessing receiver and flight controller. The tray is fastened with velcro. It sits securely yet can easily be removed. Or just use the bottom plate to mount equipment deep inside yet easy to access by…
These parts are for converting the Sky Shadow 800 to a dual-tractor tailsitter. The motor mounts fit any motor with CC 16-19mm. The wingtip fins replace the original fins. The fins also acts as landing gear. I designed a conforming tail…
This is a collection of low profile zip tie holders for M3 countersunk screws. I needed some zip tie holders to secure and strain relief some cables on my printer so I modeled one. Then I realized I could easily modify it so one holder…
A ground loop broke the wing clip so I made a replacement. Printed solid by having 4 wall parameters. If you like my designs please consider donating a coffee or any amount really, I appreciate the gesture.…
GPS mount for the Flyfish mini M10 GPS. Printed in TPU and 0.25mm layer height. Support is not needed but the bridge can look better if you do. If you like my designs please consider donating a coffee or any amount really, I appreciate…
Simple pan mount for the DJI O3 cameras. Print in durable material and use 3 layers for extra strength. Two variants, one with servo tooth mount and the other for servo arm. Basically same mount as I use on the Phoenix S 1600 but I added…
Needed a new 110mm pipe cap, my son chose the theme and helped with the paint job. This is an easy print and fun to do yourself or with your kids. :) The figure is attached using two M5 knurl nuts but wood screws or similiar could be used…
A spinner mount for original foam spinner as well as a 3mm M8-washer which I needed because my motor was too short. If you like my designs please consider donating a coffee or any amount really, I appreciate the gesture.…
I made this design to be printable by a standard FDM/FFF printer but results will of course be better using a SLA printer. The bug is connected to the platform using a 1mm wire ~30mm long. If you like my designs please consider donating a…
This is a low-les model to be used as Jakobes companion Notch in the Mice & Mystics games. If you like my designs please consider donating a coffee or any amount really, I appreciate the gesture.…
Instead of the cardboard marker I printed an owl which is mounted onto a base with a 2mm carbon fiber rod. The owl is divided into three parts to make printing easier without loss of detail. If you would like to download the original owl…
A wing motor pod that can be easily edited to fit any wing. Included is also files that fit the Sky Shadow 800. It was designed to transform a flying wing to a tailsitter. The uncut pod can be edited to fit any wing. I can help design a…
I’m using the LED light for negative scanning, but the individual LEDs were too distinct and appeared in the images. To solve this, I designed a diffuser that blends the separate LEDs into a single, more uniform light surface. A frosted…
IMPORTANT, THIS DESIGN IS NOT ALLOWED TO SELL! Once I began flying flight simulators in VR I quickly realised that hitting the correct key on the keyboard is a challange when you can't actually see the keyboard. My HOTAS setup just…
A simple way to re-route rain water into a bucket or other container. Printed in PETG and needs support. If you like my designs please consider donating a coffee or any amount really, I appreciate the gesture.…
I had some old Mavic Pro filters lying around that I wasn’t using, and with the new light-sensitive Avatar Pro and Moonlight cameras, I found I could repurpose them instead of using the official Walksnail filters (which I forgot to order…
Needed a longer vertical mount for my GemX RX antenna. Printed in TPU 98A. If you like my designs please consider donating a coffee or any amount really, I appreciate the gesture.…
This is a complementary cover for the Matek MLRS Tx to be used with a TBS Lite/Nano rear part. Could probably easily be fitted to other Nano/Lite intefaces but I had a few spare ones for TBS crossfire so that's what I used. :) Printed…
I like this screen but the battery always sucked and spares cost a lot. These models fix that problem. :) One holds a 3S 11.1V Li-Ion like the ZOP Power 11.1V 3000mAh 3S. The other holds 3 separate 18650 cells. DC5521 plug needs to be…
Needed replacement fuselage mount strips and battery plate after a crash. If you like my designs please consider donating a coffee or any amount really, I appreciate the gesture. https://www.paypal.com/donate/?hosted_button_id=QEF27KJ6FXGM6
Made these to make voltage level check easier and faster. They weight ~0.6g so maybe not for tiny whoop batteries but for larger models I'll likely put these on most batteries as they are really cheap. I designed an inline button so they…
The kids got thirsty jumping on the trampoline and their water bottles placed on the rim constantly fell down or rolled away. So I designed this mug holder which is easily attached using one or two zip-ties on the trampoline safety net…
I use 1.75mm filament which is perfect for many recessed bind buttons. The problem is that usually misplace them if they're in my bag for the googles etc. Mainly because of this I made a knob to hold onto which “might” result in them…
I needed some turn slot nuts for 3030 aluminium frame so I designed some. Versions are included for M3 nuts and M3 knurl nuts. In the picture I use the slot nut together with my zip tie holder:…
A simple yet effective hanger. Designed it for my kids headphones and the first version worked straight from the printer. :) If you like my designs please consider donating a coffee or any amount really, I appreciate the gesture.…
Made a mount for the repeater to be strapped onto a drone. Two variants using one or two straps. Use magic foam or similar for good fit between mount and drone. Printed in PETG. Mount together with CA-glue. Repeater is mounted using a…
The supplied base was too small so I printed a larger one. NOTE: This is just the base not the model. The model is available from boxes of fury: https://boxesoffury.com/en/product/mice-shalop/ If you like my designs please consider…
Made this nose to house camera and vtx. The plan is to make several variants for walksnail and DJI but right now only for analog. There is room for a small 25x25mm fan but for now it is only air cooled with directed air channels. If you…
I designed this vtx cooler after having experienced vtx getting too hot while waiting for GPS-lock and doing pre-flight checks. It uses two 14x14 heatsinks usually sold for Raspberry Pi. Just push in place should be sufficient. It also…
Made this for a M2x25 as knurled heads in that dimension are close to impossible to find. They are used for the fin on the Heewing T1 Ranger. Print in 0.1 or 0.15. Use a 0.5mm metal wire to lock slotted head in place. If you like my…
Simple voltage checker activated by a button. Glue with CA. https://www.aliexpress.com/item/1005012212498426.html If you like my designs please consider donating a coffee or any amount really, I appreciate the gesture.…
The sharp edges annoyed me so I made a TPU frame. Printed in 98A FLEX. It's for the both sizes I know of the larger 5dB and the smaller 6.7dB. If you like my designs please consider donating a coffee or any amount really, I appreciate the…
