Counting matching models…
A set of lathe spiders for lathe chucks with jaws up to 20mm wide. The chuck I made these for is a 160mm. I created a parametric model in Fusion so any depth or jaw width can be added if requested. Alternatively changes in depth can be…
An in-line cleat which may be fitted either in the mid-span or at the end of a rope. Suitable for 6-11mm diameter ropes (the photos show an offcut of tatty old 10mm rope - my good ropes are in the boat!). This is my Version 2. It differs…
My wife wanted a stand for filling freezer bags with home-made soups, curries and the like. It had to be robust, stable and be able to be safely used hands-free. It also needed to be able to accommodate a range of bag sizes and to fold…
Bi-square deck filler key. Typically used in marine applications on both diesel and water tank filler caps. Much easier and less cumbersome than using a winch handle. Suits normal 18mm bi-square filler sockets. I printed this design in…
Prior to owning a printer I always used a filler funnel to bleed radiators. The old funnel broke so I printed a new one in a bit of a hurry ( https://www.printables.com/model/1296317-radiator-bleed-funnel ) in order to get a job done.…
A replacement crossbow for the now classic game Crossbows & Catapults (apparently also known as Battlegrounds). This is a close replica of the original. A couple of months ago I designed and posted here, a replacement rod/bolt for the…
This is a reverse-engineered copy of the leg catch on my Black & Decker Workmate; it was a tricky one to draw! My Workmate has no identity markings but I bought it new in 1981/1982, and from recent research, I believe it to be a WM625…
A small funnel to facilitate bleeding radiators. I have spent years doing this job with a round funnel that didn't fit between the radiator panel and the wall or between double panels. One day it fell to bits - but now I have a printer so…
This ram end cap replaces Raymarine or Autohelm G004. This part is common to ST1000, ST2000, ST4000 and EV100 Tiller pilots. The OEM part is basically cylindrical with a small index line to assist fitting it to the tiller pin. It is thus…
I designed this wall/bulkhead mounted shelf or tray to hold my reading glasses in my boat but it could equally be used at home or workshop. I fitted it below deck but there is no reason it couldn't be above deck as I have included a drain…
A set of lathe spiders for 4-Jaw lathe chucks with jaws up to 26mm (nom. 1") wide. The chuck I made these for is a 200mm. (I have also posted a 3-Jaw version) I created a parametric model in Fusion so any depth or jaw width can be added…
A pouring spout to suit 20L drums or similar. Thread major diameter 60mm. Thread pitch 5mm. Drum aperture diameter nominally 50mm. I printed the threaded ring with a plain diameter and applied Prusa Slicer's “fuzzy skin” to provide some…
This is an improved version of my earlier design - https://www.printables.com/model/1266743-outdoor-table-umbrella-bush-assembly The earlier design has a parallel bore which is fine if that's what you want, however my wife found it…
Bi-square deck filler key with embedded magnets for mounting. If you don't require the magnetic version I have also uploaded a non-magnet version https://www.printables.com/model/1247417-marine-deck-filler-key-without-magnet-mount These…
I designed this little guard/support because I felt that the USB and/or xLCD was very vulnerable to damage if the USB were bumped. I didn't want any of the designs that surround the xLCD as mine sits within the bench top and thus…
This pair of cleat boots were designed for 200mm cleats but could be scaled or remixed to suit other sizes. All that is required is the addition of some 6mm diameter bungee. Thread it through the holes and knot the ends. The concept is…
A retaining clip to suit many of the common swim or boarding ladders found on sailing and motor boats. Suits 1" ladder tubes. It is not entirely dissimilar to ones available commercially! I printed this one in PETG which seems fine for…
This started out as a Fusion design exercise on a wet and windy day. As drawn it is approx 180mm diameter and 70mm tall. I wasn't sure if it would print well so tried a 50% version (white one in photo) but that worked perfectly in PLA…
A simple and functional desk tidy or desk organiser and pen holder. Base 80mm x 160mm. Max Ht 105mm. I printed it in PLA with only one perimeter on a 0.4mm nozzle. Along with a 2mm wall thickness this was perfectly strong enough without…
A phone stand incorporating the charge cable. The cable is captive in the stand and connects when the phone is mounted. My phone is in a fairly robust case with cord lugs either side of its base so the stand was designed for that. It does…
I made this centre bush assembly for our outdoor table. It fits in the centre of the lazy susan. The OD of the bush where it fits into the table hole is 58mm and the umbrella hole diameter is 40mm. It is secured with the M56 x 2.00 mm…
A simple design to keep your trousers out of the chain. I made four sizes until I got the best fit for me. Sadly, I have sparrow legs so the “80” was the best fit for me. The “75” was a little snug even for me but I have included it…
A wall mounted, angled phone rack for an iphone 13 fitted within a protective case. I made this to mount my phone above the chart table on a boat. It needed to be secure for obvious reasons! The phone slot 78mm wide x 13mm deep. I…
Herb Stripper 125mm x 80mm I'm sure no cook would want to know this but the hole diameters are: 2.5 3.0 3.5 4.0 4.5 / 5.0 6.0 7.0 8.0 10.0
I designed this clip to secure a pair of nitrile rubber oil hoses (6mm ID, 10.6 mm OD) to a bulkhead, but also required them to be readily removable from an awkward location without a screwdriver. It could serve a similar function for any…
I designed this spare spool to accept a steel axle rather than to include the axle in the print. This is to enable me to wind thread onto the bobbin using a drill. A plastic axle wouldn't survive for long. For the axle use 3mm or 1/8"…
This foot is for the low height of my dual height workmate. My workmate has no identity markings but I bought it new in 1981/1982, and from recent research, I believe it to be a WM625 E07Z. In about 1996 I had to replace the low-height…
These levers are for the removal of rubber raw water cooling pump impellers. They are primarily for marine engine water pumps but may have other applications. The aim is to provide a pair of levers which will not damage either the…
The Dzus fasteners for the safety guards around the cutter deck on my Countax lawn tractor have begun to break. Ariens, the U.S. owners of the, once UK, Countax and Westfield brands ceased production of them in 2023. These parts are still…
This box or tray is designed to hold three scalpels plus spare blades. In the photo my box contains three Swann Morton scalpels. Overall dimensions are 170 x 50 x 20 mm.
A 68mm downpipe clip. This is a common UK size for fastening the downpipe to the house wall. It may be used as a replacement for the similar Marley - now Osma, product. Yes you can easily buy these but for me it would require a long car…
A relative brought me the broken handle bracket of his Thetford C220 cassette toilet tank (ref photos). This part is not available separately from Thetford who supply it only with a complete tank. I had only a few broken bits to work with…
A grease nozzle for tubes with 11.5 - 12.00 mm x 1.75 mm threads. This is a plain tapered nozzle with an OD of 4.60mm at the tip. I also made an M6 nozzle to fit the same tubes. That design is available on these pages too. Printed…
A new bolt for the crossbow of the now classic game Crossbows & Catapults (apparently also known as Battlegrounds). Also complete assembly see below. This is my grandson's favourite game of the moment but unfortunately one of the crossbow…
Handwheel nut to replace the broken one on a Hayter mower. Perhaps of use to somebody out there. This wheel/nut is used to lock the folding mower handle. An original (the un-broken one of a pair, shown along with the printed replacement)…
A drill sharpening gauge to ensure correct cutting edge angle and that edge lengths are equal. Equal edge length is vitally important for drilling true and to true size. The gauge is designed to accept a 150mm (6") steel rule. My rule…
The Battery tray for the Land Rover / Range Rover key can be easily broken - specifically the lugs can break off (as on the left-hand one in the photos). The tray component is not available as a spare part so this print could save you a…
This small vase is 160mm tall and 98mm max diameter as-drawn but is obviously scale-able. It is my first departure from my usual engineering/functional components - the result of a challenge to draw a vase similar in concept to a ceramic…
This part will fit ST1000, ST2000, ST4000 and EV100 Tiller pilots The OEM ram end cap G004 is basically cylindrical with a small index line to assist fitting it to the tiller pin. With the standard part, it is necessary to search…
A variation on my Fluted Twist Bowl with a double twist - untwist. I preferred this design but a higher authority preferred my other one so I admit that I have yet to print this one. I would be most interested to see the result if you do…
Replacement slider inserts for the spinnaker track of a Selden or Kemp mast. The OEM part number of the insert is 530-705. For reference the slider is 511-505 and fits a 25mm track. Despite being printed in basic PLA, these are already in…
This is a cleaning tool for the E61 58mm grouphead. I designed it for our Izzo Alex Duetto Dual Boiler Coffee machine but may fit other 58mm E61s too. Our machine is in everyday use but only domestically so needs to be cleaned after every…
I designed this bush to prevent the 4mm guard rail wire from wearing the aluminium stanchions on a boat. They could however have other applications. I could alter dimensions if there was any interest. The are designed for 4.00 wire in a…
Yoghurt or Cream Pot Lids designed for printing in flex material. The 95mm and 75mm diameters refer to the outer diameter of the pot lip. The lids are designed to be a snug "airtight" fit on the pot. Because of the thin sections, they…
A grease nozzle to inject grease into M6x1.0 female threaded greasing points. Fit tubes with 11.50 to 12.00 mm x 1.75mm pitch threads. I made this nozzle to inject silicone grease into a Vetus marine stern gland but it could have other…
A replacement castle brick for the now classic game Crossbows & Catapults (apparently also known as Battlegrounds). This is a close replica of the original. My grandchildren love this game but they noticed that our set was missing two of…
A small fruit bowl to go with the Fluted Twist Vase I designed. The “boss” rather liked the vase so set me another challenge. This semi artistic stuff is still out of my comfort zone! It has the following dimensions as-drawn: base…
I designed these catches to replace the ones originally fitted to many Moody yachts. The catches are fitted to the sliding "glass" doors of the galley and heads cabinets. No supplier of the OEM catches has been found so I created this…
I made this handle to fit to the PRV (pressure release valve) knob on our hot water cylinder. Our Heatrae Sadia Megaflo cylinder requires the air gap to be recharged every four months or so. Without this handle your fingers go cramp while…
The hinge in my workshop toilet came adrift this morning. I was in the middle of designing a replacement before finding, to my surprise, that these were still available as spare parts (see below). Our lid is a Celmac Saxon but from the…
Perhaps a bit niche this one! Nevertheless, if you own a Rothenberger SuperFire blowtorch (a popular, quality torch) and use it with a remote gas cylinder, as I often do, then this could be very useful. When used with an integral gas…
I designed the lower bracket for our EV charger. The lower one features a drain slot to prevent the risk of water pooling against the wall. Having produced this lower bracket I thought it would be equally suitable as a hanging bracket for…
These are all currently available results.
