Counting matching models…
First I stumbled across https://www.thingiverse.com/thing:2857697 , which offered drawers in a couple of sizes and a few different frame configurations to hold them, all of which are intended to print in vase mode for speed and economy. I…
Not all SFX power supplies mount to the case on the 125x63mm (?) face. Some mount on the 100x63mm face instead. This is a modification of one of the existing ATX-to-SFX adapters to work with these "rotated" power supplies. Print Settings…
A friend of mine was missing some of the inserts for her ceramic Christmas tree, so I went looking here and found something that was close to what I wanted. A few tweaks produced this. Print in vase mode with 2 bottom layers, 0.2 mm layer…
There are lots of SMD storage solutions out there that promise customizability (including this one ), but every one I've run across requires expensive (or at best, free-as-in-beer) proprietary software that would also amount to yet…
This tolerance test is adjustable not only for tolerance, but for diameter and height. Trying to find slicer parameters to make a given tolerance requirement? These print in less than a half-hour at 0.2 mm layer height and default…
I don't ride my bike enough at night to justify buying a headlight for it, but I have a nighttime ride coming up and already had a nice bright light I run with. As set up, this'll mount on a 7/8" handlebar and will hold a Lux-Pro LP600C…
The original frame mount design didn't line up right with my frame (there have been changes to the A8's frame design throughout its production run), so I designed a new one by starting with a chain link and building it up from there. The…
I have a dehydrator (a Nesco FD-61) that takes 13.5" trays...far too large for most 3D printers. Slic3r will cut models on the Z-axis, but after adjusting the original dryer spacer for my dehydrator, I didn't see a way to cut it into…
The latest version of the Wombat doesn't fit the original case. There's an electrolytic capacitor that stands too tall, and the reset/power button has been moved. This fixes it. This also closes up the area over the jumpers, as I don't…
I used OpenSCAD to split the provided STL in https://www.thingiverse.com/thing:340687 apart into three pieces, then recombined the case and keyboard into one piece. The base (for all but the oldest Raspberry Pi boards) is also included.…
Remixed the original to a 3-color print. Print Settings Printer Brand: Anet Printer: A8 Rafts: No Supports: No Resolution: 0.2 mm Infill: 20% Filament: various PLA various Notes: Start with white filament. Change to yellow (or the color…
This is a simple frame to hold a CPAP or BiPAP machine on top of your bed's headboard to maximize the usefulness of whatever hose length you're using. Since machines vary widely, you can tweak and re-render the OpenSCAD file for the…
The X-axis motor mount on my printer doesn't provide for a tight fit with the included hardware. One of these spacers will tighten it up. It was an almost trivial design to knock together in OpenSCAD. I've rendered it in 1 mm increments…
I bought an inexpensive macro keypad recently that I'm now customizing for KJ use. I found a flattop keycap here that's an ideal base for customization, and now I think I have the printing process figured out. The .scad file generates a…
I have a PCI SCSI card I need to install in one of my computers to read out the contents of a hard drive previously used with an Apple IIGS, but the motherboard I installed earlier this year has no PCI slots. I bought this…
This remix holds an 8x11x30mm copper bushing (such as at https://www.aliexpress.com/item/3d-printer-bushing-1-pcs-8mm-11-mm-30-mm-8-mm-copper-bush-graphite-sleeve/32476367665.html ) in place of an LM8UU linear bearing. Print Settings…
This mashup of two existing designs speeds up filament changes. No fasteners need to be done or undone; just slide the spool onto or off of the roller. Bearings minimize friction in the roller. Print Settings Printer Brand: Anet Printer:…
Of the available Floppy Emu cases, this one looks the most like something Apple might've produced. That said, it needed some fixing to work with the new rev. C Floppy Emu with its MicroSD slot and OLED readout. The seemingly large hole in…
A simple tool to press bearings out of (and back into) mounts, housings, etc. I needed to replace one of the X-carriage mounts on my A8 to accommodate a replacement idler pulley that was wider than the original; this made quick work out…
Update: (29 Mar 18) I tried mounting the sensor shown in the photos this morning. It was a tight fit on the frame, but it worked. What didn't work so well was pulling filament through it when the extruder was at one end of the carriage or…
The button fell off a pair of pants, and by the time I got around to reattaching it, the button had disappeared. This is a simple replacement that prints quickly enough that you could just make them as you need them. Print parameters…
I had an ATX power supply running my A8 until recently...traced bed-heating problems to an overloaded ATX12V output that had started going bad. I replaced it with a 750W HP server power supply with a PCIe breakout board that had…
The rubber case of my Solo 1 developed a split, so I looked for a replacement. I found one, but it was for the USB-C version, so I tweaked it for the USB-A version I had. I also added a loop so it could be attached to a keyring. The body…
I moved the stops on the ends of the X- and Y-axes further out so that you take all measurements with the depth stick (?) on your calipers. This removes extrusion thickness as a source of error for X and Y. I also extended the Z-axis out…
I had some Space Bag knockoffs to load up with clothes recently, but the end of the hose on my vacuum cleaner has some notches in it that make getting a good seal a bit of a pain. This simple adapter blocks those notches. This might also…
While playing around with OpenSCAD one day, rotating shapes around an axis, I stumbled upon a configuration that somewhat resembles the decorations on all of the “barley-twist” furniture my parents brought back from England. It basically…
This is a document dump of everything that went into converting my (already heavily-modified) Anet A8 to (an improved version of) an AM8. I retained the A8 upgrades that made sense to keep, while taking the opportunity to improve on the…
I built my Hypercube 300 with a quarter-inch slab of aluminum tooling plate for a bed, but without provision for leveling. I figured I'd compensate for it with unified bed leveling, but over time, I've ended up with a 1.9 mm difference…
I started out wanting to use the right-side chain at https://www.thingiverse.com/thing:2745156 , but there were several points of interference between it and my AM8 build (might've been a function of the right-angle brackets included with…
I added 6.5 mm to the middle of the original design so it'd clear the hotend with the mount that I'm using ( https://www.thingiverse.com/thing:2193695 ). Print Settings Printer Brand: Anet Printer: A8 Rafts: No Supports: No Resolution:…
I have a Precision Piezo Orion sensor on the way for my Hypercube 300 build. The Piezo Lite Carriage is designed for the older Piezo20 sensor. This remixes the Piezo Lite Carriage for compatibility with the Orion sensor. I've also…
The original motherboard for my A8 has been getting flaky lately, so I replaced it. I needed something to hold it in place and the existing options didn't quite do what I wanted, so I knocked this together in OpenSCAD. It holds an Arduino…
This is a belt-tension tuning “cube” (only a third as tall as it is wide, to save filament) for use with the directions I found at https://reprap.org/forum/read.php?397,530210. It's pre-rotated 45° for proper orientation and has labels on…
This is a remix of the capacitive proximity sensor mount into a BLTouch mount. It should hold the sensor (not including the pin) 8.3 mm above the print bed when the nozzle is on the bed. In your Marlin config, start with…
The stock bearing blocks aren't tapped on the side to which the optical endstop targets in https://www.thingiverse.com/thing:2873216/files are to be attached, and I kinda wanted to replace the bearings with bushings anyway to reduce…
This is a fairly straightforward remix of my Raspberry Pi Zero 2020 Bracket that only needed a few numbers to be tweaked here and there to adjust it for the Compute Module 4. I combined one of those (with onboard WiFi and eMMC) with a…
Just a simple mounting plate for an Arduino Due and RAMPS-FD that I plan on tucking behind the control panel (with graphical LCD and Raspberry Pi) in my Hypercube 300 build. It should also work with an Arduino Mega and RAMPS 1.x or most…
This is a combination of parts that adds up to a fairly compact geared extruder, with mounting ears to attach to 2020 extrusions. See HC300-NOTES.md for assembly instructions. exploded_view.stl shows how everything goes together. I…
I'm looking at putting ReprapFirmware on my Hypercube 300. The necessary adapter to connect its Raspberry Pi Zero 2 W to its SKR Pro 1.2 is out-of-stock on Tindie. This is a smaller adapter that does the same thing, only it plugs into the…
These mounts hold a dial probe (specifically, the Clockwise Tools DIGR-0105 digital indicator) on your AM8 so you can verify that a 10-mm move on X, Y, or Z is actually 10 mm, and correct your step settings if it isn't. One mount goes on…
These are simple rings that clamp onto the shafts of the CoreXY mechanism to set travel limits when using the StallGuard feature of TMC2130 drivers instead of limit switches or other endstops. Print two of each to make a set suitable for…
The BLTouch in my Hypercube 300 is acting up. :-( I was able to get it running enough to print this by homing the printer on X and Y, centering the carriage, rolling the bed up until a piece of paper between the bed and nozzle started to…
All I did was split the original STL (with both pieces) into two pieces so that each piece can be properly aligned on the print bed (in the original, the bottom could only be printed vertically, and supports would've been needed for the…
I built a RAMPS-FD for my Hypercube 300 (printer still under construction). To design a mounting bracket for it and the Arduino Due to be stacked underneath, a pair of models I can bring into OpenSCAD would be useful. I'm pretty sure…
I needed somewhere to mount the extruder after a bowden conversion, but one corner has the spoolholder ( https://www.thingiverse.com/thing:2141857 ), the other has some switches ( https://www.thingiverse.com/thing:2843169 ), and most of…
These are all currently available results.
