Counting matching models…
Layerheight 0.2 The original is 50x50x100 mm and printed on a Mini. I have included two different lids. One with a trashbin-symbol and one without. I have also included a version which is 150% compared to the original. I have also printed…
Print approx. €0.32–€0.39 excl. taxPreliminary estimate for one variant
A general purpose hook for Harmony greenhouse (and others) for insertion into aluminum rail. Attach a string to the hook, attach the other end and let it help your plants You may use a plier to turn the hook into position.…
Print approx. €0.17–€0.21 excl. taxPreliminary estimate for one variant
I am working on Version 2, with the shorter neck first. Instead of using a threaded rod inside the neck, I'm now using a vertical aluminum strip (2 x 15mm) glued into the neck, which provides much better stiffness and prevents bending…
Print approx. €0.07–€0.08 excl. taxPreliminary estimate for one variant
The ultimate tool! The household-/toilet-paper! In the kitchen for the household paper or in the toilet for toilet paper rolls. You're choice. Perhaps for something completly different. Made it with Mystic Brown and Gold. Perhaps not the…
Print approx. €0.76–€0.93 excl. taxPreliminary estimate for one variant
Print with default settings layerheight 0.2 15% infill Inner height of the container is 25 mm and the diameter is 80 mm For a single/top container you should print a lid For the following container(s) you should print a connector All…
Print approx. €0.43–€0.52 excl. taxPreliminary estimate for one variant
One blank version and one with a snowflake. Use your slicers build-in functions to add your personal touch with it! The pre-sliced has 25% infill
Print approx. €1.84–€2.25 excl. taxPreliminary estimate for one variant
A common form for a simple weave. Normal settings 0.2 layer height 15% infill Three more sizes in 3MF and STL folder
Print approx. €0.81–€0.99 excl. taxPreliminary estimate for one variant
For kids to play with, watch out for the small parts as acute etc. Numbers as well...
Boxes with sliding lid Also see … https://www.printables.com/model/1427780-round-boxes-with-sliding-lid One .3MF-file only as example But many STL-files sorted by height (Z), Z30, Z35, Z40, Z45 and Z50 X and Y from 40 up to 100 in…
2025-jun-23 Added 3MF_Female and STL_Female folders 2025-jun-22 Well, the competition’s over, and as usual, I won absolutely nothing—BUT I’m carrying on like before, and here’s my latest: a hose coupling with a keyhole lock! This is…
I have made bottleopeners before but this is, maybe, final version. All are 40 x 90 x 6mm, for the coin-versions the diameter and height differs. Print with 100% infill for strength. When you open a bottle, hold your whole hand around the…
Print the plane separately, layer hight 0.2, 100% infill Print the stick with 20% infill or something… Included Fusion 360 file so that you can maybe improve the model. Aim high and don't let there be any persons or animals in front of…
I have printed with 15% infill 0.2 height Join them together gap to gap. August 2 - added a hook that can be attached to the end of a chain
Coziness with a tealight flower The tealights should preferably be LED There are three printing plates for the leaves, inner (7 pcs), middle (9 pcs) and outer (11 pcs). If you want, you can print in different colors! Then just press the…
.gcode files sliced with Prusa Slicer 2.6.1 The .3mf files for the cans are with Paint-on seams on the other side of the coin-hole, because otherwise the seams came in the side with the hole and it didn't look nice. So if you are using…
2024-june-24 On request, I have fixed a larger box (each part is 5 mm wider) and with Sunday-Saturday. See Model files (PillBoxW_English_S-S) below for 3MF and STL file A handy pillbox with a lid for every day monday-sunday NEW: added a…
The box inner size is 90 x 58 x 17 mm Suitable for Standard Playing Cards Or, as you can see in the images, suitable for anything else :-) Print-in-place, when the print is finished the box is ready to be used. You just have to loosen the…
Print the Yoyo with 80% infill and the yoyo will weigh about 60grams. The screw and the 3mm middle-nut should be printed with 100% infill for strength. The nut should obviously be in the middle of the screw. The screw could break if you…
Print-in-place box with snap lock. Two versions, one covered and one with hexagon pattern. Each with or without push-hole in the back. (A “credit card” in correct size is also attached) PLA Check video how to break loose the hinge…
A Fender Stratocaster Volume/Tone Knob :-) Layer height 0.1 mm for best look. For the MINI knob use paint-on support (see Image) Remove the support with a knife or similar. The MK3S knob needs no support. Printed with PETG. Prusa slicer…
A simple wall clock with a back part and a front part and plugs to get it together. However, you have to buy a quartz. (see photos) A mirror-front is included, mostly because I by mistake bought a counter-clockwise quartz. Print…
2024-sep-02: Added optional bridge = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = You may also be interested in the small credit-card-sized holder for mobile phone / cellphone…
A tripod stand holder for soldering, mobile phone magnifier when soldering, or digital distance meter, holder for laser et cetera or … maybe a way to document your work by attaching a mobile phone/camera and take pictures along the way……
There are five templates as you can see. Print the ones that you think you need. Nothing special about the print. See .3mf-files. Be careful when you take the print off the heatbed. There are tiny one-mm connecters here and there! Sliced…
Adapter kitchen faucet to Gardena coupling I use it myself to attach a hose when cooling my beer brewing. Don't forget a rubber gasket between the adapter and the faucet.
I've added a STL folder, Alternative, with slightly larger inner diameter (0.4 mm larger) for Mount and Connect. You may use them instead of the original tight fit. Look at this 30 sec video (Don't know how long the video will be there,…
I have printed both in PLA and PETG and both seem to work well according to my tuba-playing friend 100% infill See also...
This model is for bed size 210x210 Do not scale down the model because the hinges will not work! If you have a Prusa Mini then visit this page instead https://www.printables.com/model/237266-box-print-in-place The Model is Print-in-place.…
A simple weave for basic fabrics such as pot holders, trivets, patches for mending clothes, and similar items. (You can print it on a Mini, just arrange the weave-stick in a 45 degrees angle on the print bed) My very first weaving project…
Normally the Bose Soundlink Micro lies flat on the table or strapped to something. This stand is for either to stand vertically as in picture or mounted to a wall e.g. in your workshop! Straight forward to print. 0.20 with 15% infill.…
Small containers with screw-top lids for keychains in various sizes The STL folder names gives the inner diameter of the containers The file names …_Inner N d NN h The N d == the inner diameter (as given in the folder name) The NN h ==…
This stand is mainly intended for top-down shots , like photographing documents, sheet music, manuscripts or book pages. You can use smartphone apps to take pictures without touching the shutter button—some even allow voice-activated…
Label tag for IKEA Alex Drawer. Print instructions Just to be printed. 45 deg angle, no supports needed. Attaching both for MINI and for MK3S, PLA and PETG Had white PETG so PETG it was! Now Updated due to user input. Added .stl files for…
A 30ml measure that prints in 60 minuted on the mini and 64 minutes on the mk3s and thus can't participate in the competition :-)
The attached Prusa Slicer file (.3mf) has brim for the outer box. The inner box has no need for that. If the box is hard to glide smoothly just train it for a while :-) I used 100% infill. The green one in the image is PETG and the orange…
Don't forget a rubber gasket between the adapter and the faucet.
100% infill for strength. 0.2 layer height If anyone is interested in a coin fender opener please let me know and I will make one. Added coin version for 10 cent, and 1 SEK Added colorversions. Feel free https://paypal.me/gillislindstrom
2024-aug-20: Added an alternative TableTop, without opening for cap opener Adjusted the thread for the lid, just a minor but the lid fits better The parts are in print-position i.e. you don't have to arrange the stl files. Note that the…
Nothing special about the print - default settings Just choose the 2 or 3 millimeter version, depending on what pen you will be writing with The futhark is a 16 letter Viking alfabet Rune converter can be found here (choose Long Branch)…
Update: I've made a barrel with screw-lid The vertical black lines are drawn with an acrylic pen. Take some time to print but the outcome is worth waiting for. I've also included colorchange print so the bands of the barrel can be printed…
A coffee measure adopted to 3d print.
Printed with just 15% infill I have only added one 3MF-file, with “Complete individual objects” TubeContainer_Inner52d50h20xh Means 52d == inner diameter 52 mm 50h == inner height 20xh == extra height for the lid (00xh means no extra…
I've provided files for the MINI, MK3S and MK4 along with 3MF and STL files
One box is made for Micro SD only and can hold 30 items One box is made for SD and Micro SD and can hold 10 SD's and 10 Micro SD's There are also lids included, .3mf for colour-change. Press in the lower part to hear a tiny click. One…
Printed with PLA, PETG is allright as well. The clock module is 56x56x17mm. You can buy with different stick length. I have used 8-10mm but 5-7mm may be even better. The seconds hand seemes to be impossible to print so I have left it out.…
I made the letterbox for a school where students can put notes with requests for which books they want to read in class. The letterbox front is flat without any text/image. You can write your own text or add an image in the slicer…
This is my very first attempt at building a water sprinkler, so if you have any suggestions for improvements, I would be grateful. It has 3 x 12 holes (minus one) at angle 30, 45 and 60 An anchor can be attached to the bottom of the…
When I saw the Dice Tower contest I immediately thought of RundeTårn, built by king Christian 4 in 1642, in Copenhagen When Rundetårn was built, the region where I live in Sweden, Skåne, belonged to Denmark I will publish RundeTaarn in…
Print with PLA. I have printed with both PLA and PETG. Don't know why, but PETG prints more “stringy” in the threds and will not fit as smooth as PLA. PLA 15% infill Feel free https://paypal.me/gillislindstrom
Print with default settings. Printing on MK4 with input shaper takes about half the time compared to MK3S
The keyhole size is 8mm to 5 mm Attached the .3ms files for both Mk3s and Mini I have changed the setting Seam position to "aligned" And with a plant in it, hanging there on the wall, it is quite nice! Will attach a photo later… My pots…
A KeyTag with or without G-Clef I've also added a .3mf file for you to change letter from A to desired letter.
A practical sandpaper holder for your workshop. Multi Threaded screw, only needs a half turn to screw off Practical keyhole to hang to a screw or similar ONE TWO CUT Then attach the sandpaper, press down with the top and attach the screw!
A GreenHouse for seedlings. A box with room for nine pots. If you water a pot too much the water will spread to its neighbouring pots. Print instructions Printable for the Prusa Mini, maximum 180x180mm Printed with PETG. It can get quite…
Please see the assembly guide, in pdf-format, under Files/Other files See the multiplate .3MF file[s] Some parts are printed with 70% infill Some, not many, parts require supports (See .3MF-file) Hardware required 2 x Screw M4 x 12 mm…
For your crisps and popcorn for the important match! The slicer files are of 0% infill , feel free to alter the infill. The mini is without skirt due to size Paint with acrylic pens or spray brush.
I've just used default setting in the Prusa Slicer. Printed with PLA. Not tested with PETG . The ones in the photos are printed with Input Shape on MK4 and takes about 90 minutes to print Use the flaps if needed, see photos. if you want…
A creditcard sized phonestand 85,60 x 53,98 mm adjusted to 85,60 × 54 mm :-) thickness 3.2 mm (A normal credit card is approx. 0.8 mm, so four creditcards thick) Advantages Print-in-place, ready when printed Fits in your creditcard…
The letters in the STL_100 folder are 120 mm high and 20 mm in depth. The bottom and walls are 2 mm thick. I have also included an 80% version (the folder STL_80) which of course takes less time to print but is also easier for children to…
Just print it! The outer lid fits also at the bottom of the barrel. Sorry no photos. I gave the prints away before I took photos :-)
For your wooden or metallic drills 1-12 mm Feel free https://paypal.me/gillislindstrom
UPDATE! Print the screw horizontally, if you write it vertically it may break Put something that can rattle in the bottom part and screw the top part. Try different fillings, e.g. dried peas, beans etc If you don't have something that can…
This coffee measure is 15 ml. Of course you can use it for other purposies.
Scale the pot and saucer to wanted size. The big one is 100% (A) The second is ⅔ of 100 i.e. 66.67% (B) The third is ⅔ of (B) which is 44.45% or 4/9 (C) And the little one is ⅔ of (C) which gives 29.63% or 8/27 (D) But any scale is fine!…
A long box with room for pencils and pens and such. With a hexagon or voronoi pattern on the lid som you can see whats in there! Print-in-place … works best for PLA PETG can be used but it may be a little hard to loosen the hinges.…
Walls to Prusament cardboard box. Flexible with one to five gaps. Print instructions Combine as you like.
Print the complete kit, including the box, Hinge together with some filament. You can also just print the crank or the handle with a winding tool. Your choice as usual. NEW! Print-in-place Box
Just print it. 60 mm The holes are 10mm in diameter.
First of all. For this lamp to be useful you need to buy an IKEA Kapplake Art.No. 205.431.57 and then you are good to go! It is the only hardware you need , plus a USB-A power source of course. I needed a desk lamp. I've been working on…
A box with jalousie lid. Print instructions Added gcode for both MK3S and MINI The main body (jalusi_body) The other side of the body (jalusi_sida) The lid (jalusi) The two screws with a screwdriver :-) (jalusi_skruvmejsel)
The towbar cap with a smiley. You have to fill in the smiley, with a acrylic pen/paint, yourself. Now, a towbar should be 50mm in diameter, however when I tried on different cars there were some tiny differences. Therefore I have included…
This stool is made with broomsticks and an old IKEA bed rib bottom, but anything will do! The legs of the pallet are 450 mm high and the horizontal ones are about 270 mm The inner diameter of the plastic parts is 27.4 mm (The stick is 27…
Well, print with 15% infill Use 8 mm bolts to tighten
Added an alternative layout under STL … PhoneStandHeartB Added an alternative layout under STL … PhoneStandHeartC - just a minor change - the hearts above the flaps is higher up and at some angle A nice present/gift to someone that you…
Printed with PLA Wood so that you can sand (e.g. P400) it yourself according to your wishes. Oval thumb recess 24 x 18 x 1 mm Print with 100% infill and 0.1 layer-height I have used the following Wood PLA filaments…
Pencil stand. One with a "box" and one without. Print instructions Filament: PLA 0.20mm Infill: 15% Just precise for the MINI
The tall one (for dare-devils to print) has inner height 198 mm, diameter 50 mm 15% infill Due to two failed prints of the tall one I made a shorter version which can be attached to one another. The short bottom container is of height 75…
Three parts. Hanger Bell body Clapper Print orientation as in the files Check out the .3MF files for supports Screw the hanger into the bell and then screw the clapper to the hanger screw. It doesn't sound much but it works but should be…
I wanted yellow handles for our new Ikea kitchen doors Printed in PETG (due to colour) , 4 mm holes, standard screws (same Ikea is using) Distance between holes, 128mm (a standard distance) Update 2026-08-28 Another approach to the screw…
Print with default settings! Use for pens or something similar …or you may try to make it watertight!
I have printed on a MK4 with Input shape for speed If you are going to print on the MK3S then you have to disable skirt under print settings. Under 3MF_Mirror and STL_Mirror there are mirrored versions The CordHolder_EVType2_Holder…
Printing in two parts and gluing them together works perfectly! See the 3MF-files
I've printed this with 5% infill and it works just fine. Printtime is just under 12 hours Made this for my music sheets but works fine for your favorite cookbook as well Tilt 22.5 degrees The plektrums/picks and the bottle opener in the…
02 Feb 2026, All things in place ... only a bit of programming to do using Home Assistant and ESPHome 29 Jan 2026, So… now almost half of the staircase is fixed. The other half is a bit trickier, but it’ll work out… I’ll get back to you…
Got hold of an old Festo OF 900 cutter and needed a copy ring. The circle item must be glued to the main part. In the photo there is one black ring which is the original. The orange ones are only duplicates. And the green one is mounted…
19 nov 2024: added a model a bit raised… see Oddball_II The models must have supports. See the 3mf-files Used the automatic support in the slicer. Bit hard to get rid of the support but with some patience… Change text in the slicer
How to use Parts Note! Since the left and right sheet metal work are different for the CORE One, there is a right version and a left version. The right side is the one with the filament spool! Regardless of which side you choose, you can…
Poster Holder Can be made in many ways. Standard Width Height Comment A1 840 594 Landscape mode A1 594 840 Portrait mode A2 594 420 Landscape mode A2 420 594 Portrait mode A3 420 297 Landscape mode A3 297 420 Portrait mode A4 297 210…
I have previously been asked (by a vanlifer) to make a foldable cup holder, and now I have made one! This model is designed to be screwed onto a wall or mounted on an IKEA Skådis board. The .3MF files are divided so that every other ring…
Under 3MF and STL there are either BookendFloor for one BookendWall or EnvelopeFloor for two BookendWall's These are the base models Then you can print inserts to the walls
God Jul! Merry X-Mas! A common activity during X-mas-time is to crack and eat nuts, at least in Sweden but I suppose in many other places too. Relax and crack a nut! A hat, a screw and a foot I've made changes to the .3mf files, infill…
I remember X-mas crafts from when I was a child, including a woven paper heart that we hung on the X-mas tree. It was mostly candy that filled the heart, but that's up to you! Now I've made a similar version in plastic. It works! A woven…
Take a measure of the Banjos hooks and print the appropriate one. 3.4 - 4.0 mm. A VERY cheap investment!
Four different. One without magnet. You have to glue a magnet to the back side. One with 20 x 3 magnet. Insert … the printer will pause One with 10 x 2 magnet. Insert … the printer will pause One with 5 x 2 magnet. Insert … the printer…
This is not a blockbuster but some of you may find it useful :-) Previously I've made lampshades for IKEA Stråla and now I've made a mount for IKEA Skaftet to fit earlier made lampshades. This is the table lamp base…
I made this filament guide so that the filament does not jump off the spool when it is completely full Used this Heavy-Duty filament holder https://www.printables.com/model/1481509-heavy-duty-2kg-filament-spool-holder-step-2kg-spoo
![PenHolder Die (V.I.P Very Important pen[s])](https://media.printables.com/media/prints/72793/images/789540_8c20f562-263e-49be-a7c2-a47b5ee3d224/dsc_1738.jpg)
