Search results: 2in

Sort order

323 models

P
PrintablesHydrotatic

2in1 Cardholder Carry & Display

* v.2.1 made slot support thicker so it doesn't break anymore, requires a little more force to go together but its much stronger. *v.2 Changed dimension to fit Creditcards and can be used as a wallet Perfect for professionals,…

Print approx. €1.91–€2.34 excl. taxPreliminary estimate for one variant

Downloads
1,165
Likes
324
Rating
4
P
PrintablesTimW

2Inch Back Flap Loose Pin Hinge For Theatre

2" Back Flap Loose Pin Hinge For Theatre - from the original by J. R Clancy of Syracuse NY. Created by me in Fusion 360. Used as a demonstration item for my drafting students. I printed the body halves at 0.1mm and the pin at 0.05mm

Print approx. €0.47–€0.57 excl. taxPreliminary estimate for one variant

Downloads
75
Likes
8
Rating
5
P
PrintablesSan G Dice

D20 Vertical (2in x 3.5in) Business Card Holder Print In Place

This is a simple business card holder. It's 2.72" (82.55mm) high (X) 2.8" (73mm) wide (Y) and 2.7" (69mm) thick (Z) in full with a stand on the bottom and holder with tabbed ends on each side. I made it for some vertical business cards I…

Print approx. €4.94–€6.04 excl. taxPreliminary estimate for one variant

Downloads
34
Likes
2
Rating
5
P
PrintablesLinards Rozitis

43mm socket (1/2in drive)

Do understand this will be built from plastic and not as strong, as you may expect. Good enough for boiler anodes and some large non-critical bolts/nuts and for general home plumbing. To be printed with 100% infill. I added a sample…

Print approx. €8.88–€10.85 excl. taxPreliminary estimate for one variant

Downloads
15
Likes
4
Rating
0
P
Printableswubbr

Reducer Bushing to fit AP Bobinquick Junior and Kaiser Film Loader for Kodak 35mm film U-Core (2inch/52mm) and the 400ft to 100ft Respooler

This is to fit the: Kodak 35 mm U-Core 2 inch / 52mm film core/spool and 400ft to 100ft Bulk Film Respooler by @MaslovyRohlik originally the [Thingiverse] 400ft to 100ft Bulk Film Respooler by @broken_perfectionist This is a handy device…

Print approx. €0.46–€0.56 excl. taxPreliminary estimate for one variant

Downloads
15
Likes
2
Rating
0
P

2in NPT to 1.5in NPT Bulkhead Fitting adapter

Adapter to reduce a standard 2in npt bulkhead fitting down to standard pool accessory 1.5in npt as used in a stock tank pool. I print any npt threaded items at .15mm to ensure the thread layers are solid and PETG for use in outdoor /…

Print approx. €4.25–€5.19 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
7
Likes
5
Rating
0
P
Printablesmdkendall

2inch Desktop Vise

A desktop vise for holding small items such as printed circuit boards, models, small parts for assembly, etc. The jaws have a maximum opening of 50mm (about 2 inches). Printable in the orientation shown with no supports. Although the…

Downloads
2,601
Likes
539
Rating
4.91
P
Printablessmysnk

50mm / 2in Hydroponic Net Cup

50mm net cup for hydroponic plants. Print Settings Printer Brand: FlashForge Printer: Creator Pro Rafts: No Supports: No Resolution: 0.2 Category: Outdoor & Garden

Downloads
1,889
Likes
205
Rating
5
P
Printablesvoyczech

iPad stand 2in1

Quick designed stand for drawing and watching on my iPad

Downloads
1,773
Likes
289
Rating
4.92
P
PrintablesMiaoucat

6pod 2inch net cup hydroponic modular tower by rosetta-wang / garden plant module

Modular Hydroponic Tower made for 2inch Net Pod this is the best model as of now and its a world of difference with the other one. the fact that you dont need to spend hundreds of hours more to print the net pods, simply use cheap…

Downloads
870
Likes
341
Rating
0
P
PrintablesJared

32in Skyrim Ebony Sword

This design was created using Adobe Medium and an Oculus Rift/PC. I have sold it for several years in my Etsy store and assembled/shipped about a dozen of them in that time. The files have been heavily refined for maximum success rate…

Downloads
855
Likes
374
Rating
5
P
PrintablesMr. Sullivan

Dewalt Track Saw Guide Adapter for 20v Cordless 6-1/2in Saw

This Dewalt Track Saw Adapter Guide allows you to use your 20v 6-½ in cordless saw with the full size tracks! *Use at your own risk* This design prevents the blade guard from recoiling to cover the blade. Also, typical track saws are…

Downloads
814
Likes
106
Rating
5
P
PrintablesDorffMeister

2.42in OLED Case with optional Platform

This project is for the 2.42" OLED screen (IIC or SPI) Preferably with the pins on the top center of the long side as shown in the pictures. The ESPHome code for this project can be found here at…

Downloads
702
Likes
22
Rating
0
P
PrintablesRichards Makes

6in, 8in, 10in, 12in, 13in, and 14in Tunable Drums with accesssories

I have an updated version at the following link https://www.printables.com/model/753753-3d-printed-marching-tenors-with-attachements Small tunable drums using standard drum heads and 10-32 x 1-1/2" screws. This was modeled in Fusion 360.…

Downloads
688
Likes
140
Rating
4.25
P
Printablesfellowapeman

Waterbox Aquarium 16.5mm to 1/2in LocLine Threaded Nozzle

I got sick of trying to use an adapter so that my Waterbox aquarium return pump would work with ½ inch locline fittings. The original ½ inch adapter that I got from VCA broke, so instead of making a new adapter, I decided to design a…

Downloads
573
Likes
31
Rating
0
P
PrintablesVSpecENG

2in Trailer Hitch Cover

This is a hitch cover for a 2 inch receiver. The spring allows for easy install and removal to keep debris out of the receiver. I also included the F3D in case you wanted to inlay a custom design.

Downloads
393
Likes
34
Rating
4
P
PrintablesSOLäRK

(2019) 7th Generation 10.2in Ipad Case

This is a 2-part Ipad case I designed to fit the 10.2-inch Ipad 7th generation device. I designed this in Fusion 360 and this is my first time using the program. The model is untested but was built using a scale model of the iPad. I…

Downloads
361
Likes
21
Rating
4.5
P
Printableshumming

Bin Cover for Ridgid Pro Gear 22in 1.0

Ridgid, Erbauer, JCB, AEG, Keter, Magnusson modular pro tool boxes ridgid pro gear case bin lid. Not compatible for use in the clear top organizer. Works best if you take the inner lining out of the lid on the 22inch tool box from system…

Downloads
355
Likes
96
Rating
5
P
Printablestheduckom

Supportless Net Cup 2inch, 3inch, 60mm

A 60mm net cup that I made for a mason jar. Could be used for hydroponics. Can be a substitute for other net cups 4-21-20 Added 3 inch and 2 inch, tested both, they are supportless Print Settings Printer: Ender 3 Pro Rafts: Doesn't Matter…

Downloads
311
Likes
55
Rating
5
P
PrintablesClough42

Starrett Combination Squares 4in and 12in Gridfinity

Created using Zack Freedman's Fusion template: https://a360.co/3ccHbsg Copyright (c) 2023 Zachary Freedman and Voidstar Lab LLC

Downloads
307
Likes
54
Rating
0
P
Printablescolbster302

Treasure chest 2in x 4in box with lid hinges and pins

i tried to eliminate overhangs when doing this but there was just a couple that actually need it mostly under the lid. made in onshape before i learned about printed hinge solutions that are much better. i just might redesign this with…

Downloads
290
Likes
26
Rating
0
P
PrintablesRalf M.

2in1 Mount for Worx / Pattfield 20V battery for IKEA Skadis System

Halterung um einen 20V / 40V Akku von Worx oder Pattfield am IKEA Skadis System zu befestigen. Es werden zwei der Universal Hooks des hervorragenden Sets von CSD_Salzburg benötigt. Die Universal Hooks sitzen bewusst sehr straff in der…

Downloads
290
Likes
34
Rating
3.43
P
PrintablesSpectrum3847

Spectrum 3847: 3D printed 1/2in Hex Collar

This collar is based on the AndyMark am-1526 hex collar. This should be used for light-duty applications and prototypes We recommend buying the am-1526 for higher load applications. The collar is to be used on ½" Hex shaft. Use with a ½"…

Downloads
245
Likes
15
Rating
5
P
PrintablesBen

Bucket hose mount for aquarium water change 12.7mm (1/2in) and 14mm outer diameter tubes

2 variants: for tubes with 14mm outer diameter for tubes with ½ inch (12.7mm) outer diameter Print it in PETG for more flexibility. Optimised for printing without supports to save time and material.

Downloads
243
Likes
57
Rating
5
P

Schultz IBC Tote M64 (2in) to 0.75in GHT adapter

I created this to connect to standard IBC tote (shultz brand) with a garden hose for watering. Preferable to print garden hose tip down so the inside of the adapter is smooth.

Downloads
242
Likes
21
Rating
0
P
PrintablesF5 Design

Radius Gauge Convex Concave 2in1

These Gauges are for inside and Outside measuring. The Case for these 29 pieces is available in 0.4mm and 0.8mm wall thickness between the slots, also it looks different. On the Pictures you can see the 0.8mm one. The range is from 1mm to…

Downloads
238
Likes
56
Rating
0
P
PrintablesFILIP125

Milwaukee sawzall / Reciprocating saw blade WOOD WITH NAILS 12inch 5tpi

Quite accurate model of Milwaukee sawzall blade. However, the real blade has a little bit of curve to it and the teeth are bend out. Will be good help when creating your own custom handles and blade protectors.

Downloads
218
Likes
11
Rating
0
P
PrintablesMarcElbichon

Drywall 2in Cable Grommet

Simple drywall grommets for cable management, there are a closed, open and 2 cables (8mm) version. It fit in a 2in hole. Designed for 1/2 drywall Enjoy!

Downloads
207
Likes
51
Rating
5
P
Printablesjuh

IBC tank dual hose connector 1in and 1/2in

Connect a 1 inch and a 1/2 inch garden hose to an IBC tank outlet. I use it to connect the input from the rain collector and an output without having to drill any extra holes in my IBC or having extra external T-connectors. The angle…

Downloads
206
Likes
34
Rating
5
P
PrintablesAWSW

Symmetrical case for WaveShare ESP32-S3 4.2inch RLCD

Symmetrical case for WaveShare ESP32-S3 4.2inch RLCD Simple and fast to print case with symmetrical borders around the display. The case allows to access the USB-C port and SD card slot and comes with 3 little button extensions for the…

Downloads
203
Likes
18
Rating
0
P
PrintablesClough42

12in Max Size Caliper Tray Gridfinity

Two versions are provided: one entire tray, and one split in half to fit on smaller printers. Created using Zack Freedman's Fusion template: https://a360.co/3ccHbsg Copyright (c) 2023 Zachary Freedman and Voidstar Lab LLC

Downloads
193
Likes
28
Rating
0
P
PrintablesTyler Harris

4in mecanum wheels, 1/2in hex axle

Print 2 of the side and 8 of the roller for one wheel. Mirror the side pieces for vectoring in the opposite direction.

Downloads
191
Likes
22
Rating
0
P
PrintablesSkeletalPrints

2in Vectored Intake Wheel - FRC

This is a 2in Vectored Intake Wheel(mecanum wheel), Features a 1/2in hex bore. Hardware: 2x 3/4in 6-32 bolts 2x 6-32 nylock nuts Printed out of PLA, but has not been tested on a robot.…

Downloads
179
Likes
10
Rating
0
P
PrintablesBRE3DLOVE

1/2in Grommet with slit (Electrical box)

===UPDATE February 7, 2024 Print Profile now available: HERE ===ORIGINAL POST Removed one of the tabs so that it can fit around existing cables. The Extended Tabs version has the bigger tabs for a more secure grip.

Downloads
176
Likes
16
Rating
5
P
Printablesme me

Dribby LT 2in rollcage FPV drone frame

This frame is inspired by the driblet frame from rotor riot. It has a functional roll cage arm braces and cam protection. I made this frame to be a light and strong alternative to the driblet, making it a reasonable weight for a micro FPV…

Downloads
175
Likes
16
Rating
0
P
PrintablesDaveRig Design

Split Blast Gate (4in to two 2in)

I started with the original single blast gate design from Jok and resized and made some modifications. Then for added the single 4 inch intake port, (or output port depending on how you want to look at it) The 4 inch side will fit a…

Downloads
172
Likes
30
Rating
0
P
PrintablesHenki71

Stagemonitor 12inch model scale 1:20

Stagemonitor 12inch model scale 1:20

Downloads
167
Likes
54
Rating
5
P
PrintablesMasrawy

Vaccum hose adapter 1-7/8in to 2-1/2in

Vaccum hose adapter 1-7/8in to 2-1/2in for shopvac

Downloads
164
Likes
7
Rating
0
P
PrintablesAmpedFab

Square D NF Panel Board Filler Plate 3.52in W x .99in H

To print these Panel Filer Plates. I printed them with the face down and used support on the side notches. I've Tried them both out of ABS and PLA and both clicked into place perfectly. This got me passed an OSHA inspection in a pinch and…

Downloads
156
Likes
7
Rating
0
P
PrintablesDema_Design

Bottle opener 2in1

Simple bottle opener

Downloads
148
Likes
30
Rating
5
P
PrintablesKrokogator

Foldable pot lid stand and drip tray 2in1

I am proud to present you, made from scratch a pot lid stand/drip tray. This accessory can hold your wet and hot pot lids, as well as your kitchen tools. Less mess on your kitchen countertop! Tips: Print both parts separately, then mount…

Downloads
146
Likes
60
Rating
5
P
PrintablesTony

Gridfinity 3x2 2in Medicine bottle holder for 2 bottles

Gridfinity 3x2 2in Medicine bottle holder for 2 bottles

Downloads
140
Likes
18
Rating
0
P
PrintablesArtem Artem

Creality K1C Tool Tray 2in1

Tool tray for mounting around the left front rubber foot of the printer (48mm). Pull the handle to rotate the tray for easy access. Designed to hold all K1/K1C/K1SE tools that came with the printer, INCLUDING the glue stick (and still…

Downloads
137
Likes
18
Rating
5
P
Printablesaonomus

"Geodesic" Dome Blanket Fort - 1/2in PVC Edition

Note : this is not technically a geodesic dome, but I'm not sure what to call the geometry. Face-centered cubic just doesn't have the same ring to it? Materials PVC Pipe: I bought 10x 10' lengths. PETG: Printed out of 1-3kg (honestly…

Downloads
137
Likes
47
Rating
0
P
PrintablesSsgtStretch

Welding Fence Block 16mm 2in center

These are fencing blocks and locating pins for use on a 2 inch on Center metal Fabrication table with 16 mm holes. Yes they're made of plastic and they will melt if you try and weld too close to them. But they're certainly a lot cheaper…

Downloads
136
Likes
43
Rating
0
P
PrintablesGhostrider

Pittsburgh Pro 1/2in Drive 13 Piece Impact Socket Set - Short Metric - Gridfinity

Made for: https://www.harborfreight.com/12-in-drive-metric-impact-socket-set-13-piece-69345.html Model has the sizes as a separate object if you have a multi color printer. You can also remove that object so the print will have the sizes…

Downloads
132
Likes
23
Rating
5
P
PrintablesHanz2508

Cookie cutter - Tree 12in1

12 trees in one cut without the rest

Downloads
131
Likes
32
Rating
0

3.2inch Air Hockey Puck

3.2inch air hockey puck for incase you ever run out of air hockey pucks. Works on nearly any table that accepts 3.2inch pucks. *Dark colors do not work in most air hockey tables, please use bright colored filament Dimensions: 3.2inch x…

Downloads
129
Likes
2
Rating
0
P
PrintablesFatato

50mm / 2in Hydroponic Net Cup

Another Net Cup. I didn't like what was out there so I made my own. Prints without support and upright

Downloads
129
Likes
16
Rating
0

Bucket Lid Mount For 6pod 2inch net cup hydroponic modular tower by rosetta-wang

I originally made a modified 6 pod section which has integrated mounting tabs but figured a mounting section which attaches to the regular 3 or 6 pod section would be more useful. Uses 4x M5 bolts and nuts to mount.

Downloads
128
Likes
32
Rating
0
P
Printablesjmansad

2in Net Pot Adapter for Mason Jars

Simple ring designed to replace the lid of a standard mason jar to hold a 2 inch net pot

Downloads
125
Likes
24
Rating
0
P
PrintablesSondre Hetland

2inch FPV drone Case

The case is designed to hold a Lightning 2 fpv drone with a top mounted battery holder, and room for six 750mah 2s lipo batteries and 8 two blade 2" props. Might also fit other 2" drone frames. Support my work: All of my models are…

Downloads
123
Likes
15
Rating
4
P
PrintablesPeep Designs

PVC fitting and pipe (1/2in)

just some pvc fittings and a length that can be vertically stretched in a slicer to whatever length that you would need.

Downloads
120
Likes
8
Rating
0
P
PrintablesChris KZ

2in PVC pipe vent screen

A screen that fits inside a 2" PVC coupling to prevent birds and small critters from getting in vent pipes.

Downloads
119
Likes
7
Rating
5
P
Printablesvolarne

2in Net Pot - Tougher

This is a rounded/pointed 2in Net Pot that I made to be tougher (although slightly smaller) than the standard store bought version. This works well for larger / heavier seeds or seedlings, and can take a bit more abuse than the flimsy…

Downloads
119
Likes
9
Rating
0
P
Printables3D_Cre8or

Jumbo Pellet for 2in Potato Cannon

This is an excellent projectile for shooting out of a spud gun with a 2 inch diameter. Just like a regular pellet used with pellet guns, this jumbo pellet stabilizes itself in flight and has excellent accuracy when shot from a spud gun.…

Downloads
118
Likes
22
Rating
0
P
Printableskusdamian

2in1. Gift box/lamp for Mom

A beautiful box with a butterfly drawing for your beloved mother in which you can put her favorite chocolates or other trinkets and give her as a gift. The box can easily turn into a lamp after inserting an LED tealight inside. It will be…

Downloads
116
Likes
15
Rating
0
P
PrintablesSterminatore

Marci's Mount for Hadley: 1/2in electrical conduit with M3/M4 hardware

Ask Marci for the midjoints and endjoints. She made a far superior version of the ones I threw together.

Downloads
114
Likes
35
Rating
5
P
Printablesjyding

16mm to 1/2in Loc-Line Adapter

Adapter made for the innovative marine nuvo powerhead outlet. The aquarium outlet is 16mm but should also fit on a .5in outlet. Will need to print on end with supports on the outside. Recommend printing out of PETG for durability.

Downloads
114
Likes
8
Rating
0
P
PrintablesmozWORLD

SheetShelf: Modular Shelf for Organizing Paper, Cardstock, Laminate, etc Letter Size, 12in Size

I designed this to organize my paper for my new vinyl cutter I got. I uploaded the .step's for easy modification and measurement. You can just adjust the length of the shelf level as you need, its basically a simple extrusion, so it will…

Downloads
113
Likes
38
Rating
0
P
Printablescolbster302

Vampire coffin 5in tall 2.2in wide

Im getting better at designing hinges. these ones snap together (PETG) with a bit of part flexing and a careful pinch Dont mind the black and white situation going on with my print. mine printed great with supports just for the tiny hinge…

Downloads
110
Likes
14
Rating
0
P
PrintablesInducedRug

6-12in Lathe Quick Change Tool Holder Wall Mount

A wall mount for tool holders for 6" - 12" quick change tool post, commonly used with 7"x12" mini lathes. The wall mount supports tool holder with ~43mm wide, ~9.8mm deep, 60 degree dovetails. The quick change tool post is commonly marked…

Downloads
109
Likes
7
Rating
0
P
Printablesdlcincluded

Hydroponic cap (1.5in/2in)

A quick and dirty cap for 3d printed cap for personal hydroponic system, or anything that is ~1.5in hole(small) or 2in hole(large).

Downloads
108
Likes
10
Rating
5
P
Printables303composites

50mm 2in Abrasive pad holder

I printed this out of PLA with 20% infill just to give it a quality tool feeling. It has pockets in the base for magnets if you wanted to have this be mounted to a fab/weld table. Tops are optional but add a nice touch. I have the roloc…

Downloads
105
Likes
23
Rating
5
P
Printablesgamebae

2in1 Phone Holder + Galaxy Watch Charger

There wasn't enough clearance in the original model to connect a usb-c cable to charge the phone while on the stand. I fixed this by making the stand much taller. My S22 Ultra sits very nicely on the stand and is very stable, even though…

Downloads
104
Likes
11
Rating
0
P
Printableslolthekidison

APEX 2inch TPU Parts

Arm guards, use M2 x 6mm motor screws. Camera mount, support for flywoo 1s cam/ caddx ant, similar 14mm mounting cameras. Dipole antenna clamp, pigtail power wire clamp.

Downloads
102
Likes
4
Rating
0

2inch FPV drone

Fully 3D printed frame that I designed for a 2inch fpv drone. I wanted the drone to by fast while still being small and light. The drone weights well under 250g with battery. The frame is inspired by Flywhoo Firefly 2s nano baby 20 . I…

Downloads
100
Likes
12
Rating
0
P
PrintablesRedefine

2in1 Pistachio bowl!

2in1 Pistachio bowl! Stop the mess after eating pistachios with this bowl ! It has a hidden trash can part that can transform into a bowl! This design allows you to print just the top part and use an ikea bowl as the bottom. You can…

Downloads
94
Likes
18
Rating
0

2in Sanding Pad / Sanding Disk Holder

This is a set of holders for 2" Velcro backed sanding pads. I have previously made a set of holders for 5" disks here and from requests, made them for a bunch of grits. I used that info to make these with all of the requested grits right…

Downloads
94
Likes
19
Rating
0
P
PrintablesS197 Designs

Gridfinity 1/2in Drive Collection - Icon & Husky

All my models for ½ in drive. Brands are Icon and Husky. The extensions file and the ratchet will probably work with other brands of extensions.

Downloads
93
Likes
37
Rating
0
P
PrintablesDaVinci2000

Slick Ender 3/3-Pro/5/CR-10 2in1 duct 5015

Most compact hotend and part cooling system for Ender 3 / 3 Pro / 5 / CR-10 and other Creality compatible printers. Weights less than original metal housing, around 40 grams. Designed to reduce unnecessary cooling of heatblock and printed…

Downloads
93
Likes
17
Rating
5
P
PrintablesUnknownkwita

Buckle for 2inch Straps

I wasnt able to find a buckle for 2inch strapping that I liked. So I remixed 3DMakerNoobs. Its basically the same, split down the middle, widened and extended. I printed in PLA.

Downloads
93
Likes
18
Rating
0

Modified 6pod 2inch net cup hydroponic modular tower by rosetta-wang For Bucket Lid

Just a quick mod to the 6pod section to mount to a 5 gallon bucket lid using 4x M5 bolts and matching nuts. Printed in petg for better temperature resistance and layer adhesion over pla.

Downloads
92
Likes
15
Rating
0
P
PrintablesBecca

Gridfinity Vise-Grip 300mm-12in Adjustable Wrench Holder 8x2x4

Gridfinity Vise-Grip 300mm-12in Adjustable Wrench Holder 8x2x4

Downloads
92
Likes
14
Rating
0
P
PrintablesJoe3020

Dust Seperator to 2in Shop Vacuum Adapter

Simple, slightly overbuilt, adapter to go from the inlet on a dust deputy to the small sized shop vac hose that came with my 8gal shop vac (ID ~53mm/2in on the connection). Should work for a the full 2in hose, but you'll probably loose a…

Downloads
91
Likes
9
Rating
0
P
PrintablesJumpbase

12Inch Silicon Wafer Stand

This is a Display Stand for a 12 Inch (30 cm) Silicon Wafer On my 30x30cm Printing bed i could print in one piece For smaller printers i did make a 2 piece version that needs to be glued together For printing orientation you just need to…

Downloads
89
Likes
7
Rating
0
P
PrintablesTetsu
Downloads
89
Likes
7
Rating
0
P
PrintablesZedWizid

Alabama Cookie Cutters (3in and 2in)

My mother is a baker and I make all kinds of cookie cutters for her. Here are some Alabama 'A' cookie cutters in two sizes (2inch and 3inch) I modeled. Would be great for fondant and probably also cookies! Be advised, PLA is food safe,…

Downloads
86
Likes
6
Rating
0
P
Printablesbassklampfe

Modified base for "2inch Desktop Vise"

I wanted to use the “2inch Desktop Vise” together with my Magnetic Helping Hand ¹) and the PLA-printed vise simply promised to be too light to have a firm stand. So I added holes to the base, where I could add 8 neodym magnets (two for…

Downloads
86
Likes
13
Rating
0
P
PrintablesMiron

BearQuads TinyBear 2inch drone racing frame TPU parts

BearQuads TinyBear 2inch drone racing frame TPU parts You can find the frame here: https://armattanproductions.com/pages/product_details/33079 https://www.facebook.com/BearQuads

Downloads
86
Likes
15
Rating
0
P
PrintablesRex

Quinn 1/2in SAE Impact Socket Holder

Gridfinity compatible socket holder for Quinn 1/2in SAE impact sockets from their master impact socket set (P/N 58680). The model is too large for most printer beds. You can use your slicer to cut it into smaller sections.

Downloads
85
Likes
8
Rating
0

Flexi DogTag with Collar 2in1 not for lead - Ohebná Psí známka s obojkem 2v1 ne pro vodítko

ENG: Flexi Dog tag with collar in one not for lead . A dog tag can easily get lost, which is why I created a dog tag with a collar in one. length: 44-45cm /17.3-17.7 inches. If interested, I will make other sizes as well Not everyone…

Downloads
82
Likes
9
Rating
0
P
PrintablesIchooorrr

1/2inch Marble/Steel ball container v2

1/2inch Marble/Steel ball container, suitble for Gravitrax balls. It can hold up to 32 balls.

Downloads
82
Likes
7
Rating
4
P
PrintablesFPVLeo

Lid for 2inch Netcup Hydroponic Systems

A simple lid to plug empty 2inch Netcup holes in a Hydroponic System to prevent algae growth. Can be printed in any non-transparent material.

Downloads
76
Likes
12
Rating
0
P
PrintablesNils

Hex socket adapter 1/2inch

'lil adapter that allows to drive the screws without any torque. When I change the tires, there is always 4*5 screws to tighten. Each one with 20 turns. OMG 400 TURNS. :) All done by hand. And after that they are to tighten up to the…

Downloads
75
Likes
3
Rating
0

2IN PVC to 90MM Fan Adapter

This adapter mates a standard 90MM computer fan to 2" schedule 40 PVC. Two designs are included to facilitate both male and female PVC connections.

Downloads
74
Likes
6
Rating
0
P
PrintablesRex

Quinn 1/2in Metric Impact Socket Holder

Gridfinity compatible socket holder for Quinn 1/2in metric impact sockets from their master impact socket set (P/N 58680). The model is too large for most printer beds. You can use your slicer to cut it into smaller sections. Note: The…

Downloads
74
Likes
11
Rating
0
P
PrintablesDajosco

2in receiver hitch cover Open Source Logo

Remix from Hitch Cover by stimpy 724837 with the Open Source Logo. Made my own from scratch on Fusion360 and I am sharing the files so you can make your own tweeks Print Settings Printer Brand: Prusa Printer: i3 MK3 MMU 2 Rafts: No…

Downloads
74
Likes
7
Rating
0
P
PrintablesBaumino

Calibration Tower Heigth 10-50mm (2inches) (10mm Steps)

Calibration Tower Height 10-50mm (10mm Steps) Tower mit Stufen in 10mm Schritten zur Calibration der Z Achse Print Settings Printer Brand: Creality Printer: Ender 3 Filament: BASF PLA black Category: 3D Printing Tests

Downloads
70
Likes
4
Rating
5
P
PrintablesOliver Xie

Magnetic iPadPro 12inch stand

Features magnetic attachment adjustable pitch angle adjustable iPad rotation, with 90deg clicks Additional Material A rod in 32mm diameter. I'm using the core of a depleted plastic wrap 6-32-½ machine screws x 2 4x4x3mm magnets x 89 Super…

Downloads
70
Likes
23
Rating
0
P
PrintablesDizzelowski

Ricoh Theta Z1 2in1 Adapter/Stand

The Ricoh Theta Z1 camera has 2 problems, that can be solved using this model: The camera can not stand on its own if you want to use the USB-C port (e.g. for 360-Livestreaming) When using a tripod, the USB-C port is covered by most…

Downloads
69
Likes
5
Rating
0
P
PrintablesPotatoGambit

Helmet Hanger 1.25in, 1.5in, 1.75in, and 2in tube sizes

A simple hinged helmet/headset hanger for utvs or anything with overhead tubes. I included the most common sizes 1.25, 1.5, 1.75 and 2in. I also included the fusion file if you need something different, just update the tube diameter…

Downloads
68
Likes
2
Rating
0
P
PrintablesSam Schultz

Finial Fence Post Topper Inner Diameter 1/2in

Recommend printing with 3 walls, 15 percent gyroid infill. ABS/ASA recommended for outdoor use.

Downloads
67
Likes
7
Rating
0
P
PrintablesReeDoet3D

Desktop case for HP MCR22IN1 22-in-1 card reader

From an old HP/Compaq computer, I rescued a card-reader normally mounted in a 2.5" drive bay. I designed a case for it that uses the original screws to hold it in. The back is completely closed and the cable, which has a 2x5 JTAG Header…

Downloads
67
Likes
12
Rating
0
P
Printablesmbuaux

AEG 2in1 Ergorapido Universal Adapter

AEG 2in1 Ergorapido Universal Adapter since a lot of models are available for a round connector

Downloads
67
Likes
3
Rating
0
P
PrintablesD20Draconic

Simple Wall for DnD 2inch

if you are looking for a simple and quick to print wall for your board games, this model is the one! They measure is 2 inches long and 1 inch high. and it has the clips to easily attach them together Thank you for your support! follow me…

Downloads
67
Likes
16
Rating
0
P
PrintablesTA Designs

PVC Pipe Caps 1/2in 3/4in 1in

I made 3 different-sized caps for these sized pipes: 1/2in, 3/4in, and 1in They fit onto the pipes really well and are decently tight, but these are not waterproof unless you use PVC pipe glue. Very strong and doesn't cost much filament…

Downloads
66
Likes
5
Rating
5
P
PrintablesMr_D

AOC 32inch monitor raiser

Printed at 75mm/s (infill speed) and 50mm/s (wall speed) 215 extruder 60 bed 0.3 mm with 0.4mm nozzle

Downloads
65
Likes
10
Rating
5
P
Printablesjyc35

Geeetech A20m mount 2in1 bigtreetech cyclops hotend

11/26/2020 Update: V3!! (Green) Fixed part that was touching M5 screws, Added mounting point for 40mm fan As i accidentally destroyed my Geeetech A20m hotend trying to unclogged it. So i'm designing a mount / backplate for the Bigtreetech…

Downloads
64
Likes
12
Rating
5
P
PrintablesMichael Ross

KATO VIADUCT SHOPS 2in Lift - NSCALE

These models are to lift KATO NSCALE VIADUCT SHOPS For window and the front entry I used the following: 10 Pack 12x12x.02” Clear Plastic Sheet, Plexiglass Craft Plastic Sheets PET Flexible Lightweight Clear Plastic Sheets for DIY Craft…

Downloads
64
Likes
14
Rating
0