Search results: 365

Sort order

536 models

P
Printableskev

IKEA 365+ Lid Holder / Deckelhalter - 10 Slots

Remix of version V2.1 by Simon with 10 instead of 5 slots. Fits square lids with a length of 15 cm or rectangular lids with a length of 21 cm (upright) Printed using PETG | 30% infill | no supports required

Downloads
9,068
Likes
3,316
Rating
4.97
P
Printables3D-Print Brehm

IKEA 365+ Box 10,6 Liter - Filament Dry Box mit 2x Silica Zylinder (für PRUSAMENT 2 Rollen) mit digital Hygrometer

Hallo zusammen, hier mal wieder einige Optimierungen für meine 3D-Druckwerkstatt, die ich euch gerne zum Nachdruck übergeben möchte. Um die Druckqualität zu erhöhen, habe ich mir dann doch mal einen Drybox gebaut und verschiedene Entwürfe…

Downloads
2,360
Likes
399
Rating
4.33
P
PrintablesOestle

IKEA 365+ 10.6l Filament Storage & Dry Box

Modular filament storage & dry box using the IKEA 10.6l containers that can fit 2 spools of 1kg filament. All the parts for one box fit on the buildplate of the MK4 and can be printed at once. Currently for storage only, but that's all i…

Downloads
895
Likes
201
Rating
4.89
P
Printablesfeni

Ikea 365 Lid Holder - Kitchen organizer

I really liked Simon's remix of the IKEA 365 lid holder, but I prefer to use a 6mm nozzle and PETG which is less brittle than PLA. Also, PLA is so hard it may scratch cupboards. So provided 3mf and gcode for convenience. Prints in 7 hours…

Downloads
556
Likes
157
Rating
5
P
PrintablesOndřej Lakota
Downloads
334
Likes
68
Rating
4.71
P
PrintablesKonkey Dong

BMW E36 power window switch inner piece. 61318365300

Print from PETG, ABS or other heat resistant material. For this piece use clear see through filament because of the LED. Original switch part number: 61318365300.

Downloads
179
Likes
28
Rating
0
P
Printableswoelpi

IKEA 365+ 10.8l sliding desiccant container for Drybox

This desiccant box uses the lid of the IKEA 365+ 10.8l. I wanted to be able to remove the desiccant more easily than other solutions and came up with attaching the desiccant container to the lid. It is assembled with doulbe sided acyrlic…

Downloads
150
Likes
48
Rating
4.5
P
PrintablesArea51

IKEA 365+ IPA Tank Strainer

Owning a resin printer, washing the printed parts in IPA is an essential post processing step. This model is a strainer for the IKEA 365+ 1.4L food box - it is a good choice as has a lit with silicone sealer, is chemical resistant and can…

Downloads
138
Likes
28
Rating
5
P
PrintablesOtty_Skipper

Ikea 365+ Stackable Cap Ikea Glas Deckel

Moin, ich habe für unsere Ikea Gläser (365+ 45cl) einen Schutz vor Fliegen und anderen Insekten entworfen. Das Haus in der Mitte dient als Griff. Damit man sie jedoch platzsparend stapeln kann, sind die Häuser verschieden groß.

Downloads
125
Likes
24
Rating
0
P
PrintablesZohan#4775

Ikea 365+ IHÄRDIG Gewürzglas / Gewürzmühle schraubbarer Trichter

Schraubbarer Trichter zum leichteren Einfüllen von Gewürzen und Kräutern in die sehr beliebten Ikea 365+ IHÄRDIG Gewürzgläser / Gewürzmühlen. Ebenso passt er für nahezu jedes Gewürzglas auf dem Markt, sei es Rewe, Edeka, Penny, Norma,…

Downloads
108
Likes
25
Rating
5
P
PrintablesTeo_211

Eurocopter AS365N3+ Dauphin Wall Art

Eurocopter AS365N3+ Dauphin Helicopter Wall Art Silhouette Model. Adjustable size. I accept model suggestions.

Downloads
89
Likes
10
Rating
5
P
PrintablesZohan#4775

Ikea 365+ IHÄRDIG Gewürzglas / Gewürzmühle schraubbarer Deckel

Schraubbarer Deckel zum sicheren Verschliessen von Gewürzen und Kräutern der sehr beliebten Ikea 365+ IHÄRDIG Gewürzgläser / Gewürzmühlen. Ebenso passt er für nahezu jedes Gewürzglas auf dem Markt, sei es Rewe, Edeka, Penny, Norma, Netto…

Downloads
78
Likes
22
Rating
5
P
PrintablesMartinPP

Holder for scooter lock Xiaomi M365

Lock on Amazon: https://amzn.eu/d/8VSgIAV

Downloads
19
Likes
1
Rating
0
P
PrintablesSimon

IKEA 365+ Lid Holder - Kitchen organizer

A holder for your IKEA 365 lids. May suit others. It is designed to be fed from the side as well to fit shelves and not only drawers. Due to large surface area, you should be careful printing on glass without adheseive or brim. Printed in…

Downloads
6,462
Likes
1,922
Rating
4.8
P
PrintablesMOrmesher

Ikea 365 Food Container Lid Hanger - Parametric

This is a parametric hanger for Ikea 365 food storage container lids - you can tweak how wide you want it, how many hooks, what size screw holes, and how many screws It was inspired by neuromorph's model linked below but remade from…

Downloads
3,390
Likes
1,692
Rating
5
P
PrintablesPlasticBarista

Scooter / Bike Phone Stand Mount (M365)

STLs All files are in correct Z orientation Main (Use one of the following) + main.stl (for ~22.5mm handlebar) + main-short.stl (shorter stem) + main-32mm.stl (for ~32mm handlebar) * jaw.stl * screw.stl Clip (Use one of the following) +…

Downloads
2,767
Likes
615
Rating
5
P
PrintablesDIY_CYBERPUNK

Universal Plastic Lid Hanger/Holder (IKEA 365+, Lidl, No Brand, etc.)

I had a collection of no brand silicone and glass containers with plastic lids like in IKEA 365+ containers and wanted to print one of the existing hanger models. I couldn't find much on printables but found some good examples on…

Downloads
2,470
Likes
560
Rating
4.92
P
Printablesjanth

Universal Plastic Lid Hanger/Holder (IKEA 365+, Lidl, No Brand, etc.) without Screw Holes

For detailed information, please check the original model . Please only comment here regarding the missing screw holes; anything else should be commented with the original model here .

Downloads
2,153
Likes
907
Rating
4.63
P
PrintablesTwotone74

Drybox made with IKEA 365+ 10,6l food container

English I originally published this drybox on thingiverse (thing nr. 3884699). It became quiet popular, so I decided to publish it here again (I will no longer publish any designs on thingiverse). If you need changes like e.g. equal…

Downloads
1,990
Likes
462
Rating
4.52
P
PrintablesTeachingTech

Print in place tank body (FAB365 style)

The articulated tank chassis by EXTREME3DPRINT is available for purchase here: https://cults3d.com/en/3d-model/gadget/pipbot-1-print-in-place-robot Inspired by the models from FAB365: http://www.fab365.net/ My design process is covered in…

Downloads
1,720
Likes
419
Rating
4.88
P
Printablesdr.ocho

Gridfinity ikea 365+ lid continer / holder / kitchen organizer

Gridfinity 5x4 (standard size 42mm) container/holder/kitchen organizer for 10 ikea 365+ plastic lids. Slot is long enough to fit biggest 365+ rectangular plastic lid so it easily holds other (round and square) lids as well. I don't have…

Downloads
1,681
Likes
266
Rating
5
P
PrintablesKorakot E.

Ikea 365+ 10.6L Spool Holder Filament Dry Box

Spool Holder / Filament Dry Box for Ikea 365+ 10.6L box --- This model use Ikea 365+ 10.6L that can put 2 spool per box I also have model for one spool per box available here:…

Downloads
1,579
Likes
253
Rating
4.55
P
PrintablesKIL0

IKEA 365+ Lid Holder

Sick of these lids flying around inside the drawer I created these stack cages. The height fit inside the drawers for IKEA IVAR.

Downloads
1,438
Likes
360
Rating
4.94
P
Printablesfoorschtbar

Filament Dry Box with Dual Spool Holder and Tube Outlet for IKEA365+

Model updated! All parts improved! This is a drying box for filament with a spool holder for two spools and matching outlets in an airtight IKEA365+ food container. The filament outlets is optimized for the PC4-M6 fittings and allows the…

Downloads
1,178
Likes
277
Rating
5
P
Printablesspofali

Ikea 365+ LID Holder - longer lid

Lid holder for 21cm lid for IKEA 365+ Good for storing upto 5 lids.

Downloads
1,100
Likes
370
Rating
4.91
P
PrintablesHerranz

IKEA 365+ 10,6l Drybox - 2 x 1Kg filaments rolls

A remix of Twotone74 drybox for the Ikea 365+ with equal rollers and a larger silica box/tray to put even more silica. As in the original model the max diameter of the spool is 200mm. Bill of Material: 8x 608 ballbearings (the one in the…

Downloads
924
Likes
124
Rating
4.67
P
PrintablesYuval Tal

ikea 365+ dry box

Remixed the ultra wide version to fit the mk3S+ build plate size without changing any of the dimensions. Redesigned the rollers for a 608zz bearings. look for the orientation of how to print the parts in the photos.

Downloads
897
Likes
154
Rating
5
P
PrintablesPyry

Filament Spool Drybox – Ikea 365+

I designed this drybox with optimal space usage and minimal printing volume in mind. It uses practically all the available space inside the Ikea container. It can hold larger filament spools than other Ikea 365+ dryboxes I have seen. It…

Downloads
875
Likes
178
Rating
4.84
P
PrintablesMartin Šustr

Fab365 Millenium Falcon stand

Simple stand for model of Millenium Falcon created by GOODESIGN from website Fab365. https://fab365.net/items/277 stand is 115 mm tall and useable for rear left pocket for landing gear. Model is rotated 5 degrees down in front direction…

Downloads
868
Likes
102
Rating
5
P
PrintablesStephen Nielsen

Desk Holster for Sig Sauer P365

A friend of mine wanted a holster to screw into the bottom of his desk, but couldn't find one in the orientation he wanted. This holster clips around the trigger guard. This makes it easy to put in, but a little difficult to pull out. The…

Downloads
707
Likes
112
Rating
5
P
PrintablesEvashape

1-3KG Dry Spool Box - Ikea 365 10.6L

Ensuring your filament is dry during printing can greatly improve print quality. This is especially important in humid climates and for more hydroscopic materials like Nylons and TPUs. We weren't happy with available printed dry boxes and…

Downloads
692
Likes
193
Rating
3.5
P
PrintablesGMagician

Drybox Ikea 365+ 10.6l & autorewind (and not) spoolholder

I like Ikea 365+ box because it's sealed but I also like autorewinders for MMU2, then here is my mashup. Up to 2 spools, max 63mm width, can be used simultaneously and if no springs are used into hub...this can be used as a normal spool…

Downloads
662
Likes
99
Rating
4.5
P
PrintablesAlexMu

Dry box insert IKEA 365+

Silica gel ( i used wisedry changes color when saturated) Hygrometer Spool box mount https://www.printables.com/model/487842-dry-box-filament-roller-insert-ikea-365 roller bar

Downloads
617
Likes
118
Rating
4.9
P
Printablesidesire90

IKEA 365+ Drybox Spoolholder (also for smaller Printers)

>Version for 1 Spool< >Version for 3 Spools< IKEA 365+ 10,6l Drybox Spoolholder for 2 Spool, with space for Silica / Desiccant and a Xiaomi Miija Bluetooth Thermometer. Update 2024-04-01 Added a splitted in 2 parts version for smaller…

Downloads
613
Likes
98
Rating
5
P
PrintablesMoragor

Desiccant container for Ikea 365+ 10.6l box

This is a simple desiccant container that fits into an Ikea 365+ 10.6 liters box (or similar sized/larger boxes of your choice). The lid is held on by clips (I recommend two) to make it spill resistant. Dimensions are approx. 150x64x58mm…

Downloads
610
Likes
115
Rating
4.89
P
PrintablesNick Glennon

Rim Protector Xiaomi M365 scooter changing tire tyre wheel hub saver

Fairly form fitting to the wheel's contour to minimize stress, it has just enough wiggle room to get on and off without a problem. I'd recommend trying to remove them once you have one side of the tire out, otherwise they are effectively…

Downloads
589
Likes
138
Rating
5
P
Printablesysengard

Xiaomi m365 Anti Vibration Pad

I was using one of the other anti vibration pads but they kept falling off, and I keep losing them. This design uses the main screw to keep it all in place but requires a 5mm hex tool to remove the screw, but it takes less then 5 minutes…

Downloads
584
Likes
55
Rating
5
P
PrintablesNarish Nakah

Xiaomi M365/M365 Pro/1S/Pro 2 Electric Scooter Back Mudguard

I got an old scooter from a friend, but the rear mudguard was broken off and missing. I designed this to be as close to the original as possible while still being easy to print. -----Slicing----- Because this model is too large to fit on…

Downloads
583
Likes
73
Rating
0
P
PrintablesR0Burli

IKEA 365+ Filament Dry Box & Spool Holder

So i modeled an insert for IKEA 365+ boxes. I made it so that there are about 250g of silica beads stored in the tray directly underneath the filament spools. You can also put those little packs of silica gel (which come packaged with new…

Downloads
576
Likes
81
Rating
4
P
Printablesalfrenovsky

Xiaomi m365 scooter mudguard bracket

Sturdier tha others and printable without support. NEW VERSION. With ears for better fixation.

Downloads
505
Likes
55
Rating
4.5

Reinforced Rear Fender Replacement for Xiaomi M365 Electric Scooter

Rear fender replacement for Xiaomi M365 scooter. This part is both stronger and lighter (160g) than the original one, though I did manage to break it after a while, so consider using one of the aftermarket fender supports. Print Settings…

Downloads
489
Likes
43
Rating
0
P
Printableskikko

IKEA 365+ 10,6L food container

ENG This is the 3D model of the popular IKEA 10.6L container , designed to verify that a custom Filament Storage solution will fit inside it. The dimensions were measured manually with unprofessional tools, but they've proven to be…

Downloads
486
Likes
58
Rating
5
P
PrintablesChristos

Xiaomi fender M365

Just a mix of deferent xiaomi fenders Print instructions Print with supports

Downloads
476
Likes
47
Rating
5
P
Printablestrrevvorr

IKEA 365+ Lid Hanger - Parametric

I have a lot of IKEA 365+ lids and they were taking up too much space in my cabinet so I decided to design a hanger for them. There are other designs available but I needed something a little different. My requirements were: parametric…

Downloads
473
Likes
144
Rating
5
P
PrintablesAlexMu

Dry box Filament roller insert IKEA 365+

You can glue the holder or you drill holes and mount it with screws. Works great with https://www.printables.com/model/115434-dry-box-insert-ikea-365

Downloads
470
Likes
96
Rating
5
P
PrintablesPatrik Zak

Xiaomi electric scooter M365 rear light cable guard

This protects the cable connector in the rear of the scooter from being damaged over time. I just glue it in.

Downloads
449
Likes
77
Rating
4.83
P
PrintablesAntoDelG

Guardabarros trasero / Rear mudguard Xiaomi Mijia M365

Necesita soportes, es un poco más corto que el original EDIT: v2: se ha ajustado la distancia del enganche para el gancho de pliegue, debería quedar similar al original. - hook position fixed LICENSE: NON COMMERCIAL prohibida la venta de…

Downloads
447
Likes
36
Rating
5
P
PrintablesSpartanIvy

Manual Safety Cutout Template for Sig P365 XMacro

Use this template to remove the material necessary to accommodate a manual safety. The XMacro has a thicker frame than the normal 365, so I remixed the template to widen it the necessary amount. Just print the model (I recommend 4 copies…

Downloads
415
Likes
25
Rating
0
P
PrintablesCL Performance

IKEA 365+ Drybox & Auto rewind Storage Box for 2 Spools supporting eSun, Extrudr, Spectrum, R3d and more

Have you ever looked for a Drybox to print directly out of it while it stands on the top of your printer? Even with the QIDI printers, where you have struts on the backside, it is now possible to print directly out of the storage box. you…

Downloads
413
Likes
111
Rating
5
P
PrintablesTitan

Doc Green (Xiaomi M365, Pro and Mijia) E-Scooter Anti Vibration Damper 0.2mm to 2mm

Designed specifically for the Doc Green ESA 5000 (Xiaomi M365 / Pro clone) E-Scooter (periodically sold by Lidl) but potentially compatible with the Xiaomi M365, Pro and Mijia versions too (no guarantees however). These Vibration…

Downloads
389
Likes
39
Rating
5
P
Printablesjeveli

Xiaomi M365 Hook

Hook for the Xiaomi M365 Print Settings Printer Brand: FlashForge Printer: Guider II Rafts: No Supports: Yes Resolution: 0.15 Infill: 100 Filament: PLA eSUN Category: DIY

Downloads
388
Likes
31
Rating
5
P
Printablesanonymoususer

Sig P365 Macro 10rd Baseplate Adapter

Baseplate adapter to make 10rd p365 magazines compatible with the macro grip. Mainly designed for compliance in 10rd limited states. Can be printed standing up, or on its side. Recommended 4+ walls.

Downloads
386
Likes
17
Rating
0
P
PrintablesHoluboy

Xiaomi M365 universal clamp

A clamp for Xiaomi M365 electric scooter. Fits all "Just Why Design" gadgets. Three M4 and two M6 screw sets and 3M double side sticker should be used during installation.

Downloads
372
Likes
59
Rating
5
P
Printablesjsada.xyz

Clippy 2021 / Microsoft 365 Paperclip Emoji

Microsoft published this tweet saying it might be back on Office replacing the paperclip emoji. My Print: Supports: Yes Layer heigh: variable between 0.1 and 0.2 (PrusaSlicer option) Scale: 64% (10 cm tall) clippy-complete.stl can be…

Downloads
350
Likes
125
Rating
5
P
PrintablesSileTv1998

Seperator/Zwischenstück for Ikea 365 Filament Drybox

While using this Drybox i noticed that if you don check the alignment of the Spools they can unwind each other. So i designed an seperator to divide both Spools. I fixed it with two drops of glue. Während des benutzen dieser Trockenbox…

Downloads
348
Likes
83
Rating
5
P
PrintablesTomrom

Ultrawide Frame for Screwing - IKEA365+ Filament dry box

Unfortunatly in Armin3dp's original design there's no ultrawide version of a frame to bolt together for smaller printers, thus I made this novice mash-up in TinkerCAD of the existing versions. Simply use with the already existing…

Downloads
344
Likes
57
Rating
5
P
Printablesthall72

Lego Compatible (3659.dat) Arch 1 x 4

This model is compatible with the lego system.

Downloads
343
Likes
28
Rating
0
P
PrintablesPatrik

Drybox / Spool Holder for IKEA 365+ 10.6L

The drybox is made from an IKEA 365+ 10.6 l food storage container , with a spool holder for spools up to 2 kg. Optional holders for the following humidity sensors are included: The humidity/temperature sensor used in the Prusa enclosures…

Downloads
327
Likes
53
Rating
5
P
PrintablesSupershape

Traxxas Rustler A frame Arm Part #3655

Part# 3655 Print 100% infill. PETG or ABS. TPU is a great option too. a Near perfect duplicate of the original. A few areas are made thicker.

Downloads
316
Likes
33
Rating
0
P
PrintablesDub3D

Xiaomi M365 / M365 Pro Rear Mudguard Support Set

KEY BENEFITS: no need to remove the wheel for installation no need to readjust brake disc no need to change the original screws (just add 1XM3 10mm and 1XM3 nut) no need to modify the original rear wheel cups suitable for 8 and 10 inch…

Downloads
313
Likes
40
Rating
4.33
P
PrintablesAustin Lively

P365/TLR7sub "Gaspedal" V2

“Gaspedal” thumb support to aid in recoil control! Now much more streamlined and uses more standard hardware. You can still have this printed in metal for a more robust feel, but since the threads are handled by the inserted nut you can…

Downloads
311
Likes
41
Rating
4
P
PrintablesAunonymousLlama

3650 Motor Mount for RC Boat

I printed it with the face touching the motor on the print bed and it broke after just a few minutes. I was also using PLA so it was bound to fail… This should work with any motor that uses M3 bolts mounted on a 25mm circle. Print with as…

Downloads
310
Likes
23
Rating
5
P
Printablesanonymoususer

Sig P365 Striker/Backplate Removal+Install Tool

Use the short wedge to push the striker cylinder nub inwards, and the long wedge to push the nub downwards. The other part is used for reinstallation of the striker and backplate. See…

Downloads
302
Likes
14
Rating
5
P
PrintablesZkaza

Xiaomi M365 Scooter - Folding Hook Ring

No Supports is needed. PETG, 4 perimeters. Original from: https://www.thingiverse.com/thing:3190522

Downloads
300
Likes
42
Rating
4.67
P
PrintablesHans Schulz

IBM System x3650 M4 2.5" Tray

Compatible for (at least) these IBM servers: X3550 M4 X3630 M4 X3650 M4 X3850 X5 X3950 X5 Fits 2.5" HDDs and SSDs with a maximum height of 15mm. Included is a version that requires (countersunk) screws and a screw-less one that clips into…

Downloads
296
Likes
20
Rating
5
P
PrintablesDrSchiduwi

IKEA 365+ lid / cover storage

Deutsch: Ich habe zum Stapeln uns besserem verstauen der Deckel für die IKEA Serie 365+ eine Datei Konstruiert.. In dieser Version kann man bis zu 8, 12 oder 16 Deckel Stapeln. Es ist Kompatibel mit der 1, 1,8 und 2 Liter Variante. Zum…

Downloads
295
Likes
61
Rating
5
P
PrintablesDavid Kingsman

Ikea 365+ food container mount for the Ikea Skadis system.

Mount for the Ikea Skadis system. The container is a IKEA 365+ Food container, square/plastic 750 ml https://www.ikea.com/us/en/p/ikea-365-food-container-square-plastic-50359176/ This model uses the great Skadis_Universal Hook by…

Downloads
287
Likes
134
Rating
4.67
P
PrintablesRick269

FAB365 Star Destroyer display stand

This is a display stand for the excellent (Free to download!) FAB365 Star Destroyer model (Designed by GOODesign studio). https://fab365.net/items/505#inform I actually thought this was going to be easy but the centre of gravity is not…

Downloads
287
Likes
32
Rating
5
P
PrintablesAntoDelG

Xiaomi Mijia M365 Mudguard Bracket - Soporte Guardabarros

Soporte para fijar el guardabarros del xiaomi m365. ( Para imprimirse necesita, al menos, colocar un soporte en la parte más alta, donde engancha con la luz del guardabarros) Xiaomi Mijia M365 Mudguard Bracket (needs at least 1 support in…

Downloads
268
Likes
34
Rating
0
P
PrintablesBas

MMU2 filament buffer and spool within an Ikea drybox 365+ 10.6liter, Version 4

This is a filament buffer and spool within an 'Ikea drybox 365+ 10.6 liter' for the MMU2s. I wanted my filament-spool, but also the whole route to my MMU2, in a dry and protected environment. So I designed a buffer within the largest…

Downloads
268
Likes
80
Rating
5
P
Printablesabzyweb

Stand for Scooter Xiaomi m365

A Stand i designed to have my scooter stand up somewhere without drilling holes into the wall to hang it.

Downloads
267
Likes
56
Rating
4.5
P
Printablesspace_chef

P365 - Display Stand

Another version of a pistol stand Separated the logos/text/magazine to print in multiple colors Includes a few logo variations and P365 text Included assembled version in case anyone wants just a single print You can only use 1 logo Kept…

Downloads
260
Likes
33
Rating
0
P
PrintablesDrSchiduwi

IKEA 365+ square lid / cover storage

Deutsch: Ich habe zum Stapeln uns besserem verstauen der Deckel für die IKEA Serie 365+ eine Datei Konstruiert.. In dieser Version kann man bis zu 8, 12 oder 16 Deckel Stapeln. Es ist Kompatibel mit der 600 Milliliter Variante. English: I…

Downloads
253
Likes
65
Rating
4.75
P
PrintablesAndré Högberg

IKEA 365+ Lid Holder (alch grid)

Storage box for the IKEA 365+ Lid Holder for the grid system made by Alex Chappel (https://www.alch.shop/).

Downloads
253
Likes
16
Rating
5
P
PrintablesDavyGD

Ikea 365 10.6L Drybox (Updated)

UPDATE! I have added a new narrow version of the filament passthrough (V3). The witdht of the passthrough in this version is 30mm, an accompanying holeguide has been added as well!…

Downloads
253
Likes
57
Rating
4.67
P
Printablesjacekpom

Xiaomi m365 pro 2 electric scooter hook

3 models of xiaomi m365 pro or pro 2 scooter hooks (it will probably fit other models) the first is a slim version for light luggage need 14mm screw with flat head second one (strong) needs a longer 20mm screw with cone head and you can…

Downloads
250
Likes
20
Rating
0
P
PrintablesNiSE

P365/TLR7sub "Gaspedal" V2 - NiSE Remix V4

This is a modified version of Austin Lively's p365 tlr7sub mounts to tight up the mounting and better suit my personal preferences. I settled on this length after trying out a few variances because it's the largest shelf that can be added…

Downloads
249
Likes
22
Rating
0
P
PrintablesMarcel40625

Gap Fix - new Front & Roller Remake | 1-3KG Dry Spool Box - Ikea 365 10.6L

Original Front was to short for me so i had a 7-8mm gap, and Remake for adding adjustable rollers with 608zz ball bearings. dimension for ball bearings: - outer diameter 22mm - inner diameter 8mm - thickness 7mm

Downloads
249
Likes
50
Rating
0

Ikea 365+ Knife Set Sheaths

This is set of sheaths (small, medium and large) for the Ikea 365+ 3-piece knife set. Printed on a CoreXY printer standing upright with a brim. In this orientation, no supports are needed, but it might not be viable on bedslinging…

Downloads
248
Likes
15
Rating
5
P
Printablesmaxelman

IKEA 365+ SIX SLOT Lid Holder

A holder for 6 IKEA 365 lids. May suit others. It is designed to be fed from the top when placed in drawers.

Downloads
247
Likes
78
Rating
5
P
PrintablesGustav

Easy to install stealthy AirTag holder for Xiaomi M365 scooter

A replacement rear wheel nut cover that also fits an AirTag. Fusion 360 file is provided so it can easily be adapted for newer Xioami scooters. Print in picture was printed with 0.6mm nozzle and PLA. If scooter lives outside, PETG or…

Downloads
241
Likes
57
Rating
5
P
PrintablesLightValen

Stand for Fab365 Tie Interceptor (Tie Fighter)

I started with version one by making the stand fit the Tie Interceptor exactly. This had a elogated base to shift the centre of gravity and stress supports to make the structure stronger. I then tried to simplify everything. It turned…

Downloads
239
Likes
28
Rating
4.67
P
PrintablesModel Magic

Miami Vice - Crockett, Tubbs, Elvis & Ferrari 365 GTS/4 Daytona Spyder - 1984

⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…

Downloads
238
Likes
27
Rating
0
P
PrintablesDiggerw1

Ikea 365+ 10.6l

Spool holder for Ikea 365+ 10.6l box for storage with thermometer and hydrometer. It annoyed me that the spools kept rolling back and forth. All the others I found always came with ball bearings and other accessories for printing out of…

Downloads
229
Likes
44
Rating
5
P
Printablestimf

Xiaomi Mijia M365 Scooter Front Mudguard

Broke my front mudguard (by over tightening the screw) after replacing my front tire. Definitely needed when driving through the rain! Position the model on it's side on the build plate. Support on the wheel side probably isn't necessary.…

Downloads
227
Likes
39
Rating
5
P
Printablesdemmerichs

Gridfinity Ikea 365+ lid container / holder / kitchen organizer / 4x4 version

For more information please refer to the original printable. Onshape modification studio:…

Downloads
224
Likes
51
Rating
0
P
PrintablesSilvian

Xiaomi m365 Apple AirTag Brake Disc Protector (1S, Pro, Pro2, M365)

I Realy Love The model from Pirateln3D an i Realy Love the Apple AirTag. But if you Put the AirTag inside the scooter, it will not work. The metal Blocks the Airtag. If you make a special case for the AirTag, anyone will see it and can…

Downloads
216
Likes
41
Rating
5
P
Printablespeschmae

IKEA 365+ 10.6l Filament Storage with deisccant box

I use Ikea 10.6l containers, to store all my filaments, and this model, helps keeping them in place, and not wobble around. I really liked the original model, but wanted to use some of the desiccant beads I have, to keep the filament dry,…

Downloads
209
Likes
31
Rating
5
P
PrintablesSlavaChrome

Xiaomi Mijia M365 Charging Socket Cap (Added new version)

I have broken my one. So I made it in Fusion 360. Added V2 with increased outer ring for 0.2mm and tab for easier opening Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: 0.2mm Infill: 100…

Downloads
207
Likes
34
Rating
5
P
PrintablesAmiHamster

Xiaomi M365 back fender support for 10 inch tires.

Xiaomi M365 back fender support for 10 inch tires. If you found this useful, please donate what you think it is worth to my https://www.paypal.me/Aminokislota . Help cover the time of design. Thanks, Enjoy! Category: Other

Downloads
205
Likes
25
Rating
5
P
Printablesdeagon

GoolRC BL3650 540 Brushless Motor Reference Model

This is a reference model of a GoolRC BL3650-3500kv 540 Brushless Motor. Hopefully this should save other folk some time with their projects. You can view/download the Fusion 360 project here. https://a360.co/2XXPLjB Category: R/C Vehicles

Downloads
203
Likes
5
Rating
0
P
PrintablesChristoph

U-Lock Mount Xiaomi Scooter M365 / M365 Pro

I've created a mount for a U-Lock for my Xiaomi M365 scooter. The diameter of the lock rod is ~14mm so the hole is 14.5mm. You need 2x M3x10mm Socket Head Screw and 2x M3 Nuts. Print with PETG for flexibility & strength. I've added the…

Downloads
203
Likes
35
Rating
0
P
PrintablesLars

Wall bracket / mount / hanger for Xiaomi M365 Scooter

What's this? This is my custom wallholder for a Xiaomi Mi M365 Scooter, including space for the powersupply. I wanted to create a design which doesn't look too bad, is able to securely hold the scooter and also doesn't need a ton of…

Downloads
203
Likes
37
Rating
5
P
Printablescdsmakestuff

Dust Collection Port UPGRADE for Rigid Table Saw - Model TS3650

If you find this thing useful, please consider sending a tip. Thanks! https://paypal.me/cdsmakestuff Dust Collector upgrade for Rigid Table Saw (model #TS3650) The original dust collector port attachment has only a 2.5" port for a…

Downloads
201
Likes
53
Rating
5
P
PrintablesZodiase

Streamlight TLR-7 Locking Key 1913 style for Sig Sauer P365 XMACRO

None of the locking keys of 1913 style provides a great fit for my Streamlight TLR-7X on my Sig Sauer P365 XMacro. So I made one for myself. If need to deal with real recoil obviously you'd want to print in some durable material. I…

Downloads
196
Likes
15
Rating
5
P
PrintablesAndrew S

IKEA 365+ silverware organizer

Compact organizer for 56 piece IKEA 365+ silverware set. Will fit inside minimum size 245mm drawer width, 235mm drawer depth, 50mm drawer height. Includes single piece STL, and parts A & B to fit on MK3 print beds. Silverware set was…

Downloads
195
Likes
39
Rating
4
P
PrintablesNiSE

SLV6 Sig P365 Insert

It's not perfect but it works. Glock mags kind of work but are smoother with Subtle3D's original Glock inserts. Vice versa with sig mags and my insert. When printing, rotate ~15degrees or until the side closer to the flanges is on the…

Downloads
194
Likes
20
Rating
5
P
PrintablesSteeeve

Xiaomi M365 Security Lock Ring

Because this ring alrady broke twice I created a more stable version myself. In my opinion It is much more stable than the original. The original tapers slightly downwards, which I have not implemented because it is not necessary. Print…

Downloads
190
Likes
18
Rating
5
P
Printablespiotr koryl

Ikea 365+ lid holder / shelf hanger

Based on oryginal work of Simon I have created 5 lids hanger to be fitted under shelfs in the cabinet or storage room. On top there is a lip 19mm (0.74 inch) to be fitted on the back of the shelf. European standard is 18.5 mm so it fits…

Downloads
189
Likes
42
Rating
5
P
PrintablesGary Terry

P365 Stand

Stand to hold a P365 and one magazine

Downloads
186
Likes
33
Rating
5