Search results: 450

Sort order

813 models

1S LiPo Case - Battery Case for 450/550 mAh batteries

My daily use 1s LiPo battery case. Very lightweight at only ~35g per case. It fits any pocket. I can keep track of used and unused Lipos by taking new ones from left to right. It does fit the charger/Lipo-checker from BetaFPV. 450 and 550…

Print approx. €2.44–€2.98 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
641
Likes
67
Rating
5
P
PrintablesAlvomane

Radar Presence Sensor HLK-LD2450 + Wemos D1 Mini V4 ESP8266 Board | Radar Präsenzsensor HLK-LD2450 + Wemos D1 Mini V4 ESP8266 Board

EN: This compact housing is designed for an LD2450 radar sensor with Bluetooth antenna and an ESP8266 Wemos D1 Mini V4. It is based on F-Square's multi sensor design , but is a new development except for the rear ball joint . The radar…

Print approx. €1.61–€1.97 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
438
Likes
50
Rating
0
P
PrintablesPatrik

Gridfinity bins for CR2450 batteries

Gridfinity battery bins for CR2450-batteries. The bins can be stacked. Included bins: A 1x1x4 bin that fits 5 batteries. A 1x2x4 bin that fits 10 batteries. The base box is generated with the Fusion 360 GridfinityGenerator,…

Print approx. €0.83–€1.01 excl. taxPreliminary estimate for one variant

Downloads
321
Likes
21
Rating
5
P
PrintablesAaronOaks

Coin Battery Holders CR1632 CR2032 CR2450 LR44

Coin cell battery holders made to fit in C and D battery dimensions. Designed to add cell batteries to unused C/D slots in a battery organizer. Currently supports: CR1632 CR2032 CR2450 LR44 These are the batteries I use so that's what I…

Print approx. €0.18–€0.22 excl. taxPreliminary estimate for one variant

Downloads
102
Likes
8
Rating
5
P
PrintablesF-Square

MMwave Multi Sensor fixtSE LD2450

This is a redesign based on the idea and software from Ultimate ESPHome DIY Smart Sensor | fixtSE The individual sensors are clipped in neatly and are not loose in the housing. Printed with PLA, 15 % infill. Electronics used: ESP32 30 PIN…

Downloads
1,174
Likes
95
Rating
5
P
Printablesjacus99

Black Diamond Storm 450 LED Headlamp Latch Replacement

I modified the 400 series latch file to match the 450 series. Printed on Ender 3v2 with brim and support touching buildplate, overhang angle 59°. Layer height 0.16mm and infill 100%. I set the supports touching the print and removed it…

Downloads
1,108
Likes
21
Rating
4.5
P
PrintablesCatja

Belt Clip Accessory for Thermacell MR300/450

Due to a lot of flooding, mosquitos seem to have thrived recently. To both take less space in your gear and make it more accessible, this clip allows you to mount your Thermacell mosquito repellent on a backpack, bag or belt! The design…

Downloads
1,044
Likes
110
Rating
4.89
P
PrintablesRustomac

Battery Travel Case (AAA, AA, 14500, 18650, 21700)

Now comes in sizes up to 10! Took inspiration from the Battery Caddy, but in my opinion made it better. Here are my favorite features: Easy one handed battery removal Battery can be put in either way (positive side down or up) - use this…

Downloads
966
Likes
300
Rating
5
P

Smart 450 / ForTwo Kit Card (1:24 scale)

Summary This is a model of a Smart 450 / ForTwo in a kit card style. Some characteristic details can be discovered. After printing, the model can be assembled with the help of integrated connectors. The wheels can be turned, but the car…

Downloads
831
Likes
124
Rating
5

Esp32 C3 mini + LD2450

Descripción: Este soporte ha sido diseñado para montar un ESP32-C3 Mini junto con un sensor LD2450 de manera compacta y eficiente. El diseño incluye una base redonda ajustable con sistema giratorio que permite orientar el sensor con…

Downloads
775
Likes
63
Rating
4.8
P
PrintablesMehmetemin
Downloads
712
Likes
20
Rating
0
P
PrintablesSimon

CR2032 to CR2450 adaptor

I created this battery adaptor for my aqara motion sensor as I had plenty of CR2032 batteries but no CR2450. Version 2 is 4mm thick that fitted perfectly with the motion sensor. I have included the 5mm version for other applications.

Downloads
710
Likes
61
Rating
5
P
Printables3d_printing_bro

f450 drone frame

f450 drone frame (can cut into smaller pieces to fit your printer and then reassemble)

Downloads
676
Likes
16
Rating
0
P
PrintablesC L

AA / 14500 Battery Holder

Printable AA / 14500 Battery Holder: Designed to fit standard contacts measuring 10x9x0.3mm / 0.4x0.35x1/64", this holder features M3 countersunk screw fixation for added convenience. Tailored for DIY projects, it ensures secure storage…

Downloads
670
Likes
46
Rating
5
P
PrintablesTS-Design

CFmoto 450MT (IBEX) Sunshade for speedometer

A sunshade for the CFmoto 450mt speedometer, designed and 3D-printed by me, is a custom accessory created to enhance readability and reduce glare in bright sunlight. In addition to improving visibility, it offers protection against…

Downloads
618
Likes
35
Rating
5
P
Printablesplomdawg

Gridfinity Battery Box: CR2032/CR2016, CR2450, CR1620, and 357/303/SR44/A23/MN21/AAA slots

This is a remix of dhiltonp's battery holder that fits CR2450 and CR1620 batteries

Downloads
568
Likes
79
Rating
4.5
P
PrintablesAnuragD

Gridfinity/Multiboard CR/LR 2032 2450 Bins

Gridfinity bin model that is capable of holding 2032 and 2450 batteries. Combined with Multiboard Gridfinity Adapters it is multiboard compatible as well. I use them to store rechargeable coin cell batteries that I bought from amazon. If…

Downloads
470
Likes
69
Rating
5
P
PrintablesRustam

TTC 450 Two Trees Vacuum

Custom Dust Shoe for 500W 52mm Spindle Benefits: Provides excellent air stream and dust control. Simple and cost-effective to make. Easy to attach and detach thanks to the magnets. Still posible to change bits Materials Needed: 1x M4 x…

Downloads
432
Likes
41
Rating
0
P
Printablesfuspy

BetaFPV Air65 Battery Holder for Bigger Packs (450mah/550mah)

A pluggable battery holder that allows you to fly your BetaFPV Air 65 with bigger battery packs like 450mah / 550mah or any battery pack of 17mm of width. Optionally use a M2 screw to secure it to the frame. Sources available!

Downloads
426
Likes
36
Rating
5
P
PrintablesT88powered

Meteor 65 Pro 450mah Mount

Print in TPU. Fits 1s 450-750 batteries.

Downloads
413
Likes
40
Rating
5
P
Printablesgiobber

Gridfinity CR2450 Battery Holder 1x1x2 (with various tolerances)

I have bought a couple of sonoff zigbee sensor (SONOFF SNZB-02) after some aqara sensor start failing, but differently from the latest they use the CR2450 batteries instead of the more common CR2032 I search printables and thangs for a…

Downloads
407
Likes
34
Rating
5
P
PrintablesWojtek

Shock-absorbing F450 landing gear

Hi, It is my idea for shock-absorbing landing gear for quadcopter with F450 frame. 2 legs on opposite sides should be connected some kind of elastic cord, spring or maybe strong rubber band. It should absorb some of impact of hard…

Downloads
394
Likes
21
Rating
0
P
PrintablesAdventure Mike

Kove 450 Rally Tablet Mount

This is a tablet mount for the Kove 450 Rally (Non pro version) that can be 3D printed. I am mounting a Samsung Tab A7 Lite in a rugged case with it. I printed with 3 walls and Gyroid infill. No supports or brim. I have printed the one in…

Downloads
389
Likes
10
Rating
0
P
PrintablesCatja

Velbon QB-62 (DIN 4503) Quick Release Plate

I needed an extra quick release plate and this seem to have been discontinued, so I drew up and simplified the one provided for my UT-43D II tripod with QHD-53B ball head. This replacement will fit a range of Velbon tripods (mostly of the…

Downloads
384
Likes
24
Rating
5
P
Printablesflbdesign

Rear Brake Disc Guard CRF 250 450

Printing in TPU OR PETG 100% filling Original part: 43330KRNA70ZB

Downloads
382
Likes
38
Rating
0
P
Printablespankomputerek

HP HDD Mounting Screw 450712-001

Used to mount HDD's in various HP Machines. This replaces 'blue' HP Screws. Requires 8MM M3 screw to be put through the middle. Print instructions Unassociated tags: 6005 Pro, DC7800 790, HDD Screw, hp blue, hp screw Category: Computer

Downloads
372
Likes
26
Rating
5
P
PrintablesParanoidAndroid

450 Quad-copter Prop Guard

I had one too many close calls with my quadcopter props, so I decided to design a prop guard. Print Settings Printer: Anet A8 Rafts: Doesn't Matter Supports: Yes Resolution: 0.2 Infill: 20% Notes: Updated the design to limit the weight,…

Downloads
366
Likes
14
Rating
0
P
PrintablesReiner

Clip to arrest an M.2 NVME-SSD in the ASUS PRIME B450M-K II

The mainboard does not seem to come with a Clip to arrest the M.2 Disk Drive in it's NVME slot - in case you need one: here's an option. Lock the holder on the bottom side of the mainboard by adding a regular metal M4 thread nut on top of…

Downloads
362
Likes
18
Rating
5
P
Printablesthall72

Lego Compatible (2450.dat) Plate 3 x 3 without Corner

This model is compatible with the lego system.

Downloads
361
Likes
35
Rating
0

ESP32 38 pin + LD2450

Adjustable Case for ESP32 WROOM (38 pins) + LD2450 This case is designed to provide a functional and aesthetic solution for projects using an ESP32 WROOM (38 pins) and an LD2450 sensor. Key Features: Ventilated design: Hexagonal grille…

Downloads
359
Likes
30
Rating
5
P
PrintablesTom Bz

Asrock B450 Pro4 IO Shield

Asrock B450 Pro4 IO/shield. Category: Electronics

Downloads
355
Likes
7
Rating
5
P
Printablesmintonette

CR2450 Coin Cell Battery Holder

Holder for a single CR2450 coin cell battery. Battery is securely held in place Designed for use with breadboard jumper wires or bare wire Total thickness is 9.1mm Support free print Also check out my CR2032 holder .

Downloads
352
Likes
48
Rating
5
P
Printablesdaclasen

Print-in-Place Case for CR2450 Batteries

This is a Remix of Print-in-Place, Customizable Cases for Button-type Batteries made by fuchsr that will fit 10 CR2450 Coin-Cell Batteries. Please refer to the original model and its detailed documentation regarding Print Settings etc. :)

Downloads
345
Likes
46
Rating
5
P
PrintablesPeggy67

Asrock B450m Pro4 IO Shield

Here is the Asrock B450m Pro4 IO/shield. Enjoy! Category: Electronics

Downloads
341
Likes
13
Rating
5
P
PrintablesBlargedy

HDD Rails For Use With Rosewill RSV-L4500 Drive Bay

I misplaced the rails to mount HDDs into the trays of my server housed in the rosewill RSV-L4500, so I designed these and they fit perfectly. The spacing is standard so there is a good chance they'd fit in other trays. Category: Electronics

Downloads
340
Likes
35
Rating
5
P
PrintablesChris

Corner and side reference blocks for TTC-450 CNC

Just a simple corner and side/edge block for consistent placing of stock on the TTC-450 board. Uses the same M6 bolts as the clamps that follow with the CNC. Print for stiffness - I used PETG with 4 walls and 15% gyroid - and it seems…

Downloads
335
Likes
47
Rating
5
P
Printablesbrunofresco

Smart 450 cup holder

Ive made this cup holder for smart 450 because i could not find one with 2 cup holders i even made a hole so you can put these cheap usb chargers from wish or ebay etc... it is expandable if you want to make your own thing to expand you…

Downloads
322
Likes
17
Rating
5
P
PrintablesAdventure Mike

Kove 450 Rally GPS / Tablet/ CarPlay C7 / GoPro Mount Upper and lower mounting points RAM Ball

This is a tablet mount for the Kove 450 Rally (Non pro version) that can be 3D printed. I am mounting a Samsung Tab A7 Lite in a rugged case with it in the lower position or an AMPS bolt pattern RAM Ball with a Garmin GPS or a Motorcycle…

Downloads
321
Likes
11
Rating
5
P

Smart ForTwo (450) Tow Eye Cap

Caps for the tow eyes on Smart 450s. It MIGHT fit other models, but haven't tested it.

Downloads
317
Likes
18
Rating
0
P
Printablesradekrac

Battery tray / holder AA / AAA / 14500

You can print models while standing. No supports are needed and it is printed nicely using a 0.3 mm layer height.

Downloads
315
Likes
35
Rating
4.67
P
PrintablesTheRealJocki

Haube für Align T-Rex 450 | Canopy

Stützstrukturblocker sind zwingend erforderlich (siehe Bild). Mit der Nase nach unten drucken funktioniert wunderbar. Support blockers are absolutely essential (see picture). Printing with the nose down works wonderfully.

Downloads
315
Likes
13
Rating
0
P
Printablesbaduhai

Asus TUF Gaming B450M Plus IO Shield

IO Shield for the Asus TUF Gaming B450M Plus motherboard, modelled in openscad.

Downloads
313
Likes
7
Rating
5
P
PrintablesCatja

Webbing/Strap Clip Accessory for Thermacell MR300/450

While the original clip is designed to be quick-access and multi-purpose, this variant was made to fit more securely onto the straps of most backpacks. The integrated hook and slight ramp makes it a lot harder to accidentally bump off,…

Downloads
309
Likes
62
Rating
5
P
PrintablesMakerhacks

65mm Makita trim router bracket for Two Trees TTC450 pro

65mm Makita trim router bracket for Two Trees TTC450 pro debranded from original found at Makerworld

Downloads
307
Likes
12
Rating
0
P
PrintablesBen Scholer

CR2450 Coin Cell Battery #Gridfinity

This is a 1x3 Gridfinity bin that holds 15x CR2450 coin cell batteries. If you'd like it in a different size, let me know!

Downloads
300
Likes
19
Rating
0
P
Printables3D-Muc

Motor adapter for CNC milling machine TTC450

An adapter plate is required to mount a 500W spindle on a TTC450 milling machine from TwoTrees. The drill holes in the aluminum holder of the spindle have a distance of 57mm and 20mm On the backside, melt the M6 nuts into the plate using…

Downloads
300
Likes
18
Rating
5
P
PrintablesMorganWG

CR2450 Battery Case

Battery case for 10 CR2450 coin cell batteries. Premade Remix from customizable Print in Place.

Downloads
298
Likes
29
Rating
4.5
P
Printableshadessuk

CR2450 Coin Battery holder

Remix of MilStrata Manufacturing's CR2032 battery holder to hold CR2450 batteries. Thanks to RetroGameRevival for the Fusion360 wrangling.

Downloads
298
Likes
21
Rating
5
P
Printablesthall72
Downloads
293
Likes
51
Rating
5
P
PrintablesTorrid

Gridfinity CR2450

Gridfinity model for 10x CR2450 coin cells

Downloads
293
Likes
63
Rating
0
P
Printableskotana

CFMOTO 450MT(ibex) FRONT ABS sensor cover

CFMOTO 450MT FRONT ABS sensor cover I also uploaded a version with the bottom part cut off for drainage. I haven't checked it yet.

Downloads
283
Likes
26
Rating
0

Case and mount for LD2450 and ESP32 C3 Super Mini

The case is designed to house ESP32 C3 Super mini modules with OR without pins soldered to it. The lid has two variations: Plain and with radar symbol. Features Space for the ESP32 C3 super mini and HLK-LD2450 modules, bluetooth antenna…

Downloads
273
Likes
27
Rating
5
P
PrintablesGeorge?
Downloads
268
Likes
9
Rating
5
P
PrintablesPDG

Two Trees TTC 450 500w plate

Dvě varianty desky pro uchycení 500W vřetene s hliníkovou objímkou na CNC router Two Trees TTC450. Jedna deska pro vložení matic M5 a M6 druhá s tištěnými závity. Two variants of mounting plate to fix 500W spindle with alu collar to TTC…

Downloads
268
Likes
19
Rating
0
P
PrintablesTu Yimin

CFMoto 450MT (IBEX) Mirror Cap

0.1mm layer height. Print without support.

Downloads
263
Likes
17
Rating
0
P
PrintablesRB3

Landing gear legs F450 Q450

Remixed from Greasetattoo original design. Sweeping the other direction and without spikes. Fits my HobbyKing Q450 frame/arms Category: R/C Vehicles

Downloads
255
Likes
12
Rating
0
P
PrintablesOachkatzl

Replacement Spool for Dymo LW 450

Replacement Spool for broken or lost Dymo LW 450 label spools. Prints in 3 Parts. Attach the disc with the hexagonal cutout to the spool - glue may be required - add the labels, then screw on the other disc onto the spool. Available as…

Downloads
249
Likes
21
Rating
5
P
Printablesagent462

Husqvarna Automower 450X Wheel

4 Top and Bottom Layers 20% Infill I printed with Supports and the remove pretty easy from the studs. With these settings these wheels are wider and lighter than the stock wheels. Category: Other

Downloads
248
Likes
24
Rating
4
P
Printablesthall72

Lego Compatible (53450.dat) Minifig Helmet Viking with Nose Protector

This model is compatible with the lego system.

Downloads
244
Likes
41
Rating
5
P
PrintablesFloran

Gridfinity CR2450

Gridfinity holder for CR2450 batteries.

Downloads
237
Likes
54
Rating
5
P
PrintablesExtrutim

Stool 450x280x90mm

The stool measures 450x280x90mm. It is fully printed. You simply print out the same part twice and screw it together. In addition, the rubber pads should be printed from a flex filament to prevent slipping. The stool needs to be printed…

Downloads
229
Likes
77
Rating
5
P
PrintablesKattstryparen

I/O Shield MSI B450M PRO-M2 MAX

IO Shield that fits an MSI B450M PRO-M2 MAX

Downloads
226
Likes
3
Rating
0
P
PrintablesMoksh Mridul

ESP32 LD2450 Case

Small case for the ESP32 and LD2450 with mounts for 2 * 6x3 magnets. Prints without supports. I use this to hang it below my monitor and integrate presence detection in Home Assistant. Designed in OnShape, link here .

Downloads
214
Likes
15
Rating
0
P
PrintablesBrian

Toyota Land Cruiser 80 FJ80/FZJ80/LX450 Delta Shifter Console Double Cup Holder

Double cupholder for the Delta Shifter Console for the Land Cruiser 80 - FJ80/FZJ80/LX450/etc. Fits an energy drink/soda can, and a Hydroflask. Matches the body lines of the console. Bolts in using 3 ¼-20 bolts. No real great way to print…

Downloads
209
Likes
22
Rating
0
P
Printableskjt270000

Gigabyte B450M DS3H IO Shield

Easily printable IO Shield for the Gigabyte B450M DS3H motherboard. Even though I had no issues using this IO Shield printed in PLA I would highly recommend going for filaments with a slightly higher melting temperature than PLA like PETG…

Downloads
204
Likes
5
Rating
0
P
PrintablesAdventure Mike

Kove 450 Rally Air Box Wash Cover

This allows you to remove your air filter and cover the air box of the Kove 450 Rally so you can hose or pressure wash the bike down and not get water into the carb and motor. You need a 256mm x 256mm print bed for this to fit. Do not…

Downloads
203
Likes
1
Rating
5
P
Printablesps915

DJI F450 bottom plate - Naze32 Mount (30x30)

DJI F450 Bottom plate for mounting FC with 30x30mm mounting holes Thanks to kjamimate Please upload a photo of your make. This design is not for commercial use or selling! Du möchtest dieses Teil haben? Schreib einfach: Facebook:…

Downloads
203
Likes
11
Rating
0
P
PrintablesNat

Case for ten 2450 Lithium Coin Batteries

Remixed Case for ten 2450 Lithium Coin Batteries

Downloads
194
Likes
23
Rating
4.8
P
PrintablesBonticus

CFMoto Ibex 450 / 450MT Switch Mount

I needed a convenient place to put the switch for my auxiliary lights. This mount hooks into the front screw and indexes on a slot on the underside of the left controls to stop rotation Including the fusion file in case you want to remix.…

Downloads
193
Likes
26
Rating
5
P
PrintablesJMoto84

RC Helicopter Landing Gear/Skids - 450 Size

I recommend %100 infill for the struts and %5+ for the skid pipes. If you choose to print the skid nuts, I recommend printing them with TPU.

Downloads
193
Likes
13
Rating
0
P
PrintablesSilson07

voditko retezu YAMAHA YZ450F Chain Guard Guide Protector

voditko retezu YAMAHA YZF450 chain Category: Vehicles

Downloads
193
Likes
13
Rating
0
P
PrintablesKrtecany

Spindle holder 65mm for CNC TTC-450

Spindle holder 65mm for CNC TTC-450 PETG

Downloads
192
Likes
12
Rating
0
P
PrintablesJames Wood

LM450 Toy Car

This toy truck is based loosely on the F250? F450? It's pretty fun, and is safe for kids of all ages. The wheels are solid and there's no axle to snap! A smaller version with working print-in-place wheels suitable for older kids…

Downloads
192
Likes
10
Rating
0
P
PrintablesAK

Magcubic HY450 lens cover (lens cap)

I recently bought Magcubic Hy450 and created a simple cover that fits perfectly and protects the lens, so I am sharing it. I hope you like it.

Downloads
189
Likes
10
Rating
0
P
PrintablesChris

Bits and tools holder for TTC-450 CNC

Storage for the tools and bits that come with the TTC-450 CNC along with TwoTrees extra bit set and also any other 3.175 and 6mm bits. Note that the tolerance on the bits holders are tight - I didn't want any chance of the bits falling…

Downloads
188
Likes
35
Rating
4.5
P
Printablesrepairwins

GIGABYTE B450M DS3H Motherboard IO Shield

This is an IO shield for a GIGABYTE B450M DS3H micro ATX motherboard. Tested in PLA, printed at a 0.2mm layer height with 20% grid infill. It is working with no issues. If this model is useful to you, consider checking out my YouTube…

Downloads
186
Likes
3
Rating
5
P
PrintablesAndrew_Sink

Marble Athena Statue, Myron ca. 450 BC - Frankfurt, Germany

One of my favorite sculptures, on display at the Liebieghaus in Frankfurt, Germany. 3D scanned using Polycam, cleaned up in Blender. Printed with Silk PLA and Marble PLA .

Downloads
178
Likes
20
Rating
5
P
PrintablesSpicy3d

AA and 14500 Screw Lid Battery Holder

You can buy these from me here! Consider supporting us on Patreon! These AA and 14500 battery holders with a screw lid are incredibly tough and rigid! Designed for use with protected, unprotected, button-top, and flat-top cells. Print the…

Downloads
178
Likes
28
Rating
5
P
PrintablesSamA

ATX IO Shield for Asus PRIME B450M-A Micro ATX AM4 Motherboard

IO Shield for AMD AM4 Asus PRIME B450M-A Micro ATX Motherboard. Recommend PETG or PCTG.

Downloads
177
Likes
3
Rating
0
P
PrintablesfixtSE

ESP32 C3 + LD2450 Sensor Case (Antenna Fix)

The borders on the cutout part might be a bit thin. I did my best, so consider this a proof of concept . Modifications made using Tinkercad.

Downloads
176
Likes
13
Rating
0

MSI B450M-A [A320M-A] PRO MAX IO SHIELD

Another second-hand case where the seller didn't send the IO shield. I couldn't find a free download anywhere on the internet, so I came up with a nice design using my old designs and another similar MSI model IO shield. Just using…

Downloads
176
Likes
4
Rating
0
P
PrintablesLazerlord

Landing Gear for SK450 Quadcopter Frame (Standard, Long, and Longer)

Never drag your payload again! This set of 3D models are a direct fit for the original landing gear that come with the SK450 from Hobbyking (or elsewhere). They use the same mounting system as the originals, so they require the use of the…

Downloads
176
Likes
3
Rating
0
P
Printablesdm1x

ESP32 C3 Super Mini LD2450 Presence

Case for ESP32 C3 Super Mini and LD2450 with USB C Connector. Backplate snaps in place. added an inlay for the case as the red led shines through white filament 2025/07/04: added ceiling mount, requires 1x m3s threaded bushing

Downloads
174
Likes
24
Rating
0
P
PrintablesKubrick89

14500 to 18650 battery adapter

I designed this to charge a 14500 cell (vapcell H10) with an xtar PB2S charger while traveling. The positive contact is a 16mm M3 screw. Of course charging a liion battery with too much current can be dangerous and since the PB2S doesn't…

Downloads
174
Likes
22
Rating
0
P
PrintablesNorweld

450 Bushmaster Magpul P-Mag Magazine Follower

***This is an updated version of the original which functioned perfectly in testing at the shop with dummy ammo, but failed to lock the magazine back in live fire. The changes are small enough that I've not updated the photos, but the Mk2…

Downloads
170
Likes
7
Rating
0
P
PrintablesBonticus

CFMoto Ibex 450MT Tool Tube

This is a tool tube for the CFMoto (Ibex) 450MT. It has been customized to store the Icon mini ratchet & extension, Harbor Freight 1/4" 8/10/12/13mm sockets, and up to 10 hex bits. Inspiration came from the design on Uncle Wang's Shop.…

Downloads
169
Likes
15
Rating
5

450 mAh adapter for BetaFPV Meteor 65

Light weight remake of the original for better flight time. Print Settings Printer: DMS create Rafts: No Supports: No Resolution: nozzle 0,4mm with layer height 0,2mm Infill: 10% Filament: - PLA Notes: Printed upside down for better…

Downloads
169
Likes
13
Rating
0
P
Printablesma7moodz

Honda CRF250R 2025 Air Filter Cover CRF450

An Air filter cover for the Honda CRF250R, to protect it from water during washing and from dust during long term storage or transportation. Its designed with a long lip in case you wanted to add any sort of sealing material like window…

Downloads
167
Likes
11
Rating
0
P
PrintablesDaminWood

TTC 450 SPINDLE CLAMP + DUST SHOE

3 separate pieces print what you need! :) SPINDLE CLAMP for 65mm trimmer (MAKITA, KATSU, CLONE etc) for CNC Twotrees TTC450 DUST SHOE for ALL 65 mm trimmer Suction ADAPTER (internal diameter 39.2 mm external diameter 43.2 mm) designed to…

Downloads
166
Likes
14
Rating
5
P
PrintablesGrumpy Pirate

TwoTrees TTC-450 / OpenBuilds CNC 65 mm spindle holder adapter - 80x25 hole distance

Plate to attach 65 mm CNC spindle holder from Aliexpress to TTC-450 machine. Designed for holders that use 80x25 mm mounting hole distances. This plate is thick for a reason! You need a specific distance from the router to the machine so…

Downloads
166
Likes
6
Rating
0
P
Printablesbambula

CR2450 Battery Dummy

I was tired of buying the expensive CR2450 batteries for my smart home devices. Now you can use AA/AAA batteries instead! Don't mind the cables – I stripped them to the wrong length and just went with it. 😅

Downloads
165
Likes
15
Rating
0
P
PrintablesFranktion
Downloads
165
Likes
17
Rating
0
P
PrintablesPatrick Hauch

65mm Makita trim router bracket for Two Trees TTC450 pro

65mm Makita trim router bracket for Two Trees TTC450 pro. shorter distance between holding plate and milling cutter center. Overhangs have been removed as far as possible I printed the adapter from PETG. Layer height: 0.2mm Number of…

Downloads
164
Likes
12
Rating
5
P
PrintablesRazzer09

LD2450 mmWave Multi Sensor with Plastic Screws

This is a remix of the presence sensor originally designed by @FSquare_1622667. I made a few tweaks to suit my needs: Replaced the original screws and inserts with plastic screws (I didn’t have the metal ones at home). Thinned the walls…

Downloads
163
Likes
6
Rating
0
P
PrintablesTobias

Garmin Oregon 450 / 450t Power Button

Ein einfacher Powerbutton für Garmin Oregon 450. Er muss mit TPU oder Flex Material gedruckt und dannach eingeklebt werden. A simple power button for Garmin Oregon 450. It has to be printed with TPU or Flex material and then glued in…

Downloads
163
Likes
9
Rating
5
P
PrintablesMFM Industry

Guarda Lama CF Moto 450 MT

Guarda Lama CF Moto 450 MT

Downloads
162
Likes
23
Rating
0
P
PrintablesMachvolum

F450 type quadcopter top with APM Dampener Mount and taller arms

I liked the design, but the mount for the apm was a little flimsy and a little small. So I took two items and mated them together. I also made the top plate 3mm instead of the original 2mm to add additional strength. There is also a file…

Downloads
162
Likes
13
Rating
0
P
PrintablesJoshB

CEN Racing F450 Super Duty Underbody Protection

Underbody protection to keep debris out of the cab, and to protect the lower edges of the body. Optional running boards and front fenders attach to the side plates. Update (May 27 2021): Added two smaller files for those with smaller…

Downloads
162
Likes
16
Rating
0
P
PrintablesMr. Sullivan

4500 Series Carburetor (Dominator) Base Riser and Gasket 1-1/8 in. Tall

This model is a 1-1/8 in. riser for use under the base of a Holley 4500 Series Dominator Carb. Designed for use with the 1050cfm model. I printed the file with Nylon-CF with 25 percent gyroid infill 0.2mm layer lines and 4 walls. To…

Downloads
159
Likes
17
Rating
0
P
PrintablesF. Mandel

DJI F450 Canopy - FC Protection

Canopy - FC Protection. Can be zip tied to the fram. The screw heads keep it in place

Downloads
157
Likes
12
Rating
0