Backpack Strap Adjuster (25mm)
An adjuster for nylon straps commonly found on backpacks. This one fits 25mm wide straps.
Print approx. €0.20–€0.25 excl. taxPreliminary estimate for PETGSource material: PET
- Downloads
- 1,533
- Likes
- 144
- Rating
- 5
9,178 models
An adjuster for nylon straps commonly found on backpacks. This one fits 25mm wide straps.
Print approx. €0.20–€0.25 excl. taxPreliminary estimate for PETGSource material: PET
Radiuslehre für Außen- und Innenradius 1-25mm Es ist ein Remix von "@mibla" aber ich habe sämtliche Maße verändert. Geändert/hinzugefügt wurde: von M5 Senkkopfschraube auf M4 Zylinderschraube 30mm mit passender Mutter Innenradius 21-25mm…
Print approx. €1.26–€1.54 excl. taxPreliminary estimate for one variant
So this is a thin and minimal protection case for Apple Watch Series 7 45mm. Prints in 14m and uses only 1,4g of material.
Print approx. €0.16–€0.19 excl. taxPreliminary estimate for one variant
This mount is designed for standard MOLLE webbing, laser-cut MOLLE , and standard 25mm webbing used on most backpacks. This includes non military packs! Furthermore I used the official apple design guidelines to get the curvature of the…
Print approx. €0.08–€0.09 excl. taxPreliminary estimate for PETGSource material: PET
With this slip-on tool you can easily sharpen you drills. it will slip-on the protector (1mm with) of your angle grinder. I printed it with PLA but i think it is better to print it with ABS. Use brim and full supports only on the bed…
Print approx. €3.70–€4.52 excl. taxPreliminary estimate for one variant
GoPro arm extender - straight - 25mm, 50mm, 100mm
Print approx. €0.43–€0.53 excl. taxPreliminary estimate for one variant
I wanted to have a more narrow version to install 5 spools beside each other in the available space. Since the printer had enough printing space to produce two stands at once I decided to handle pairs with a double stand, causing the…
Print approx. €0.29–€0.35 excl. taxPreliminary estimate for PETGSource material: PET
Planter for succulent with plastic plant pot (diameter 85mm, height 70mm) I printed on a PRUSA XL: Filament: Filalab Fiber Filament Wood 0,4 mm nozzle 0,20 mm layer 2 perimeters 10% gyroid infill Top and Bottom fill pattern - Concentric…
Print approx. €6.04–€7.38 excl. taxPreliminary estimate for one variant
Das ist der Nachfolger (v2) meiner Radiuslehre 01-14mm. Das Problem dass keine 90 Grad Ecken gemessen werden konnten, wurde hier behoben. Die Daten sind für den Druck mit einer .4mm Düse und einer Schichthöhe von .2mm optimiert.
Print approx. €0.60–€0.73 excl. taxPreliminary estimate for one variant
Hier habe ich Slider u.a. für 2-Wege-Plastikreißverschlüsse 5mm konstruiert. Der Slider besteht jeweils aus 3 Teilen, welche nachher zusammengefügt werden. Der Bügel wird zuerst hinten eingehakt und dann vorsichtig nach unten gedrückt -…
Print approx. €4.69–€5.73 excl. taxPreliminary estimate for one variant
I created this because I know that this is a part that I will need in the future for my airsoft attachments. Print it with 0.2mm layer height, 10mm brim and supports enabled. Print this from the side that is touching the gun when attached…
Print approx. €0.62–€0.75 excl. taxPreliminary estimate for one variant
Laptophalterung um den Laptop stehend am Schreibtisch zu positionieren. Das Hauptmodell habe ich von FizulNizam | Printables.com Wollte noch etwas Material und Zeit vom Ausdruck sparen und vielleicht noch etwas an 3D gewinnen. Breite…
Print approx. €5.37–€6.56 excl. taxPreliminary estimate for one variant
Remix of the original Small Sanding Block that uses M4x20mm screws. This version requires M4x25mm screws so it is a bit higher (duh). Knob and Cap are unchanged in this remix. For detailed description please refer to the original model.…
Print approx. €2.15–€2.62 excl. taxPreliminary estimate for PETGSource material: PET
[EN] You can find the description in English below [ES] Escuadras de Ensamble en X y T para Melamina de 15mm Estas escuadras de ensamble en X y T son la solución perfecta para quienes trabajan con melamina de 15mm, proporcionando una…
Print approx. €5.43–€6.64 excl. taxPreliminary estimate for one variant
I created this because I know that this is a part that I will need in the future for my airsoft attachments. Print it with 0.2mm layer height, 10mm brim and supports enabled. Print this from the side that is touching the gun when attached…
Print approx. €0.35–€0.43 excl. taxPreliminary estimate for one variant
We have a Juwel 70 aquarium in my kid's room. The original air diffuser, included by the Juwel BioFlow One Filter/Heater combo works fine, the water current in the fish tank was so strong, that the fishes acted irritated. Also, the tuning…
Print approx. €4.72–€5.77 excl. taxPreliminary estimate for PETGSource material: PET
We recently upgraded an old laptop and wanted to have a storage to keep the two old RAM cards together. RAMs work best when paired with ones having the same specs. So we wanted to have them in the same container, and separate from other…
Print approx. €0.49–€0.59 excl. taxPreliminary estimate for one variant
The wall clamp provides fixation for 35mm pipes or corrugated hoses. Designed with a 34.7mm clamping function and 11mm height. Hole for countersunk M5 Screw. Printed on my Prusa with: 0.3mm layer height, 50% infill 0.4mm nozzle.…
Print approx. €0.46–€0.56 excl. taxPreliminary estimate for one variant
Air Hose Adapter for 125mm to 180mm, outer diameter, no support required german version below Dieser Abluftadapter hat an der kleinen Seite die Möglichkeit einen 125mm Abluftschlauch anzuschließen, auf der anderen Seite ist der äußere…
Print approx. €6.69–€8.17 excl. taxPreliminary estimate for one variant
User Gabe's excellent original design seemed a little short, so I increased the height of the platform 25mm using Blender. The added height makes it a little easier to see items/edges of prints on the closest part of the print bed. It…
Print approx. €3.18–€3.89 excl. taxPreliminary estimate for one variant
I got tired of fiddling with filament clips that require you to have three hands - One to hold the filament, another to hold the roll, and a third to put the clip on! So I made a tension clip that fits onto the side of the spool and then…
Print approx. €0.11–€0.13 excl. taxPreliminary estimate for one variant
Tablecloth clip A simple tablecloth clip for tables with a plate thickness of 18-25mm. When using PETG, suitable for indoor and outdoor use. Print instructions - material: PETG - infill: 100% - layer height: 0.2 mm
Print approx. €0.09–€0.11 excl. taxPreliminary estimate for PETGSource material: PET
Here's my design of a Clearance and Tolerance 3D Printer Gauge . Drawn in Fusion 360 Print instructions ¤ Use .3mf or .gcode for presliced settings. ¤ Print in Prusament PETG Galaxy Black and Prusament PETG Signal White ¤ Use Prusament…
Print approx. €1.63–€2.00 excl. taxPreliminary estimate for PETGSource material: PET
A replacement corner piece for a fly screen with an aluminum frame 25mm. It is a press fit in the aluminum frame. I printed the corners with PLA. Support is needed, which can be easily cut off with a sharp knife. Interface pattern…
Print approx. €0.61–€0.74 excl. taxPreliminary estimate for one variant
This is curtain holder ring, which easily hold curtain. This is modified models from bos's ( https://www.printables.com/model/358585-curtain-holder-ring-90mm/files ). The original one is larger diameter for curtains in my house. Then, I…
Print approx. €0.63–€0.77 excl. taxPreliminary estimate for one variant
Print Settings: -PLA +/PETG -80% Infill -Mostly <1.5 grams per item I used Ender 3 V2 to print this item. Thank you
Print approx. €0.14–€0.17 excl. taxPreliminary estimate for one variant
This is a set of infill swatches to match the “35mm slide”-style filament swatches created by George. They have the same external dimensions, and the filament “window” is roughly the same dimensions and orientation as the sample image on…
Print approx. €0.32–€0.39 excl. taxPreliminary estimate for one variant
Here is my design for an inside corners bracket to secure 2 or more HUB 75 Matrix panels together. My panels came from Adafruit - they are from Waveshare I believe - Mine are 64x64 but they probably work on the 32 x 64 as well. I used 2…
Print approx. €3.11–€3.81 excl. taxPreliminary estimate for PETGSource material: PET
This is the version without the embossing visible in the photos. More versions are available to my patrons .
Print approx. €4.70–€5.74 excl. taxPreliminary estimate for one variant
I wanted to store my film somewhat organised. I couldn't find a holder design I liked, so I made my own. Printed with PLA 0.2mm. You can edit the OpenSCAD file to change the layout and size. https://ko-fi.com/spacehuhn
Print approx. €3.92–€4.79 excl. taxPreliminary estimate for one variant
This is the “Rugged Box v3 60” for 35mm Slide Filament Samples (and also fitting my remixed 35mm Slide Infill Samples ) cut down to fit the bed of a Prusa Mini/+ or other smaller printer. There is also the option of a windowed top, so you…
Print approx. €0.39–€0.48 excl. taxPreliminary estimate for one variant
25mm industrial bases, that fit my Miniature Painting Handle and Base Set Miniature Painting Handle and Base Set https://www.thingiverse.com/thing:6247736 Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: Yes…
Print approx. €0.47–€0.57 excl. taxPreliminary estimate for one variant
Improve your golf putting game with an adjustable putting gate (50 - 70mm) that can be used on a practice green or carpeting. Holes in each side can be used with golf tees to secure to the ground or though carpeting. Usage Set width size…
Print approx. €1.32–€1.62 excl. taxPreliminary estimate for PETGSource material: PET
Luftgitter für Belüftung 115mm --------------- ENGLISH -------------- Air grid ventilation 115mm Print Settings: Printer : Anycubic i3 Mega S Print time : 5 h 20 min. Filament : PLA or ABS Resolution: 0.2 mm Infill: 15% Brim : No Rafts:…
Print approx. €4.71–€5.76 excl. taxPreliminary estimate for one variant
This only contains the gcode for doing a true multi-colour print on a Prusa Mini+ "0_0.2mm_PLA,PLA_MINI_1h30m.gcode" does a true multi-colour print for the first two layers. Start with the filament for the main body colour loaded. Then…
Print approx. €0.66–€0.80 excl. taxPreliminary estimate for one variant
Aerosol can straw clip for 2.15mm straws. Print with a 0.4mm nozzle.
Print approx. €0.59–€0.72 excl. taxPreliminary estimate for PETGSource material: PET
The radius measuring parts are the same. Only the covers are newly created with FreeCAD. For these covers, you need: 2 x M4 35 mm Phillips pan-head screw 2 x M4 nut
Print approx. €1.73–€2.11 excl. taxPreliminary estimate for PETGSource material: PET
Hoffman style spacer for beehive frames | Mezerník pro úpravu jednoduchého včelařského rámku na hoffmanův
Print approx. €0.51–€0.62 excl. taxPreliminary estimate for PETGSource material: PET
Cable Wire Zip ties 3.6mm Width Mount Hole Nail Screw Dimension 2mm, 2.5mm, 3,mm, 3.5mm, 4mm & 5mm Heavy Duty No problem…… Filament PLA+ or PETG or ABS or ASA Recommender ASA Support: Everywhere Thank you ;-)
Print approx. €0.13–€0.16 excl. taxPreliminary estimate for one variant
Geeetech spool adapter 75mm to 608ZZ bearing. Adapter has a diameter of 76mm for a tight fit. Print it with PETG so it is flexibel enough.
Print approx. €2.04–€2.49 excl. taxPreliminary estimate for PETGSource material: PET
I utilized a portion of BradleyM1's Keychron Knob Riser to make a standalone 15mm tall knob, for my Keychron K17 Max. It fits other keyboard models with a 6mm diameter stem. Top of knob sits about 16.6mm from top of case, a few mm higher…
Print approx. €0.18–€0.23 excl. taxPreliminary estimate for one variant
recommended printing on ASA filament, of course PLA or PETG is fine
Print approx. €0.19–€0.23 excl. taxPreliminary estimate for one variant
Please like and download my model. Visit my page to get more 3d model. Thank all, Have a good day. The Bitexco building is 65.5mm tall, equivalent to a scale of 1/4000 in real life, and can be used for architectural projects or dioramas.
Print approx. €0.44–€0.54 excl. taxPreliminary estimate for PETGSource material: PET
I needed a few hooks for an additional rod in the wardrobe, this one is for 20mm / 25mm rods. Simply enlarge or reduce without any problems. The hooks are now of the size that they cannot be moved so easily, scaled to 102% in the Prusa…
Print approx. €0.18–€0.22 excl. taxPreliminary estimate for PETGSource material: PET
dog food can lid 75mm Dog food cans come in different sizes. Lids are available in 76 mm, but they don't fit. Unfortunately, the can was 75 mm! So, design it yourself, print it, try it until it fits. Weighing only 7.5 g, the lid uses…
Print approx. €0.49–€0.60 excl. taxPreliminary estimate for PETGSource material: PET
Parts tray to keep small parts organized
Print approx. €8.43–€10.31 excl. taxPreliminary estimate for one variant
A 25mm diameter button in metric units. Flat face with a dish shaped ridge.
Print approx. €0.08–€0.10 excl. taxPreliminary estimate for one variant
A 25mm diameter button in metric units. Flat face with a filleted rounded square shape and a wide ridge.
Print approx. €0.11–€0.13 excl. taxPreliminary estimate for PETGSource material: PET
A 25mm diameter button in metric units. Flat face with a filleted edge and a wide ridge.
Print approx. €0.08–€0.10 excl. taxPreliminary estimate for one variant
J'ai créer ces tampons en TPU pour remplacer ceux usées de mon escabeau qui est en tube de 25mm.
Print approx. €1.01–€1.23 excl. taxPreliminary estimate for one variant
Buy some 15mm OD copper pipe and cut this at 27cm Hammer in these ends, ensure the angle is the same! (use plastic hammer) And it fits just like the original short bars. I recommend to print with HT-PET, solid, with 3 perimeters.
Print approx. €0.51–€0.62 excl. taxPreliminary estimate for PETGSource material: PET
This is to fit the: Kodak 35 mm U-Core 2 inch / 52mm film core/spool and 400ft to 100ft Bulk Film Respooler by @MaslovyRohlik originally the [Thingiverse] 400ft to 100ft Bulk Film Respooler by @broken_perfectionist This is a handy device…
Print approx. €0.46–€0.56 excl. taxPreliminary estimate for one variant
This is a lid of the small rectangular Vtopmart glass container. Sadly those are not available as a spare part from the OEM, so we made one. The seal from the broken lid fits and it is just as watertight as the original. You can print the…
Print approx. €1.33–€1.62 excl. taxPreliminary estimate for one variant
Die Tablettenbox bietet Platz für mehrere Tabletten. Dank ihrer abgerundeten Form kann sie ohne zu stören in der Hosentasche getragen werden. Die Gewindeverbindung sorgt für einen guten Verschluss und ist mit nur einer Umdrehung zu…
Print approx. €0.65–€0.80 excl. taxPreliminary estimate for PETGSource material: PET
Remix of Wera Gridfinity Screwdriver Rack 1x2 that includes larger holes (14.55mm max diameter) for other screwdriver models (specifically, in my case, a set of Teckman T3 - T5 torx drivers).
Print approx. €3.29–€4.02 excl. taxPreliminary estimate for one variant
This is a lenshood for an Olympus M.Zuiko 25mm lens or any lens were a LH-49B lenshood would fit on. This give you the squared look of a leica or fuji camera, for a fraction of the cost ;)
Print approx. €0.33–€0.40 excl. taxPreliminary estimate for one variant
Hi, I decided to convert my Blackstar Core ID.3 to use a 12v barrel jack with the smaller 2.1mm inner diameter. The input provided is a 5.5mm x 2.5mm, but the smaller one seems more common and is what came with the battery pack I bought.…
Print approx. €0.34–€0.41 excl. taxPreliminary estimate for one variant
Introduction This model is part of my Solar System Lithophane Lamp Series. As of now, all planets and several moons of the solar system are available as lithophane lamps in five different sizes: ⌀295mm , ⌀205mm (this upload), ⌀150mm ,…
Secures LEDs against being pushed back in to the mount, since it features little latches. Fits in an 8mm hole with at least 1.5mm material thickness Printing is best be done with a 0.4nozzle and layerhights from 0.12-0.2mm. No support…
Many different sized funnels. With the top diameter starting at 25mm and going up to 200mm. Each with multiple appropriately sized bottom/nozzle sizes. The models are grouped by the top diameter size. If any of these don't suit you you…
This is a Heat Insert Mod of the great DIN Rail Bracket from Fabian. M3 Heat Inserts up to 5.7mm can be used. If you want to create your own mounts for it - hole distance is 52.5mm. I will also publish several mounts I created.…
Mostly Printed CNC Primo Version MPCNC "F" 25mm Version Released on 7/23/20 Questions are best asked here, https://forum.v1engineering.com/ 8/15/20 - Truck V1 (& Mirrored Truck) - added 1mm thickness to stepper mount. 8/16/20 - Error in…
01 - Summary A simple reusable tie fastener to organise cables and other long objects. It features 1-12 holes with lengths 40-205mm for great versatility. Unlike other cable ties, this puts ease of use first, with a simple fastening and…
A simple, easy-to-print, retro-style 35mm film holder for DSLR scanning or negative viewing. The included registration posts make it easy to align when gluing and assembling. Please post your make. Enjoy File "35mm_Film_Holder_NG.stl" has…
This design supports material from 5-15mm thickness. The clamps are more easy to handle than angles with seperate clamps, but will only support joints of equal thickness material. Concept is based on idea of takuwoodcraft / TWCDesign.…
Collection of Gridfinity basic cups height 3 (25mm), over 2500 STLs all common variations. Using the Gridfinity Extended OpenSCAD script . I have generated STLs for bins of all common configurations (over 2500 configurations per height).…
I have investigated many different ways of adapting the CAMLOCK system to other vacuum hose dimensions, but the variety of diameters and hose types seems to be infinite. Sadly there is no one size fits all approach. In the CAMLOCK system,…
I printed this for my son, beautiful print, but wanted one for myself. I made it 15mm longer so it fit my hand better. Make sure to paint the seam on the blade down at the bottom where you won't see it. 👍
I printed a set of these but found them to not fit my Razer Blade laptop and also being a bit large. The angle the laptop gets with the original stand made it uncomfortable using the keyboard, I just wanted a very slight lift to help with…
This attachment enables a spray can to spray a stream of Oil/Wax or Brake-fluid directly and only to the chain (i.e. avoiding overspray onto bike frame , tires and disk rotors) , less mess, less waste and more time to ride…….. I am blown…
After trying several different designs I like this type of clip the best because it has a low profile, uses little filament and is fast to print. Since there doesn't seem to be such a clip for DAS FILAMENT ( https://www.dasfilament.de/ )…
Mostly Printed CNC Primo Version MPCNC "C" 23.5mm Version Released on 8/29/20 Questions are best asked here, https://forum.v1e.com/ Print instructions https://docs.v1e.com/mpcnc/PParts/
Single 35mm DIN mount for Shelly EM power meter
I needed a monitor arm to attach to my Raising Electronics server rack frame and couldn't find anything purpose built so I hope this helps someone looking to do the same. I started with this make from stunner2211 over at thingiverse and…
Ready for MMU. Print the partitions on their side with 0 top and bottom layers. I used honeycomb infill.
Hey! Created a simple 3D model to help with the noise from 25mm stock fan. Swapped it for a quieter 40mm one. Just so you know, I'm not a 3D expert - just trying to make things less noisy. If you're good at 3D modelling and want to…
Printable accessory developed specifically to improve the assembly experience for the Original Prusa Enclosure. To assemble this print you need an 2.5mm Allen key (part of the package) and the following printed parts: Allen key handle…
These strong, reusable plant stakes are designed to help support stems and keep plants upright as they grow. Whether you're dealing with seedlings or mature plants starting to lean under their own weight, these supports offer a clean,…
This is a cup holder for Fiat Ducato to hang on the center glove box. It is for 75mm (to 58mm) cups that are too big for the normal cup holder. It should fit Fiat Ducato, Citroën Jumper, and Peugeot Boxer 2006-2013, but possibly other…
Introducing the Croc Clip —a fun and functional filament clip with bite! Designed in the shape of a little crocodile, this clip snaps securely onto your filament spool, keeping it neatly in place and preventing tangles or unwinding. 3mm…
I have an insider corner above my workbench where I am putting up a multiboard. I couldn't make any of the premade brackets work for my needs, so I made my own. These are working for me and can be seen in the attached images Updated…
This can be a tight fit, rotate so you can get to the collet lock if you do not use two wrenches. The tool also needs to be angled either direction so the corner of the top housing does not hit the bolt heads. No calculator offset needed,…
Mewtwo and Mew scaled to 35mm, presupported files included
Update: Now featuring multiple metric sizes, with imperial versions linked below. This is a replacement 5mm shelf support pin featuring an L-shaped bracket design. Unlike standard cylindrical pegs, the flat bracket distributes the…
Heizkörper Entlüftungs-Schlüssel Da hier viele bei den Kommentaren angegeben haben das sie mit 110% gedruckt haben, hab ich nochmal nachgemessen. Die 4kt Vertiefung hat genau 5,0 x 5,0 mm Eine Neuauflage mit 110% (5,5 mm) findet Ihr hier:…
Print-in-Place 1.75mm Filament Splicer Guide - no respoling required! Filament Prusament ASA with 0.2mm layer with variable layer (smallest possible layer) for the filament guiding features hinges and latch. Proof of concept - Not yet…
Designing simple spacers is an often recurring simple task that is not very exciting. It is much more fun to write a program does my work for me, so that is what I did. My program has generated .stl files for all spacers that anyone will…
Introduction This is a functional print that helps you finally digitize those 35mm film negatives - old family photos and recently developed rolls alike. The main component consists of a frame with a print in place mechanism for advancing…
A special feature of this stand card is the absence of mechanical hinges. They are replaced by a composite of two types of plastic. This allowed us to achieve the minimum thickness and print time (30 minutes). The stand is convenient to…
This is a multi-purpose clamp with a maximum opening of 25mm or one inch. Use cases Typical use cases are to hold things together, like I do on the bottom of my motorbike tarpaulin. They are also useful for hobbyists, makers, RC plane…
This a generic mount for a 35mm top hat rail. This mount clamp snaps quite tight at the top hat rail and has a 10mm flat mounting base on top. You can easily attach different mounting cages to this base plate with glue. Update: I uploaded…
I experimented with making a segmented flexible hose. Took a few tries until I got the tolerances right. But it works great now. Print instructions Category: Machine Tools Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No…
A simple printable tool to better empty (metal) tubes like tomato paste, mustard and co. Version 2.0 (2023-11-21): I have recreated the " Tubeentleerer " by Boomi and slightly reworked the design, so the dimensions are very similar to the…
A set of simple tried and tested pipe insulation cutting templates. I was sick of doing it by eye and then noticed people selling similar online but they were either overpriced or a bit "janky". I spent a fair bit of time sorting these…
Customized version of https://www.thingiverse.com/thing:193647 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=193647 Instructions Using the following options: type = bolt head_type = hex drive_type =…
For model makers (dioramas) see the exciting addition of accessories below This is the standard 155mm howitzer shell in use by the US army since around WWI. This model was inspired by @sbeecroft's models on Thingiverse; this is not a…
The Donut Espresso Shaker is an espresso shaker that enables even distribution when preparing espresso for a wide range of portafilter sizes. What makes the Donut Shaker special is that it achieves this result with any portafilter size…
An adapted version of the vectored intake wheels to use in FTC with 5mm hex rev shaft. Use of m4 inserts with heat set inserts to pack them close together.
The rugged box measures 110mm x 220mm x 75mm, providing a durable and practical storage solution. Designed with integrated slots for metric nuts, it ensures secure assembly and enhanced functionality. Its compact size and sturdy…
3pc vacuum nozzle and holder. Fits 35mm vacuumhose. Perfect for car or couch cleaning. Printed with no supports on the nozzles. The stand are mounted by two countersunc screws or dubblesided tape. Feedback is much appreciated!