Search results: adf

Sort order

214 models

Articulated mount Ikea Tradfri motion sensor (PIR E1525/E1745)

The 3D printed mount is designed to perfectly fit the Ikea Tradfri motion sensor, ensuring a snug and secure fit. Whether you prefer a more permanent installation with screws or a flexible and removable option with magnet, this 3D printed…

Downloads
316
Likes
42
Rating
5
P
Printables-INSOMNIAC-

QaDFC - Quick and Dirty Filament Cleaner

Description: Yet another simple Filament cleaner, that snaps together with four 6x3mm magnets. Nothing special, but i got somewhat annoyed by my current hinged one, when switching through filaments in quick succession. Of course i could…

Downloads
250
Likes
59
Rating
5
P
PrintablesWegBier

Tradfri On/Off Switch Skadis Mount

An IKEA Skadis mount for the Tradfri On/Off Switches. The base plate from the Tradfri switch is screwed onto the Skadis holder with two M3 nuts and bolts, I used M3x6. You could also just use the provided double-sided tape to fix the base…

Downloads
220
Likes
68
Rating
4.67
P
PrintablesBuildComics

3M Adflo to Milwaukee M12 Battery Adapter

Can be used to run 3M adflo from Milwaukee M12 battery. To assemble you need to solder some wires and crimp some spade connectors. Use Large 6.3mm spade connectors for the Milwaukee battery side Use small 2.8mm male spade connectors for…

Downloads
217
Likes
15
Rating
0
P
Printablesices

IKEA Tradfri Motion Sensor Corner Mount

🇬🇧 IKEA Tradfri Motion Sensor Corner Mount A holder to mount an IKEA Tradfri motion sensor in a corner. The sensor is simply plugged onto the holder. The holder can be glued into the corner, but also has a hole for a countersunk screw. 🇩🇪…

Downloads
214
Likes
24
Rating
5

IKEA Tradfri Shortcut Button Holder

Print Settings: PLA 0.2 0.4 Nozzle no supports

Downloads
111
Likes
7
Rating
4.5
P
PrintablesTommi

Tradfri switch ON/OFF

You can donate here: https://www.paypal.com/donate/?hosted_button_id=BTTC6BR69RRAL

Downloads
105
Likes
11
Rating
5
P
PrintablesTomas Rendek

Ikea tradfri button cover - Doorbell

Doorbell cover for Ikea home smart shortcut button. https://www.ikea.com/cz/cs/p/tradfri-rychly-vypinac-bila-40467765/ Print with supports, then carefully remove it. Sliced for two colors (black last 4 layers).

Downloads
76
Likes
11
Rating
5
P
Printablesivosak

Tradfri ON-OFF Switch cover

I have bunch of TRÅDFRI on-off switches at home and because of children it become mixing so I was unable to recognize which switch drive what, so decided to make custom enclosure. Use thin flared screwdriver to remove original top case…

Downloads
76
Likes
15
Rating
5
P
PrintablesDJ

Ikea Tradfri switch holder

This model holds your Ikea Tradfri switch in place. First I created 1 model with an angular exterior (which in my case holds the switch even better). For other folks I also created ones with a flat top. Tradfri-swtich-holder 7 mm height…

Downloads
65
Likes
11
Rating
5
P
PrintablesMartinPP

lightswitch cover for TRADFRI IKEA smarthome switches and buttons

lightswitch cover for TRADFRI IKEA smarthome switches and buttons. Stop your familymembers and friends from turning off your smart lights the wrong way! No tools required!

Downloads
64
Likes
16
Rating
0
P
PrintablesMichal

TRADFRI Remote mount

min thickness is 2mm magnet: d6mm x 2mm

Downloads
61
Likes
8
Rating
5
P
PrintablesTheCyberfreak

Tradfri Lightswitch Mount

Unfortunately, the switch fell out again and again with the original model. That's why in this version there is an opening for a magnet at the back. In addition, the switch is located deeper in the housing so that it cannot fall out so…

Downloads
35
Likes
9
Rating
0
P
PrintablesaRGiRob

ikea tradfri remote wall mount 503

a support for the ikea tradfri remote control that fits under the European standard plate 503 vertical and horizontal mount versions available. use the original ikea adhesive and support that you will have to join to the printed support…

Downloads
34
Likes
4
Rating
0
P
PrintablesshakeNbake08

IKEA Tradfri Wireless Dimmer Switch Mount

This fits over an existing mains light switch to allow a Tradfri Dimmer to mount in place Light switch can still be accessed when the remote is removed A 6x2mm magnet is pressed into the back of the mount to hold the remote in place.…

Downloads
33
Likes
4
Rating
0
P
PrintablesSkeleton Dan

Eren Jaeger (Steadfast Resolve - Titan Form) from Attack on Titan

Source: https://www.models-resource.com/mobile/thesevendeadlysinsgrandcross/model/66942/

Downloads
376
Likes
29
Rating
0
P
Printablesdeepbluehue

ADF-01 Falken

1:100 model of a ADF-01 Falken from Ace Combat

Downloads
356
Likes
19
Rating
5
P
Printableshackawayjr

3M Adflo Adapter for 3M Bayonet Filters

DISCLAMER: You are solely responsible for your health and safety by choosing to use this non-approved adapter. Adapter to allow 3M bayonet filters to be used with 3M Adflo blower. Replaces the stock filter and filter cover and secures…

Downloads
351
Likes
31
Rating
0
P
Printableshackawayjr

3M Adflo to Milwaukee M12 Battery Adapter

Disclaimer: Lithium batteries are dangerous and can explode/catch fire if used improperly. You are solely responsible for your own safety if you decide to make this adapter. I am not an electrical engineer so I am not going to go in-depth…

Downloads
348
Likes
40
Rating
0
P
PrintablesStina
Downloads
322
Likes
43
Rating
4.92
P
Printableskili0

Black Myth: Wukong Dreadfire Yaksha Mask

在《黑神话:悟空》中,“恐怖之火夜叉面具”是一个具有重要背景和意义的深刻象征性物品 恶意和挑战的象征:Dreadfire Yaksha 面具可能代表游戏中的邪恶力量或挑战。夜叉在传统文化中经常被视为凶猛的恶魔或守护者,而这个面具可能象征着与这种强大力量的对抗或需要战胜。 角色和背景洞察:蒙版可能会揭示游戏中某些角色的背景或故事情节的各个方面。它可能与敌对力量或历史背景相关联,反映人物之间的冲突和关系。 文化和神话元素:…

Downloads
292
Likes
52
Rating
5
P
PrintablesCaptainBobSim

Flight Simulator ADF instrument

The Printables version will not be updated. The best place to get it is here: https://captainbobsim.com/product/the-cessna-172-project-files/?customize_changeset_uuid= Kit can be purchased here:…

Downloads
280
Likes
27
Rating
0
P
PrintablesTommy Brodd

M3 ADFLO / Speedglas Milwaukee M12 adapter

Milwaukee 12V M12 adapter för Milwaukee M12 12-volts litiumjonbatteri Till m3 adflo / Speedglas

Downloads
212
Likes
12
Rating
0
P
PrintablesKiriz_43

ADF-11F Kit Card

ADF-11F Raven A large fighter created by North Osea Gründer Industries. The Erusean Air and Space Administration (EASA) planned to create a UAV-model and a few manned models; this aircraft is the latter. What makes the ADF-11F stand out…

Downloads
172
Likes
69
Rating
4
P
PrintablesKiriz_43

ADFX-01 Kit Card

ADFX-01 Morgan A fighter developed during the Belkan War. It started off as an experimental aircraft created by the North Osea Gründer Industries, but was later completed by the Allied Forces headed by the Osean Federation after the…

Downloads
164
Likes
68
Rating
0
P
PrintablesDeltaX_F

Armored Cruiser HMS Steadfast [Fictional]

1:1000 Scale I designed this cool little ship as a small side project for fun, and I'm really happy with how it looks. I'm planning on designing more ships, which will come soon, so look out for those. This guy is inspired by several…

Downloads
159
Likes
17
Rating
0
P
PrintablesFluff

Hebrew letter Shin meaning,(God, love, and Steadfast)

A biblical Hebrew letter meaning God's love and faith in us and our steadfastness in him.

Downloads
157
Likes
9
Rating
0
P
Printableshackawayjr

3M Adflo Hose to Versaflo Helmet Adapter

An adapter to convert older Adflo hoses to the Versaflo series of helmets. Secure adapter to helmet with clip, hose lines up with alignment notches and secures with 1/8th turn to the left. Maintains swivel feature of the Versaflo hoses.…

Downloads
146
Likes
12
Rating
0
P
PrintablesTony Lehnert

Tradfri Switch Desk Stand

This is a desk stand for the Tradfri on/off switch. I made two versions. One fits the switch with its metal base plate, the other fits the switch without its plate.

Downloads
139
Likes
39
Rating
4.75
P
PrintablesKiriz_43

ADF-01 Kit Card

ADF-01 Falken A large fighter developed by North Osea Gründer Industries. A product of international conspiracy, the aircraft and its design were largely influenced by Belkan ideologies. All weapons, including the chemical laser in its…

Downloads
136
Likes
53
Rating
0
P
PrintablesCaptainBobSim

KR87 ADF Radio for Flight Simulator

KR87 ADF Radio for Flight Simulator Details, PCBs, and instructions here! The Printables version will not be updated. The best place to get it is here:…

Downloads
130
Likes
7
Rating
0
P
PrintablesNiko

IKEA Tradfri Dimmer switch mount

This IKEA Tradfri dimmer holder serves two purposes. - mount the Switch to the wall - avoid switching off the power with the “old” wall switch GIRA brand Wall switch with an opening of 55mm x 55mm It's designed to work with a 6mm magnet…

Downloads
118
Likes
19
Rating
5
P
PrintablesMirko

IKEA TRADFRI Motion Sensor Angled Corner Mount and AAA tray

I hacked these parts together as I needed a battery tray and an angled corner mount for my IKEA TRADFRI motion sensor This is the AAA conversion mount. My tray fits inside the mount. Wire the batteries in series so you get +3 Volt.…

Downloads
114
Likes
35
Rating
5
P
PrintablesshakeNbake08

IKEA Tradfri Remote Stand

Dock to place the IKEA Tradfri remote on a table top instead of mounting to the wall I used a 6x2mm magnet (other sizes will fit) and a M8x20 screw, and 2 M8 nuts. Glue the magnet into the top of the cavity of the main components Screw…

Downloads
101
Likes
28
Rating
5

YADF – Yet Another Dust Filter

YADF – Yet Another Dust Filter This is a remix of the Creality CFS Filament Dust Filter , redesigned and optimized for use with IFS systems and PTFE filament tubes , such as the setup commonly used with the AD5X . While using the original…

Downloads
100
Likes
26
Rating
0
P
Printablesmintonette

IKEA Tradfri Button Holder for Skadis

Slots firmly into the IKEA Skadis pegboard. Fits both the Tradfri shortcut button and 2-button dimmer; both are the same dimensions. Uses the existing metal bracket and adhesive which come with the button. Recommend printing face up with…

Downloads
91
Likes
23
Rating
4.5
P
Printablesgrosdode

Ikea Tradfri Styrbar wallmount

Holder to mount the Ikea Tradfri Styrbar to a wall. Hole pattern also fit a German (Unterputzdose). You need two additional Magnets or iron plates 20mm x 6mm x 1.5mm to hold the Styrbar more save. just press or glue the magnets (iron…

Downloads
88
Likes
8
Rating
0
P
PrintablesGeoff

QaDFC Filament Cleaner - Remix 2

More filament cleaners! This project has seen a lot of trial and error over several months but has been good practice in designing parts for glue-less assembly and ease of use. Hopefully it's useful and interesting to others.…

Downloads
83
Likes
20
Rating
5
P
PrintablesSpradlinb

Transformers Legacy G2 Leadfoot Rotor Weapon

This is an adapter that can be used to attach to the vehicle mode of the Legacy Leadfoot figure, along with two different size rotors. The adapter can also be used to attach to the back of the figure in robot mode for shoulder-mounted…

Downloads
78
Likes
18
Rating
0
P
PrintablesKagnaw

Tradfri switch holder

Ikea Tradfri (Trådfri) light switch & Shortcut button holder. That fits the Skadis (skådis) "peg bord" There seems to be two versions of the metal backplate, they changed the "slot hole" it should fit both. Its purposely made quite thin…

Downloads
76
Likes
28
Rating
5
P
PrintablesSebazzz

IKEA Tradfri remote template

Purpose I had a spare IKEA Tradfri remote lying around, and wanted to turn it into shortcut buttons. I didn't find any suitable template to start with, so I created my own. Usage Either: Load the STEP/F3Z in your favorite CAD tool Use…

Downloads
76
Likes
21
Rating
5
P
PrintablesBOSSailing

Tradfri remote controller holder | IKEA SKADIS |

Print it and remove the support. You need just to slide the controllers magnet holder to the hook, then put it onto the skadis wall panel. Printing settings: 15% infill Support enabled 0.2 layer height

Downloads
74
Likes
12
Rating
5
P
PrintablesStefan T.

Bike Bottle Dryer - Fahrradflasche trocknen

Leider ist für die Stufe ein wenig Support notwendig, ich habe es auf den Kopf gestellt.

Downloads
73
Likes
6
Rating
0
P
PrintablesOrg like a pro!

IKEA Tradfri Motionsensor stand

A simple stand for the IKEA Tradfri Motionsensor

Downloads
71
Likes
10
Rating
4
P
Printablesilei.ol

IKEA Tradfri Shortcut-Button Wall Mount / Wandhalterung

This Tradfri Shortcut-Button wall mount is designed to be placed on any wall in your home. A magnet is used to hold the button. Double-sided tape is used to mount it to a wall. The cut out in the center of the back is for the magnet. The…

Downloads
68
Likes
7
Rating
0
P
PrintablesAlex Bürgel

Automatic Direction Finder (ADF) for Flight Simulation

Automatic Direction Finder (ADF) instrument. Can be used for flight simulator. Can be controlled with MobiFlight. It is compatible to mrusk's Modular Cockpit Material needed: 2 Screws M3x6 2 Screws M3x10 4 Screws M4x10 4 Screws M4x20 1…

Downloads
66
Likes
6
Rating
5

Adjani Steadfast

Modèle 3D de la carte Adjani Steadfast de Magic the gathering

Downloads
61
Likes
6
Rating
0
P
PrintablesFuWeissinger

Jung Schalter Blende für z.B. Ikea Tradfri

Du kennst bestimmt das Problem, wenn Du nach dieser Blende suchst 😉. Jemand hat den Lichtschalter betätigt und jetzt ist die SmartHome Lampe stromlos. Mit dieser Blende kann man den Schalter einer Jung Dose überdecken, sodass der Schalter…

Downloads
60
Likes
7
Rating
0
P
PrintablesZerubota

Speichenklemme für Rennradfelgen: Kein Verdrehen mehr bei Messerspeichen

Messerspeichen sind eine häufige Wahl für Rennräder, doch beim Spannen können sie sich unangenehm verdrehen – und das kann die Felge beschädigen oder die Spannung ungleichmäßig machen. Unsere selbst entworfene Speichenklemme löst dieses…

Downloads
59
Likes
10
Rating
5
P
PrintablesScartsjer

Ikea Tradfri sensor holder

Ikea Tradfri sensor holder using the supplied tape from Ikea to mount to this holder. now the sensor is removable without tools needed. Print at 0.1mm max. Depending on printer the the tolerances might be a little tight. But it Al's need…

Downloads
58
Likes
8
Rating
1
P
PrintablesWim V

Constant - steadfast supporter of books

Meet Constant. With his arms outstretched, he clamps your favorite books. One more book? No problem, slide a new book in the middle and he stretches his arms even further. He likes books with a height between 19 and 23 cm (7.5" - 9"). For…

Downloads
57
Likes
43
Rating
0
P
PrintablesDamianB2

ADF4351 RF Signal Generator Enclosure

This is a tilting enclosure for a ADF4351 (or ADF4350) RF 35 MHz to 4.4 GHz signal generator. This is sold at various places including Amazon and ebay. One problem is it comes with no housing. 3D printing solves all problems though. The…

Downloads
56
Likes
2
Rating
0

tradfri led driver screw mount

Mounting bracket for tradfri led driver. This is for the driver that is compatible with the smart home app from IKEA. It has 2 5 mm holes for screws, so you can screw it to the bottom of a desk, for example.

Downloads
55
Likes
7
Rating
0
P
PrintablesArea51

Enclosure for Smart LED Tradfri driver, IKEA Hack

IKEA Tradfri Home Smart is a great solution for home automation. When it came to lighting the kitchen table, IKEA's driver solution was a big grey unit of only 10W (se photo) - there simply had to be a smarter solution... My solution…

Downloads
53
Likes
12
Rating
0
P

LK FUGA to IKEA TRADFRI adapter

I wanted to upgrade the apartment by replacing all normal wall switches with zigbee ones. But pleacing the new switch next to the normal one, meant that everyone kept switching off the wrong one, ruining the attempt to make the lights…

Downloads
53
Likes
7
Rating
0
P
PrintablesYBR

Tradfri schneider asfora

adapter for Tradfri on a Schneider Asfora shutter with a diam 10mm magnet

Downloads
52
Likes
3
Rating
0
P
PrintablesLeon

Ikea Tradis Mount for Tradfri Bridge

Mount for ikea tradfri bridge on skadis board. Printed with supports

Downloads
52
Likes
6
Rating
0
P
Printablesarminth

Lamp shade mod for IKEA MISTERHULT and Tradfri globe

This is an addon for IKEA Misterhult lamp. If you want to use the Tradfri big LED globe, the lamp protrudes a lot from the lamp. First measure is to turn around the metal ring inside the lamphanger, which gets the globe up a bit but not…

Downloads
50
Likes
10
Rating
0
P
PrintablesRobert

Decora Wall Plate with Tradfri On/Off Switch Mount

Created a Decora Wall Mount for a single gang box that would allow for the mounting of a Tradfri On/Off Switch. I used the screws from my single decora wall plate for this new wall plate. For the Tradfri remote, I used 3mm screws and nuts.

Downloads
50
Likes
5
Rating
5
P
PrintablesAdam Strojek

Ikea Trådfri EU Light Switch Cover (Tradfri)

Recently I have changed all lightbulb at my home to Ikea Trådfri. After this change I have left with two problems: where to put remotes when they are not used and how to prevent other people from turn off light using old switch. To solve…

Downloads
49
Likes
9
Rating
0
P
PrintablesJoe Printable

Paiute Deadfall using paint stir sticks

Needed to create a Paiute deadfall to get control of a backyard rodent problem. Used a couple of paint stir sticks (27x4mm cross section), some nylon cordage, and a concrete paver. A bamboo skewer was used as the trigger stick with the…

Downloads
49
Likes
12
Rating
5
P
Printablesfrnktrgr

HSW IKEA TRADFRI Wireless Dimmer Plate

Very simple plate to attach the IKEA TRADFRI wireless dimmer (E1743) to the Honeycomb Storage Wall with the included adhesive strip. Requires only 6 grams of filament! Print instructions No supports. My settings for PETG: Layer height:…

Downloads
49
Likes
21
Rating
5
P
Printablescsicar

Tradfri Lichtschalter-Halterung

Halterung für Tradfri Schalter auf einem normalen Wandschalter. Es wird nur die Schaltplatte ersetzt. Das heißt, dass dafür der Lichtschalter nicht aufgeschraubt werden muss.

Downloads
48
Likes
5
Rating
0
P
PrintablesKOMPOTKO

Gopro mount for helmet scorpion ADF 9000

Gopro mount for helmet scorpion ADF 9000

Downloads
46
Likes
3
Rating
0
P
PrintablesNbdyWnKenobi

Inverted Electrical Mounts for the Printers For Ants SaladFork Mini-Trident Electrical Mounts

If you want to invert you electrical bay on the Printers For Ants: SaladFork then here are the items I designed and used for my kit. Everything is low profile to allow the working on your printer without flipping it over. You need (2)…

Downloads
46
Likes
15
Rating
0
P
Printablesbstabens

Cookiecutter Pfadfinder

Keksausstecher für Pfadfinder - Kothe, Affe und Pfadfinderlilie

Downloads
45
Likes
11
Rating
0
P
PrintablesChurro1741

Badflower Logo

The logo for the kick-ass band Badflower. Print these out and hand them out to fans or remix them into earrings, but if anyone is profiting from the design, it should be the band, so please don't sell these, unless you give the band the…

Downloads
45
Likes
4
Rating
0
P
Printablesps219993

Vectra C Lenkradfernbedienung Wippen

Die Wippen meiner Lenkradfernbedienung haben das zeitliche gesegnet. Ersatz musste her! Gedruckt und getestet mit einem Formlabs Form 3 (Grey und Tought 2000 Resin)

Downloads
45
Likes
1
Rating
0
P
Printablesmax3d

DPSG Lilie Keychain Schlüsselanhänger Pfadfinder

Designed this keychain hope you enjoy i added also the Inventor file (iges) Print Settings Printer Brand: Anycubic Printer: All-metal Mega Rafts: No Supports: No Resolution: 0,2 Infill: 50 Filament: ka PLA Category: 3D Printing

Downloads
44
Likes
3
Rating
0
P
PrintablesMFBocka

Ikea Tradfri Shortcut button holder

For attaching use double side tape.

Downloads
43
Likes
2
Rating
0
P
Printables2beers

Radfelgenkappe für Autec Alufelgen 54,7mm - Wheel rim cap

Hierbei handelt es sich um Abdeckkappen für Autec Alufelgen. Die Kappe passt für ein Loch mit 54,7mm Ich habe in PETG gedruckt da es höhere Temperaturen aushält. __ These are cover caps for Autec aluminum rims. The cap fits a 54.7mm hole.…

Downloads
43
Likes
8
Rating
0
P
PrintablesModellbau D

Motorradfahrer/ motorcyclist

motorcyclist figure, easy print, support needed :)

Downloads
43
Likes
5
Rating
0
P
PrintablesChurro1741

BADFLOWER Token

Remixed the daisy design by craeen (Thank you!) by adding the text "BADFLOWER" to the bottom. Please do not sell this! If anyone should make money on it, it's the original designer of the daisy (Careen) and Badflower. It's just something…

Downloads
42
Likes
6
Rating
0
P
PrintablesMarc

Ikea Skadis Holder for 2 Ikea Tradfri On/Off Switches

Ikea Skadis Holder for 2 Ikea Tradfri On/Off Switches (can be put up horizontal or vertically) based on the attachment style of another model which can be found either here on printables…

Downloads
42
Likes
8
Rating
5
P
PrintablesBitmag

Cessna 172RG ADF knobs

Just a replacement for old cracked plastic C172RG ADF panel knobs.

Downloads
42
Likes
11
Rating
4
P
PrintablesYourigh

Drawer holder for Ikea tradfri switch

Original steel backplate fits to the holder for magnetic attachment. Originally I had just a plate to stick the metal backplate to, but sometimes I'd fling the switch off to the side, so I designed this better holder. Print: requires…

Downloads
42
Likes
4
Rating
5
P
PrintablesNell

Knife Pillar for Holme & Hadfield Displays, Knife Deck, Armory, Messer Vitrine

Only 7 knives can be accommodated in the Knife Deck of Holme & Hadfield. That was quickly too little for me. With the Knife Pillar, the Knife Deck can be immediately expanded by 5 knife places. The knife pillars fit perfectly into the…

Downloads
42
Likes
10
Rating
0
P
PrintablesStrangehadron

Ikea Tradfri Remote Wall Switch

When i started to use homeassistant in my house, i bought a lot of this ikea tradfri little zigbee remote switches because they were pretty cheap and easy to use without messing with existing wall switch. I design this part to put them on…

Downloads
41
Likes
2
Rating
0
P
PrintablesKHauptmann

IKEA Tradfri Switch frame

A simple Frame for IKEA Tradfri Switches, Dimmers and Shortcut Buttons. Just use the metal plate coming with the switch to attach the frame to the wall (or anything else) and snap the switch in. Category: 3D Printing

Downloads
41
Likes
7
Rating
0
P
PrintablesOrg like a pro!

Jung CD 500 ikea Tradfri adapter

I have painted the frame in a white high gloss coating. HINT: This desing needs “in between” frame. I had mine from a Jung network-jacked.

Downloads
40
Likes
5
Rating
0
P
PrintablesBigchease

Adf-11x raven ace combat 7

Ace combat 7 adf 11x

Downloads
40
Likes
8
Rating
0
P
Printableskaje

HP ScanJet 5590 ADF Tray - Automatic Document Feeder Tray

I purchased a used HP ScanJet 5590 for a few bucks, but it was missing the automatic document feeder tray. Replacement trays are available for purchase, but I didn't want to spend more money on something I don't use very often - it was…

Downloads
39
Likes
4
Rating
0
P
PrintablesSTORM DESIGN

IKEA TRADFRI On/Off Switch - Cover For Changing The Housing Color

Hello Everyone Since 2014, I am a maniac of building automation, or colloquially speaking, smart home solutions. Currently, my home is practically 100% automated. I have 7 pieces of IKEA TRADFRI On/Off Switch. It is present in few room of…

Downloads
39
Likes
9
Rating
5
P
PrintablesDuncan Frazer

Light Switch Cover 82mm (UK) for IKEA TRÅDFRI TRADFRI Control Switch

This is a remix of sarky_marky's light switch cover 4128200 but reduced to an 82mm square version to fit my light switch. My switch has a slight chamfer to it so the original design overhung the front of the switch faceplate.…

Downloads
38
Likes
3
Rating
0
P
PrintablesATree

Busch Jager Tradfri blind remix

Remix to have a Tradfri attachment on @Ma Gu's Busch Jaeger blind.

Downloads
38
Likes
5
Rating
0
P
PrintablesFirstMartin

Ikea Tradfri Styrbar wallmount

Wall mount for Ikea trådfri Styrbar.

Downloads
38
Likes
5
Rating
0
P
Printablesthe_ress

Minimal IKEA Tradfri Shortcut Button Holder

It's not easy to securely mount the IKEA Tradfri Shortcut Button to a wall. You can use the provided metal plate, but the magnet isn't strong enough and the button gets easily knocked down. You could attach it with double-sided tape, but…

Downloads
37
Likes
6
Rating
0
P
PrintablesfmMike

Ikea Tradfri Remote round wall mount

Missed to check out Thingiverse for a suitable wall mount for the IKEA Tradfri remote, so I designed my own a couple of days ago... better looking next time! ;) Designed as round shape for stand-alone application as shown on the picture…

Downloads
36
Likes
3
Rating
0
P
Printablesp2baron

Busch-Jaeger Solo - Tradfri Remote Holder (design included) by p2baron March 22, 2020

This is holder for a Ikea Tradfri remote. The holder fits perfectly on a Busch-Jaeger Solo frame for a light switch. Busch Jaeger product code is 2CKA001754A4109 The holder fits between the wall en the BJ frame. The Ikea remote must be…

Downloads
36
Likes
6
Rating
0
P
PrintablesSebazzz

IKEA Tradfri motion sensor mount for 15mm tube

We have tubes for central heating near the entrace of our house. This allows you to mount the IKEA Tradfri motion sensor there. Simply print it, and stick it into the back of the motion sensor. It will hold by friction fit. Then press it…

Downloads
35
Likes
4
Rating
0
P
Printablesilei.ol

IKEA Tradfri Shortcut-Button flush mount box / Unterputzdose mount

This Tradfri Shortcut-Button mount is designed to replace your old light switch. The part which looks like a cross is screwed into the flush mount box. A 20mm x 2mm Magnet is placed on the back of the case. The case is screwed with M3…

Downloads
34
Likes
3
Rating
0

Power supply mount for Nankadf Programable DC Power Supply

Power supply mount for Nankadf Programable DC Power Supply, created to keep my work surfaces clear by fitting to the underside of overhead units. includes cooling consideration.

Downloads
34
Likes
5
Rating
0
P
Printablesbenerophon

Egg Holder for Siemens Fridge KI82LADF0

Siemens is not offering any egg holders which are fitting in the door racks. So I created my own egg holder for the KI82LADF0 fridge.

Downloads
34
Likes
5
Rating
5
P
PrintablesAlison Pinto

Dreadful Meadows Candy Token Insert

This is a candy token holder for the game, ‘Dreadful Meadows’. I designed it to be able to fit into the current organizer. They can be removed and placed on the display board for faster setup and gameplay.

Downloads
34
Likes
3
Rating
5
P
Printablesilei.ol

IKEA Tradfri Shortcut-Button Addition Light Switch Mount / Tradfri Shortcut Button Halterung +Lichtschalter (Typ 2511-2)

This Tradfri Shortcut-Button mount is designed to be added to a Typ 2511-2 light switch. The light switch will be used to secure the case on the wall. In addition to that, double-sided tape can be placed at the rectangular cut outs at the…

Downloads
33
Likes
4
Rating
0
P
Printablesp2baron

Busch-Jaeger Solo - Tradfri Remote Holder (design included)

This is holder for a Ikea Tradfri remote. The holder fits perfectly on a Busch-Jaeger Solo frame for a light switch. Busch Jaeger product code is 2CKA001754A4109 The holder fits between the wall en the BJ frame. The Ikea remote must be…

Downloads
33
Likes
5
Rating
0
P
Printablesdaggr

Tradfri adapter for Schneider Exxact

For mounting IKEA TRÅDFRI On/Off button in Schneider Exxact frame on top of a existing lamp button. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: Yes Resolution: 0.3 Infill: 25% Filament: Clas Ohlson PLA White…

Downloads
31
Likes
2
Rating
0
P
PrintablesStieni

Tubenadapter für Fahrradfettpresse und Schutzkappe

Über einen großen Versandhandel bestellte ich mir eine Mini-Fettpresse aus Fernost. Leider musste ich feststelle, dass diese für keine der von mir verwendeten Fetttuben funktionierte. Also musste eine Lösung gefunden werden - ein Adapter.…

Downloads
31
Likes
0
Rating
0
P
PrintablesBrummy

Tradfi Remote Holder for Kallax Doors V2

Version 2 of the Tradfri Holder .

Downloads
30
Likes
9
Rating
5
P
Printables2beers

Radfelgenkappe für Autec Alufelgen 54,7mm - Wheel rim cap

Hierbei handelt es sich um Abdeckkappen für Autec Alufelgen. Die Kappe passt für ein Loch mit 54,7mm Ich habe in PETG gedruckt da es höhere Temperaturen aushält. __ These are cover caps for Autec aluminum rims. The cap fits a 54.7mm hole.…

Downloads
29
Likes
5
Rating
0