headphone stand
Headphone Stand by MakerBot - Thingiverse
- Downloads
- 29,386
- Likes
- 3,423
- Rating
- 4.79
Counting matching models…
Headphone Stand by MakerBot - Thingiverse
A remix of mistertech's headphone holder with a reversed cord holder. Works on desks up to 40mm thick.
Intro Earbuds Cleaning Tool V2 is a small, easy-to-print earwax remover tool for in-ear headphones and earbuds . It helps you safely remove earwax, dust and debris from your earbuds without damaging the speaker mesh . The first version…
Since this stand is pretty big I split it into two pieces which can be printed together on one plate on the Prusa i3 MK3S. The print does not need any supports when printed as setup in the “Headphone Stand Split Complete.3mf” file or if…
Subscribe to find out more support free 4K Time-lapse video: Subscribe Now! http://www.youtube.com/iczfirz Very beautiful Deadpool from Eastman. Got his permission to release this MMU remix version. Sliced with PrusaSlicer and timelapsed.…
Made this for my sis to hang her headphones. A lot of hangers are great and waste less filament, but I wanted to make her something special. Holds my big MDR-Z7s no problem, you could scale down if you have smaller cans. You can fix it to…
Any feedback would be greatly appreciated . Nozzle 0.4 Layer Height 0.2mm (Recommended) Supports needed (use tree supports, build plate only) Scale it as you like :)
The Desk Headphones Hanger is a handy accessory that allows you to keep your headphones organized and within easy reach. This model is designed to be mounted to a horizontal desk up to 22 mm thick . It features a simple and elegant design…
I wanted to remove the radius overhangs on the print but realised the original STEP files were exports of the STL so I've exported clean STEP files as well as made my minor tweaks. Thread was changed to GL20 thread to hopefully improve…
UPDATE - 3-15-2023 This case is meant to be a little loose in order to protect your expensive in-ear monitors or earbuds from getting tossed around or wound tightly which can add wear and tear and strain cables over time. BUT i always…
Přívěšek z plakátu na film Deadpool & Wolverine.
On my MK3S-MMU2 at the 0.15 layer height the print takes some 20hrs to complete. I have printed in PLA, using White, Red and Galaxy Black.
The Bookshelf Mountable Headphones Hanger is a handy accessory that allows you to keep your headphones organized and within easy reach. This model is designed to be mounted to a bookshelfs vertical stands ranging from 18 mm thick up to…
This Deadpool bust can be printed without support, but I included a few tree supports in the attached “3MF” file in locations that may benefit from a small amount of support. I also included a “.gcode” file for the Prusa MK3/S/S+; if you…
Like there isn´t enough headphone holders. I wanted to makea design what fits in envelope and also Prusas plate. Assembled without screws, tools or glue, no supports needed naturally. Measurements: Height: 190mm Width: 130mm Length: 130mm…
This is my original design for Miniature Over-Ear Headphones , specifically scaled to be the perfect accessory for collectible figures like Labubu, Pop Mart, and other 1/12-scale art toys . The unique print-in-place construction means no…
Deadpool : Wrexham FC Should have given him some cleats. Feel free to accessorize and share.
A nice rounded wall hanger for a pair of headphones, this version has a hidden attachment. Choose from a smooth mounting bracket (I use this, attached by a 3M Command strip trimmed to fit) or a bracket with a single screw hole for a more…
This is Deadpool's head with holes sized for sharpies but other pens or pencils will fit fine, Was printed on anycubic mega pro, can do 5 to 10% infill, I used 0.20 layer height.
Organize your headphones, controller and charging cables with this unique stand featuring a built-in drawer for a clutter-free experience. Make sure to check out my matching stand for PS5 games:…
Description Headphone holder with screw clamp mechanism for mounting it to a desk. In this configuration desks ranging from 16 to 38mm can be accommodated. The screw features a hexagonal style head for a little different aesthetic than…
I really like the design from MakerBot team but it seem a little empty to my eye, so i added this hexagonal decoration. You can get the file to do your design and personalize as you want!
A minimalistic headphone stand. There are two versions: With round pipes (Labeled “ROUND”) Alternative: more rectangular (Labeled “RECTANGULAR”) I prefer the aesthetics of the ROUND version, but this version takes a bit longer to print.…
Stable Sony WH-1000XM5 headphone stand with charging cable box. The upper part is designed exactly for the Sony WH-1000XM5, but it will certainly fit on other headphones. The upper part is printed separately due to the height of the…
Printed with PLA and a .4mm nozzle. Included are BOTH gcode and .3mf's. Enjoy! The color changes happen pretty quickly. Color changes go WHITE - BLACK - Red.
It s a clamp for a desktop that hold a soda can and headphones
This is my own design for a "SteelSeries Arctis Pro Wireless" Headphone Stand. It fits exactly around the base / sender so you can hang the headphones right over the base. The connections fit exactly, so no glue is required (might need…
Printed at .2mm layer height.
I wanted a sleek and easy to install headphone holder for under my desk. I've seen similar models in the past, but they can be a pain to mount if you don't have a lot of space under the desk. I designed this mount to be easily placed with…
Turn the screw to tighten Great for thicker desks
Story behind model For years, the KOSS PORTA PRO headphones have been my enduring musical companion. Their timeless design continues to deliver an exceptional audio experience that never fades. Recently, upon repurchasing this immortal…
Did you ever find yourself debating whether to buy headphones with proper noise cancelling or headphones with good cat ears support? No need to choose anymore! Now you can have state of the art noise cancelling AND superb cat ears! With…
This is one of those things that if you need them, you'll know. Otherwise you probably won't give them a second thought. If you need them, you've either had one break or you learned that if you want to customize your headphones, you're…
My Q30 headphones, like every over-ear headphone I've had before them, broke after a mere four months of use. Fortunately, the headband has a spring steel structural piece, so I could still use them, but the broken plastic threw off the…
These are colored, by layer, Marvel logo ear savers. They are generated from artwork I found on the web, then converted to SVG (Vectric) and then STL files (TinkerCad). They are set up to use a common configuration using the…
This is a simple replacement arm i built for my wireless Skullcandy Crusher Evo headphones. the mod is very easy to install, just pop the old arms out with a screwdriver and the new ones should fit in just fine, it goes in the same way…
Deadpool riding a Unicow and it's a desk organizer!!! Three part print; main part is three colour - please see included PDF for very important additional info. Print all three parts and glue carefully together. Please hit the like ♥and…
CZ Jsem velký fanoušek Formule 1 a potřeboval jsem stojan na moje sluchátka k PC. Tak jsem dostal nápad a vymodeloval jsem si můj vlastní stojan. Našel jsem na Thingiverse skvělá loga všech týmů F1 od uživatele StijnDej. Link je uveden.…
I needed a clamping headphone hanger, with some way to secure the cable. Ideally it should be both compact and functional. Design and exterior look of the thing hasn't changed much since its conception. I printed the thing and found the…
I wanted to use this holder mounted to the wall of a cubicle overhead storage bin. Recommended print settings: Layer Height: 0.2 mm or less Infill % : 80 in C-clamp area, 15 elsewhere. 80% for screw. Supports: Yes, for threaded hole…
Hello, I designed simple heaphones holder. There are 2 versions. First (screw version) is for every desk and you can screw it with simple screw. Second version (Ikea Bekant version) is for Ikea Bekant desk,…
A simple, easy-to-print desk-mounted snap hook. The original design is built for a 3cm desk, but you can change this directly in the slicer. The simple design snaps right onto the desk and has an option for padding if you are worried…
Clamp-on rotating organizer that clamps on to shelves, desks, and worktables. Hang your headphones, pens, pencils, and whatever else you've got on your desk to keep things tidy. Work in progress, so feedback is appreciated. Printed in…
Headphone holder mounted on cubicle divider Material: PLA, PET-G, ABS etc, Layer high: 0,3 or lower No supports needed
CZ/SK Vhodný pro nenáročné uživatele, pro milovníky McLarenu a F1. k připevnění jsou zapotřebí 2x M2,5x20mm šrouby. Děkuji za stažení a užívejte si model EN Suitable for undemanding users, McLaren fans and F1 lovers. 2x M2.5x20mm screws…
Do you love Deadpool? Do you love well-maintained headsets? Do you have a vertical surface on which to mount this hanger? If so, this is perfect for you. The triangle in-fill is done in PrusaSlicer, but I included the whole model if you…
This is a simple pressure that requires supports (optimally with organic supports). In addition to the STL, I also include the 3MF and gcode files that I used to print the files shown in the images on my Prusa MK3s+. The table top may be…
For Headphones with max width of 3,5 cm Max Clamping distance 3 cm
3 versions du support : Simple Avec attaches câble et encoches format USB type C Avec attaches câble et encoches format USB type C bicolor 2 coussins différents. Le coussin est à imprimer en FLEX/TPU/TPE de préférence Le mors de la vis de…
Easy to print stand for headphones and mobile phone. Two parts fits together nicely and holds firmly. Gluing parts together is not needed and stand can be disassembled and assembled again and again. The height between the base and the pad…
Print-in-place headphone holder for installing under table with 4mm screws.
Eine schlichte Headset Halterung um sein Headset neben seinem Tisch Lagern zu können. Position aussuchen wo er am besten Hängen soll, den Anschlag ganz an den Tisch hin drücken und einfach mit zwei Schrauben (länge nach dicke des Tisches…
My ear cushion from my Marshall Major III was very used. So I make an adapter for use a ear cushion from a Marshall Monitor II that I had. It's printed with my prusa MK3S+ in 0.2 mm and with organics supports everywhere. I have recycled…
Headphone holder for your honeycomb storage wall. If you want to check the honeycomb storage wall then go to: https://www.printables.com/model/152592-honeycomb-storage-wall If you like my model, please be so kind as to upload your own and…
Dust cover for the Drop Sennheiser HD58x Jubilee and Drop Sennheider HD6xx. If you have slightly smaller or larger pads/cushions but with the same shape, you can simply adjust the size in you slicer. The cover was measured with new and…
Simple accessory for hanging headphones and alike under any surface. Recommended to print in PETG on 0.6mm nozzle with no top and bottom layers, 2 perimeters, 15-20% infill and 0.3mm layer height. Install using 3x ¾" screws and don't over…
The brackets of the cable routing got brittle so I decided to redesign and 3d print them. Now my retro garrett headphones are like nw. You can re-use the screws and nuts. More infos on my blog:…
CZ Jsem velký fanoušek Formule 1 a potřeboval jsem stojan na moje sluchátka k PC. Tak jsem dostal nápad a vymodeloval jsem si můj vlastní stojan. Našel jsem na Thingiverse skvělá loga všech týmů F1 od uživatele StijnDej. Link je uveden.…
I really liked the original cat ears, however the hooks were a bit too large for my headphones, so I've modified them a bit to fit better. I took the original .STL, remove the hook and let a STL fix-up tool fill the hole. Then I've added…
Headphone stand for yamaha p125 piano. Uses the existing screw on the piano keyboard
CZ Jsem velký fanoušek Formule 1 a potřeboval jsem stojan na moje sluchátka k PC. Tak jsem dostal nápad a vymodeloval jsem si můj vlastní stojan. Našel jsem na Thingiverse skvělá loga všech týmů F1 od uživatele StijnDej. Link je uveden.…
CZ Jsem velký fanoušek Formule 1 a potřeboval jsem stojan na moje sluchátka k PC. Tak jsem dostal nápad a vymodeloval jsem si můj vlastní stojan. Našel jsem na Thingiverse skvělá loga všech týmů F1 od uživatele StijnDej. Link je uveden.…
Headphone stand that attaches to a shelf
CZ Jsem velký fanoušek Formule 1 a potřeboval jsem stojan na moje sluchátka k PC. Tak jsem dostal nápad a vymodeloval jsem si můj vlastní stojan. Našel jsem na Thingiverse skvělá loga všech týmů F1 od uživatele StijnDej. Link je uveden.…
CZ Jsem velký fanoušek Formule 1 a potřeboval jsem stojan na moje sluchátka k PC. Tak jsem dostal nápad a vymodeloval jsem si můj vlastní stojan. Našel jsem na Thingiverse skvělá loga všech týmů F1 od uživatele StijnDej. Link je uveden.…
Remix of Chris's twin track bracket with a headphone hook so now it's just a “one trick pony.” Printed upside down with supports on the hook, keeps the twin track hooks clean.
Print instructions: Material: PETG Layer: 0,2 mm Perimeters: 2 Infill: 15% Infill Pattern: Grid Supports: No, Brim: No This model does not require any special settings, more details in the attached 3MF file. Part list: Printed part Bolt…
Muffler holder for siegen weapon cabinet
Adapter piece is mounted between the mounting peace at the handle bar and the part that holds the bottle, to level the bootle if the handle bar is angled. A thread insert (M4) per part is needed for the the additional needed screw. The…
For a friend's wedding, I created original cufflinks that no one else will have that day. Some of the wedding guests were chosen to wear a secret MCU reference and I just couldn't find my old cufflinks at home. Hence this choice. For…
I needed a simple headphone hanger to attach to my Yamaha digital piano. The width of the hanger is 0.750 inches. The opening for the headphone part is 2.00 x 1.00 inches. I designed the model walls to be 2 mm (0.078 inches) wide so I…
This is a remix of the excellent model by JYC_RS. I printed this a while ago but was never happy with the overall stability. So I added some weight pockets to the base. The new version is visually identical, while the total mass increased…
Recommended print settings: Material: PLA/PETG Layer Height: 0.15 mm or less Infill % : 50+ Supports: Yes Print Orientation: Default as modeled
Holder that clips onto the Yeti Shock mount to hold your headphone. Have used this extensively for the past couple years. Printing Instructions I use PETG but PLA should also be fine
The design of the top of the Quad Pod attaches easily and securely to the GoPro mounting system. I would print the main body vertically and the arms horizontal.
This nut is an addition to the previous model, and is compatible with previous designs. Features: Increases clamping area Allows for compatibility with thinner wall Retains the threaded screw Recommended print settings: Layer Height: 0.2…
headphone holder Qubee innovative 3D-Printed Headphone Holder, designed to keep your audio gear organized and easily accessible.
Headphone mount I designed to clip onto the tube for a folding table I bought from Target . The inner diameter of the clip is 22.15mm so if you need bigger or smaller you could probably scale from there. I also printed in PETG so it…
Needed a proper angled mount to store and display my headphones. I meassured out the angle of my ceiling (see picture) and designed a sturdy 3 part ceiling mount. There are spacers in the back, for my wall/ceiling I designed the spacer to…
With this piece you can use any headset with a button and use it as a photo trigger for timelapse. Adapted for Ender3 V2
-This Is usefull and quick to print headphones holder. -Printed In PLA -I have used 2 14x5 neodym magnets and It holds up without a problem. If you want you can use slightly smaller magnets and glue them in so they would not move or…
A custom-designed hook for helicopter or airplane headphones, created using Tinkercad, offers a practical solution for organizing and securing bulky aviation headsets in the cockpit or hangar. Designed with precise dimensions to fit…
/Easy assembly (no screws needed) /Integrated cable management /Modifiable parts included Print all parts :D Assembly begins: Take this. Take one piece of prusa spool and just click it. If you want, use led tape and stick it inside the…
✔ For more sculpts like this, and if you are able to support my artwork, take a look at my Patreon :) This has become one of my most popular prints, and is a “remaster” of one of my older Deadpool sculpts, that now requires no supports!
lumo · headphone stand modern minimalist headphone stand assembly important · make sure that: your filament is dry so that it deals appropriately with the tolerances your build plate is properly clean so that there aren't adhesions issues…
Inspired by nature's powerful rhythms and ever-changing dynamic beauty, this headphone stand is my abstract interpretation of the power of "waves" and "Onami". The form draws from the sweeping power curves of crashing waves, translated…
Simple but beautiful design headphone stand in two versions. (Long and shorter version) Print Settings: Layer Height - 0.2 Infill - 15% Walls - 2 🚀 Support My Work & Supercharge Your Business & 3D Projects! 🧡 Join my Patreon and unlock…
headphone stand · reDesk modern minimalist headphone stand with grid patterns the base screws into the threaded stand, the tolerances are tight, so be mindful and patient and you'll be able to tighten it right into position , and will…
Check out this Spider-Man headphone stand! 🕸 It's the perfect way to keep your desk organized and show off your favorite superhero. I'd appreciate a Like if you enjoy my work! Don't forget to visit my profile for many more cool 3D prints…
Headphone holder for M4 countersunk screws Model without holes https://www.prusaprinters.org/prints/16725-headphone-holder Bigger version https://www.prusaprinters.org/de/prints/43493-headphone-holder-big
A headphone holder with a screw for tightening it to the desk. There is a version with and without a hook. The main purpose was a place to store a seperate microphone and help with cables. Hooked version needs supports on buildplate.…
Two minimalistic headphone stand designs. Both designs come in two variants, one for smaller printers where the base is detached and a full one.
Soporte para auriculares ajustable en altura No requiere ningún tornillo para su montaje, es todo impreso en 3D. Archivos 3mf incluidos, preparados en Prusaslicer y Bambustudio. La placa es personalizable. En los archivos encontrarás una…
headphone holder / headphone stand Printable without support
This unique Batman headphones stand is a perfect accessory for fans of the Dark Knight. The Batman inspired design makes the stand not only practical but also a stylish addition to any desk. It keeps your headphones safe, organized, and…
Update 2023-04-30 Now updated to not require any screws everything just snaps together. Old version still available if you prefer it. Original Description Universal headphone holder for use with IKEA Skadis pegboard. 4 hooks for maximum…
UPDATE 28JAN2018: I have added a "WIDE" version that can accommodate headphone headbands up to 55mm wide. The original model accommodates headphone headbands to 45mm wide. UPDATE: The "Long" version of the screw could grip on to a 1mm…
headphone & headset holder / stand The bottom is hollow, if you want to put something heavy in there like sand.
A simple but characteristinc design for a modern headphone or headset stand. Great to display or rest your device on your desk. Best to print in - no special settings required, standard print settings are just fine Happy printing!