1,827 models
18/12/2024: Well if you are into Mercedes trucks chances are you are not looking for a french car (!) But anyways you could give a look at my new model the Peugeot 3008 RC chassis and body . 17/02/2024 : I'm releasing a new shock absorber…
Print approx. €1.35–€1.65 excl. taxPreliminary estimate for one variant
This is a 3D printed keychain design of a Prusa Filly assistant. It is a miniaturized version of the popular paper clip character present in PrusaSlicer. This keychain is made to be attached to your keys or bags, serving as a cute…
Print approx. €0.50–€0.61 excl. taxPreliminary estimate for one variant
This is a wallmount for the Home Assistant ZBT-2 zigbee/thread antenna. The mounting holes are designed for M3 countersunk screws. Overall it has a snug fit and offers enough resistance that the antenna cant easily fall out of the mount.…
Print approx. €1.24–€1.51 excl. taxPreliminary estimate for PETGSource material: PET
The fixed length column for TwoTreess' TTS-55 to adjust the laser focus with an installed Air Assist that the manufacturer forgot! If you have installed the original Air Assist, the distance to the workpiece changes. With this model, you…
Print approx. €0.21–€0.26 excl. taxPreliminary estimate for one variant
Tap is a bluetooth dual switch access device that enables people with disabilities to control mobile phones, tablets and computers. It works by activating switch control on the selected device, and mapping Tap’s customisable buttons to…
Print approx. €2.97–€3.64 excl. taxPreliminary estimate for one variant
Having recently purchased an Original Prusa i3 MK2 (and now MK3/S/+), I was originally dissatisfied with the poor bearing mounting method that can easily introduce variability in the Y and Z axes. Inspired by other overly-complicated…
Print approx. €0.40–€0.49 excl. taxPreliminary estimate for one variant
A simple case for a Raspberry Pi and the Sonoff ZBdongle-E, not ZBdongle-P! Pay attention, they are almost the same dimensions and look the same. I think all -E models have the label “Zigbee 2.0 USB Dongle Plus ” on them while the -P…
Print approx. €5.00–€6.11 excl. taxPreliminary estimate for one variant
Note: You still have to clean the lens regularly before the laser. There is definitely smoke building up there! Update Feb 2021 V 2.2 better Airflow ------------------------------------------------------------------- Hier habe ich für…
Print approx. €0.60–€0.73 excl. taxPreliminary estimate for PETGSource material: PET
A reading aid that brings both style and structural soundness together to give an unmatched comfortable feel when holding any book, the rounded fillets ensure that the thumb is comfortable when reading, and that there is no chance of any…
Print approx. €1.05–€1.28 excl. taxPreliminary estimate for one variant
This key turner is a useful assistive device for people with arthritis or missing digits to operate their keys. Users loop their finger through the hole and twist to lock and unlock doors with minimal wrist movement. Print instructions…
Print approx. €1.16–€1.42 excl. taxPreliminary estimate for one variant
Case for a Raspberry Pi 4 B running Home Assistant OS with two modules : Zigbee 3.0 USB Dongle RTL-SDR Dongle for 433 Mhz devices Other components used : 30mm fan (from my previous RPi 4 case) 4x m3 insert (CNCKitchen M3 standard insert)…
Print approx. €6.40–€7.83 excl. taxPreliminary estimate for one variant
Custom box for Home Assistant Glow sensor, built on D1 Mini and ESPHome. In the files you will also find a modified version (v2) of the sensor box with a holder for easier removal of the sensor. Home assistant Glow by Klaas Schoute :…
Print approx. €2.36–€2.89 excl. taxPreliminary estimate for PETGSource material: PET
*New Update just up-loaded: 01-22-2025 “File name labeled with UPDATE-v2.” See file for further update details. **New Update just up-loaded: 02-01-2023 “File name labeled with UPDATE.” See file for further update details. ***Had to brace…
Print approx. €3.02–€3.69 excl. taxPreliminary estimate for one variant
Left and Right end parts to add that extra flare to the rear spoiler, remember all files are separate downloads. Thickness is 1/8" or 3.175mm More Models are coming, already have at least four more models just revising hole sizes as I…
Print approx. €0.28–€0.35 excl. taxPreliminary estimate for one variant
I wanted to control the tilt of my 2" venetian blinds through Home Assistant using ESPHome. My first setup was using a 28BYJ-48 stepper motor which worked but is was barely strong enough for the job. I had to use gear reduction to power…
Print approx. €0.20–€0.25 excl. taxPreliminary estimate for one variant
With certain models of TwoTrees diode laser rigs, including TTS-25 (2.5W), TTS-55 (5.5W), TTS-10, a 3D-printed holder comes with it, that holds the nice “Focus Assist Metal Column.” In my case the hole was too small (too tight for the…
Print approx. €0.85–€1.04 excl. taxPreliminary estimate for one variant
A remake of the Raspberry Pi 4 B Case - Home Assistant. One centimeter longer so it will fit the sonoff 3.0.
Print approx. €4.64–€5.67 excl. taxPreliminary estimate for one variant
A case for fitting the Raspberry Pi4 with Sonoff Zigbee V3 Stick . Needs: 4x Brass Inserts M3 x D4,6 x L3,0 4x Brass Inserts M3 x D4,6 x L5,6 4x BHS 3x6mm 4x ISO 7380-1 3x8mm Build should be selfexplaining, but: The 4 shorter Brass…
Print approx. €6.16–€7.53 excl. taxPreliminary estimate for one variant
Print Settings This model was printed on a Prusa CORE One using the following settings: 0.4 mm nozzle 0.20 mm layer height PETG filament 3 perimeters 30% gyroid infill 33 minutes print time 9 g material No supports required. Standard…
Print approx. €0.54–€0.66 excl. taxPreliminary estimate for PETGSource material: PET
This is a Grey Birch La Chassis Rear Bag Rider. Mounted with (3) bolts, (2) on upper leg and (1) on the bottom. The bottom bolt is not required but adds a lot of stability. If you use the bottom bolt you will have to drill and tap the…
Print approx. €2.18–€2.67 excl. taxPreliminary estimate for one variant
A cool looking Raspberry Pi 3B case inside Home Assistant logo :) The model uses 2 colors yet it designed to be printable on a single nozzle printer thanks to Z hop feature. The model has a GoPro mount which allows mounting the case on…
Print approx. €2.32–€2.84 excl. taxPreliminary estimate for one variant
With this box you can install Home Assistant Glow on an esp-01s board powering everything directly from main power of your house. From original setup of the Glow I removed the status led because I don't need it, but it can be readded…
Print approx. €3.98–€4.86 excl. taxPreliminary estimate for PETGSource material: PET
Whats you need? Mirror for FLA part.n. 5K0.857.511.B Assistent camera 3Q0.980.654 The Best choice it's index H 34 Pin 0.5mm Pitch FPC Cable Extension Max length for works without a problem is 20 cm…
Print approx. €4.61–€5.63 excl. taxPreliminary estimate for one variant
Problem ist, meine Brauchwasserwärmepumpe Bosch5000DW baugleich Buderus WPT200.4 AS ist Photovoltaik-Ready. Was immer das heist? Den wenn ich diesen Kontakt schließe erhöht sich nur die Soll-Temperatur auf einen Eingestellten wert.…
Print approx. €1.96–€2.39 excl. taxPreliminary estimate for one variant
Cover/case for the Home Assistant ZWA-2 z-wave antenna if you need another color to better fit your home. There are single color versions for different printer sizes and one version if you want to have a multi color antenna. Recommended…
Print approx. €1.08–€1.32 excl. taxPreliminary estimate for one variant
This rear chassis plate for Kyosho Dirt Master normally only comes on the UM574 Gear Box Set parts tree (upper right of picture): All the critical features are there in my model, so that it fits and functions like the original part. It…
Print approx. €1.24–€1.52 excl. taxPreliminary estimate for PETGSource material: PET
Stand made of five parts. Assemble using 8pcs of M3x8mm self-tapping screws. You might need to drill the lower holes of the leg with a 2.5mm drill. The stand is for Kyosho Fazer chassis with slots in the bottom.
Print approx. €3.14–€3.83 excl. taxPreliminary estimate for PETGSource material: PET
Seeed Studio ESP32C6 + HiLetgo MAX98357 + CQRobot Speaker Case Dimensions: Speaker - https://mans.io/item/cqrobot/cqrlb4o3w-b Amplifier - https://www.adafruit.com/product/3006 ESP32C6 - https://www.espboards.dev/esp32/xiao-esp32c6/ No…
Print approx. €0.92–€1.13 excl. taxPreliminary estimate for PETGSource material: PET
This Project assumes that you already have a HomeAssistant server running! Hardware: Neopixel strip (WS2812B; 60 LED/m; 5V ) small wires Wemos D1 mini board (or any other small board that can run WLED) Power supply 2 x M3x5 screw…
Print approx. €0.58–€0.70 excl. taxPreliminary estimate for PETGSource material: PET
Více informací: HomeAssistant/SHT-21_Light_Sensor_168 at main · HonzaRuzicka/HomeAssistant (github.com)
Print approx. €3.27–€4.00 excl. taxPreliminary estimate for one variant
Electronically Assisted Astronomy (EAA) is a corner of the amateur astronomy hobby that uses cameras and electronic viewing devices to enhance the viewing experience of dim fuzzy astronomical objects. The Celestron Origin smart telescope…
Print approx. €5.24–€6.41 excl. taxPreliminary estimate for one variant
UPDATES: 12/2021 "A" parts for small servo "B" parts for big servo 03/2024 Improvements on the following parts: Body L and R, Case Holders, Gear 1 and Rear Frame R. 05/2024 improved design, ready to print plates, new parts and updated…
If you like my stuff please consider buying me a coffee https://ko-fi.com/philm 3D printable replacement chassis plate for the popular 4WD Arduino robot/smart car Includes a split version for printing on standard 200 X 200mm beds To join,…
*v2. 22nd February 2024 - screw holes in left and centre plates updated to clearance holes DRAG is an assistive device that enables users to write or draw without having to form a tight closed grip with their fingers. Simply rest your…
3D Printed race track RC car 1/10 scale 3D printed body available HERE Step files of all the 3d printed parts are now available Stay tuned for exciting new projects on our Facebook group The 3 main guide listed above contain all the…
For the most up-to-date parts, visit the GitHub project page . Video: https://www.youtube.com/watch?v=_t0HLC2bZMU This is a 1/28 scale RC chassis designed to be compatible with Kyosho MINI-Z body shells. Current version fits 90mm (M)…
This is the mount I designed to house a Raspberry Pi and display in the wall to control my Smart Home. The idea was to get a flush, professional-looking installation that makes the display feel like it was always part of the wall —…
A chassis designed for a custom LFR.
G wagon - True scale model After months of designing and testing, The design is finally ready. A Performance RC model with offroad capabilities. The chassis has ~150 printed parts. Join our : Discord The body for this Chassis can be…
New V3 with grooves for grip, angle markings, and modified dovetail channels! Slightly tighter clearances as well for less play. New V2 dovetail design added! Slightly flexible filament like PETG recommended to join the pieces without…
video about project: [v 1.0] The project is currently in the alpha phase. I'm sharing the model for the finger, thumb, and wrist stabilizer, which can be molded to fit the wrist shape by heating it with a hairdryer or heat gun. To adjust…
3D Printed OFFROAD RC chassis 1/10 scale RC BODY available HERE Stay tuned for exciting new projects on our Facebook group For any technical support please contact the following email : [email protected] The 3 main guide listed…
1:10 RC chassis with adjustable wheelbase, and flexible suspension. How to build it See pictures and fusion 360 assembly drawing. There is color code bolts. Green - 8 mm bolts Yellow - 12 mm bolts Black - M3 nut Filament Prusament PLA -…
Files for the XT30, XT60 and XT90 are now here…. EDIT: 8/10/22 Created the parts with raised letters. Mark them with a felt pen to make them easy to stand out. I got tired of fighting to keep the plug and wires in place while soldering…
Boden tube to extruder assist used to straight the boden tube at the top of the extruder so the filament goes in easier.
This is still an untested WIP, but I am uploading in case people like the idea enough to modify to fit other printers. I intend for the handles to be useable. A ½" square profile steel pipe is to be tapped and inserted into the top…
This is for the NON NIVOMAT suspension! For further details, please refer to my work in progress, collaborative, P2 XC70 Lift Guide Here! (A PDF Version is also available under the files tab in case the link is broken) This should lift…
This mount fastens to the top M3 screw hole for the wiring harness anchor on the right rear of the ECC. There is a hole for refastening the anchor point for the harness in the model. However, it is not required since the design of this…
UPDATE: 7/3/2025 I have added fusion360 and step files for the backend, if someone want to run wild with it and make modifications. If you do make changes, please upload as a remix. These files are not intended for commercial use. It…
This is an open RC car chassis project. Step files are attached. Remix, update, redesign as you like. You need to print the gears with 0,2 mm nozzle and %100 infill. Rest can be printed with 0,4mm nozzle and %80 infill. I printed all…
-Check out my new design here - This is a work in progress scx24 chassis. It has a slight angled skid and fully customizable skid plate angle to allow better break over angle. There is a version for all wheelbases ( I have not tested the…
This 3D-printable model draws heavy inspiration from other 1:12 and 1:16 scale models. Every component was designed from the ground up specifically for 3D printing. Not much into RC's? Check out this flexible rolling chassis instead!…
Was looking for a good representation of St. Francis of Assisi and everywhere I looked I came up short. The main model is from a 3d scan of a bronze figure of St Francis of Assisi carved for the high altar of the Santo in Padua, made by…
Update März 2024 Ich habe noch zwei weitere Embleme von Tegernseer und Erdinger hinzugefügt. Das kleine Augustiner-Emblem hat jetzt ebenfalls einen glatten Rand. Vom kleinen Tegernseer-Emblem gibt es zudem noch eine “leere” Variante zur…
Chasis de un carro de Arduino más sus adaptadores
This is a chassis for 1/43 scale bodies like Carrera Go, SCX Compact or other bodies. With this chassis you can convert almost every 1/43 scale car to a RC car. The only things you need are two servo (steering and motor), some screws,…
This is V2 of my Tremor chassis for the SCX24 that I designed. It is a low CG-style chassis / Comp chassis. *If you are interested in selling 3D prints of this model please contact me* There are 2 versions to this chassis. A flat skid…
This car chassis allows you to replace a broken acrylic chassis or have fun upgrading your current kit to a fun buggy-style model. This model has been designed to print with minimal support (only the front face which holds the ultrasonic…
Welcome to the Universal Chassis! This chassis was created to fit the needs of LCVT, a club dedicated to making custom lightsabers from scratch. All the more recently built sabers found on their website use this exact chassis. The main…
Print it with TPU and it will not scarf your camera window. It holds itself without the need of any glue or doublesided tape.
Basic wall mount for Home Assistant Green. 2mm thickness and 1mm space between the cooler and holder. 2x screws 3mm, with D5mm head. Printed with PETG No supports
Multipurpose Robotic car chassis, compatible with 9v Geared BO motors. Designed for 12v 1.3ah lead-acid battery pack. You can easily mount the battery without any screws or glue. If you found this useful, please donate what you think it…
Update: Added .step and fusion360 source files I plan to use this automated iris remix for my prusa enclosure and later to control my air exhaust system from the printers and laser cutter. Using a 24 teeth spur gear instead of th 12…
The assistive pencil grip is an adaptive aid designed for people with low grip strength and hand dexterity. The pear shape allows writers to rest their fingers in a natural writing position. Users can choose between two sizes — 7.8mm and…
A simple assistant to keep a constant angle while sharpening knifes with a whetstone. Technical Data: for Whetstone 180x60x30 for Whetstone 182x62x30 for Whetstone 200x50x25 Print Settings: no supports required printed with normal PLA…
This Magazine pull is ment to printed in TPU, an
For more info about this project, please have a look at my blog post .
Replaces the top cover of a Lenovo Mx20Q/X and provides fan opening for 120 or 140mm fans. It's not a total like for like, so you'll need to bond the front panel to the case as the supplied screw won't be enough to hold the panel on with…
Car chassis for common yellow geared motors You will need 8 M3 bolts for mounting the motors to the body Category: Robotics
Unique Arduino Uno chassis using standard size 360 degree servos. 1.9" RC tires and a micro RS4 front tire for the caster. Designed for 3mm hardware and 4x8mm bearings. Print instructions Licence: Creative Commons - Attribution -…
Slot Car Chassis that fits a DC Motor 3-6VDC 25MM
Scale is 1:10 This chassis was designed to fit for any body in size length and width. The motor is located in the middle. Only the rear shafts are driven. There is a differential with a bewel gear with a 2,5 ratio. You could use bought…
This model is the original enclosure for Home Assistant Voice Preview Edition optimized for 3D printing. It's based on the official injection-molded parts but with some adaptation to avoid many supports : Home Assistant logo on the bottom…
Privacy focused "smart" doorbells seem to be few and far between so I decided to build one that integrates with Home Assistant via ESPHome and is easy to build. For more info about this project, please have a look at my blog post .
Universal platform for robotics or RC vehicle just for fun! ---------------------------------------------------------- This project was created as "proof of concept" of rocker-bogie chassis. It was used for testing software and mechanical…
Very simple 3D printing. Good luck with printing and lots of fun with Line Follower. Print Settings Printer Brand: Prusa Printer: i3 MK4 Rafts: No Supports: No Filament: any any any Category: Model Robots
Intro: The motivation for this design was to build an eGPU with a $250 budget with used parts with a 10 liter maximum volume. At 165mm x 165mm x 330mm, it comes in at 8.98 liters. Full assembly guide here:…
The amazing Voice Assistant finally has a vertical stand! In fact, now it has three : The original stand, which has no backing for the device. It's elegant (you can see it in the photo), but some have rightfully complained that they feel…
Hightower: A 3D-Printable Vertical Mini-ITX PC Chassis This is a Mini-ITX case in the style of the Xbox Series One, the Phanteks Evolv Shift, or the NZXT H1: it has a small footprint, but plenty of space inside. This is designed to be…
Laser Engraver Air Assist Designed for the Longer Ray5 10W Module To be printed without brim/support. 0.3mm layerhight 18mm mounting diameter 8mm air tube M3 Screw and Nut
Here are all the parts for Chassis TT-01 Type E that are printable in theory. I did this becouse i was looking for some parts and not all the parts are avaible directly in stl to print. So I tought i would upload them since it worked for…
Description: Enhance your drilling operations with this attachment that ensures a dust-free working environment. Its sturdy construction and integrated grid effectively prevent the spread of drilling waste. It’s the perfect addition for…
Found this over at 3D warehouse, looks to be made by machfud. E. https://3dwarehouse.sketchup.com/model/4daea5e0-66f1-4aa2-acda-0a4cdee04284/SCX-10 Thought I would share it here as it is so useful to mock up parts. If the scale is wrong,…
This is a resin-printed chassis for a 1/87 scale semi-trailer truck. I used cabin and wheels from Herpa Volvo FH16, but it can be used with other models. (There is no 3D model of Volvo cabin in this project!) The goal of this project is…
Leela is a 3D printable sensor housing intended to be used with Home Assistant and ESPHome. She can be described as a "room sensor" with the primary sensors being motion, temperature and humidity. The data from these sensors can be very…
18650 accupack soldering/welding assisstant for accupacks up to 4x6
I didn't realise this at the time but this should print fine without support tilted 90 degrees. Wall mount pattern is the same as the OneNineDesign RaspberryPi 7" Display case. Could be improved somewhat by make it hug the Green case a…
This is a simple design to mount your Home Assistant Yellow to the wall or any flat surface. I wanted something that would use the existing case and screws it came with. Because the Home Assistant Yellow PCB mounting holes is perfectly…
Edited 10/23/22: Revised stand on all models to accept 8 pin CPU power connectors that were previously too close to plug in. Added model name to all models. Added option for ATX PSU support. These are the first three “final” versions of…
There are three ways to print this. As single piece :- Please download STL file but there wont be any movements. Multiple Pieces :- Download 3mf file with Full_dismantled.3mf. BEST QUALITY OUTPUT . Please use the 3mf file for assembly…
The is a MDT ACC Chassis Rear Bag Rider. Hardware: (2) Socket Head Screws 4mm x 10mm, (2) 4mm M-Lok T-Nuts Filament: PETG Black
3 Pin Male Plug IEC320 C14 Chassis Panel Power Inlet Socket Connector I designed this thing in order to have the most detailed 3d Model of my CNC electronics enclosure. It is fairly accurate and should do for future CAD models that need a…
Had some older unused mATX small size main boards, fully equipped. Before recycling, I saw a need of small linux based server. The original Midi Tower chassis with 400W power supply was quite some big piece of furniture for this…
Description: Build your own high-precision indoor air quality monitor! This project uses the industry-standard Sensirion SCD41 sensor paired with an ESP32 to track CO2 levels, temperature, and humidity. It is fully integrated with Home…
The Ropener is an open-source motorized curtain opener that retrofits onto your existing curtain rod. Silent stepper motor, ESPHome-native firmware, no cloud, no app required. Works with nearly all curtain types. WHAT IT DOES Pulls your…
Unleash Your Smart Home's Potential: Create a Custom Home Assistant Dashboard! Ready to ditch generic interfaces and control your smart home like a pro? This project empowers you to build a personalized Home Assistant dashboard using…
A simple wall mount for the Home Assistant Voice Preview Edition
For the most up-to-date parts, visit the GitHub project page . A 3D-printed, 4WD RC drift car. 1:28 scale, fits 90mm (M) wheelbase MINI-Z shells. Test drive: https://youtu.be/90DoZpYbfy4 U-joint closeup: https://youtu.be/g_EzM2HMQvg Note:…
A generic “gooseneck” style chassis for the USA Trains 40' shipping container. I use 2.5mm/ 3/32 inch steel rod for the axles. Landing gear can be positioned up or down with a bit of 2mm rod. NOTE: I PUT MUCH TIME AND EFFORT INTO DRAWING…
![eGPU Thunderbolt chassis for EXP GDC TH3P4 + ATX PSU [165x165x330mm - 9 liters]](https://media.printables.com/media/prints/429812/images/3562411_ec2f4b23-3b18-464a-bc88-986318650ad4/screenshot-2023-03-21-182821.jpg)
