153 models
Students create different prototypes of a bird feeder and discuss their models and printed results. Students combine 3D printed parts with wood, plexiglas and plastic trash.
Print approx. €2.22–€2.71 excl. taxPreliminary estimate for one variant
I had to mount a head on the body of a dressmakers mannequin for my wife’s tailorwork. I found this great model of a full-size voronoi head by Dinalab on printables - already sliced in two parts for printing- and added a base to the…
Print approx. €4.53–€5.53 excl. taxPreliminary estimate for PETGSource material: PET
Here we go again next project for the contest This velcro organizer is specially design to have the most necessary things always at hand. How many times you get in and get out the car? Tired of looking the most necessary things to take…
Added Three Layer STL's of each letter which can be joined in slicer or Tinkercad - the UPPER CASE letters are in a separate post There are two(2) postings of this font face: Lower Case - Letters that can be attached 2. Cap Letters to be…
Added Three Layer STL's of each letter which can be joined in slicer or Tinkercad - the UPPER CASE letters are in a separate Post There are two(2) postings of this font face: Lower Case - Letters that can be attached 2. Cap Letters to be…
My printer just couldn't cope with the original hands for some reason so I took the stl into blender and cut off the included supports and dropped the poly count because blender was having to guess too much. Now I can print these with…
Flexi Gecko from Kris Cyber with the eyes attached for a single print file.
MASE - the MiSTer Attached SATA Enclosure. This purpose designed enclosure houses a SATA to USB adapter and allows you to attach inexpensive and very large capacity 2.5 inch SATA hard drives and SSDs to your MiSTer. Supports 7 and 9.5mm…
Xbox Controller Stand with attached Masterchief figure. I printed this without supports but did notice a difficult bridge in Masterchief's helmet brim. Remix from thingiverse mastercheif bust: https://www.thingiverse.com/thing:3555805
i liked this model, but i needed to attach his legs
Just a simple lightbar that clips in under the front lip of the AMS unit, providing light through the glass top into the X1 printer. Printed in two parts (due to length), it has columns that slide into the void space either side of the…
Updated version which moves the flex fingers into a protected location. With this version the chalk drops in easily and uses the fingers bending in to hold it. With the solid ring on top it is much strong and kids don't break it as quickly.
I frequently move my Prusa Mini and prefer to have it in one piece. Please make sure that your Prusa Mini power supply unit is approximately 166 × 76.5 × 32.5 mm in size; otherwise it would not fit. Printer settings: Material: PETG, ABS,…
I wanted my modded Mini to be as clean as possible but with a possibility to store some frequently needed tools (like hex keys, nozzle wrench and spare nozzles) with it. So I came up with the idea of a glovebox style stowage device…
Standard plant pot with already attached planter plate. Can be also printed separately. Scale the model in Slicer :)
I needed a new home NAS to replace my old QNAP servers, so I built one using a Raspberry Pi CM4 with a CM4 IO board and SATA PCIe card. NASsie supports 2 '* 2.5-inch drives and 2 '* 3.5-inch drives. The case is completely 3D printed. This…
OnShape document link
This was designed for the Monarch Takedown Recurve Bow, but if your bow has an attachment point with holes spaced 34 mm apart, it should also work just fine. You will need (2) #10-24 x 1/2in screws/bolts. IMPORTANT: Printing the part in…
Gridfinity Magnet-Base Screw-Attached Shelf for use on a plywood backed tool wall. Holes sized and countersunk for #8/4mm wood screws.
I had an existing quick release mount from my normal camera tripod. But i needed a quick release base on my small desk tripod for usage of a dslr as webcam. With the print i can attache the existing camera mount (ground is round about…
This attaches a standard 1" sidewalk chalk to a broom handle. I have printed this in both PLA and PETG. Prints without supports. You screw the nut on from the bottom. As the nut goes up it will increase the clamping force on the chalk.…
Thanks to Shaggyx86 | Printables.com for the original design. Original design: LC Fiber Cap by Shaggyx86 | Download free STL model | Printables.com This remix was designed with the intent of creating a fiber cap that cannot be lost.…
Doweling jig for 2x4s. Make sure the jig is clamped in place securely before drilling your holes. The example picture attached isn't the best because I had used a forstner bit and the dowel holes ended up not being straight. For best…
Printed with PLA. Position it vertically. Used tree supports The knob from this remix fits this drawer
Prints best with no supports on the face of the model furthest away from the 3/8'' wrench.
I needed an iPad Mini 6 stand that would work with a Spigen Ultra Hybrid Pro case, and also wanted it to have enough of an angle to where I could use the iPad on my desk. This one prints with no supports and holds the iPad firmly in…
Holders are derived from several existing models ( mostly from @Stefi and @Rainer ), just adding some potential improvements… Advice: Don't keep it long on hot sunlight unless You drive!
This model is compatible with the lego system.
This is a tool and nozzle holder for the Flashforge AD5M enclosure kit. It has been designed to fit to the far left corner and positioned to fit to the Standard Enclosure panel screw places. You will need to change the original M4 screws…
I carelessly printed and struggled to fit the display case that I have remixed here, not noticing until I had ripped the OSD rocker switch off, that my display was not the one for which that case was designed. I therefore had to model…
STEP file available → here Print recommendations I recommend printing the Handle and lightbar in PETG or ABS since the handle should be a strong part and the LED tends to get pretty warm (PLA is not recommended because tends to deform…
*** Update 20th Mar'24: new option to add a 128x64 OLED in a wall. *** This project is for a 3D printed enclosure for a Network Attached Storage (NAS) device that uses a Raspberry Pi 4 using the Bullseye OS with two USB drives and running…
Recommended to print in 4 Walls, 20% infill in PETG to prevent breaks. Attaches to the top rail on the priming block using 2 M4 Socket head machine screws & nuts.
Modified the badge to have a lanyard hanger attached.
Claw Hammer holder for Multiboard. This holder uses Multiconnect connectors. Attached model has no embossed text. Works for any generic claw hammer from 16 to 20 oz This holder uses Multiconnect connectors. 2 of them is sufficient.…
A pair of stiletto heeled shoes for carbon 13 female model. (considering that it is such a drama attaching the ankle joint.... I have made extra ones with the joint already fixed. check the stl files....) I did not make them too pointy…
Parametric Funnel - Create pretty much any funnel size by changing a few parameters in Fusion 360. New to Fusion 360 or design software? Give it a go! This is easy and fun! And Fusion 360 is FREE for personal use. Example(s) attached.…
the original G26 holster, but with the clip attached
A model of the hyoid bone that I sculpted in Blender over an afternoon. Due to the variability in hyoid morpholog, it is highly likely that this model is not representative of all subsets out there. I tried to be as accurate as i could to…
my first upload here on this platform this is a remix of many designs and add the ability to have a blobifier script in the front of a closed Voron Trident. I have a Reaper Head and it's working very well. you have to adjust into negative…
I made this because all the other models needed screws and nuts to attach the rail parts, so I just attached them so you do not need the screws and it is a little more accessible Category: 3D Printer Accessories
This is a filament feeder, with a magnetic attached filter. It will feed the filament through your enclosure and filter any dust or particles from it. The magnets hold the filter securely in place, but allow a quick filament change. The…
This is a simple but effective clip that connects two Gardena hose connectors – keeping your hoses joined and your setup organized. What makes it unique? It includes a loop for attaching a string or zip tie , so you can secure it to your…
I made this remote control holder attached to the frame of light switch (for the always misplaced blind's remote control) and because I didn't want to drill or glue to the wall with the previous original remote control holder. It works…
Deku's mask attached to the Dummy 13 torso!
Captain America Shield. Nice and In perfect time to have printed out and Ready for those Avengers for Halloween. Post-Printing glue on magnets and enjoy. Category: 3D Printing
A remix of MASE to use the USB → SATA adapter that i had laying around here. All that i did I just cut the front to hold the adapter and closed the side hole on the original design. Link SATA adapter 3.0 (choose 3.0 on the box) →…
PETG, 0.2 res. Has m4 thread for standard cabinet handles. Fusion design file also included. Happy printing.
MASE XL - the MiSTer Attached SATA Enclosure. This purpose designed enclosure houses a SATA to USB adapter and allows you to attach inexpensive and very large capacity 2.5 inch SATA hard drives and SSDs to your MiSTer. This new XL version…
The hooks are pre-attached, so there's no need for superglue or additional assembly.
The title says it all. In the holder, the AirTag has about 0.5mm of space all around. If you'd like a tight fit, you can wrap it in a tiny bit of paper or similar. Printing should cause not problems as the parts are huge and have no…
This project is for a 3D printed enclosure for a Network Attached Storage (NAS) device that uses a Raspberry Pi 5 using the Bookworm OS with two USB drives and running the stable v7 version of the openmediavault software . The enclosure,…
LowRider v4 CNC - Buck Converter Tray for Ryan's (V1E) Jackpot CNC Control Box for the LowRider 4 CNC . A buck converter can be used to provide 12v to a 12v fan, even if your power supply is 24v. It can also be used to under-volt LED…
A knob designed for the cover of resin printers, but it can probably be used for a lot more. Designed so that your dirty gloves do not touch the surface of the cover as for classic handle designs. Designed to be mounted onto the 40x40mm…
This is a drill attachment vortex mixer sized for Formula P3/Citadel paint pots. Based on this design: https://www.thingiverse.com/thing:4586436
A couple of years ago I created a simple weather station using a M0 feather board and a TFT touch display to hang in our closet. We like to see the weather when getting dressed in the morning. My original mounting was just a bare piece of…
I remixed the original model so that the handle and bucket are one piece. Printed in PLA. 15% Infill. No Supports.
This simple and stylish toothbrush holder can hold 6 toothbrushes. Use 2 large command strip pairs to attach to wall. For printing, lay flat back side on the print bed, paint on support or support enforcer block over the 6 holes, use snug…
Voron PTFE Guide/Support - attached bottom of the extrusion
F1 MINI lego wallmounted holder
i made this jack o lantern with back plate attached for 4 12mm pixels you can also attach a full pumpkin back to it with the clips
I printed this in PLA, no supports or brim - with no issues.
A mount to attach with a ziptie.
This version increases the size of the flex fingers to allow for more grip on the chalk. I also modified to top to prevent threading the nut beyond the flex fingers. I suggest printing in TPU to allow for full flex of the fingers. If…
A large, print-in-place cauldron with handle at the request of one of my little witches! print top down on plate 0.20 mm layers, speed 10% infill minimum, your discretion supports from build plate (organic or add support enforcer on the…
I really like the design from geit_de but had some issue with my existing pair of scissors to properly fit in and while adapting and tinkering I started from scratch (based on the existing Idea). So here is just another approach — update…
Our pack had an "outlaw" class with no restrictions on wheels for the pinewood derby. Mine performed well except it wobbled due to the "axle" offset in the wheel. I had added the axle to give room to angle the axles. The version uploaded…
My take on creating a simple poop bucket for catching the poops of the Bambu Lab X1C series poop chute. This simply hangs at the table and catches all the poops dropping from the backside of the printer. As it isn't attached to the…
paint brushand water cup with with knubs on the bottom to help dislodge paint on the brush andwith a good base layer have yet to see it leak water in the water cup side print with 15%ingfill and you should be fine
A holder for paintbrushes or whatever else fits in 15 MM holes. It's designed to attach to Multiboard using flush snaps and small bolt lock screws (not the mid thread bolt lock screws). I printed it without supports in PLA, but it should…
Zip tie attached hose adapter for the FX 4 Stage PCP Air Pump or the identical Gehmann M100 4-Kolben compressed air pump. The hose holder can also be mounted without a cable tie, but then it might slip. The adapter should fit all pumps…
This is meant to attach to the printer with the stock, front left bed screw. There is a M3 nut in the camera mount point and I used a M3x50mm screw to connect it at the base for added support through the shaft. It's easy enough to make…
I got an i3 frame to build a printer, unfortunately the holes where drilled to big so intended M3 bolts would not fit, at first I used nuts on the back but they tend to fall of and they don't look that nice, therefore I had to edit…
The original model was very nice and low profile, which I love – but I have a whisker biscuit on my bow, so that prevents use of two of the arrow slots - and on my riser (PSE Pro Max), the backs of my fingers make contact with the arrows,…
You will need a L-shaped steel-rod hook with a thread at the end
Sovol SV08 Parametric magnetically attached Enclosure The main design goals were following: the panels must be quickly removable (for printing PLA and for doing maintenance on the printer) the printer itself remains unmodified (no…
The Compartmentalized Rhombic Dodecahedron with Attached Base builds on the elegance of the original design with a seamlessly integrated base for stability and display. This enhanced version prints beautifully, quickly, and support-free.…
Balloon racer with simplified air ducts and axles + exhaust mouthpiece added for easy inflation with balloon attached.
For a bosch routing table. This insert has a 42 mm opening. This gives about a 6 mm clearance on a 30 mm corner bit that I have. As a CAD exercise I made the bottom have ribs for strength like the OEM insert (red one in the picture). Mine…
My other design is great for people who know what they do. For those that are new to the game, it is to complex to operate. So for the rentals we wanted "grap and go". The trade-off is the piece that remains onto the rail. At least it…
Hello, I had an Orbiter 2.0 with the filament sensor add-on, and I needed to add strain relief for my umbilical. I could not find an Orbiter 2.0 strain relief model that added a port to accommodate the Orbiter filament sensor wire…
Storage that mounts using the lid of the Bambu P1S and X1C. Mounts uses the weight of the lid to stay in place.
Soldering iron tip cleaner holder. You can use steel wool or brass tip cleaner inside. There is option to attach it to table to avoid moving. Attaching os possible via 2 screws 4mm thread with flat head (f.e. SPAX). I reccomend PETG to…
Roofing Hammer (German design) holder for Multiboard. This holder uses Multiconnect connectors. Attached model has no embossed text. This holder uses Multiconnect connectors. 2 of them is sufficient. Multiconnect is much stronger than…
A 4-rack DAS fitting 3.5" and 2.5" drives - mostly for HDDs but works for SSDs too! This thing is lit - multiple months of operation and no downtime. I have it plugged into a 2013 Mac Pro where it performs great. Extremely cheap, less…
A nice way to keep keys and organized near your door: Hang them below your favourite picture frame! Benefits: prints fast, shouldn't need support material (even the overhang, just try it) no additional holes in the wall / sticky tape on…
Support structure for the plant. The printed piece attaches to the pot. Edit the sketch to fit to your specific pot by entering radius, brim width and height you want for the suppot. Edit 6.17.2022: Added curved design, also parametric.
Light box for use with lamp kit and standard light bulb sized lights. uses magnets to attach and detach grid. I used a Philips A19 smart bulb so i can change color, intensity…etc. also used the lamp kit link below for the power. I didn't…
the original model, but just inverted to be for a right handed person because the original is for left handed people.
Printable with PLA, PETG, etc. Originaly created to fix a broken pin in a Hyundai i20, it can be used for any other purpose. I printed it with a 0.6 nozzle and variable layer height Scale it up or down to your needs. Attached the blend…
F35 with fins attached. Meant to be resin printed, but can be printed with PLA. Less engine one has a shorter depth for the hole in the back.
Mounts to the side using screws, when installed, the box is sealed.
Rails with attached sights for those who don't much care about removable sights. Like Silly's original sights, 1.75 mm filament can be stuffed in the holes. To me it looks great and no rattle!
Strong velcro attached hook for e.g. keeping a shopping bag in place in a car trunk. I use this in my Model Y (Berlin) trunk where the walls are covered with velcro loop fabric type material. Two different variations: The deep hook for…
Duster holder Attached to white Board with Marker on it.
for use with p3 with Neewer adapder ring Category: R/C Vehicles
This is a sketch for a flexible airpods case with a pocket for an Airtag.
If you raise the height of your Kivik sofa using something like this: You'll need a pair of these for the chaise. The model is for 6" legs. Slice to whatever height you need.
