Search results: beds

Sort order

541 models

P
PrintablesmoWerk

Bedside shelf and phone holder - fits 3cm boards

Bedside shelf that fits 3cm boards in the base version. Please ask for a fitting model for your bed board size. The phone holder slot is 18mm wide and should fit most phones even when using thick casings like the leather one shown in the…

Downloads
210
Likes
37
Rating
5
P
Printablesphilipp900

bedscraper

I know there are similar bed scrapers here but I wanted my own one I designed so here it is feel free to use it and make remixes

Downloads
173
Likes
13
Rating
0
P
PrintablesSeabird HH

Bedside Lamp (Box), LED 12V, 2.5W

Based on "PLAzzy, 12V LED Dog Lamp" https://www.prusaprinters.org/prints/20323-plazzy-12v-led-dog-lamp I designed this bedside lamp. I have tried to capture the working steps and the assembly in photosl For this project you will need: 1x…

Downloads
78
Likes
28
Rating
0
P
PrintablesHenk

Ikea Nävlinge as light for bedside reading

I recently purchased two Ikea Nävlinge lights for bedside reading and loved their sleek design and ease of installation. However, the light was too intense for my taste, and it disturbed my wife while I was reading. The lamp emits 220…

Downloads
59
Likes
13
Rating
5
P
PrintablesDJ

Auping Auronde bedside caddy

Great for : tissues, phone, remote, nasal spray, small book, keys, small trees and melons. Print parameters Printer : Prusa Mini+, FW 6.1 Material : PLA Nozzle : 0.4mm Layer-height/profile : 0.2 mm speed Supports : none Input shaper :…

Downloads
45
Likes
9
Rating
0
P
Printablesphilipp900

Bedscraper more detailed

i wanted a more detailed and good looking bedscraper with rounded edges and better stability so it feels also better in your hand!!! its also on makerworld if your interested supporting it there too!!…

Downloads
27
Likes
4
Rating
0
P
Printablesgimpelginster

Bedside Table with Construction Bricks

Material filament 2x wood board (20mm thick, 200mm wide, variable length) 8x wood screw some construction bricks (LEGOs) Assembly Place the two equally long boards onto the 3D printed parts and screw them in place from below. Next: build…

Downloads
21
Likes
23
Rating
0
P
PrintablesPedroHBraga

Honeycomb Storage Wall - 235 mm × 235 mm, and 220 mm × 220 mm - Adjusted to maximize the usage of print beds from the AnkerMake M5 and M5C printers

The files here maximize the usage of the print bed from the AnkerMake M5 (235 mm × 235 mm)) and M5C (220 mm × 220 mm) printers to print the honeycomb storage wall. New to the honeycomb storage wall? Look Honeycomb storage wall by RostaP ,…

Downloads
3,370
Likes
1,030
Rating
4.71
P
Printablesmystastian

Parametric Bedside Phone Holder - Customizable for Any Phone & Bed Frame

Keep your phone within arm's reach — no nightstand needed. This bedside phone holder hooks securely onto your bed frame and holds your phone upright in a sleek honeycomb pocket. Grab it in the dark, charge it overnight, done. Fully…

Downloads
1,679
Likes
680
Rating
4.6
P
PrintablesBeiro Falone

Bedside Caddy

I designed this organizer to sit on a bedside table, to hold a phone, a smart watch charger, an e-reader, and with a small drawer for things like earplugs, chapstick, etc… The caddy itself is 6.75" deep, 5" wide, and 2.625" tall. The…

Downloads
989
Likes
605
Rating
5
P
PrintablesRad Nerd Works

Bedside Cup Holder

I designed this so my kids could have a cupholder right next to their bed without having to have a table there. I designed the dimensions to clip onto their bed frame. It would be an easy remix or re-scaling to get it to fit your bed…

Downloads
803
Likes
181
Rating
4.67
P
Printablescompy

Universal bedside phone shelf

Hi, this is a bed-side phone shelf nothing else, enjoy

Downloads
632
Likes
256
Rating
5
P
PrintablesRandallChua

Laser Cutter Piece Holder for Honeycomb Beds

I tried a few other prints like this but wasn't happy with them so I ended up designing my own version. There are 2 lengths. A short and a long depending on the thickness of the material. There's only about 3mm difference in length for…

Downloads
595
Likes
58
Rating
4.8
P
PrintablesAuzze

Creality K1 Speedy Lid and heatbeds holder

Quick mod to store your extra heatbed plates and the lid. Not sure if it with work on a K1 max.

Downloads
582
Likes
86
Rating
5

Bladeless PC Noctua 120mm Fan for Workshop, Desk, and Bedside Use

WORK IN PROGRESS This is a fan housing that holds one or two 120mm x 25mm fans. Five choices of Air Directors Two sizes of base for single or double fans Adjustable direction on the two smaller tops Three sizes of ring (Dyson) style tops…

Downloads
550
Likes
168
Rating
5
P
Printablesmkeehn0101

Subwoofer model, but cut up to fit on Bambu printer beds

Also included STL's in case others didn't want to deal with the .3mf file.

Downloads
538
Likes
62
Rating
0
P
Printablesmaker-dad

Filament Boxes as Storage Mounting Solution (split model for smaller beds)

Add storage while reusing empty filament boxes with a scalable, wall-mounted solution. For peace of mind, I mounted the top holders with screws and then used command strips every other which has held up well so far. Each bracket includes…

Downloads
523
Likes
387
Rating
5
P
PrintablesDruckbar

YALT - Yet Another Leveling Test - Large Beds

YALT - Just an easy way to check your leveling capabilities. Got everything tuned in? Perfectly assembled machine? PID and input shaping done? Beautiful mesh created? Slicer settings done? Superior bed adhesion? Then throw this leveling…

Downloads
489
Likes
13
Rating
5
P
PrintablesSzymonRychter

WALL/DESK CLOUD LED BEDSIDE LAMP

Arduino code on GitHub: https://github.com/SRRychter/Cloud.git

Downloads
470
Likes
128
Rating
5
P
PrintablesRaphael

Bedside lamp lamella

Bedside lamp, a matching ceiling lamp is in my profile. I created a lampshade based on the Zuzanna Lamp by LeFabShop, as i liked the idea but wanted something with a little bit more hight for a ceiling lamp. Translucent if printed with…

Downloads
453
Likes
132
Rating
5
P
Printables3DPrintBunny

Bedside Bookshelf

A bookstand to go on your bedside table that holds the next five books you are planning to read. What shall I read next? Easy to print with no supports @3DPrintBunny

Downloads
429
Likes
212
Rating
5
P
PrintablesHerrWu

BTT ADXL345 / S2DW Bedslinger Mount

A simple, single use mount to hold a Bigtreetech ADXL345 or S2DW accelerometer for input shaper calibration of the Y-Axis on bedslinger printers. Print in the center of the bed, then attach the sensor. Print with Brim for extra bed…

Downloads
381
Likes
35
Rating
5
P
PrintablesGuZZLo

Bedside table

I had to make a bedside table for my wife, but she didn't think it would work with a 3D print. So here it is. In the picture I printed a special version just for a magsafe charger, but there is a clean version included, and a STEP-file.…

Downloads
374
Likes
117
Rating
0
P
Printablessquirrelf3d

ADXL345 (generic type) - Y axis helper ( for moving bed type printer aka bedslingers & klipper )

For one of the most common generic type of ADXL345, see picture (15mm screw hole distance and about 20x16mm PCB dimensions) Print the M3x4 or M3x6 model, once the print is done, set the bed to stay hot (don't let it cool too much or…

Downloads
373
Likes
51
Rating
4.86
P
Printablesjustdanok

Bedside Hanger Basket

Fits ideally over beds with a 22mm edge.

Downloads
343
Likes
105
Rating
5
P
PrintablesEnely

Bedside Table

Bedside table sized for Sylvanian Families or Playmobil. Designed to fit with my bed & bunk bed . The book can be found at PrusaPrints The cartoonish alarm clock in the picture can be found at Thingiverse Read more about ongoing work at:…

Downloads
341
Likes
92
Rating
5
P
PrintablesSignum

Bedside phone holder

Lightweight and sturdy phone holder to put between bed frame and mattress.

Downloads
331
Likes
130
Rating
0
P
PrintablesPeter H

BEDSIDE TABLE - NIGHTSTAND ( PRINT-TABLE #1)

OVERVIEW This is the first prototype of a series of furniture pieces developed around a “construction kit” philosophy, in which printer-sized components can be simply assembled with minimal experience to create customised furniture…

Downloads
326
Likes
247
Rating
5
P
Printables3DPrintBunny

Bedside shelf

A small bedside shelf to hold glasses, pods, watch etc. The shelf is telescopic and is secured by the weight of the mattress. Prints easily with no supports Comes with 2 trays one solid and one with a hexagonal mesh base. Loads more…

Downloads
304
Likes
108
Rating
0
P
Printablesamy

Bluey & Bingo's Beds

This is a well made, cute little bed that fits together great (thanks cassidyjames). I reduced the headboard height slightly from the original and put the B and b details on the end of each bed. I also added a pillow to the mattress and a…

Downloads
302
Likes
85
Rating
5
P
PrintablesMountainstorm

Magsafe Bedstand

Vase inspired phone stand for an off brand MagSafe charger. Print with support face down e.g. MagSafe slot facing the bed. Took 3hrs on my P1S at 0.28mm and 5% support. If you want to add weight make sure you use grid infill and you…

Downloads
297
Likes
51
Rating
4
P
PrintablesDaniel Ryan

Bedside Table Organizer

I wanted the bedside table catchall from the thumbnail of the catchall contest, but it didn't seem to exist, so I made it! A few small modifications to fit the shelf in my headboard, and a spot to put spare change, or in my case, earplugs…

Downloads
292
Likes
72
Rating
5
P
PrintablesIchBinRooster

5 Gallon Bucket Hydro Tower For Smaller Print Beds

This page will be dedicated to a cut-down version of my 5-gallon bucket hydro tower. I have uploaded all of the other tower files to this page, if something is a bit too big, let me know so I can work on it. This will allow users to print…

Downloads
287
Likes
53
Rating
0
P
PrintablesMrTdesign

Multi‑Purpose Bedscraper Tool — 6 Versions: Std & HD

A versatile scraper tool for multiple uses. Compact and easy to handle, this tool removes prints and residue from 3D printer build plates, keeps general surfaces clean, helps with sticker removal, and can even serve as an ice scraper. Its…

Downloads
267
Likes
24
Rating
3
P
PrintablesGreybeard3D

Print beds for the Tiny Prusa i3... aka Prusa Mk3XS

These tiny print beds are for the Tiny Prusa available here: https://www.prusaprinters.org/prints/146-tiny-prusa-i3-printer by Dominik Císař. I recommend you use my gcode made for the Mk3S but should also work on the Mk3. If you don't use…

Downloads
266
Likes
45
Rating
5
P
PrintablesTeque5

Fitbit Sense / Versa 3 Bedside Charging Bracket

Simple bracket for the Fitbit Sense to sit between the bedside table and the bed without any wires. Charger clicks into place with USB cable going out bottom and the bracket has a built-indentation for “Medium” 15x60 mm 3M Command…

Downloads
266
Likes
39
Rating
5
P
Printableseddyjay

Bedside Shelf for Bunk or High Beds

My daughter sleeps in a High bed, and therefore hasn't any nightstand to put the alarm clock. So I made a small shelf that fits on the sideboard of the bed. I printed in PLA but split the piece in half and then glued, just to prevent…

Downloads
259
Likes
98
Rating
0
P
PrintablesPrinterfreak

Bed Level Adjustment Tool - 220x220mm Beds

This 3D Model is always helping me out even if i use a Bed Level Sensor to get the perfect first Layer. You can Stop the print after the First Layer its just heigher for better view. Filament: PLA, PETG, ABS, ASA Layerheight: 0.2mm

Downloads
232
Likes
12
Rating
5
P
PrintablesChuck Sterling

CatchAll for bedside

Printed in two sections not requiring support, with interference fit that also negates glue. I printed the example at 0.28 layer height with two walls and 20% infill. I think it would be better at 0.20 layer height with four walls. Later…

Downloads
231
Likes
97
Rating
5

Bedside Yoto Player Holder

Yoto Player Holder that fits over a standard bunk bed frame. I printed in PLA+ at 50% infill. Unfortunately, support is needed to print the lip which goes over the bed. Even with the support and 50% infill, though, this printed in about 1…

Downloads
214
Likes
16
Rating
0
P

LowRider 3 CNC YZ Plates for Smaller 3D Printer Beds

Split YZ plates for printing on smaller beds like the Ender 3 Pro. The intent here is to print these plates, join them with some type of strong 2-part epoxy, and use these temporarily on the LowRider 3 CNC to mill final YZ plates out of…

Downloads
213
Likes
15
Rating
5
P
PrintablesLxL3D

1:6(Play/Fashion) Scale Doll House Bedside Table NO SUPPORTS

1:6 scale bedside table. suitable for barbie sized dolls, or other dolls that fall in the 1:6 Fashion/Play scale. Model designed to be printed with no supports, and fitted together once printed and painted to your liking. Other 1:6 scale…

Downloads
208
Likes
91
Rating
0
P
PrintablesChipp Walters

Samsung Fold 3 stand for uneven surfaces (like beds)

Wanted to use my Samsung Fold 3 while sitting up on my bed watching TV and needed a stand which would work on the sheets and covers without falling over, so I designed this. Printed in Prusament PLA with .4 nozzle and .3 layer height on a…

Downloads
206
Likes
32
Rating
5
P
PrintablesCash Lo

Bedside Gadgets Holder

Simple fully customizable bedside organizer for holding gadgets, from one phone to a whole family of gadgets. Print Settings Printer Brand: Ultimaker Printer: Ultimaker 2 Rafts: No Supports: No Resolution: 0.3mm Infill: 20% Category:…

Downloads
205
Likes
50
Rating
0
P
PrintablesThorb

Bedside Buddy Bin

When the “big cold” hits, used tissues start piling up everywhere. Lying in bed, there’s usually no trash can nearby, and soon the tissues begin to stack up on the nightstand. This isn’t very pleasant, hygienic, or nice. It’s even…

Downloads
205
Likes
190
Rating
0
P
PrintablesAda Cohen

Heavy Duty Bedsheet Hooks

I have tried a lot of solutions to keep my fitted sheets from popping off of my bed. I guess I toss around a lot at night, because they just do not want to stay on. Getting an adjustable bed seemed to make the problem even worse. I find…

Downloads
191
Likes
48
Rating
0
P
PrintablesBrian Hedrick

Bedside Phone Holder

A simple but elegant bedside or office table phone holder! Accepts both Landscape and Portrait positions for any phone.

Downloads
191
Likes
20
Rating
0
P
PrintablesMINUS_Stl

FT EMS SWC V2 for Smaller Print Beds

This is a remix of Fizzy's EMS for the Ender/Switchwire conversion. It's been modified to print on smaller bed sizes (200mmx200mm minimum). Modifications include: Main section split into 4 smaller sections (PSU main, PSU subframe,…

Downloads
191
Likes
41
Rating
5
P
PrintablesSirHair

Wrights Flyer 1903 - split for smaller beds (Prusa Mini+)

Fantastic original design by Julien Jeanroy - May 21, 2019. My printer was too small and scaling the model down ended in disaster. I split the model and with only two dabs of super glue you can have the flyer on a smaller bed. Connection…

Downloads
190
Likes
34
Rating
5
P
Printables3DDIY

Bedside Lamp and Book Rest

Not an original design. I saw something that was way overpriced and thought i can recreate it with what I had on hand. This light is shaped like a house. Where you can rest your book face down to make a roof holding your page where you…

Downloads
189
Likes
65
Rating
5
P
PrintablesAkarrin

Yoto Mini holster bed hook (IKEA beds)

Fits the Yoto Mini in its protective case. The width of the hook fits IKEA beds and bed bars (20mm wide)

Downloads
189
Likes
18
Rating
5
P
PrintablesPeter Martin

The Mag-Dock Pulse - Magsafe Bedside Charger

MAG-DOCK PULSE Bedside Mag Safe Charger Stands for iPhone standby mode. There are currently 4 versions to choose between, depending on the charging puck you currently have. Mag-Dock Pulse - Iphone NEW Puck - for use with the new charging…

Downloads
186
Likes
56
Rating
0
P
PrintablesAndré Falcão

Mice and Mystics insert for small beds

This is a remix of MysteryDough's Mice and Mystics insert to fit on Flashforge Finder's bed. It stores all pieces in four boxes that will fit inside the game's box. All boxes have a maximum width of 140mm. Update: I've uploaded a new…

Downloads
183
Likes
27
Rating
5
P
Printablespressi

Flexible Razor Blade Scraper for 3D Printing Beds

A simple yet effective tool designed to make cleaning your 3D printer build plate faster and safer. The flexible handle provides just enough give to help remove stubborn print residue or thin first layers without damaging the surface.…

Downloads
181
Likes
40
Rating
5
P
Printablesjodo

Shelf (bedside table) for Ikea Småstad loft bed

A small shelf that fits perfectly as a bedside table for the Ikea Småstad loft bed. The model include the base and a border that you glue on top so that things don't fall down. There are models for a left- and a right hand shelf depending…

Downloads
180
Likes
48
Rating
5

M-O bedscrapper prototype

Based on Wall-e companion M-O scrap your bed with style. Supports required Shaft is 3.4mm vertex to vertex, so you can create your own adjusting tolerances if needed. Enjoy it as much as i did designing it and STAY CLEAN!

Downloads
177
Likes
199
Rating
0
P
PrintablesTarz

Azul Gameboard Overlay for Smaller Print Beds

his is a remix of guiosca's simple gameboard overlay which I found excellent for its simplicity, speed of printing, and ability to print on a smaller format print bed. The changes are small. I increased the thickness 0.3mm to provide a…

Downloads
173
Likes
21
Rating
5
P
Printablesrclauss

Toy House Bunk Beds

Stackable beds and an awning that I made for my daughter's doll house. Can be used as bunk beds or a single bed

Downloads
172
Likes
33
Rating
5
P
PrintablesTaffoFox

Prusa Mini Y-Axis bearing holder (For non-standard clone beds)

This model is intended to fit Prusa beds that are non-standard, usually the ones that come in clone kits. They are longer, however they still work as normal with most Drylins/LM8UUs. I printed and designed this with ABS so tolerances may…

Downloads
170
Likes
15
Rating
5
P
PrintablesMY

Bedside 3x Remotes/Phone Holder

New: Remotes_Plus_Phone_Holder_V1 [ OnShape Model ] Holds 3x remotes + phone Extra mounting point at the bottom Remotes_Holder_V3 [ OnShape Model ] + Chamfer to support top bevel printing + Better transition between basket and top

Downloads
170
Likes
40
Rating
5
P
Printablesgaudystead

3D Printable QR Codes for 3rd Party Bambu Lab Print Beds

So… I don't have a label printer or a conventional 2D printer for paper… but I've got a 3D printer! Let's continue the age-old trend of 3D printing upgrades for printers by getting them to print QR codes to fool the Bambu Lab printer into…

Downloads
169
Likes
15
Rating
0
P
Printableshappyclayton

Bedside Corner Shelf

This is a bedside corner shelf designed particularly for those with cabin beds or similar, making a traditional bedside cabinet impractical. It has two shelves and a slot designed to hold a kindle. There is cable routing to both shelves…

Downloads
167
Likes
46
Rating
5
P
PrintablesCarlos Alberto

3D DESIGN OF BED RISERS FOR ROUND-LEGGED BEDS

This 3D design, created by me, is a set of bed risers specifically designed to elevate round-legged beds off the floor. The purpose of this design is to allow robot vacuums to pass underneath the bed or facilitate cleaning tasks. The bed…

Downloads
163
Likes
13
Rating
0
P
PrintablesIlana H

Bedside/nightstand storage organizer

This is a 23cm x 21cm storage container for your home or office. I designed it to keep my stuff from falling off my nightstand. It is adaptable if you would like to make changes to fit your lifestyle. Updated: I added a smaller version…

Downloads
156
Likes
27
Rating
0
P
PrintablesBartosz Wilk

Xiaomi camera C300 bedside bed frame holder

Xiaomi camera C300 bedside holder layer height: max 0.2 mm material: PLA, PETG, ASA/ABS Print with supports if the bed frame is too narrow, you should add felt pads. Feel free to remix

Downloads
152
Likes
25
Rating
0
P
PrintablesMagichobos4321

BedSide Catch All Tray

About: This is catch all tray I designed with some patterned sections. Alot of the other trays seemed kinda jank or bland so I wanted to see if I could do better. The tray itself has 3 flat slots for keys, wallet, sunglasses, etc. and in…

Downloads
148
Likes
42
Rating
5
P
PrintablesTangado

Malm Bedside Table (old Dimensions)

A Table that fits the old Malm Bedframe (50*75mm). Prints on the Side without Supports, scale Z to your personal preference.

Downloads
146
Likes
27
Rating
0
P
Printablessntrenter

8 inch phantom printing press with print settings and beds layed out.

all credit to the original designer , I just sliced up the model in bambu so it's a littler easier to print and get started, I also consolidated the materials list so it is less easy to procrastinate. --- print settings build guide —…

Downloads
145
Likes
31
Rating
0
P
PrintablesNed Lex

Xiaomi bedside lamp moon cover

This is a 3D model of a moon lamp cover that is designed to fit over a Xiaomi bedside lamp. It is made of PLA filament and has a realistic texture and color of the moon. It has two versions: one with a hole at the bottom for the cable and…

Downloads
145
Likes
40
Rating
0
P
PrintablesPavel E

BedSheet Clip

Easy clip for bed sheet

Downloads
141
Likes
12
Rating
0
P

EdgeMate BedShelf

The EdgeMate BedShelf is a sleek and practical bedside solution designed for minimalists and small-space enthusiasts. Perfect for holding your essentials—like your phone, book, or drink—this compact shelf clips securely onto the edge of…

Downloads
140
Likes
70
Rating
0
P
PrintablesFFW

Hanging basket for bunk beds

Little Bed Side Box for Bunk Beds. It has a size of around 144x80x80mm You will get best stability, when printed on the side, if you have filament with good layer adhesion, feel free to put it on the botton to reduce filament usage for…

Downloads
139
Likes
22
Rating
5
P
Printableskiwi

suwem高低床杯架 Bedside Cup Holder

女儿的高低床没有合适的杯子架,特地设计了一个,再不用担心猫会把杯子子打翻了。

Downloads
139
Likes
16
Rating
5
P
PrintablesToni

Basic bedside table in two versions

I printed in PETG and 10% infill since it does not has to face higher weights. Also i added a small cable passthrough. I made a V2 (also included) with less material used and basically same strentgh.

Downloads
134
Likes
44
Rating
0
P
PrintablesSeabird HH

Bedside Lamp (Tube), LED 12V, 2.5W

This is a further development of the bedside lamp with the box shape https://www.prusaprinters.org/prints/20852-bedside-lamp-box-led-12v-25w . Now this lamp had become a tube shape and you can print the backside as switch or dimmer…

Downloads
134
Likes
31
Rating
5

Bedside Cup Holder

This cup holder fits well onto a bedside wooden rail that is around .75" deep. Material: PLA Infill: 25% Wall Thickness: 4x

Downloads
133
Likes
19
Rating
0

Bedside Caddy ( Samsung Watch Remix)

Just follow the original instructions to print it: Print caddy on its back. Print drawer in its working position. (Supports may be needed deppending on your printer overhang capabilities)

Downloads
128
Likes
23
Rating
5
P
PrintablesTooly

bedside cable holder

this is a simple model I whipped up for a friend, though id might as well share it here. should be glued with double sided tape or anything really. hope this helps!

Downloads
123
Likes
30
Rating
5
P
PrintablesRikimanto99

bedside table for Ikea STORÅ bunk bed

bedside table for Ikea STORÅ bunk bed printed in PETG 60/70 % infill

Downloads
122
Likes
27
Rating
5
P
Printablesmason9-jumpy

Bedsheet, dryer anti-tangler

This tool helps keep bed sheets from tangling during drying. It's 3D printed in TPU, making it flexible enough to withstand the tumbling and heat of the dryer. Simply insert a sheet corner into each of the side holes and place the center…

Downloads
121
Likes
10
Rating
0
P
Printablesgimbogandalf

Bedside Tray

This is a bedside tray that is mounted on the bed side rail or guard rail. Tray size is 180X200mm Rail width is 28.3mm (+ 0.2 tolerance) Better to print on the side to increase strength and avoid supports Print Settings Printer Brand:…

Downloads
120
Likes
21
Rating
0
P
Printablesprint3dcy

Lana Bedside lamp

This is a copy of the Lana from Netflix's series "Too hot to handle". The design was made from photos of the real Lana, so the dimensions may differ from original. The assembly consists of 3 parts: 1)Bottom part 2)Transparent part 3)Top…

Downloads
120
Likes
6
Rating
5
P
PrintablesDaire O Connor

Bedside phone and glasses holder

This is a simple wall mountable phone and glasses holder that can be easily mounted using double sided tape to any flat surface. It will easily hold any modern smartphone in a easy to access location along with a pair of glasses or…

Downloads
119
Likes
25
Rating
0
P
PrintablesDockGuy

Mk3 style Y belt holder for Prusa Mk2.5 / Mk2 / Mk2s [Mk42/Mk52 12v heatbeds]

Edit: Don't bother with this. Instead use Prusa's new Mk3s 2-piece design with integrated belt tension adjustment which will work on Mk2 and above printers. See "Y-axis parts: here:…

Downloads
118
Likes
7
Rating
0
P
PrintablesHealow

Magsafe Bedstand "fixed"

The model from Mountainstorm looks very good, but the mount was a bit too big, so I designed an adapter plate to hold both the original and third-party magsafe chargers. This allows you to spice up the stand with a contrasting line around…

Downloads
118
Likes
24
Rating
0
P
Printableskuldar

Print bed holder for 3 beds

Remix of a perfect holder by Jacob Bryce. I had a need for smaller holder so decided to remix, download and enjoy!

Downloads
117
Likes
17
Rating
5
P
PrintablesDelukart

Ikea malm bedside pocket

i needed a pocket to hold my apple controller and other things on my side of the bed where there is no room for a table. easy print with no supports . Print Settings Printer: custom cartesian Rafts: No Supports: No Resolution: 0.30…

Downloads
116
Likes
30
Rating
5
P
PrintablesJonathan Vester

Hexagon Bedside Cell Phone Holder

I really liked the original model. But like others, I wanted one with hexagon cutouts. Thanks for the base model. Printed in Polymaker Light Green PLA Pro.

Downloads
116
Likes
14
Rating
0
P
PrintablesLeeprechaum

Bedside table for dolls

Bedside table in 1:12 scale for doll houses. The fit in the drawer is kinda loose for commodity. Body is to print on its back with supports on the legs. Drawer is to print it on its bottom. 45 mm l x 30 mm w x 50 mm h

Downloads
113
Likes
30
Rating
0
P
Printablesmshipman

Parametric Twist Canister (Bedside/Travel Earplug Holder)

One evening while dropping my earplugs repeatedly whilst trying to get into bed (which are IMPOSSIBLE to recover quickly if you're sufficiently nearsighted, by the way) I had the idea for my ideal earplug container which would be easy to…

Downloads
113
Likes
25
Rating
5
P
Printableshobby_grade

Bedside Phone Pocket

Tired of rolling over your phone when you charge it in bed? Do you use your phone as a remote to your TV and get tired of losing it in the sheets? Don't have a night stand? Well this bedside phone pocket is just for you! Designed to fit…

Downloads
110
Likes
20
Rating
5

Bedside Table, Wall mount, with glasses holder

Bedside table that wall mounts with 3 screw holes. Includes and under shelf glasses holder

Downloads
110
Likes
22
Rating
0
P
PrintablesDavis543

Bedside lamp

You need to have 2.5 metr of light strip and some smart controller. And when you will print a smooter you need to turn on vase mode and walls to 0.4mm.

Downloads
109
Likes
29
Rating
0

Corner protector for bedside tables .

Corner protector for bedside tables . Simple corner protector, with two possible sides, one straight and one rounded. For 22.5 mm ikea type wood. **add model with 3cm x 3cm Make it in flexible material, as it has some cons to stay gripped…

Downloads
109
Likes
16
Rating
5
P
Printablesk2thestank

Speed Cycle Test 300x300 beds or bigger

Self created speed and acceleration test for large beds 300x300 beds only this file is 250x250 Category: 3D Printing

Downloads
106
Likes
9
Rating
5
P
PrintablesRandyNH

CPAP Bedside Shelf – Nightstand Organizer

I designed this shelf to keep my CPAP machine and alarm clock organized on my nightstand while minimizing clutter. The top shelf supports the CPAP machine, while the lower shelf provides a dedicated space for an alarm clock or other small…

Downloads
102
Likes
29
Rating
0
P
PrintablesRokapet

Bedside holder for Apple Ipad 10.2"

Holder for Apple Ipad 10.2" (Gen 7th-8th-9th, AFAIK other models have different dimensions that migth not fit or fall out from this holder), that can be attached to the bedside, handy for putting away your Ipad when you got to sleep. Made…

Downloads
101
Likes
22
Rating
5
P
PrintablesMakeMeACake

Paint Shield - 220mm length (prints on most beds) - better than store bought!

This is my first design where i wanted to make a product better than i could buy in the store but that most people could print on their own 3D printer. The paint shield has been designed with the following features: -Razor Sharp Paint…

Downloads
100
Likes
9
Rating
5
P
Printablesmeub

Bedside storage and charging station for iPhone, Airpods and Wallet

This is a modified version of PjotStrog's Magsafe charger with an additional AirPods charger and wallet storage. It's specifically made to store/charge the following items: iPhone 13 AirPods (2nd-Generation) Saddleback Leather Wallet…

Downloads
100
Likes
33
Rating
5
P
Printablesbillieillib

Creality K1 Speedy heatbeds holder with out Lid

A place to store your extra heat beds

Downloads
100
Likes
14
Rating
5