454 models
Simple clips to mount a breadboard to a DIN rail. Made to fit with the foam backing still on the back of the breadboard. Also check out my other DIN mounts on my profile :-)
Print approx. €0.24–€0.29 excl. taxPreliminary estimate for one variant
If you've ever soldered header pins to a board, you know it's a pain to get them straight. You can stick the board and pins into a breadboard while soldering - that usually works. But if your board only has pins on one side, the other end…
Print approx. €0.05–€0.06 excl. taxPreliminary estimate for one variant
I have included my files, but your conditions may vary. With a large model, I found it useful to print with a draft shield.
Print approx. €7.35–€8.98 excl. taxPreliminary estimate for one variant
Same as the original, but with some relief for the power button.
Print approx. €1.38–€1.68 excl. taxPreliminary estimate for one variant
Connection Box for Wago 221-420 to Breadboard – Sensor Integration This enclosure provides a clean and robust interface for routing multiple sensors via three Wago 221-420 (10-slot) connectors into a 400-pin breadboard (84 × 55 × 8.3 mm)…
Print approx. €5.44–€6.65 excl. taxPreliminary estimate for one variant
The Arduino Mega mount includes 6 screw bosses for M2 8mm screws (or shorter). The breadboard slot has slots for the breadboard-to-breadboard attachment catches.
Print approx. €3.54–€4.33 excl. taxPreliminary estimate for one variant
Printed in PETG at 0.15 mm with a 0.6 mm nozzle
Print approx. €2.77–€3.39 excl. taxPreliminary estimate for PETGSource material: PET
My version of a breadboard holder for the amazing gridfinity system, as I wanted to use gridfinity to organise my whole electronics prototyping space. This bin has space for a 830-hole breadboard (JUST fits..), and a range of bits in a…
Print approx. €6.22–€7.61 excl. taxPreliminary estimate for one variant
Hi all! This is my first from scratch design in Fusion but really happy with the outcome, I've been using it for a couple months and it checks all the boxes of what I was looking for. My wants for this project Put the Uno at a 45 degree…
I needed a stand to mount my Arduino Mega 2560, a standard-sized 16x2 LCD display, and a full-sized breadboard. So, I whipped one up in Fusion 360. Some notes: While designed to fit the Mega 2560, the left four holes also allow mounting…
Tool to cut and bend wires for use in a breadboard. To use the the tool: Count how many holes are between the two nodes you wish to connect (including the nodes themselves) Find the equivalent number on the tool. Cut the wire to that…
This is a simple tray for securely mounting a full sized breadboard and Arduino Uno. It includes screw holes for M3 or 4-40 machine screws to securely mount the Aurduino. The breadboard can be secured using the adhesive pad which is…
I've printed these with 0.20 mm layer height and a 0.4 mm nozzle. Breadboards are attached to the holder by sliding them in. Remove any adhesive pads from them first. The breadboard should stay in place fairly tightly, but if not you can…
DIY holder (ESP32,ARDUINO UNO,MEGA,NANO,MINI,BREADBOARD) Print Settings Printer: HACKER XI Rafts: No Supports: No Resolution: 0.3 Infill: 20% Filament: self made PLA 1.75 White Notes: nozzle 0.8, print speed 50 Category: DIY
Breadboard for esp32 Since I have the ESP32 and try to build circuits I have problems because I only have one free space left to connect to the standard breadboard. So I decided to make a version so that it's in the first column and free…
This is a modular holder system compatible with an Arduino Nano, Arduino Uno, or ESP32. You can customize the setup by combining the microcontroller holder with the breadboard holder according to your needs. Simply connect the two modules…
This is a soldering jig for helping align things like header pins on circuitboards that follow the 0.1 inch breadboard convention. The jig has 15 x 15 holes. Both designs are the same except one has clip holders if you use something with…
Take your half-size bread board, and jam it into this here thing, and BOOM, it looks all spiffy. That's all this really does. It does feel nice to hold and you could argue the breadboard itself is now more stable, but mostly I was just…
The larger holds a Raspberry Pi 2/3/4 and a half-width breadboard. The smaller is made for a Raspberry Pi Zero. Nothing too complicated - just handy prototyping cases in solid and slotted bottoms. Both accept 4x M2.5x4 (or M2.5x5)…
Another portable station for the Arduino Uno. I wanted a holder that put my Uno in a specific orientation and secured it with screws so it wasn't flying off every time I pulled out a lead. I used the negative space to place a big tray and…
Remix of Perplixis' case on thingiverse. Updated the breadboard section to fit regardless of which side the tabs are on widened the arduino side and added mounting hole supports which will accept M3 heat-set inserts.
This is a series of bases for Arduino UNO and similar expansion boards. I wanted a solid base to keep my boards along with a typical 830-pin breadboard for my projects. I was initially inspired by Dimiwit-Dave's designs but since those…
This 1x1 Gridfinity Holder will hold up to 3 Breadboards. Just print at least 2 Holders and space them to fit your Breadboards length. The regular sized Breadboards like BB830T from BusBoard Prototype Systems (or a cheaper clone) will fit…
Small project box with both M2 and M3 mounting holes for your ElectroCookie ½ Sized breadboard. Includes 2 x 11mm holes on the end to fit barrel plugs or grommets. Has a little extra space against the wall with the holes to accommodate…
What: Workspace for Elegoo Arduino Uno R3 and Breadboard - essentially the hardware that comes with the Starter Kits you can buy or standalone. Two different orientations depending on preference/need. Notes: For some reason the bottom…
Do you ever need to place an arduino nano on a breadboard? place this case on it to protect it while you still have access to GPIO Designed on Fusion360 Print in PETG or PLA - easy slot together
This tool helps bending wires for use on breadboard. Simple as that. Print instructions Category: Electronics Summary This tool helps bending wires for use on breadboard. Simple as that. Print Settings Printer Brand: Prusa Printer: I3…
Slim Arduino Uno Case with breadboard mount Overview: -This sleek, two-part case is specifically designed to house and protect an Arduino Uno. You can attach a breadboard by slotting two extrusions on the breadboard into the slots in the…
4x2 grid that holds 830 point boards.
I made a remixed version of this magnificent rugged box to store my Arduino UNO / Nano / ESP32 & Breadboard bases .
This is a remix of Ubiquities awesome UNO Holder. I moved the UNO back and made a tray between the breadboard and the UNO to make more room for Dupont connector hookup. I also removed the 9V battery holder from the original model to make…
This jig create bends from 2 to 24 mm in +2mm increments which fits perfectly on a breadboard (holes are separated by 2.54mm) I recomment printing with 0.25 nozzle, but have a try in 0.4, it's a quick print anyway.
Keep your breadboard with your Arduino to tidy up your projects! Features 10mm hole mounting pattern. This may not fit all breadboards. Print Settings Printer Brand: MakerBot Printer: MakerBot Replicator 2 Rafts: No Supports: Doesn't…
holder has: -arduino UNO slot - breadboard slot - 9V battery slot - 3x recess
Mount to do tests with Arduino and Breadboard, if you need to add any element to the base let me know in the comments section, I will be aware of your comments to add more custom spaces if necessary. The model is finished but as I told…
Just print and use! Very simple lightweight model for using with arduino uno (with microUSB connector) and 400 pins breadboard together.
This is a simple prototyping mount I built for a standard Arduino Uno / Leonardo and standard 400-point solderless breadboard. It doesn't require any screws or assembly, and doesn't take very long to print. Category: Electronics
First of all, this design is heavily inspired by Mundo Electronica's “Breadboard Jumper Tool” at Breadboard Jumper Tool by Junikos - Thingiverse . Which is a great design for stripping AWG 22-24 wires with the use of pliers like the ones…
Simple clips to mount a breadboard to a DIN rail. Made to fit with the foam backing still on the back of the breadboard.
I breadboard Arduino & Rpi projects frequently and needed a way to organize the jumper wires by color. The old rubber band method just wasn't convenient for pulling out one or two jumpers or storing them after they're used. This rack…
This template allows easy cutting of wires for solderless or regular breadboards. SCAD file included in case you want to customize the lengths. Category: Electronics
Fully parametric breadboard OpenSCAD-Script with lots of options to print the breadboard which exactly fits your needs. Options include: Number of Pin-rows Number of Pin-Columns Pin-Spacing Pin-Grouping Optional Power-Terminals lots of…
Holds two breadboads next to each other far enough apart to take an ESP32. Note the orientation of the protruding clips on the Breadboards! You will need to remove one of the power rails from the side of the breadboard. See the picture…
I researched several board mounts, but wasn't completely satisfied with them. So I designed my own with Fusion 360. It expects a self-stick 830 point breadboard. I have used this with Uno, Mega, Elegoo R3 (Uno clone), and Adafruit Metro…
A simple Arduino breadboard holder. I designed this around the Elegoo Uno and the big breadboard that comes with it. Both the Arduino and breadboard slide in from the side and are held in with clips. I also added a small parts tray to…
This mounts between two sections of solderless breadboard to allow using carrier boards or modules with a wide row spacing, for example an ESP32 module. Includes dovetail slots/pegs to fit the solderless breadboards I have (should be…
Gridfinity breadboards stand
Simple Arduino UNO (or Leonardo ) and breadboard holder. I made one because I need some big breadboard holder for my Leonardo. Size of screws - 2,5mm Layer Thickness - on my printer - 0,25mm Designed in Autodesk 123D Design. Print…
There are so many mounts or models for the Arduino Uno and fewer for the Arduino Mega I needed to remix something for my purpose. For my project, I am using the larger Breadboard for 5 Volt Sensors and the smaller breadboard is used for…
A holder for large breadboards. Remove the power strip from the left side of one breadboard and the right side of another to fit into the cavities. If the sticky tape isn't holding, remove it and use hot glue to hold it into carrier.
Simple remix to have + - markers on the buses agree with commercial breadboards so someone doesn't fry something.
A little rack for hanging various breadboard jumper cables. Each wire lane has a width of 1.5mm v2 is just some material removal. Haven't printed v2 myself yet. Things you'll need: 1 x M3 x 10mm 1 x insert-with-M3.stl
Fits two 830 point breadboards with spacing to allow an ESP32 dev board to span between them, solving the problem with those boards not fitting common breadboards with any points to spare. As designed it works perfectly for Elegoo brand…
These are parametric Gridfinity bins for storing breadboards, created in OpenSCAD using Gridfinity Rebuilt in OpenSCAD by kennetek . OpenSCAD usage The OpenSCAD model depends on included third-party library code. Download and unzip…
I started studying the programming of STM32 microcontrollers and got one of the Nucleo-64 boards for practice. One of the annoying moments was having it freely “gliding” on the surface of my desk with metal connectors being exposed to…
UPDATE: I uploaded a new STL. There are plenty of arduino holders on thingiverse but not a lot that combine the power of the arduino uno and the mighty breadboard. A friend of mine requested to make a holder that can hold them both and…
It helps easy measurement on the breadboard using an oscilloscope.
Tray for placing arduino uno and a small breadboard on so they don't wander off in the middle of your project. Made a few adjustments to the breadboard side. My breadboards would not fit. Made a bit more room and moved a few of the…
No need for soldering anymore - just put the pin headers on the Wemos D1 mini and place the Mini Breadboard on top. Use some pressure to sandwitch everything together. Print the Mini Breadboard upside down and you do not need any support.…
Holds up to 4 standard breadboards on your HSW, so that they are easy so acsess at all times.
This is a accurate model of the breadboard power unit.
Thanks to @FruitieX for the great original model. Modifications from their model: Resized the opening to work with the Added pass-through holes to allow wires to go under the gridfinity baseplate. Removed some extra features that were…
Several development boards and breadboards use a 0.1" grid for component and jumper placement. The original author's (Steve DeGroof) design https://www.printables.com/model/675415-wire-jumper-jigs/remixes is the basis of this remix and…
These are small labels that can be plugged into a breadboard to give names to the nets you use. They are great if you have built a circuit that is a little more complex and attaches to other systems at certain points. Then when you have…
These are din rail breadboard mounts for 400 and 830 points breadboards. The din rail clips can be attached temporarily to the breadboard base using a piece of 1.75 mm filament. The clips can be attached horizontally or vertically to the…
Handy chassis for experimenting with guitar effect circuits. Holes in place for input/output jacks, DC power jack, potentiometers, and 3PDT switch. Channels in the bottom of the tray are for tucking input/output wiring under the…
You got breadboard cables lying around in an entagled mess? Me too. This cable holder comes with twelve cable slots and four sections for different cable lengts: 80 mm 120 mm 160 mm Put it on your desk or mount it on your Skadis wall…
Make your own custom size optical breadboard! These are 125 mm metric optical breadboard tiles, which can be interlocked on the bottom side using connectors. This was specifically designed to hold M6 DIN934 stainless steel nuts of 5 mm…
My power supply module was always falling off the breadboard, this holder solves that problem and keeps things firmly together. I designed this breadboard and power supply module holder for my ELEGOO Upgraded Electronics Fun Kit but it…
A sturdy baseplate on which to mount your Arduino and a breadboard, making your electronics projects a little bit more portable. Designed by Gerrit Niezen Original idea by Liam Betsworth Photograpy by Patrick Oladimeji Print instructions…
I enlarged the design from @moononournation to 30 rows and added dovetail slots to connect the Vcc and GND rails from a standard 400 pin breadboard. Category: Electronics
Needed a quick and dirty mount for a large toggle switch. Plan to stick it down with some VHB. 12mm shaft toggle switches should work fine.
I used a stamp to imprint the shape of the breadboards to a solid gridfinity 1x5 container. There was just enough space to fit three breadboards side by side. There are cutouts as well so the boards can be inserted in each orientation.…
Carrying populated breadboards in the backpack always ends up in a mess. This design allows standard breadboard modules (with dual bus strips), to be enclosed and protected. The provided fusion file is parametric, allowing mainly to…
This is a half-size breadboard reference model , designed to help with creating mounts, cases, or enclosures that integrate breadboards. It’s dimensionally accurate to standard half-size breadboards (typically 400 tie points) and ideal…
I had a few breadboards that I never stuck down to anything. The double sided foam on the bottom was falling off. So I designed a parametric base for them. Parameters: Board length Board height Tab height Tab width Distance from the…
Prototyping remote cars and rovers often works fine on the bench, but once the project starts moving, new problems show up. This Breadboard Rover is designed specifically for that phase. Instead of hiding everything inside an enclosure,…
Used to prototype using an Arduino Uno R3 and the 830 tie-points breadboard that comes from the Super Starter Kit from Elegoo. That is, a 55.6mm x 165.9mm breadboard, with another .4mm in the holder to make it easier to put in and out.…
Storage option that prevents the wires from tangling. For lengths of 10 cm and 20 cm.
Connect breadboards as required to accommodate big or small projects. The trays use screws and square nuts inserts to keep them connected as a unit. For each tray, you will need: 12 x M3 Square Nuts ( link ) 12 x M3 x 8MM Socket Head…
Another remix from Darealmoo 's DIN-rail mount for Raspberry Pi ( Din-Rail Mount for Raspberry Pi 3B+, thing:3369750 ), adapted for a mini-breadboard. Print 2 DIN mounts and one breadboard plate and crazy-glue them using the notches.…
Does your breadboard have a case of the wobblies? Does it skid across your desk like a hockey puck? Have you always ignored the sticky back until it turns to dust and covers your desk? Have I got the solution for you! This is just about a…
I think it's best to print it with PLA. Supports are not required. Good adhesion to the build plate is needed. Remember that you can always add some glue, but this is last resort.
I have designed a 3D stand for an Arduino board and a breadboard to make them easier to use during projects. The base includes a compartment for the breadboard and an inclined mount for the Arduino board, oriented to the right, as my…
This set of breadboards is perfect for custom projects that require mounting and adjusting the position of various elements! The pitch of the breadboard is 5mm and it is ready for M3 screws without additional nuts (holes are 2.95mm and…
If you have worked with many types of ESP32 or ESP32-S2 dev kit boards you know they do not always fit well onto either a standard breadboard or two attached standard breadboards if you want to assess to all the pins. This 3D print is a…
ESP32 Breadboards: Perfect Fit, Extra Module Spaces.
I needed a way to store my breadboards somewhere, so I designed this holder for the Multiboard which can store up to 7 breadboards. The printing orientation is provided in the STL file. It was designed to print upside down to avoid using…
This is a 5x2x3 Gridfinity bin for an 830 breadboard. I wasn't able to find a suitable one for me so I designed one which hold the breadboard snug and is also stackable. A 4x2 grid would probably work, but i thought having some small…
My box for wires. You can check my other designs here Leave a comment if you have any suggestions for improving any of my Things! If You like my Things and want to say " Thank You " you can click " Like " or support me on my PayPal /…
A multi-functional prototyper setup for an Arduino Uno containing the most needed electrical components for prototyping and breadboarding for your favorite Project. The design is based on the Prusa Control Unit of the Mk3s. I got sick and…
Arduino Breadboard Prototyping Plattform für Arduino Nano (mit Schraubterminal) und Arduino Uno. Statt mehr oder weniger lose Teile auf dem Tisch, lassen sich Experiment mit Arduino stabil auf der Plattform fixieren. Dazu ein Breadboard…
Tired of spaghetti wires everywhere during a breadboard project? Here's a nice hinged box to store them in. It's 10" so for normal Ender 3's will most likely have to print on a 45 degree angle to fit it within the build volume. Requires 2…
The Breadboard Spring Vise makes it easy to hold circuit boards of various sizes in place next to your breadboard. It has no trouble accommodating larger, full-size Arduino Uno or Leonardo boards, and it has no trouble grabbing onto a…
This enclosure for those common cheap mini voltmeters lets you clip them into the power rail of your breadboard. Step 1: Solder two wires to the board (combine red+yellow to a single wire, this way you don't need a separate power line,…
A breadboard plattform made for three Busboard BB830 breadboards (others should fit too), of which two have one of their power rails removed. This allows the board to be used with most ESP32 prototype boards, since they can be plugged…
Project Box for Electronics with Breadboard Compatibility This compact 3D-printed project box is ideal for housing small electronics projects! Designed to fit a standard small breadboard, this box offers convenient cutouts and mounting…
If you like what I do here, come visit my (German) Discord or my Facebook group. Discord: MX-creations Facebook: 3D printed Grow Tools & Accesories - free .stl This set is designed for breadboard-based prototyping with Arduino and ESP32…
