Search results: bumpers

Sort order

210 models

P
PrintablesKucici

DJI Avata 2 Bumpers

Compatible with propeller shields: https://www.printables.com/pl/model/867950-dji-avata-2-propeller-shields Print with PLA , and secure with cable tie. 17.5 g each Note about left and right files: They are almost identical. After putting…

Downloads
3,585
Likes
355
Rating
4.67
P
Printablestrrevvorr

Yet Another Apple Watch Stand With Rubber Bumpers

Remix of Yet Another Apple Watch Stand with holes on the bottom for rubber bumpers (I used 10mm diameter, 3mm thick adhesive rubber bumpers)

Downloads
1,352
Likes
72
Rating
4.83
P
PrintablesCarlRoos

DJI Avata 2 Bumpers - Remix from Kucici

This is a remix of the great DJI Avata 2 bumpers from Kucici. I did make a slight modification which prevents having to use cable ties. I simply added a lip to the bottom support which allows the bumper to clip perfectly in place and is…

Downloads
1,149
Likes
66
Rating
5
P
PrintablesCarlRoos

DJI Avata 2 Bumpers with Propeller Guards

This version combines Kucici's excellent DJI Avata 2 Bumpers and Propeller Guards into a single model with the addition of clips to hold them firmly in place on the DJI Avata 2. Propeller guards have also been modified to provide better…

Downloads
1,099
Likes
74
Rating
4.8
P
PrintablesHelp93

Xbox One Controller Bumpers

This was remixed from RaffoSan's original & pbpunk's (From Thingiverse) Designs to create a more ascetically pleasing bumper set. I have 2 versions, A single-piece drop-in setup, and a 2 piece left & right. This may require more finesse…

Downloads
918
Likes
42
Rating
5
P
Printablesoclastax

TRX4M Low Profile Bumpers, Bumper Delete and Hinged Body mod (STEP availible)

UPDATE 05/07/2025 : the step files are now available ! I originally created this high clearance / low profile bumper for the Trx4m Bronco to solve the issue of poor attack and departure angle, as well as to reduce rubbing of the wheels…

Downloads
869
Likes
102
Rating
5
P
PrintablesMicah

Glock 17 Holster with TPU Bumpers

Use a 25mm M3 bolt and nut and an 8mm diameter spring.

Downloads
580
Likes
71
Rating
4.5
P
PrintablesJoseph Fraser

7 - 7.5 inch FPV Drone Prop Guards and Bumpers

**Work in Progress** Tested** *Updated - May.25.23 *Made For iFlight Chimera7 Pro V2. Can fit other 7-7.5 inch models, Verify yourself** • Prop Guards V6.4 - I added MT30 Connector Holders with 2 Zip Ties slopes. • Prop Guards V6.3 - I…

Downloads
522
Likes
36
Rating
0
P
Printableskcarhart

Nazgul5 v2 - XL5 V5 Frame Arm Guards / Bumpers

Tried to make this as true to the original as possible. This fits a Nazgul5 v2 perfectly. Print with no supports in the original orientation I have provided. For a full set, print two of the left and two of the right. I highly suggest…

Downloads
464
Likes
24
Rating
0

TRX-4 Sport bumpers

*** EN *** Brand new bumpers for the TRX-4 Sport in a slim design for DIY 3D printing. I created new slim bumpers for the TRX-4 Sport. Traversability through the terrain will improve a lot, because the slim bumpers will not catch on roots…

Downloads
388
Likes
62
Rating
5
P
Printablesengineer errant

darwin baby ape v2 motor bumpers

only for the V2 of the baby ape, they changed the geometry for the new version, so all of the ones online as of me making this, will not fit print in tpu at a slow speed and with supports when putting it on, make sure to seat it fully. it…

Downloads
327
Likes
12
Rating
3
P
Printableshalik

Voron 0.2 sensor-less Y axis bumpers

Those itty-bitty prints are meant to serve as y-axis bumpers for Voron v0.2 using sensor-less homing

Downloads
313
Likes
74
Rating
5
P
PrintablesowShredder1988

Bumpers Onewheel XR

Onewheel XR bumpers. Credits to someone in vescify/floattown in discord

Downloads
286
Likes
16
Rating
0
P
Printablesludodg

1/12 RC racing Awesomatix and generic LMP and GT bumpers

Some bumpers i designed for my 1/12th Awesomatix A12 and for the cars of my friends. They need to be printed in Flexable filament which can be a challenge sometimes. I might post some pictures later. Also, I might alter the design of the…

Downloads
285
Likes
17
Rating
0
P
PrintablesDaniRodes

Smittybilt Bumpers for 3DSets RC Jeep Rancher (Wrangler)

I wanted the same bumpers as my Jeep Wrangler, so I re-diesigned the originals from 3DSets. I also customized the winch, winch hawse, a stronger winch drum and the D-Rings. Printed with Overture Matte PLA with 80% infill and 0,10 layer.…

Downloads
266
Likes
48
Rating
5
P
Printablesim stupid

iPhone 14 Pro/Pro Max camera bumpers

very simple design, took me like 5 min to design lol i printed with .12mm layers, used <1g each, and took about a minute each to print scale down slightly if you want a tighter fit this could also be used as decoration for your phone…

Downloads
263
Likes
36
Rating
5
P
PrintablesTechnoVardo

Bumpers/ears for FT991A

Pretty much self-explanatory. Attach to the side of a Yaesu FT991 to protect the knobs and rear panel connectors and give the radio a more solid footing. Uses four (4) 4mm x 20mm flat head screws. If you have a large enough printer, print…

Downloads
218
Likes
18
Rating
0
P
Printableslachtan86

GEPRC CineLog35 V1/V2 landing gear bumpers

Hey Pilots, this is a crazy little design. Why this? I Don't know. It adds about 2 grams on the weight and It Is useless but why not? I want to have legs of my Cinelog35 as brand new. Bumpers are suitable for Cinelog35 V1 or Cinelog35 V2!…

Downloads
208
Likes
19
Rating
0
P
Printablescookiecrook

Cole Jaw Bumpers for wood lathe chucks: Nova, VicMarc, etc.

IMPORTANT! I heard from a friend that his set were loose, and asked him to show me. Turns out he was using an entirely different set of screws. This was dangerous on his part. Remember that using power tools can be dangerous, even life…

Downloads
170
Likes
28
Rating
0
P
Printablesjt001sk

FMS FCX10 bumpers with integrated mount

FMS FCX10 front bumper with an integrated mount. It features a winch plate mount, license plate mount, and towing shackle mount. Several variants are available: I suggest printing with supports to strengthen the chassis mount part (to…

Downloads
166
Likes
20
Rating
5
P
PrintablesJoseph Fraser

iFlight Chimera7 Pro V2 Dragon Edition Guards and Bumpers

**Work in Progress** Tested** *Updated - May.25.23 *Made For iFlight Chimera7 Pro V2. Can fit other 7-7.5 inch models, Verify yourself** • Prop Guards V6.4 - I added MT30 Connector Holders with 2 Zip Ties slopes. • Prop Guards V6.3 - I…

Downloads
160
Likes
13
Rating
0
P
PrintablesFlightpack.eu

XR Bang bumpers

I don't know where the original models came from or who made them. I modified the rear bang bumper to be more in line with the torque bangs. It's not perfect but should give a good idea.

Downloads
154
Likes
5
Rating
5
P
PrintablesSilverBullet126

MN90 - B-1 Style Bumpers

Two sets of bumpers that fit the stock MN90/99S D90 body. It may fit other similar models, but I only have a D90 to test with. Print instructions Two sets of bumpers that fit the stock MN90/99S D90 body. These may fit other similar…

Downloads
146
Likes
14
Rating
0
P
PrintablesMeneerHout

The A Team toy van bumpers and rim

My old "The A Team" toy van from way back in the day had lost some of it's parts. And after finally learing a bit of Fusion 360 I took it upon myself to model new parts for this awesome old school toy fan. In this design you will find a…

Downloads
137
Likes
31
Rating
0
P
Printablesmrsgamedev

Valve Steam Frame Low-Profile Protective Bumpers

As VR developers working on roomscale, physical movement titles like Unseen Diplomacy 2 , our headsets and controllers take a beating during active playtesting. We also have a couple of Steam Frames and needed to tell them apart. We…

Downloads
135
Likes
24
Rating
0
P
PrintablesBrett Crouch

TBS Source One V6 Camera Bumpers

Use TPU filament at 100% infill density and normal supports (no tree). Lay the outside surface down on the plate. Mirror the part in slicer for the other side. As always, I recommend to use the .step file over the .stl file if possible.…

Downloads
134
Likes
8
Rating
0
P
PrintablesWerd

Begode EX30 Bottom Battery Bumpers

Simple battery bumpers that use the side screws for the battery mounts (makes it for easier installation). Please remix it to improve protection or any other need. This was just a rough draft for low profile and simple protection. The…

Downloads
133
Likes
10
Rating
0
P
PrintablesRRocks01

Onewheel GT and GT WTF Rail Bumpers

Two files attached, you will want to create a mirror image of each and print two of each. The GT bumper works for both stock GT rails and WTF Rails. The GT W bumper is for the middle part of the WTF rail where it is most likely to impact…

Downloads
131
Likes
11
Rating
5
P
PrintablesSeb3D

Happymodel Bassline Bumpers

Protection for frame and motor. Print in TPU there is two models to choose, the last one has more clearance between the TPU and the motor, it doesn't need supports. Remer to clean well and cut pieces of TPU stuck the inside walls, and you…

Downloads
126
Likes
9
Rating
4
P
PrintablesWpaulS

K10 Bumpers

Hello there. Made another part for TRX-4M K10 - front and rear bumper. They come with EU plate size area as well as areas for D-rings (I have just my own, so the fitment may not be OK, if you need, let me know the details and I will…

Downloads
124
Likes
21
Rating
0
P
PrintablesRatchet Finesse

TRX4M Defender Rear Slim Bumpers

Traxxas TRX4M Defender rear bumper. Nice and slim so it doesn't scrape like the stock one does. Now the tire/tire cover will rub next. But that's a problem for another day… 3 different styles to suit your fancy. One is 1 piece the other 2…

Downloads
120
Likes
12
Rating
0
P
PrintablesEric U.

Onewheel XR Corner Bumpers

Bumpers for the corners of a XR. Attach with 3M VHB tape. Print in TPU 100% infill. I've only printed one set of these and they have been on my XR for about 6 months. Holding up well with lots of abuse. The photos show the wear.

Downloads
108
Likes
19
Rating
0
P
PrintablesBobtheGreatII

HTC Vive Controller Bumpers

These bumpers for the the HTC Vive controllers were made in an effort to reduce damage when they are struck against a surface. Ideally, these bumpers should break from impact before the controllers themselves do. The two separate halves…

Downloads
105
Likes
22
Rating
5
P
PrintablesDveus Designs

iphone 12 mini case with bumpers

its a little loose with TPU but snug with PLA. will revise soon.

Downloads
105
Likes
9
Rating
5
P
PrintablesTodd Hoffman

Joycon Holder (4), no bumpers

Holds 4 Joycons without bumpers attached.

Downloads
104
Likes
9
Rating
0
P
PrintablesPH designs

EUC Roger Charger Bumpers PH

This is my take on on the roger charger bumpers. The other design didn't print well on my printer because of the overhangs and i wanted to get a closer fit on the face of it. While I was redesigning it i added labels and used the bumpers…

Downloads
103
Likes
6
Rating
0
P
PrintablesPotatoNuke

Tamiya Land Rover Defender 90 Bumpers

Front and rear bumper for Tamiya Land Rover Defender 90 Body. There are some mounting holes for a winch and the front bumper itself. For the bumper mount you need 4 M2 threaded inserts. You need 8 2x8mm tapping screws to mount the bull…

Downloads
103
Likes
21
Rating
0
P
PrintablesCowKiller

Improved Flywoo Firefly18 1S Nano Baby V3 Drone Prop Guard Bumpers

I needed a light prop guard for my Flywoo Firefly18 1S Nano Baby V3 Drone so I don’t scar up the walls in my house. I smashed up the guards it came with real quick and needed a fix. This holds up much better so far and when they do break…

Downloads
102
Likes
6
Rating
0
P
Printablesnotneo

SV06 X-Y-Axis-Bumpers Shock Absorbers

After seeing Taekys x axis bumper i also wanted to add one to the y axis so i designed my own. The credits for the x axis bumper belong to https://cults3d.com/de/modell-3d/werkzeuge/sovol-sv06-x-axis-tpu-damper. Print one in TPU. It slots…

Downloads
102
Likes
16
Rating
0
P
PrintablesBob B

Bemis Bumpers

Ok, don't laugh, but this is a legitimate print! How frustrating is it when you have to replace a perfectly good toilet seat because the bumpers located between the seat and the seat cover fail? Most of these fail long before the toilet…

Downloads
99
Likes
2
Rating
5
P
Printablesstop_sign

AOS Cine25/35 Bumpers

35: Fits the stock 2mm thick bottom and middle plates. 25: Two versions to fit both the stock 1.5mm and 2mm bottom and middle plates offered by cnc madness.

Downloads
99
Likes
2
Rating
0
P
PrintablesJohnSpartan4231

ATV rack bumpers

I prefer to print these in a softer TPU like ninjaflex. they are made in small sections to be easier to print however you can scale up Z if you like to make them custom sized the A size seem to fit most atvs have been tested to fit Yamaha…

Downloads
95
Likes
18
Rating
0
P
PrintablesMitch

Onewheel rail bumpers

The first time I printed it in PETG and it has held up really well. After a month or so one finally cracked. The next set I'll print in PLA+. Edit: I've added a piece with the Onewheel logo in it.

Downloads
90
Likes
17
Rating
5
P
PrintablesSmithpl

GEPRC Cinebot 30 - bumpers/foots

Bumper / foot for Cinebot 30 Drone Category: Mechanical Toys

Downloads
89
Likes
5
Rating
5
P
Printablesblueasis

AYN Thor TPU Corner Stops / Screen Bumpers / Dust Cover

Screen bumpers inspired by every other flip screen handheld on the market; dust cover + strain relief, made because some people were concerned about their screen being bendy at the corners! Two variants, small and big! have fun. Print…

Downloads
85
Likes
17
Rating
0
P
Printablesnotlion

Roger Charger V4SC Huawei R4875G1 Bumpers

I made these bumpers to keep my charger from getting scratched up when I set it down on the pavement at an EV charge station. They're designed to work with the modified Huawei R4875G1 chargers sold by Roger Charger and GuLi. Currently,…

Downloads
81
Likes
5
Rating
5
P
PrintablesLittleDangerous

Shargeek Storm2 Battery Bumpers + Cover

The bumpers are to prevent the bottom of the battery bank from getting scratched up setting it on rough surfaces. They're slightly undersized on purpose to fit snugly and not slide around. The cover prevents dirt intrusion into the ports…

Downloads
80
Likes
17
Rating
5

TBS Source One V5 VTX Bumpers

I've only tried this with the walksnail avatar HD v2 vtx, and one of the parts includes a cutout that lines up with that annoying USB connector so you can pull dvr off this thing still if you want. Should hopefully save your VTX from any…

Downloads
80
Likes
7
Rating
0
P
PrintablesPeter Welch

YETI Rambler 26oz Bottle Bumpers – Top & Bottom

Protect your YETI Rambler 26oz bottle with these TPU bumpers designed for both the top and bottom sections. The bumpers safeguard your bottle from scratches, dents, and damage during daily use. Features: Custom fit for YETI Rambler 26oz.…

Downloads
78
Likes
16
Rating
5
P
PrintablesSpaghettiSnail

DDR Jcab corner bumpers

Bumper made to fit ddr jcab pads. more info and picutres to follow in the future. Please let me know if you'd like a part for pump pads or kcab pads, as they're slightly different. PIU might be identical but it's cold in my garage abnd i…

Downloads
77
Likes
5
Rating
0
P
PrintablesNinchnate

AOS 3.5 Bumpers and Camera Mount

I kept chipping the carbon on my AOS 3.5 so designed these bumpers for the bottom plate and for each of the arms. I also flew analog (now HD Zero). Those cameras are single screw so I designed a series of plates and holders for the…

Downloads
74
Likes
5
Rating
0
P
Printablesjurassic73

Traeger Smoker Shelf Bumpers

This is installed on the Traeger shelf so it doesn't chip the paint away on the legs as it rests against them. These press in to place. Secure with super glue. Print Settings Rafts: No Supports: No Filament: n/a TPU Category: Outdoor &…

Downloads
72
Likes
7
Rating
0
P
PrintablesJarda K 66

Side bumpers for RC Car MN45 scale 1:12

Side bumpers (steppers) for RC Car MN45 scale 1:12 Toyota Landcruiser

Downloads
71
Likes
16
Rating
0
P
PrintablesPeter H

panasonic toughbook cf-29 corner bumpers

Replacement corner bumpers for the cf-29. Print in tpu

Downloads
65
Likes
2
Rating
0
P
Printables3DPrintDemon

Sensorless Homing Endstop Bumpers

…Please at least be sure to hit like & post a make, I'd love to see your prints! Replace your endstop switches when using senseless homing feature on compatible stall guard equipped boards. Use at your own risk & be sure to have your…

Downloads
62
Likes
12
Rating
0
P
PrintablesTim O'Brien

EUC HyperCharger Bumpers [V4SC, Huawei R4830G1, Alien Rides]

My fancy TPU cover / case / bumpers for a few different charger models. Charger Models so far: The new V4SC from folks like GuLi-EUC or Roger Charger. 105.5mm width, 42.8mm high. HUAWEI Charger R4830G1 from NingNing / houeuc. A common…

Downloads
62
Likes
10
Rating
0
P
PrintablesStruna

Škoda ITES spare bumpers and control rod

each bumper consists of a main part and two tpu rubber stops for better printing

Downloads
59
Likes
10
Rating
0
P
PrintablesJeff

Hydro Flask bumpers

These are intended as crumple zones for your water bottle so it doesn't get dented up or otherwise scratched by the trials and tribulations of daily life. You should select settings that make the printed parts deliberately weak so they…

Downloads
58
Likes
7
Rating
5
P
Printablescrashkg

Replacement Bumpers for Ridgid Tablesaw Fence

The Original Ridgid TS3650 Tablesaw is great except for one issue. The fence. It never stays square to the blade. This is because the little bumpers under the fence have very little surface area to clamp to the rail. I increased the size…

Downloads
53
Likes
12
Rating
0
P
PrintablesLowcash

Element Enduro Sendero HD Bumpers w\Hinge

Wanted a Hinge bumper for the Element Enduro Sendero HD, so I made a regular and a stubby rear bumper with tow hitch and D-Rings. 05/28/23 - Redid the Stubby and Regular length bumper with thicker posts and moved block back for more…

Downloads
52
Likes
6
Rating
0
P
PrintablesErik Stolt

Traxxas summit 1/16 LED bumpers and Lightbar

I bought a Traxxas summit 1/16 body and I did not have a front or a rear bumper, so i designed and printed some with lights. I also wanted a light bar on the roof, so desinged and printed that to. I also did not have any stickers for the…

Downloads
51
Likes
10
Rating
5
P
PrintablesLS

Starlink Gen3 Corner Bumpers / Dish Protectors (TPU - No Support Needed)

Print this model in TPU (designed for flexible material) -- I printed with the below settings with great results: No supports enabled 3 top layers, 2 bottom layers, 2 wall loops 10% infill, cross hatch Print SLOW: 20-35mm absolute max The…

Downloads
49
Likes
4
Rating
0
P
PrintablesAero

Mini-Fridge (Clicky-Clack) Door 1515 Corner Bumpers

Gives mini-fridge doors a stealthy look and pushes ever so slightly on the panel to reduce vibrations. I used M3x6 screws along with M3 nut traps to lock the corners in place. Pics are from my v0 and Micron.

Downloads
48
Likes
17
Rating
5
P
Printablesnotlion

134v Charger Bumpers

The hacked Delta ESR-48/56AC rectifier used for 134 volt EUC charging, also known as the “Roger charger”, “AliExpress charger" or “Hyper charger” from Alien Rides has delicate knobs and XT60 port on the back. This bumper set slips on…

Downloads
48
Likes
5
Rating
0
P
PrintablesGeneric User

Blind Bumpers

Had enough of noisy blind banging the window frame? Here may be a solution, TPU bumper that softens the blow and also save your paintwork… I'm no expert in blinds so not sure if this model size is generic enough. The basic dimension is…

Downloads
46
Likes
5
Rating
5
P
PrintablesDan_Mc

Mag Bumpers and Jigs for Wilson 9mm 1911 Magazines

I wanted to add some TPU magazine bumpers to my Wilson 10 round 9mm 1911 magazines. The base plate did not have any screw holes, so I also made a jig to mark and drill them. The marking jig uses a 6mm transfer punch to mark the hole…

Downloads
45
Likes
6
Rating
0
P
PrintablesCaden Wellnitz

DarwinFPV Baby Ape V2 Landing Gear / Bumpers

Print upside down in tpu. May need rescaling depending on printer.

Downloads
44
Likes
0
Rating
0
P
Printablesbmsleight

Gofilm20 Bumpers

OpenSCAD file attached. Needs a small amount of hot glue to keep in place.

Downloads
42
Likes
6
Rating
4
P
PrintablesTeprides

Ningning's Hyper Charger Bumpers

These bumpers are designed to fit Hou Ningning's Hyper Charger (Model Huawei 4850N). The charger have some slightly sharp edges that can scratch your bag. The aluminum is also very prone to scratching. This bumper does 3 things: 1.…

Downloads
42
Likes
3
Rating
0
P
PrintablesArduiblog

Bumpers en couleur et coque LEGO pour Eliobot (ancienne version)

Malheureusement avec certaines couleurs, la détections d'obstacles ne fonctionne pas. Dans ce cas, vous pouvez peindre la coque en noir (à l'emplacement des capteurs). Plus d'infos sur https://arduiblog.com/ Attention, cette coque n'est…

Downloads
41
Likes
3
Rating
0
P
PrintablesBMC3D

Razor Crazy Cart Bumpers

Stand your cart up on end without damaging the paint with these printed bumpers Print Settings Rafts: No Supports: Yes Resolution: 0.25mm Infill: 85 Filament: Sainsmart TPU Category: Sport & Outdoors

Downloads
41
Likes
5
Rating
5
P
PrintablesBrian Flores

Emax Hawk 5 bflores Edition - bumpers, skids, gps, anennta

(EMAX HAWK 5 TO SCALE PARTS) (4) 5" Arms 4.5mm (1) Top Plate (2) Support Rails (1) Mid Plate (with 20x20 and 30x30 mount support) (1) Bottom Plate (with 20x20 and 30x30 mount support) (4) 25mm Standoffs NOT INCLUDED (4) 1.5mm Risers NOT…

Downloads
41
Likes
2
Rating
0
P

Rail Bumpers for the Onewheel Pint

Rail Bumper for the Onewheel Pint Use 3M Double Sided black adhesive to stick on the rails to protect the rail from dings and scratches in board roll overs. I also like to use some reflective tape on the bumpers to reflect in headlights,…

Downloads
40
Likes
0
Rating
0
P
PrintablesJsR

Tamiya Hilux High Lift bumpers.

Front and rear bumpers. For the rear bumper print also rear end to frame rails. My other Hilux mods https://www.printables.com/model/1221617-tamiya-hilux-hilift-bumpers…

Downloads
39
Likes
8
Rating
0
P
PrintablesFeetOffTheTable

Decorative Corner Bumpers - 3DPrinter Motif

These are just basic plates with a 3d Printing motif, use them to decorate something. STEP included to make it easy to modify.

Downloads
39
Likes
12
Rating
0
P
PrintablesSteve Höfner

Tonuino Box with cardholder and bumpers.

Hello, I designed this Tonuino Box. I added the stepfiles so its easy to modify. The handels are designed to hold a textilhandel. So its easier to carry around. Other needed parts: Speaker: Visaton FR 10 HM Button 1x5 from Leiterpiraten…

Downloads
38
Likes
7
Rating
4.5
P
PrintablesPeter Welch

Hydro Flask 24oz Bottle Bumpers – Top & Bottom

Keep your Hydro Flask 24oz bottle safe with these durable TPU bumpers designed for the top and bottom sections. They protect against scuffs, scratches, and dents while maintaining a sleek look. Features: Custom fit for Hydro Flask 24oz.…

Downloads
37
Likes
4
Rating
0
P
Printablesablairlamb

Onewheel GT WTF Rail Badge & Bumpers

I modeled a rail badge after a genuine Float Life WTF rail badge (same dimensions for the pegs, etc.) but with no logo on it. I printed mine out of 95A TPU and it fits perfectly, no tape needed. The rail bumper protectors are my own…

Downloads
37
Likes
5
Rating
0
P
PrintablesT3CHKOMMIE

Battery Tray Bumpers for Ryobi CHINS conversion

I made this part to be a SNUG fit in the standard battery tray of my RM480EX. The bumpers go into each corner and wedge the CHINS 48v battery in the center. These bumpers keep the battery from moving in the X and Y axis, you'll still need…

Downloads
37
Likes
3
Rating
0
P
PrintablesTeprides

Begode Master Pro Basic Bumpers

Note that I made these for the front of the wheel, the bottom bumpers likely won't fit on the back due to kickstand blocking, shouldn't be an issue if you have V1 kickstand. These were very quickly made by me, so the fit might not be…

Downloads
33
Likes
6
Rating
0
P
PrintablesUnashamedFPV

iFlight Nazgul5 V2 TPU Parts | Feet, Bumpers, VTX & RX Antenna Mounts

What it is Parts and accessories for the iFlight Nazgul5 V2. No extra hardware needed. Included parts Left Foot and Right Foot Front Bumper and Rear Bumper RX Antenna Mount. This also works on any FPV quad with posts 20 mm apart. VTX…

Downloads
33
Likes
2
Rating
0
P
PrintablesArcher60x

1991 Eagle Talon Clutch switch bumpers

I needed new rubber bumpers for the clutch switches on a 1991 Eagle Talon. I printed them 100% infill with TPU material.

Downloads
33
Likes
4
Rating
0
P
PrintablesDome Nico

Traxxas Revo 3.3 front + rear bumpers for led ligths

Filament - petg .40mm nozzle .20 layer height 50% infill

Downloads
32
Likes
3
Rating
0
P
PrintablesChris Johnson

Bumpers for MTM Workshop System - remix

Clip-on sides for the Music Thing Modular Workshop System . A fairly straightforward print, requiring no support on a Bambu A1 Mini.

Downloads
32
Likes
3
Rating
0
P
PrintablesAero3D

Wanhao Duplicator D6 Corner feet/bumpers

These are simple feet to be pushed onto the corners of your D6 to prevent scratching the surface and also reduce vibrations. Print in a flexible or semi-flexible material such as TPU, Ninjaflex, Semiflex etc. Once printed simply push onto…

Downloads
32
Likes
2
Rating
0
P
PrintablesSyas

Roomba Carpet Bumpers

They don't look super nice so I use this for the carpet under my couch. Also sorry for the non-commercial license, it's because I'm using the free version of Fusion 360.

Downloads
31
Likes
8
Rating
0
P
PrintablesGaryL

Pidzoom charger bumpers - HW170W fast charger

Bumpers for the Pidzoom fast charger. I printed with Duramic TPU with 15% infill. The cap for the rear bumper can be printed with either TPU or a more rigid filament, such as PLA+ or PETG. Priline 98a TPU is super tough and fairly rigid…

Downloads
30
Likes
4
Rating
0
P
Printablesn3rDy

Vibroplex Bug Feet Bumpers

I couldn't find a model for the original shape & size of the Vibroplex Bug feet or what they call "bumpers", so I designed this. It should be the same size as original. I printed them out of TPU at 50% infill, you could probably get away…

Downloads
30
Likes
5
Rating
0
P
Printablesthelanlegend

K9 Cart Dog Wheelchair Bumpers

Quick solution to our dog getting stuck on things like table and chair legs. Outer bumper printed with TPU to save the furniture from the aluminum cart legs. Holes sized for M4 bolts.

Downloads
30
Likes
22
Rating
0
P
Printableskuki

Bumpers for the Storm 2 Powerbank

About So i got this powerbank on Kickstarter, and it was really cool, except the part about how the acrylic outer shell can get scratched really easily. And scratch it i did the first time i was using it outside. So after i asked the…

Downloads
30
Likes
8
Rating
0
P
Printableswalid khier

Chopped Roof Beetle Custom Front Bumpers

Custom bumpers for my chopped roof Beetle.

Downloads
27
Likes
1
Rating
0
P
Printablescromer

SpeedyBee Master 3X TPU Feet / Bumpers

These are TPU feet/arm bumpers for the SpeedyBee Master3X Frame. There are 2 main variants: The "standard" version The "with antenna holder" version (meant for a 900mhz TBS Crossfire or similar antenna) For each of these there are 5…

Downloads
27
Likes
1
Rating
0
P
PrintablesGlowKitty

Charger Bumpers for AFU and ChiBatterySystems Onewheel Chargers

Stop ripping open bags or having the sharp edges dig into your back! Chi's compact hypercharger for XR and the popular AFU chargers from aliexpress have some sharp edges that bothered me for a while, so I fixed it with some TPU bumpers!…

Downloads
27
Likes
5
Rating
0
P
Printablesitz.fritz

AOS 3.5 EVO V2 Arm Bumpers, light

Introduction As I was building the AOS 3.5 I needed to shave off some weight to get under the 250g mark. I found the stock Armguards to be quite heavy but didn't want to let the carbon totally unprotected. I tried out the several light…

Downloads
27
Likes
5
Rating
0
P
PrintablesSteveC

Suzuki Carry Bumpers

My early 90's Carry had a few missing, and the ones that were on it were hard as rocks, I found them for sale but decided just to model my own. When printing the side that attaches to the truck is up and the side with the hole goes down.…

Downloads
26
Likes
5
Rating
0
P
PrintablesZatilyx

DarwinFPV Darwin240 Johnny 5 Arm Bumpers

3D Printed Arm Bumper for the DarwinFPV Darwin240 Johnny5 This is a custom 3D printed arm bumper designed specifically for the DarwinFPV Darwin240 Johnny5 FPV drone. The bumper mounts directly to the motor base using existing motor screws…

Downloads
26
Likes
3
Rating
0
P
PrintablesHatsjoe

AOS Cine35 Ducts and Bumpers

Print in TPU with 10-30% infill. Carefully cut through the inside of each standoff hole with cutters if you want to be able to snap the ducts on and off or leave complete for a more permanent fitting.

Downloads
26
Likes
1
Rating
0
P
PrintablesHammernine

Chevy Express Door Bumpers

To replace the old door bumpers on my Chevy Express. Fit nicely and work great. Printed with TPU 95.

Downloads
26
Likes
2
Rating
0
P
PrintablesMatt

Tildagon - Tildacase - Fits badge with both bumpers

Remix of the original case for the EMP Camp 2024 badge but to allow it to fit a badge with the screen protector and bumpers fitted. You will still need to print the other parts from the original design:…

Downloads
26
Likes
3
Rating
5
P
PrintablesMike Rainbow

Shorter bumpers - Proto36 RC Car

I found the originals a little to large for my personal preference, so Ive cut a few bits off the original bumpers, these are original files with a bit chopped off so print as per original post Category: R/C Vehicles

Downloads
24
Likes
3
Rating
0