Search results: cam

Sort order

19,722 models

P
Printablessquinn

Curvy Cam Lock Bag Clip

This print-in-place locking bag clip has been designed so that it can be printed without supports , has a fun curvy shape , uses an outward angled handle for easier one-handed use , and is a nice size at just under 6 cm when closed. I'd…

Downloads
15,741
Likes
2,990
Rating
4.76
P
PrintablesCarter

Pi4 Case + FanCover w/Camera Slot

Screwless Snap Assembly. Start with base or bottom case, remove ssd and drop Pi4b board into bottom case so that it rests in provided IO openings correctly. Fit should keep board in place even with a little shake. Place…

Downloads
14,833
Likes
3,575
Rating
4.86
P
Printablesmkoistinen

Flexi-Arm Camera Mount

I needed a method of connecting a "webcam" to my printer for remote monitoring from around the house via Octoprint. So, this comes in a couple pieces: A connector that snaps to the 30x30 extrusion frame (Y-axis on Prusa, and possibly…

Downloads
5,705
Likes
867
Rating
4.67
P
PrintablesJSund

Camera mount for Prusa i3 MK3/MK3S

Camera mount that attaches to the aluminium extrusion of the frame of the Prusa i3 MK3/MK3S. The mount should fit any webcam with a 1/4" tripod mount by using a 1/4"-20 screw. The clip might interfere with the Y carriage bearing if…

Downloads
5,262
Likes
638
Rating
4.75
P
PrintablesPeter Farell

Nativity Camel

A camel I made for use in a nativity scene. Check out the wise men. The Three Magi / Wise Men by Peter Farell | Download free STL model | Printables.com

Downloads
3,038
Likes
380
Rating
5
P
Printablesuamo

Laptop Camera Cover

Simple sliding cover for your laptop camera. Use thin double-sided tape to attach.

Downloads
2,880
Likes
524
Rating
4.74
P
PrintablesTinkrMakr

Prusa MK3S (MK3S+) Pi Camera V2.1 Mount With Optional X Axis Cable Strain Relief

Pi Camera V2.1 Mount With Optional X Axis Cable Strain Relief for the Prusa MK3S & MK3S+ Printers. Note: added mount for MK3S+ (MK3SPlus_X-Axis_Bracket_Pi_Camera_Mount v1.stl). This is the only part that differs from the original MK3S.…

Downloads
2,668
Likes
521
Rating
4.82
P
Printablesprntmkr

Mobile Phone Camping Light - Simple but clever

Intro A simple cap that changes your mobile phone (or any other LED torch) into a CAMPING LIGHT . The design was inspired by Japanese paper lamps . The cap was designed as simple as possible , so it may be used in the most flexible way.…

Downloads
2,445
Likes
1,418
Rating
4.92
P
PrintablesVegatype

Vega 4x5 View Camera

This is a remix of The Standard 4x5 from Standard Cameras ( https://standardcameras.com ) and has been shared with permission from the owner Drew Nikonowicz ( https://nikonowicz.com ). The bellows and ground glass needed for the camera…

Downloads
2,301
Likes
440
Rating
4.85
P
PrintablesTinkrMakr

Prusa Mini (Mini+) Raspberry Pi Camera Module V2.1 8MP Mount

Raspberry Pi Camera Module V2.1 8MP Mount for Prusa Mini and Mini + and OctoPrint. The mounts I could find did not give me the angle that I wanted. I like to have a clear view of the nozzle. UPDATE: I have added another version with X…

Downloads
2,106
Likes
685
Rating
4.81
P
Printablesdoroteo

MEDIUM FORMAT CAMERA - VERSION 2

I uploaded a video where I show the design and assembly process. I tried making the camera as simple as possible, but some parts might be difficult to get. The ratchet wrench components used for the film advance mechanism are totally…

Downloads
1,444
Likes
460
Rating
5
P
PrintablesDvG3DAtelier

Prusa Core One Buddy3D Camera Angle Mod – Better View, No Collision, Round Magnet Mount

I remixed this model because I had a collision with the connection of two frame parts on my Core One. To fix this, I thickened the contact surfaces slightly and moved the camera a bit further inward. This now allows for a secure fit,…

Downloads
1,368
Likes
412
Rating
4.99
P
PrintablesSerial-Comma

Horizontal Chest Mount for Insta360 Cameras

Print with supports on build plate at 0.2mm. Increase infill density and/or perimeter count and/or material used to suit your strength needs. When you try to insert the ¼" screw, you'll need to penetrate the one-layer thick “threading”…

Downloads
1,350
Likes
124
Rating
5
P
PrintablesPomi

Logitech C270 Webcam Cover Replacement (with GoPro Mount)

This is my cover replacement for Logitech C270 Webcam. All you need to do is disassembly the original webcam and remove PCB electronics board. The board is fixed in the new housing using the original screws. Pros Click-clack system. No…

Downloads
1,222
Likes
187
Rating
4.69
P
Printablesschwa

iMac Pro Continuity Camera Mount

A mount to use your iOS 16 MagSafe equipped iPhone as a Continuity Camera for an iMac Pro. See https://www.theverge.com/2022/6/7/23158510 for more information. Link to original .shapr source file.…

Downloads
1,182
Likes
71
Rating
5
P
PrintablesTinkrMakr

Prusa Mini (Mini+) Raspberry Pi Camera Module V2.1 8MP Mount With X Axis Strain Relief

Prusa Mini and Mini + Raspberry Pi Camera Module V2.1 8MP Mount With X Axis Strain Relief. The mounts I could find did not give me the angle that I wanted. I like to have a clear view of the nozzle. Added x axis strain relief to…

Downloads
1,179
Likes
287
Rating
4.97
P
PrintablesBerntzone

Prusa Mini Raspberry Pi Camera V2.1 Mount [THICC]

A Remix of Tinkr3d's great pi camera mount for the Prusa Mini. I realized my Pi Camera was raised about 2mm at the sensor, which made it impossible to fit in the original design. This design should now take this kind of Pi Camera…

Downloads
1,115
Likes
138
Rating
4.74
P
PrintablesHD_Creator

Generic ball joints for camera mounts and other adjustments

For the articulated arm that holds the RaspberryPi camera on my Prusa Mini, I needed a way to fine adjust the viewing angle of the camera. So I opted to design a ball joint. I did a number of prototypes to try out how much the socket…

Downloads
1,100
Likes
109
Rating
5
P
Printablesschwa

MacBook Pro Continuity Camera Mount

A mount to use your iOS 16 MagSafe equipped iPhone as a Continuity Camera for an MacBook Pro. See https://www.theverge.com/2022/6/7/23158510 for more information. Link to original .shapr source file.…

Downloads
1,047
Likes
85
Rating
4.8
P
PrintablesVBalsa

Ender 3 V3 SE webcam mount

Also required: CamScrew-10mm.stl screw made by @Vector3dArt to attach the webcam.

Downloads
1,037
Likes
97
Rating
4.4
P
Printables3DM-DeMeern

Clamp for camper / caravan awning

I created a clamp for my awning so we can hang things. The clamp I had seen on thingiverse was the base of my new design, I recreated it in a smaller version so it would fit the awning. Printed it with PETG 0,2mm layer height and 20%…

Downloads
1,021
Likes
195
Rating
4.67
P
PrintablesNorthStrider

Slide-in Wyze Cam Prusa Mount

1/5/2020 - Added 8mm channel version. Added a version to clip onto the BEAR upgrade extrusion. 9/11/2020 - Added Right Hand version per comment request. (Works for MK3S and the Mini.) I decide to do my own spin on Gabe's awesome cam…

Downloads
995
Likes
174
Rating
4.9
P
Printables3DM-DeMeern

Hooks for Camper / caravan awning

Redesigned the hook so it would print better then his version. Now you can you use it also for hanging towels. hook for awning rails hook for tent rail In addition to this, see also:…

Downloads
980
Likes
167
Rating
5
P
PrintablesIan Foulds

Mason Jar Mosquito Trap (other camping pests too)

To make the trap you just print the lid and fill the jar with sugar water and yeast. The fermentation will generate CO2 which attracts the mosquitos they fly in the cone and get trapped. Turns out it attracts other pests like bald faced…

Downloads
897
Likes
455
Rating
4.5
P
Printablesebeeche

Prusa MK4 camera mount for Logitech C270/C310

Having a 3D printer without a camera is like driving at night without lights. I decided to create a base that doesn't require any alteration to the MK4 and can also serve as a starting point for others to create their own camera support.…

Downloads
890
Likes
203
Rating
4.76
P
PrintablesLebakas

Sliding Camera Cover for Laptops, Tesla, Tablets, Phones

This very fast print can be mounted over any selfie camera (mainly designed for Tesla interior cameras). If you use it for laptops, ensure that it does not damage your display (as the Slider is not flush with the housing. Be sure to print…

Downloads
866
Likes
98
Rating
4.8
P
PrintablesvmLOGIC

Mini Tripod for smart phones and digital cameras

The Mini Tripod for DSLR and Digital cameras offers a full 360 degree rotation plus 180 degrees of tilt and is exactly what I was looking for specifically for 3D scanning. It also locks down well, once you add the noted washer to the deck…

Downloads
860
Likes
174
Rating
5
P
PrintablesM1Designs

Camera Lens Cap 58mm

Both pieces need supports . It should take less than an hour and a half in total. For the settings keep reading, for the story skip down below. The assemble it make sure all supports are cleared and slide the end without the ridges under…

Downloads
843
Likes
52
Rating
4.5
P
PrintablesJan

Large Format Camera Leaf Shutter

Edit 26-01-2026 I have recently developed a new and in many ways better shutter design which I recommend over this version. It does require a few more non-printable components but it may be worth it to many users. It can be found over…

Downloads
822
Likes
167
Rating
4.67

Subaru Cam Seal Tool EJ20 EJ25 DOHC

Tool to help install cam seals to the correct depth for Subaru EJ engines. It's similar to the OEM tool or any of the other professional tools. It stops on the engine head, so you can't put the seal in too deep. It was tested on a 2007…

Downloads
762
Likes
77
Rating
5
P
PrintablesNeonLabs

Parametric Continuity Camera Mount

The new continuity mode for iOS and MacOS allows anyone to turn their iPhone into a webcam. The problem is not everyone has an Apple Studio Display or another specific display. The same goes for iPhone models and phones with cases. The…

Downloads
753
Likes
72
Rating
5
P
Printablesso meone

esp32-cam OV2640 focus adjustment wrench tool

Make sure the cam is mounted securely before using to the avoid risk of tearing the flatflex. Contrary to other designs the grabbing teeth have a tiny angle to them, they get thicker in the middle. This allows for slight off-center usage…

Downloads
711
Likes
49
Rating
4.89
P

iPhone Monitor Mount for Apple Continuity Camera

Here is my iPhone Monitor Mount, the perfect solution for using your iPhone as a webcam during Zoom and other FaceTime calls. This mount is designed to work with a Viewsonic monitor and may work with a variety of other monitors. This…

Downloads
609
Likes
29
Rating
5
P
Printablessumit_basra

MagSafe Charger iPhone Holder for Continuity Camera in macOS Ventura and iOS 16

I wanted to try out the new Continuity Camera feature with the iOS 16 and macOS Ventura betas, so I made my own mount! This was designed around the 2021 14" MacBook Pro and the Apple Studio Display, but might fit other MacBooks and…

Downloads
599
Likes
188
Rating
4.67
P
Printablesfasteddy

Logitech C615 Webcam Privacy Shutter

This is a hinged privacy shutter for a Logitech C615 webcam. The shutter can be raised when the camera is in use and lowered to ensure (visual) privacy when it is not. The mount features cutouts for the 'in use' LED and microphone, and…

Downloads
592
Likes
22
Rating
4.92
P
PrintablesBonkymoon

Ender 5 S1 Enclosure-Compatible Bed Mount for Camera

I wanted to have a bed-mounted camera on my Ender 5 S1, but all of the premade ones I found didn't fit in one way or another. This should be compatible with any 2020 extrusion; I included holes in the side and bottom for locking it down…

Downloads
586
Likes
61
Rating
5
P
Printableszuberio

Wyze Cam v3 Window Mount - Upside Down Gravity Hold

Quick and easy print (~1hr), no supports. I designed this with the mindset that the Wyze Cam v3 has a nice ledge along the bottom that's perfect for ‘locking’ the camera in place if one installs it upside down. I printed the first 1mm in…

Downloads
565
Likes
133
Rating
5
P
Printablesfoorschtbar

Logitech C270 Webcam holder and arm for Original Prusa Mini/MK3/MK4

A simple Webcam holder with a arm for a Logitech C270 Webcam. Works with Original Prusa Mini, i3 MK3, MK4 and similar printers with standard aluminum extrusion profiles. You can Mix&Match the different arms, but i suggest to use the parts…

Downloads
555
Likes
111
Rating
4.89
P
PrintablesEnijat

Camera lens lid with 3D printed springs

This is a fully working, 3D printable camera lens lid for a lens with a 54mm diameter. (If you want another diameter, either remix it yourself (for small changes like 56mm diameter just upsizing the model appropriately seems to work) or…

Downloads
551
Likes
311
Rating
5
P
Printablesgebirgshang

Camper T1 kit card

Print 0.2mm layer height. No supports are needed. 10% infill.

Downloads
532
Likes
121
Rating
5
P
PrintablesHD_Creator

Mini foldable tripod for GoPro action cameras

This design is actually a bit of a spin-off from my tiny tripod ecosystem: https://www.prusaprinters.org/prints/37671-tiny-foldable-tripod-ecosystem-for-different-actio After I got my GoPro Hero8, I first added a GoPro specific part to…

Downloads
508
Likes
81
Rating
5
P
PrintablesLost Carrier

CamelBak Drying Helper for 3l Bladder

A hook and and a "spreader" to help you dry your 3l CamelBak bladder. This is a remix of theRatchets excellent design for 1.5l bladders - thanks for sharing the .f3d. I made hook and spreader and bit larger so that it fits better for my…

Downloads
465
Likes
36
Rating
4.83
P
PrintablesNathanK

Non-MagSafe IPhone Continuity Camera Mount for MacBook Pro

This is a remix of samlovecroc's “Non-MagSafe iPhone Holder for Continuity Camera” that will support the MacBook Pro's screen depth and larger iPhones including those with cases on. The form of samlovecroc's design is preserved the…

Downloads
461
Likes
42
Rating
3
P
PrintablesIng. Ákos

Canon hotshoe - Action camera mount (GoPro, Insta360,...)

Canon hotshoe - Action camera mount (GoPro, Insta360,...)

Downloads
450
Likes
40
Rating
5
P
PrintablesTJL

Updated Generic Camera Mount for SV06 & SV06+

This is an Update to the Generic Camera Arm for SV06 & SV06+. To Date it is my most popular viewed and download model. So now I'm revising it. It now Includes a Small Lip on the block to prevent arm form twisting. The single screw…

Downloads
441
Likes
75
Rating
5

CANOPY - BetaFPV Meteor75 Pro Runcam TBS nano 32 VTX - CANOPY

I designed a canopy to fit a Runcam and TBS nano VTX onto my Meteor75 Pro Frame. It closes with the help of 1-2 Zippies, velcro cable ties or glue or string or anything else. ==> NO ZIP-TIES ON PREVIEW PICTURE!!! The VTX antenna is…

Downloads
440
Likes
40
Rating
5
P
Printablesfuzzms

Replacement lid for Moccamaster coffee maker

This replacement coffee maker lid was designed to replace a broken original. It fits perfectly, as shown in the picture. The pictured prototype is printed in PLA, but I expect to print the final verion in PETG for improved heat…

Downloads
431
Likes
26
Rating
4
P
PrintablesTomáš Kostiha

TrueLife NannyCam H32 - holder

Simple holder for the camera TrueLife NannyCam H32. Base and holder are separately and ready to create your own holder. Both parts are conneced togetther with two M3x12 screws and two M3 nuts. Supports are required for a base only. Screw…

Downloads
423
Likes
27
Rating
4.62
P
PrintablesJoshua

ESP32-Cam Door Peephole Mount

Hello! This is a simple case and baseplate for mounting an ESP32-Cam (AI Thinker and ESP32-CAM-MB) onto a door with a peephole. I didn't use a card with the esp32. I was going to mount this with a hinge assembly so the peephole could be…

Downloads
404
Likes
38
Rating
5
P
Printableschris

Camera Case for ESP32-CAM and the Core One (v2)

Unfortunately, this case https://www.printables.com/model/1193119-esp32-camera-mod-for-core-one was too small for my ESP32-CAM (AI-Thinker and clones). So I modeled a similar one from scratch. Update, March 9th 2025: Created a new version…

Downloads
400
Likes
131
Rating
4.75
P
PrintablesMartinD

Tilted Stand for IP-CAM // TP-Link Tapo C210

Had problems with the visible area in the picture of the camera. Had to tilt it a little bit down, that is what this stand is for. Has a bajonett like the original wallmount. Used PLA, supports needed for the bajonett.

Downloads
397
Likes
50
Rating
5
P
Printablesardoc

UniFi Camera G3 Instant Base

UniFi's G3 Instant is a great little camera, but it tends to fall over, especially if there are children nearby. This model creates a basic stand for the camera, making it harder to tip over. Includes a rear opening for the power cable.

Downloads
396
Likes
46
Rating
5
P
PrintablesHeikit

Buddy3D Buddy 3D Camera Mount Holder Prusa MK4/MK4s and other Aluminum Alu Profiles

Can be fitted without dismantling the Prusa (see photos for various dovetail guides). The V2 version requires no pliers. Important: Layer height for printing 0.1 mm Use 2 M4x20 or M4x12 Screws to mount Kann ohne Demontage des Prusa…

Downloads
372
Likes
58
Rating
4.25
P
PrintablesRosti

Ring 'Stick-Up' Camera Mount

This is a simple mount that provides a 10 degree down and 10 degree lateral off-set for a Ring Stick-Up Cam. The standard Ring mount allows limited direction adjustment via a ball joint. This mount compensates for this. It is useful if…

Downloads
372
Likes
36
Rating
0
P
PrintablesmStarck

Skoda Enyaq back up camera light hood

The original model fits on a Skoda Enyaq, but it blocks a bit sight at the bottom. Furthermore, i have added a small opening to drain water.

Downloads
372
Likes
38
Rating
4.5
P
PrintablesSimple3D

Blink (4th Gen) Outdoor Security Camera Rubberized Magnetic Mount for Vans

I've been testing the battery operated Blink Security Cameras (4th Generation) for my Promaster van. I wanted to make a magnetic mount that I could use on the outside. I wanted to use a large rubberized robust magnetic that wouldn't…

Downloads
371
Likes
30
Rating
5
P
Printablesmweisshaupt

Drink holder camping chair Quechua Decathlon fully 3D printable

Print all 3 files with 100% infill and in a material that is suitable for outdoor use. E.g. PETG.

Downloads
359
Likes
129
Rating
0
P
PrintablesProsaicOrc46

Threaded Cam Lock Cylinder

This lock has a spring loaded wafer that locks the cylinder core in position until the key is inserted. The tailpiece slips onto the inside end of the core and can be held in place with a screw. The pilot hole is designed for a #8-32…

Downloads
355
Likes
42
Rating
5
P
PrintablesNDS RnD

Camera Protector for iPhone 13 Mini

The purpose of this protector is to protect the lenses of the cameras from scratches and shocks by creating a protrusion for the camera section of the phone. Printer configuration: 3D Printer: Elegoo Neptune 3 Pro Filament: eSUN PETG…

Downloads
342
Likes
24
Rating
5
P
PrintablesJobPrinter

Very Slim Webcamcover for ALL

I got a webcam cover and it was way to thick, when I closed my laptop it would bend the screen. So I designed my own. I wanted tot make it really, really thin but still strong and good quality. Hope you like it as much as I do. I used…

Downloads
335
Likes
36
Rating
5
P
PrintablesWolvie

Security Camera Dummy

Hello there. I created a Security Camera Dummy for everyone, who need one :-) I work in security segment and I decided and made this model everyone, who need one. I created entirely by myself and I did 1 universal size, similar to the…

Downloads
329
Likes
46
Rating
5
P
Printablessumit_basra

MagSafe iPhone Holder for Continuity Camera in macOS Ventura and iOS 16

I wanted to try out the new Continuity Camera feature with the iOS 16 and macOS Ventura betas, so I made my own mount! This was designed around the 2021 14" MacBook, but might fit other MacBooks. Here's the version that uses the MagSafe…

Downloads
326
Likes
131
Rating
5
P
PrintablesNlKO33

truelife NannyCam V24 mount

Truelife NannyCam V24 Mount Easy way to mount the cam to anything smaller than 25mm. Suggest 0.1 layer height for thread precision *update 13/01/21 - added a deeper bore version (original is 7mm, long version is 14mm deep) as per…

Downloads
326
Likes
12
Rating
4.83
P
PrintablesKhoi Pham

NC Miata Backup Camera Mount

This is a backup camera mount for an NC Miata with the Advanced Keyless Entry (AKE) package. It a derivative design originally posted by "kiddingme". It is designed around the Nakita backup camera and moment buttons available on Amazon.…

Downloads
320
Likes
17
Rating
0
P
PrintablesTache

CAMLOCK Adapter for RIDGID Hose (OD 43.50 mm)

This is a vacuum adapter for CAMLOCK that fits a RIDGID Hose. It a remix that was made to fit a RIDGID Hose, specified as the 1-7/8 in Vacuum Hose. The model has a 43.50 outside diameter, with threads, which fits snug on the hose. Made to…

Downloads
317
Likes
66
Rating
5
P
PrintablesNick Esselman

Pi camera servo arm for octoprint

Notice: it's not only for the ender 3 v2 Model descriptions: arm rail mount for a aluminum extrusion (tested on ender 3 v2 extrusion) this one the just tall enough to peak over the ender 3 v2 bed height, this is around 10 cm and 12 cm…

Downloads
317
Likes
50
Rating
0
P
PrintablesFabrizio

American Touring Motorcycle Gave One F**K Twin CamTimer Cover

Got the medallion by pwmodder 2017 on thingiverse, files here: https://www.thingiverse.com/thing:3740645 the cover was made for HD Twin Cam engines, test rode it one afternoon, did not melt down

Downloads
313
Likes
31
Rating
5
P
PrintablesKendall Unruh

Blink Mini Camera Mount for Ender 3 Max Neo

I hunted at length for a mounting bracket made specifically for the Blink Mini that would mount it high enough above the bed to see the model, low enough to see the extruder nozzle, and offset far enough forward to be able to spot…

Downloads
298
Likes
58
Rating
5
P

Raspberry Pi Camera Holder Module 3 (CM3) (Adjustable)

WHAT THIS IS: I wanted a raspberry pi camera module 3 (or CM3) holder for my robot. Most models uploaded on printables were made for 3D printers, so I couldn't get a design to fit my robot as they were all supposed to be directly…

Downloads
290
Likes
19
Rating
5
P
PrintablesSergioMonty7

Astronomy camera box

Box for a planetary astronomy camera ZWO ASI224MC.

Downloads
285
Likes
88
Rating
5
P
PrintablesMichalCiombor

Laptop Holders Organization Kit | SSD, AirPods, EarPods, Glasses, Pen, Camera Cover

This is the ultimate laptop holders organization kit. This will help you organize all necessary accessories for your laptop. Your desk will look extra clean. Kit includes : AirPods Holder with optional camera cover Single camera cover…

Downloads
283
Likes
117
Rating
5
P
Printablesisaacramirezd

Dahua IPC cctv camera pole mount

Pole mount for dahua cctv cameras, it is designed to hold the cameras with the rounded base by inserting a nut and an M5 screw. To mount it to a pole you will also need a U shaped bracket, as the one used to hold antennas. I hope it's…

Downloads
278
Likes
45
Rating
0
P
PrintablesSorp2005

Raspberry Pi 3B+ CAM Rover with arm

This is a remix of the Rover . I made the model so it can fit a raspberry pi 3b+, a raspicam model 3, a servo HAT and a dc Motordriver. This Model Provides all files needed. There are two python files, which need to be loaded to the…

Downloads
276
Likes
67
Rating
0
P
PrintablesTocxo

Articulated Security Camera

This is a model with an intermediate detail adjusted to the size of this piece.It is inspired by the camera of 3dfiti . It is a fully articulated camera, its design has been based on a classic street camera. Asembly video on my ig reel .…

Downloads
274
Likes
55
Rating
0
P
PrintablesFlat Badger

Freenove ESP32-Wrover CAM Mount - Prusa MK3 & MK4

A remix of mhparsons Prusa camera mount. The cable channel has been modified to accommodate a usb cable - this does unfortunately mean it needs multiple supports. The included g-code file has supports painted on in all the necessary…

Downloads
270
Likes
32
Rating
5
P

Elegoo Neptune 4 Pro Webcam Mount

Clampable mount to sit your webcam at bed height to the left or right of the bed

Downloads
269
Likes
28
Rating
0
P
PrintablesAsphalt3D

Clam Cam Clamp

The Clam Cam Clamp can clip your chip bag or conceal your treasures. Hinge mechanism uses a flexible cam to lock the clam shut. Pull the lever to unlock the latch and open the clam. Print 1 hinge and 2 clamshells that slide-fit together…

Downloads
258
Likes
48
Rating
5
P
Printablesford5liter

RV Window Crank for 2000's Camper

This is a one-piece window crank with internal knurling to mate to the knurled window crank in that is common in an RV. This print is not high quality as g-code provided, but the result is perfectly functional. I printed this file with…

Downloads
247
Likes
19
Rating
5
P
Printablesburtronix

Laptop or Tablet Privacy Camera Cover

Use this cover to give assurance of privacy on your laptop or tablet. You realize that the camera still functions even if no app or program is using it. Many background apps & browsers could still be viewing you. Covering the camera is…

Downloads
245
Likes
17
Rating
5
P
Printables6mlDaily

Toyota Camry Air Vent Tab

A replacement air vent tab for Toyota Camry 2002 - 2006. Installation. Just push it on to the vent, then push up the blade up to click it into position. Not sure if that made sense. Print instructions Print it "sideways" so that the…

Downloads
243
Likes
10
Rating
0
P
PrintablesHeikit

Remix of Buddy3D Buddy 3D Camera Mount Holder Prusa MK4/MK4s and other Aluminum Alu Profiles

Remix of Buddy3D Buddy 3D Camera Mount Prusa MK4/MK4s and other Aluminum Alu Profiles

Downloads
240
Likes
45
Rating
4.67
P
Printablesgimpelginster

Bird Watching Case for Raspberry Pi HQ Camera

MATERIAL Raspberry Pi 4b Raspberry HQ Camera C-mount lens. In my case a 100mm telephoto lens . Cooling housing for RPi 4b (total height below 24mm) Anker 2000PD or Anker 325 Powerbank USB-A to -C cable Threaded inserts for tripod mount. I…

Downloads
239
Likes
55
Rating
5
P
PrintablesThird Dimension

SG90 servo pan tilt camera platform stabilizer ring

This model is free. If you appreciate this model, please leave a download and a like! A simple ring for pan tilt sets from China. The ring supports the servo. This enables stacking multiple sets into a robot arm or lifting bigger sensors.…

Downloads
236
Likes
25
Rating
5

Security Camera Mount for Ubiquiti Unifi Protect G3 Flex

Mount aligns with OEM screw holes in UVC-G3-Flex-PWM-WT mounting kit for Ubiquiti Unifi Protect UVC G3 Flex security camera. Hinge is indexed with detents allowing for secure positioning of camera angle at 30-degree increments. Hinge is…

Downloads
236
Likes
27
Rating
4
P
PrintablesExtra Fox

1st Gen Google Nest Hello 45-degree Camera Mount

Got a need to mount a Google Nest Hello by your front door, but the wall where your doorbell currently lives is perpendicular to the door? Well, this mount is intended to give the camera the ability to crane it's cold glass eye around for…

Downloads
234
Likes
17
Rating
5
P
PrintablesBitScout

Lens cover for AUKEY webcam

New: v2, which is a lot more solid, doesn't catch on the lens bulge and only slides off sideways. Three versions of a simple webcam cover for the 1080p AUKEY webcam (the wide one, with microphones on each side). The cover slides easily…

Downloads
229
Likes
16
Rating
5
P
PrintablesShaun

Body Camera Phone Mount (attaches to shirt, lanyard or backpack)

Smartphones put power in the hands of everyday people to hold awful behavior to account, but holding up a phone makes you a target. This print lets you use your phone as a body camera, and attaches to a shirt, lanyard or backpack. Add an…

Downloads
220
Likes
36
Rating
5
P
Printablesconorlburns

Pi Camera Bedmount

This mount uses Zipties to mount the camera to the bed. This creates beautiful timelapses! I've used M3 screws from the spare parts bag of my prusa (I used a long screw to attach the swivel so it doesn't break)

Downloads
211
Likes
26
Rating
5
P

ESP32-CAM Mount for Prusa MINI (X-Axis stepper motor)

This is an enclosure to mount an ESP32-CAM on X-Axis stepper motor. LONG CAM CABLE NEEDED! (I used ov2640 with 75mm cable). Inspired by similar mounts for pi cams and customized for ESP32-CAM and Prusa Mini. Case is the same in both…

Downloads
210
Likes
37
Rating
5
P
PrintablesFC2M3D

Cute Cat Holding a Camera Keychain

Easy to make a cute Cat holding a Camera keychain I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No If you like my work consider Buy me a coffee 😊

Downloads
206
Likes
28
Rating
0
P
PrintablesKarim

Ubiquiti Bullet Camera 30 Degree base

Angled base for mounting Ubiquiti Bullet Cameras at 30 degrees. Should work with G3, G4 and G5 Bullet cameras. It allows it to be mounted without kinking the Ethernet cable to get some more angles. Print at higher layer thickness .3 for…

Downloads
200
Likes
26
Rating
0
P
PrintablesPrintin'Monkey

Samsung Galaxy S22 Ultra Tripod Camera Mount

Mount your S22 Ultra to a tripod (this one is a PlatinumPlus by Sunpak) and use the pen as a shutter release!

Downloads
199
Likes
34
Rating
5
P
PrintablesSnipeX 3D

Mintion Beagle Cam Mount | Bambu Lab P1P Cam Mount

This is a mount for the Mintion Beagle Cam to mount it on your P1P. To slide the cam in place you have to put it upside down on a 45 degree angle into the Mount and twist the top in to secure it. Printing Parameters: Walls: 4 Layer hight:…

Downloads
197
Likes
38
Rating
0
P
PrintablesG3ox

Camper Door Stopper / Latch

This is a door stopper / latch designed as a replacement for a camper van (RV). This keeps the door open in windy conditions You have to print both files and attach the catch to the wall and the latch on the door. It is recommended to…

Downloads
197
Likes
39
Rating
5
P
PrintablesVedanshG

Wyze Cam V2 Ender 3 Pro Mount

Wyze Cam mount for Ender 3 Pro. I decided to remix "rdprosser's" design and made the pieces slightly easier to print by removing the cable clips. The pieces are calibrated to my Ender 3 Pro meaning that depending on the accuracy of your…

Downloads
194
Likes
43
Rating
0
P
PrintablesAxt663

Support angle caméra tapo C500

Ce modèle est fait pour accrocher une caméra dans un angle de bâtiment. Pour accrocher le support de la caméra, j'ai utilisé des inserts M5 x 10 x 7. Les trous de fixation sont faits pour des vis M6.

Downloads
194
Likes
14
Rating
0
P
PrintablesGerald

MK4+MK4S ESP32 Cam Mount

Camera Mount for MK4(S) suitable for Part of MK4 "x-end-motor-R2.stl2" No support

Downloads
192
Likes
59
Rating
4.8
P
PrintablesNOLBwithaD

AnkerMake M5C camera mount

This is a mounting bracket for attaching a camera to the bed of your AnkerMake M5C/M5. It has a space for the metal bracket for a Wyze Cam V3, but the head can be modified to fit other cameras. I used Tinkercad.com to modify this design,…

Downloads
191
Likes
40
Rating
5
P
Printablesfoorschtbar

Microsoft LifeCam Studio Privacy Shield Cap Cover

A Privacy Shield/Cap/Cover for Microsoft LifeCam Studio. I used Prusament Galaxy Black PLA and it fits perfect on the Webcam. Additional Parts 2x M2.5 x 5mm Button Head Screws Links The links to AliExpress are advertising links. I would…

Downloads
190
Likes
14
Rating
4.75
P
PrintablesSpotmatic

30mm/0.2mm pinhole, (f150, 90 degrees) Pinhole Camera Cone for the Hasselblad film magazine mount

If you have printed https://www.printables.com/model/247783-hasselblad-film-magazine-mount-pinhole-camera-matt then you can print this cone and get a 30mm/0.2mm pinhole, i.e. f150, 90 degree angle pinhole camera. Material PETG, e.g by…

Downloads
190
Likes
38
Rating
0