8,269 models
First part of my skadis collection. Mainly mounts for printer tools. I will upload more over time. Comment if you have optimization ideas or change requests. The files for the kitchen roll holder are here . Most created by myself, but…
Print approx. €2.61–€3.19 excl. taxPreliminary estimate for one variant
This is a collapsing sword designed to be printed as one part. Its only 140mm high when printed but expands to over 860mm in total length! This version of the Jian prints complete all as one part. The Replaceable Blade Version is…
Print approx. €13.56–€16.58 excl. taxPreliminary estimate for one variant
This collapsing dagger is designed to be printed as one part. Its only 130mm high when printed and the blade extends to 260mm long! The Replaceable Blade Version is available to my Clubs members. Supports are not required, for best…
Print approx. €4.78–€5.84 excl. taxPreliminary estimate for one variant
This Lightsaber has a removable collapsing blade that can be printed separately in a different color. The hilt is designed with a screw on cap which allows the blade to be inserted after its printed. The hilt is 209mm long with the cap…
Print approx. €0.75–€0.92 excl. taxPreliminary estimate for one variant
A collection of 34 snowflakes with hanging loops for decoration purposes, a bit thick ones. They are all around 5 cm big. More 5 cm designs ↑ Link: 34 Snowflake silhouette collection ↑ Link: 34 Snowflake collection ↑ Link: 34 Snowflake…
Print approx. €1.12–€1.37 excl. taxPreliminary estimate for one variant
Tested in PETG, recommended to print in PETG
Print approx. €0.52–€0.63 excl. taxPreliminary estimate for one variant
This is a collapsing sword designed to be printed as one part. Its only 142mm high when printed but expands to over 860mm in total length! The Replaceable Blade Version is available to my Clubs members. Supports are not required, for best…
Print approx. €9.43–€11.53 excl. taxPreliminary estimate for one variant
A set of battery boxes to store AA, AAA, C, D, PP3 (6F22) and 23A batteries. You can print one size at a time and I've included the .3mf and GCODE files for the Prusa i3 MK3/S using PETG which is a great material for these boxes. Also…
Print approx. €0.10–€0.12 excl. taxPreliminary estimate for PETGSource material: PET
I decided to have some fun with the Soap Dish challenge, and design something that hit both the form and function while being incredibly easy to print - and I like how it turned out enough that I'm going to use this in my own home! I…
Print approx. €2.08–€2.55 excl. taxPreliminary estimate for one variant
If the bearings are stuck, try using a small flathead screwdriver to free the balls. Occasionally, the tight tolerances can cause the small components to stick together. Happy Printing :)
Print approx. €0.37–€0.46 excl. taxPreliminary estimate for one variant
Update: Print in place hinge, better snap, better opening handle Print orientation: side
Print approx. €0.57–€0.70 excl. taxPreliminary estimate for one variant
Since I love this test for calibrating new printers and couldn't find it on prusaprinters.org, I uploaded it here. Please note, this is not my work! Autodesk and Kickstarter have developed a common standard that enables people to assess…
Print approx. €3.62–€4.42 excl. taxPreliminary estimate for one variant
Use tree supports :) Want to have a commercial licence on this model? → Join the CLUB :)
Print approx. €2.90–€3.54 excl. taxPreliminary estimate for one variant
4 Variations. Customize to your liking using the STEP file. suggestions are also possible :)
Print approx. €0.24–€0.29 excl. taxPreliminary estimate for one variant
A collection of 23 snowflakes with hanging loops for decoration purposes, 7-9 centimeters big. The same snowflakes without hanging loops are here . More big designs ↑ Link: 26 Big Snowflakes collection Smaller, 5 cm, designs ↑ Link: 34…
Print approx. €1.14–€1.39 excl. taxPreliminary estimate for one variant
Want to support my work and even sell 3D prints of some of my designs? Check the following links. Patreon: http://www.patreon.com/flowalistik Donations: http://www.paypal.me/flowalistik --- The Happy Planter Collection has been designed…
Print approx. €3.84–€4.70 excl. taxPreliminary estimate for one variant
A one part Cheshire-style collimation eyepiece (1.25 in). More effective than a standard pinhole collimation cap, especially when lighting is not optimal. Update 02-2025: Added a version of the eyepiece with crosshairs. Make sure to print…
Print approx. €1.43–€1.75 excl. taxPreliminary estimate for PETGSource material: PET
Overview I always seem to lose my shirts' collar stays when doing laundry. Luckily, they are simple and fast to print! 3D printing collar stays also allows for easy customization, like the chevrons I've included on the version I printed.…
Print approx. €0.39–€0.48 excl. taxPreliminary estimate for one variant
9mm Rugged Ammo Box Collection (50x, 100x, 150x, 225x, 396x) This is a remix of the Rugged Parametric Box by Whity, adapted for 9mm ammunition storage. This version integrates a removable ammo tray and includes all source files for…
Print approx. €0.33–€0.41 excl. taxPreliminary estimate for one variant
List of buttons Geometric buttons : round , square, triangle and hexagon Japanese video games buttons : acorn, leaf, mushroom and star Dimensions of the stl file width : around 17 mm Height : 3 mm Thread Holes : 2 mm Print Settings…
Print approx. €0.15–€0.18 excl. taxPreliminary estimate for one variant
A collection of 34 snowflakes for decoration purposes, a bit thin ones. They are all around 5 cm big. They are also the same snowflakes without hanging loops here . More 5 cm designs ↑ Link: 34 Snowflake silhouette collection ↑ Link: 34…
Print approx. €0.83–€1.01 excl. taxPreliminary estimate for one variant
A collection of 34 snowflakes with hanging loops for decoration purposes, with a silhouette design. The same snowflakes without hanging loops are here . More 5 cm designs ↑ Link: 34 Snowflake collection ↑ Link: 34 Snowflake collection ↑…
Print approx. €0.50–€0.61 excl. taxPreliminary estimate for one variant
I remixed this model because I had a collision with the connection of two frame parts on my Core One. To fix this, I thickened the contact surfaces slightly and moved the camera a bit further inward. This now allows for a secure fit,…
Print approx. €0.51–€0.62 excl. taxPreliminary estimate for PETGSource material: PET
Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models , get access to exclusive models , and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my…
Print approx. €1.42–€1.73 excl. taxPreliminary estimate for one variant
parts size adjusted for easier storage
Print approx. €2.04–€2.49 excl. taxPreliminary estimate for one variant
This is a part of the Botanical Collection available in our Printables Club. A geometrical design inspired by plant ornaments and crystal structures. Very easy to print and looks great in modern interiors! Print information: Recommended…
Print approx. €1.24–€1.52 excl. taxPreliminary estimate for one variant
PRINT, ASSEMBLE, and USE AT YOUR OWN RISK Barbell collars can be cheap or expensive… I figured I could make custom ones for 3D printing gym enthusiasts! Two sizes are available in the zip folders: Ø2" will fit slightly loose on Olympic…
Print approx. €6.67–€8.15 excl. taxPreliminary estimate for PETGSource material: PET
Stützen sind nicht erforderlich, für beste Ergebnisse verwenden Sie eine 4-mm-Düse. Veröffentlichen, verteilen, verkaufen oder handeln Sie die Dateien oder physischen Modelle dieses Objekts nicht.
Print approx. €0.84–€1.02 excl. taxPreliminary estimate for one variant
I wanted to see how the different infill patterns look, so I've prepared a collection from all options in Prusaslicer. 16 pcs of hexagon, each with different infill - and they look really great! I've attached the prusaslicer project and…
Print approx. €1.55–€1.89 excl. taxPreliminary estimate for PETGSource material: PET
Track your furry friend with ease using this collar/strap attachment designed to hold an Apple AirTag. The ergonomically rounded corners ensure that your pet won't experience any irritation, and the minimal profile prevents the attachment…
Print approx. €0.20–€0.25 excl. taxPreliminary estimate for one variant
Print in place bearings DIN 625 A oopening is added to insert lubricant TESTED !!! IF YOU NEED OTHER DIMENSIONS? JUST LEAVE A COMMENT
Print approx. €0.32–€0.39 excl. taxPreliminary estimate for PETGSource material: PET
A collection of 34 snowflakes with hanging loops for decoration purposes, a bit thick ones. They are all around 5 cm big. More 5 cm designs ↑ Link: 34 Snowflake silhouette collection ↑ Link: 34 Snowflake collection ↑ Link: 34 Snowflake…
Print approx. €0.68–€0.84 excl. taxPreliminary estimate for one variant
This is not all of the SEC Teams - as people request the additional teams I will do my best to respond. All gcode files are setup for manual color changes I will fill in the missing teams as they are requested - Enjoy! All gcode files are…
Print approx. €1.24–€1.52 excl. taxPreliminary estimate for one variant
Cardbox with dividers. no supports needed.
Print approx. €10.86–€13.27 excl. taxPreliminary estimate for one variant
This is a model of Luz's Palisman Stringbean from The Owl House with a collapsing staff. It is 83mm wide, 183mm long and 268mm tall. With the staff fully extended, it is about 1.4m tall. This remix is based on Stringbean Palisman - The…
Print approx. €3.25–€3.98 excl. taxPreliminary estimate for one variant
🇬🇧 – English – A collection of 23 snowflakes with hanging loops for decoration purposes, 7-9 centimeters big. The same snowflakes with hanging loops are here . 🇨🇿 – Czech – Sněhová vločka 23x jinak s očky na zavěšení, 7-9 centimetrů…
Print approx. €1.14–€1.39 excl. taxPreliminary estimate for one variant
So I decided to continue (re)mixing CaseStudyno8´s designs (https://www.thingiverse.com/thing:1866782) and 3DPRINTINGWORLD´s ideas (https://www.thingiverse.com/thing:3606120) to create my own Yoda's collapsing lightsaber. So again I…
Print approx. €0.23–€0.28 excl. taxPreliminary estimate for PETGSource material: PET
🇬🇧 – English – A collection of 34 snowflakes for decoration purposes, a bit thin ones. They are all around 5 cm big. A thicker snowflakes of the same size are here . Smaller models, around 2.5 cm in size, are here . And here with hanging…
Print approx. €0.82–€1.01 excl. taxPreliminary estimate for one variant
Remixed the excellent work of Rephlex00 to suit my need. I simply elongated the tabs that hold on to the collar so they'd hang on to it more. As originally designed my 55lb pitties shake the AirTag off when they shake their heads side to…
Print approx. €0.59–€0.72 excl. taxPreliminary estimate for one variant
Stützen sind nicht erforderlich, für beste Ergebnisse verwenden Sie eine 4-mm-Düse. Veröffentlichen, verteilen, verkaufen oder handeln Sie die Dateien oder physischen Modelle dieses Objekts nicht.
Print approx. €0.76–€0.93 excl. taxPreliminary estimate for one variant
🇬🇧 – English – A collection of 25 small snowflakes for decoration purposes. A version with hanging loops is here . Bigger models, around 5 cm, are here and here . 🇨🇿 – Czech – Sněhová vločka 25x jinak. Verze s háčky na zavešení zde .…
Print approx. €0.89–€1.09 excl. taxPreliminary estimate for one variant
🇬🇧 – English – A collection of 34 snowflakes for decoration purposes, a bit thick ones. They are all around 5 cm big. Thinner snowflakes of the same size are here . Smaller models, around 2.5 cm in size, are here . And here with hanging…
Print approx. €1.22–€1.49 excl. taxPreliminary estimate for one variant
Hello, Welcome to my profile, full of models and miniatures :-) I have an Extendable, retractable, collapsing long sword for you. The individual parts fit together perfectly and it is very well thought out and so you can even play with…
Print approx. €20.05–€24.51 excl. taxPreliminary estimate for one variant
I found a really good cable clip collection for (40 mm and 45 mm) aluminium extrusions from thingiverse and wanted to share them. Will these fit my aluminium profiles and cables? These clips were designed for the very common 40 I-type and…
Print approx. €3.37–€4.12 excl. taxPreliminary estimate for one variant
UPDATE 2025: 38mm hoses are now supported, but I have released here on Cults3D I am still using the same part printed in PETG in 2023! This has stood the test of time but now my nozzle has failed, so here is a new model to repair the…
Print approx. €1.20–€1.46 excl. taxPreliminary estimate for one variant
Hello, Welcome to my profile, full of models and miniatures :-) I have a Collapsible, retractable dagger for you. It works nicely, you can even hit it and it won't break! It's nicely made and the blade comes out really easily. It prints…
Print approx. €5.00–€6.11 excl. taxPreliminary estimate for one variant
This is not all of the ACC Teams - as people request the additional teams I will do my best to respond. I will fill in the missing teams as they are requested - Enjoy! All gcode files are setup for manual color changes
Print approx. €1.52–€1.86 excl. taxPreliminary estimate for one variant
Dust collection is a difficult challenge with any bandsaw. Mine is a King Industrial KC-1433FXR and came with a very inefficient and essentially useless dust collection solution so I came up with this 2 part dust collection duct that is…
Print approx. €13.36–€16.33 excl. taxPreliminary estimate for one variant
9mm Rugged Ammo Box Mini Collection (20x, 25x) This is a remix of the Rugged Parametric Box by Whity, which was remixed by groog adapted for 9mm ammunition storage. This version integrates a removable ammo tray and includes all source…
Print approx. €0.20–€0.24 excl. taxPreliminary estimate for one variant
Make Your Own Custom Charing Station using these 3D Printed clips Go have a look at your current charging setup now, I bet the wires are all tangled! I have included designs for a basic charger station that has cable channels on the back.…
Print approx. €2.80–€3.42 excl. taxPreliminary estimate for one variant
This is an Apple AirTag holder that slips over a dog collar or harness. A bit of extra hardware is needed to assemble it: 4x m3 heat set inserts such as these . 4x m3x8mm bolts You can print out of any filament, but ASA/PETG will do…
Print approx. €1.02–€1.25 excl. taxPreliminary estimate for one variant
Here's my super long lightsaber, like to print it. Supports are not required, for best results use a 4mm nozzle. The katana is about 40 inches/102cm long in total and the handle is about 7.8 inches/20cm long. Have fun printing.
Print approx. €0.37–€0.46 excl. taxPreliminary estimate for one variant
Friction Fit Collet Nut Fan 3 Blades at ~35 degrees to generate enough air flow to move chips without blowing them completely everywhere
Print approx. €0.26–€0.32 excl. taxPreliminary estimate for PETGSource material: PET
Not content with the designs already out there, I designed my own cyclone dust collector to achieve the following: print quick and cheap (<400g of filament!) use minimal supports (see ‘Support Deck’ section below) integrate a vacuum…
Print approx. €4.20–€5.13 excl. taxPreliminary estimate for one variant
REMIX of "Cyclone Dust Collector" - Lower part only! Please get the upper part from here: https://www.printables.com/model/312929-cyclone-dust-collector -------------------------------------- Cool one, made an edit on the lower piece, for…
Print approx. €11.14–€13.61 excl. taxPreliminary estimate for PETGSource material: PET
A bone shaped dog collar tag that has room for a name and contact detail to be added to. Quick print at around 20-30 minutes. Name can be added using a sharpie or by remixing the model to add your own letters.
Print approx. €0.39–€0.48 excl. taxPreliminary estimate for one variant
Introducing the CollarCard: three sets of collar stays in credit card format. The stays are 9, 10 & 12 mm wide.
Print approx. €0.33–€0.40 excl. taxPreliminary estimate for one variant
Summary I designed an AirTag holder for a standard 1 inch/25mm (or smaller) collar. It's strong, filament efficient (about 4g), secures without any hardware, and allows for easily embossing your contact information and pet's name on the…
Print approx. €0.50–€0.61 excl. taxPreliminary estimate for one variant
A 'collar stiffener only' version of my EDC (Emergency Debonair Card) I had a few requests to make just the collar stiffeners, so I made a credit-card sized version that holds 6 collar stiffeners. There's also a mini x2 version here. Key…
Print approx. €1.19–€1.46 excl. taxPreliminary estimate for one variant
I couldn't find any existing models that perfectly fitted my needs (collecting coins from 50 cents to 2 euros and were not too bulky), so I designed my own model. Feel free to customize the dimensions (or anything else) to better suit…
Print approx. €1.36–€1.66 excl. taxPreliminary estimate for one variant
Well, I needed some radiator collars (escutcheon rings) for the new kitchen floor - the sizes available in the nearest hardware store would not fit, and I have a 3D printer, so... There are models for 17, 27 and 34mm pipes - If you have…
Print approx. €0.56–€0.68 excl. taxPreliminary estimate for PETGSource material: PET
Less than 10 percent of people who download an item click the “like” button. Be the 10 percent. Click the “like” button and show your support. If you find this model useful, feel free to buy me a coffee . This is a collection of remixes…
Print approx. €1.47–€1.80 excl. taxPreliminary estimate for one variant
🇬🇧 – English – A collection of 34 snowflakes for decoration purposes, with a silhouette design. The same snowflakes with hanging loops are here . 🇨🇿 – Czech – Sněhová vločka 34x jinak stylem “obrysová”. Stejné sněhové vločky s očkama na…
Print approx. €0.55–€0.67 excl. taxPreliminary estimate for one variant
These are 34mm and 22mm guy collars for the incredible 10 meter Sotabeam Travel Mast. I made this eye balling the ones available on the Sotabeam website. They should work on other masts as well. These collars will slide over one of the…
Print approx. €0.87–€1.07 excl. taxPreliminary estimate for PETGSource material: PET
Timeless parametric (many sizes) model of various étagères to choose from. A perfect addition to the nutcracker model (which is also nice and easy to print). - highly print-optimized. - each form ca be easily split in slicer to remove the…
Print approx. €3.82–€4.67 excl. taxPreliminary estimate for one variant
Update 3 The center of the hole in the fan adapter was off-center with the fan, so I corrected it. Please use “fan adapter v3”. fan adapterの穴の中心がファンとずれていたので修正しました。「fan adapter v3」を使ってください。 Update 2 アップデート2 There was a gap between the…
Print approx. €0.18–€0.22 excl. taxPreliminary estimate for PETGSource material: PET
For me, Easter is all about eggs and eating them. I really like sunny side up fried eggs🍳. So what better way to show everyone how I like my eggs by wearing them as earrings! Size Approximately 17 mm (width) * 20 mm (height).
Print approx. €0.27–€0.33 excl. taxPreliminary estimate for one variant
I believe it's more discrete than other designs because it doesn't have the “roof”, instead there is just an inner ridge on top keeping the tag in place while letting the silvery part of the tag be visible. Prints well with PETG and brim.…
Print approx. €0.30–€0.36 excl. taxPreliminary estimate for PETGSource material: PET
Salah Vase Collection
Print approx. €16.27–€19.89 excl. taxPreliminary estimate for one variant
Mini United States Postal Service (USPS) Standard Collection Box Receptacle (Blue Box) that uses a vintage Post Office (PO) Box Door. Can be used as a mail holder, change bank, or display piece. The back piece is not completely…
Print approx. €1.87–€2.28 excl. taxPreliminary estimate for one variant
Dies ist ein Sperrschieber für die Absauganlage für Rohre in der Größe DN50 (2") Er ist leicht zu montieren mit nur 4 Schrauben und Muttern der Größe M5 . Die Schrauben müssen mindestens 15mm (0.6") lang sein! Er lässt sich mit dem Winkel…
Print approx. €5.55–€6.78 excl. taxPreliminary estimate for one variant
A 'collar stiffener only' version of my EDC (Emergency Debonair Card) I had a few requests to make just the collar stiffeners, so I made a mini version that holds 2 collar stiffeners. There's also a larger credit card sized x6 version…
Print approx. €0.45–€0.55 excl. taxPreliminary estimate for one variant
Hier zwei verschiedene Modelle von Trichtern die ich mir für die Werkstatt hergestellt habe. Einen großen mit großem Durchlass zum betanken von Fahrzeugen wie Vespa PK50 oder Traktor und einen etwas kleineren mit integriertem Gewinde.…
Print approx. €8.49–€10.38 excl. taxPreliminary estimate for PETGSource material: PET
Dog collar mount that fits the Chipolo One Bluetooth tracker device, compatible with the Apple Find My app. Rounded corners, no sharp edges. Collar hole: 30mm x 6mm (suitable for medium breed dogs) Filament used: Prusament PLA Gentlemens…
Print approx. €0.85–€1.04 excl. taxPreliminary estimate for one variant
Cyclon dustcollection with a bought cyclon (Banggood,Amazon) and a Barell with Cover. The Cyclon is bolted on the Barell. The Adapters for the hoses between the parts are 3d-printed. Vacuum Cleaner: Kärcher MV2.
Print approx. €0.14–€0.17 excl. taxPreliminary estimate for PETGSource material: PET
* No screws, glue, or any hardware required * revision note 09-07-2024: “the master printer update” The current version can be fastened by a flange locking screw in the bottom of the pawn. The base stayed the same. Stay tuned for the pip…
Print approx. €0.81–€0.98 excl. taxPreliminary estimate for one variant
Storage shelf for up to 8 plates for the Tefal Snack Collection waffle / sandwich maker. I added the support beam after I printed the body to reinforce the structure. An improved model could have wider carriers and better support…
Print approx. €0.53–€0.64 excl. taxPreliminary estimate for one variant
Dust Collector Attachment for vacuums with a 35/32 mm diameter . The tool features a U-shape divided into two arms, each equipped with multiple air intake holes. This design allows it to capture dust and debris efficiently across a larger…
Print approx. €3.60–€4.40 excl. taxPreliminary estimate for one variant
Dry out those growlers without getting dust and crap inside them!
Print approx. €1.40–€1.71 excl. taxPreliminary estimate for one variant
Vakuum cleaner attachment for drilling holes. It holds itself on the Wall. Printed with 0.2 layer height in PETG. Print took about 3h 7min. Use support on the inner ring.
Print approx. €2.48–€3.04 excl. taxPreliminary estimate for PETGSource material: PET
Sin soportes y de impresión muy fácil.
Print approx. €0.27–€0.33 excl. taxPreliminary estimate for one variant
Case for the Collide 39 keyboard kit by SpaceCat Designs inspired by the Kishsaver keyboard: https://spacecat.design/products/collide39-pcb-kits Print instructions Print the top with the plate facing down and the bottom with the bottom…
Print approx. €3.78–€4.62 excl. taxPreliminary estimate for one variant
Eine einfache Box mit Deckel zum Sammeln von leeren Batterien, die später fachgerecht entsorgt werden. Abmessungen: 100x100x75 mm Translation: DeepL A simple box with a lid for collecting empty batteries, which are later disposed of…
Print approx. €6.73–€8.22 excl. taxPreliminary estimate for PETGSource material: PET
44mm diameter and 44 height
Print approx. €0.70–€0.85 excl. taxPreliminary estimate for PETGSource material: PET
I created the Metalworker’s Pacifier when I was too cheap to buy a new chip collector, and I didn‘t like the large size they always came in. Printing the parts: The print is straightforward, but you need to make sure that the parts stay…
Print approx. €1.07–€1.30 excl. taxPreliminary estimate for one variant
This is a preview and a first prototype, under active development.
Print approx. €8.71–€10.65 excl. taxPreliminary estimate for PETGSource material: PET
I’ve seen that Solar System Lithophane Planet Lamp Collection by @FritzPeppone is lacking my favorite moon so I decided to add one. Moon is roughly 140mm so it’s compatible with Prusa mini and Bambu Lab A1 mini. BTW this model got M75x4…
Print approx. €6.37–€7.79 excl. taxPreliminary estimate for one variant
This is one of my IKEA ORDNING collection models, take a look at the others below: Utensil cutlery drainer clamp hook for dish drainer. IKEA ORDNING. Folding dish drainer clamp hook, for big pots - IKEA ORDNING ORDNING Dish drainer feet…
Print approx. €4.52–€5.53 excl. taxPreliminary estimate for PETGSource material: PET
I present my Eachine Tyro 79 Part collection: Battery Saver, Cameramount, a cute sharkfin, plate on the back and antenna. All parts were made with PLA and high infills. Depends on your flight style;-)
Print approx. €1.77–€2.16 excl. taxPreliminary estimate for one variant
Working with @Layer63_3290755 we decided to make the deathstar model of this lamp. Unfortunately due to an error in our communication we worked with different sizes of the lamp. When we finally decided to work on the 150mm Diameter…
Print approx. €1.11–€1.36 excl. taxPreliminary estimate for one variant
This adapter is designed to fit the outside diameter of the 4" dust collection port on wood working tools and reduce it to the ID of the 2.5" shop vac / dust separator hose. Many online adapters and store bought adapters that I've tried…
Print approx. €6.08–€7.43 excl. taxPreliminary estimate for one variant
I thought it would be fun to create my interpretation of the famous collar worn by the late, great Ruth Bader Ginsburg. I modeled the collar in Fusion 360 for the current contest. As the prize this round is a Prusa Mini, I've included…
Print approx. €5.07–€6.20 excl. taxPreliminary estimate for one variant
A simple tray for storing ER32 collets. 168x84mm footprint (not Gridfinity design but compatible dimensions)
Print approx. €5.61–€6.86 excl. taxPreliminary estimate for one variant
An adaptor to connect the Makita vacuum cleaner to the Makita planer
Print approx. €3.77–€4.61 excl. taxPreliminary estimate for one variant
with vacuum connected drill holes on most surfaces to reduce dust. will fit shop vacuum.
Print approx. €10.21–€12.48 excl. taxPreliminary estimate for one variant
This improved version of my previous print is a bit easier to use. The previous version worked, but the handle tended to get a bit jammed into the spindle hole. This new version still fits into the spindle hole, but it has a shoulder…
Print approx. €2.56–€3.13 excl. taxPreliminary estimate for PETGSource material: PET
The inner diameter for the vacuum cleaner connection is 36mm. To mount the adapter to the saw, you have to drill two holes into the saw and cut a thread. I printed the adapter in PETG with 30% infill and a layer height of 0,25mm DRAFT on…
Print approx. €4.77–€5.83 excl. taxPreliminary estimate for PETGSource material: PET
2 versions available : Version 1 (Not fully printed) includes 4 parts : Common parts : “Cyclonic cone” “Karcher WD3 KWD3 Hose adapter” (if you want to plug this hose) “Bell mouth” “Hose clip” Version 2 (Fully printed) includes 4 parts too…
Print approx. €0.68–€0.83 excl. taxPreliminary estimate for PETGSource material: PET
Snail collector. Sběrač šneků v akváriu.
Print approx. €2.51–€3.07 excl. taxPreliminary estimate for one variant
I will upload all my Medall Creations here for you to use. Have fun If you love this design and want to see more fun projects like it, consider joining my club on Printables to help me keep adding free models for everyone to enjoy. If you…
Print approx. €0.19–€0.23 excl. taxPreliminary estimate for one variant
