BMW M2 Competition Wall Art
Very nice and minimalistic car silhouette of a BMW M2 Competition. You can resize it as you want.
Print approx. €1.08–€1.32 excl. taxPreliminary estimate for one variant
- Downloads
- 358
- Likes
- 50
- Rating
- 5
298 models
Very nice and minimalistic car silhouette of a BMW M2 Competition. You can resize it as you want.
Print approx. €1.08–€1.32 excl. taxPreliminary estimate for one variant
Nice and detailed Wall Art model of the BMW X3 M Competition 2022. Scalable. I accept suggestions for new car models
Print approx. €1.45–€1.78 excl. taxPreliminary estimate for one variant
A KeyTag with or without G-Clef I've also added a .3mf file for you to change letter from A to desired letter.
Print approx. €0.11–€0.13 excl. taxPreliminary estimate for one variant
A Dual Egg Capsule (2 eggs) for Egg Loft Altitude events, specifically designed to be printed with LW-PLA. Modeled and created to fill a need for rocketry hobbyists as no commercial Dual Egg capsule kits are available. Foaming LW-PLA can…
Print approx. €0.11–€0.14 excl. taxPreliminary estimate for one variant
Custom wheels for the fire competition distributor - individual fire sport. Suitable for M16 screw - thread in model. Before use, it is a good idea to adjust the thread with a tap. My recommended print settings: 4 perimeters, 50 % infill,…
Print approx. €3.88–€4.74 excl. taxPreliminary estimate for PETGSource material: PET
My trophy design is centered around a computer mouse that I have used as a representation of Computer Aided Design, (I decided to use a mouse because I felt that a keyboard or PC tower, etc. wouldn’t be as visually pleasing). I wanted my…
Print approx. €0.40–€0.49 excl. taxPreliminary estimate for PETGSource material: PET
A simple, but carefully designed test model for tuning Small Area Flow Compensation in your slicer. A companion spreadsheet is included to assist in manipulating the Flow Compensation model. Original post-processing script by Alexander T.…
The extended handle version can be used not only for the rear left bed level point but as a regular shim as it is more convenient to install
PS5 snap-on driving wheel with high tolerances. This is a PS5 controller snap-on driving wheel meant for ultimate performance. Tolerances are very tight to eliminate play and sloppiness. All parts are 3D printable, but supports are…
This model is used to find the settings for X-Y hole and contour compensation. After printing measure the dimensions of the outside rectangle. Subtract your printed dimensions from the actual and divide by 2. This number will be your new…
Print, Measure, Save your values to slicer & print dimensionally accurate forever.
This is a simple box for blister plasters from Compeed or other manufacturers. The hinge is designed to get a piece of 1.75mm filament to hold the box and the lid together. Print it with your default settings for your filament type you're…
UPDATE: 7/3/2025 I have added fusion360 and step files for the backend, if someone want to run wild with it and make modifications. If you do make changes, please upload as a remix. These files are not intended for commercial use. It…
Why calibrate Elephant foot compensation at all? Well, I have to admit that I used “standard” values for EF compensation for years. But I stumbled over this matter when designing my printed pinhole lens where I use the EF compensation…
Compensator for the glock Print Settings Resolution: 0,16 Infill: 10 Category: Other
Descripción Técnica: Chasis Mini Sumo Modular (ESP32 / Arduino) Este es un diseño de chasis para un robot Mini Sumo de competición, optimizado para ser resistente y versátil. El sistema es modular, lo que permite intercambiar soportes…
Airsoft Muzzle device for Glock Models with a Threaded Barrel. Attaches via M14x1 LH threads. This Print consists of two parts. A threaded insert which goes onto the threaded portion of the outer barrel and the comp itself which simply…
This model has been submitted to the Prusa Printers tabletop games contest! Just to show it fits the Criteria its: Printability : Been printed in FDM and resin. Here is a gallery of my patrons who have printed it in both materials:…
I've created a compensator for airsoft pistols inspired by some real designs. On an airsoft pistol, it serves purely as a decoration. Pictured on my WE G19. It's modeled with the standard 14mm twist and works best with a short adaptor…
To print accurately measure and calculate shrinkage of materials. Do not change e steps of measured parts. Simply print it then measure it and let Excel calculate XY shrinkage and hole compensation. Then type calculated values to your…
Fixed the glock compensator (wasn't slicing properly in Cura) and made the rail attachment stronger. Print instructions Unassociated tags: John Wick Category: Sport & Outdoors
Höhenausgleich für das Nähen dicken Stoffes damit der Nähfuß nicht so stark kippt und leichter auf den Stoff fährt. Die beiden Teilen klippen zusammen. Height compensation for sewing thick fabric so that the presser foot does not tilt so…
some fixes more sturdy rings for better grip in plaster better printable no support needed any more based on Putzausgleichsring-Fabrik -- spacer for pattress box factory https://www.thingiverse.com/thing:4332330 by Johann_LA May 02, 2020
I've created a compensator for airsoft pistols inspired by some real designs. On an airsoft pistol, it serves purely as a decoration. Pictured on my WE G19. It's modeled with the standard 14mm twist and works best with a short adaptor…
I needed a set of brackets to run the input shaping tests on my Ender3 V3 KE, and Creality makes you sign up for an account… which bugged me. So I signed up, downloaded the files, and I'm posting them here in case anyone needs them. Lord…
It is the tested competitiv version of Modified Nintendo Switch Joy-Con grip (remixed). No supports. First uploaded here: https://www.thingiverse.com/thing:2769344 It was tested multiple times in some rounds of Don't drink and drive. New…
Hello, this is my compliant XY compensation device. It has a theoretical compensation stroke of 4 mm and is a further development of the XY Linear Guide . It is useful if you're e.g. a student and want to experiment with robotics. It does…
Although both pistols are from the same manufacturer and share the same characteristics, there's a slight change in aligment, hence the two versions. It replaces the piece at the end of the barrel. 3 seconds to swap on the R27 but it…
Remxed to fit a UMAREX VP9 airsoft gun.
Compensator from the movie "The Professional" for my Halloween costume. Not exact, but close enough. Made to fit cheap but realistic $20 airsoft beretta https://www.amazon.com/gp/product/B005116PFM/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
Hello! This is a dual port compensator for WE Tech / SOCOM Gear 1911 Airsoft pistols. This compensator replaces the factory barrel bushing which allows the barrel to slide through the compensator, as well as sit flush with the slide. I…
Most FDM printers will make parts larger than they should be in the X and Y directions. This "XY expansion" can be undone in your slicer settings, but it is difficult to know exactly how much to offset this expansion. This is where the XY…
Wer kennt es nicht, da wird ein Loch mit einer Lochsäge vorbereitet und die Hohlwanddose hält, weil das Loch etwas größer ist. Dafür gibt es Ausgleichsringe wie diesen. Einfach darüber stülpen und schon wäre ein Problem gelöst.…
English: The height compensation tool makes starting on thick fabric edges or sewing over thick seams a breeze. The presser foot is no longer uneven, so the seam is even and transportation is optimal. The tool has a thick and a thin side…
A print to check the effects of ‘Hole Horizontal Expansion’ (Cura) / ‘X-Y Hole Compensation’ (OrcaSlicer). The rectangle should measure exactly 100mm X 30mm. Holes are 25mm, 20mm, 15mm, 10mm and 5mm. Once printed, use a pair of calipers…
This model is a test print to test if your elephant foot compensation settings are working properly. This design has varying interior and exterior angles which makes it perfect for elephant foot testing. PRINT SETTINGS: Bottom Layers: 3…
FRC Team 1759 comes to help! Want to look professional with a clean looking battery when you go to competition? These are just what you're looking for! These battery caps will cover the terminals of your battery preventing any sort of…
this body is made to fit on the custom lcg chassis by N0_Lan ( the betty version) in the files is inlcuded fuel tank for mounting a magnet also there are fender that i made but they are not included in the picture ! happy printing , in…
THIS PROJECT IS STILL ON PROGRESS, WILL BE UPDATED PERIODICALLY. This is the design of a Competition RC Rock Crawler for the Super Class competition category. This kind of RC cars are not designed for speed they are designed to climb over…
A mount I made for a robotics competition that works with the Limelight 2+. This is an all-in-one vision processing camera using reflected light so the robot can identify its surroundings. I am not sure if the dimensions are the same for…
EDIT1: uploaded a V2 version for Y belt 10mm from my original mod. Step file updated too EDIT2: Tbgs Carriage is complete, the step file is avaible, the mod is on testing, after some tests the stls will be relased IMPORTANT UPDATE…
My mother, sister, niece do sew all and much. Ma asked me a while ago if I could do something like that. I could and she was happy. I just forgot to publish this little tool. It was only 1-2 years ago ;-) I printed this with a 0.4 mm…
BMW M4 Competition This 3D model is a flat, minimalist silhouette of the BMW M4 Competition, designed as a decorative piece. The model represents a stylized front view of the iconic sports coupe, emphasizing its signature kidney grille,…
The Kettlebell is hollow inside to provide for individual weight filling. If filled with iron pellets a total weight of ~26Kg can be reached. The intention is to mix iron pellets from https://ballast-produkte.de/gemahlenes-eisenerz/ with…
* Note this 3mf file should be printed with SuperSlicer! This model contains all settings and parameters suggested by Klipper official docs . Suggested layer height is 0.2 or 0.25 mm. Infill and top layers can be set to 0 . Use 1-2…
This pouch fits in with the system here: https://www.printables.com/model/358633-double-stack-race-mag-pouch-canik-glock-mp-cz-sig created by @CadeyzDad You must download the other parts of this system from the original page above for it…
These nut inserts/addons correct the pitch of the open notes, making tuning easier and intonation more precise. This is a prototype and it works for me. YMMV, edit the source code to adapt to your instrument. There's one macro for…
Most FDM printers will make parts larger than they should be in the X and Y directions. This "XY expansion" can be undone in your slicer settings, but it is difficult to know exactly how much to offset this expansion. This is where the XY…
What this project is all about Competition Pro joysticks from the eightys are known to be great and durable devices. Compared to their competitors they were great! However, they were by far not as good, as they could have been! The…
This is an insert / organizer for the Obsession Victorian Box (big box) with the playmat, consolidated rules compendium, and all the released expansions through Characters (but see the excluded, mostly redundant items listed below). It…
This is a remix of https://www.thingiverse.com/thing:5470246 but I cannot tag models from a different website. I noticed Chisato's compensator had fewer, but longer spikes on the front and ports in the top hexagonal section. So I made a…
This is an over the top style mount for the VH-109 FRC radio. It was designed to not cover or interfere with any functionality of the radio. Lights are visible and ports are clear. Minimal amounts of the radio are covered to allow air…
If you enjoy my work, you can support me with a small contribution ☕ It really helps me keep creating and bringing everyone’s ideas to life: https://buymeacoffee.com/teo_211
BMW M4 G82 Competition This design can be scaled to any size in your slicer. Print flat with ~5% infill to save material. Perfect as: wall decoration desk decoration gift for fans Category: Signs & Logos
This is a model of a Dehler 38 sq competition.
Description When using red dots, the proper way to aim is with both eyes open. This cover will force you to do that by blocking view through the window. When aiming with both eyes, you should simply see everything and you don't notice…
this cool polygon with a honeycomb pattern through it is perfect for hanging in the water full of bait to attract fish. the lit is made to be fastened down with 2x M10 bolts perferably with a washer but you can print M10 wing nuts as well…
NON-AFFILIATE LINKS: Coustom scope riser for the Begadi "Competition" scope:…
Just a fun thing for the gun. With rail for attachments. Print Settings Resolution: 0,16 Infill: 10 Category: Other
This model comes in four separate parts. The shapes have hexagons cutouts that line up with pegs on the base for easier assembly. There is a blank version of the base for customization, along with a 2023 finalist version. I wasn't able to…
I designed a prize model for you that you can print and use in the fun competitions you organize. I hope you like it. Note: I recommend using your printer’s standard settings.
About This design is heavily influenced by the design by Weedhaze , but my own. Each organizer holds one Fireboard Competition or ambient temp probe . It is designed to securely but not overly tightly hold onto the probe and wire. It also…
There are already some Competition Pro clone joysticks on the internet, but I thought I'd build my own version. Whether it's better than the others... I have no idea... ;) Support is needed for the Top component.I have added some support…
A cover for the popular limelight for FRC with all cutouts. Very easy to print, provides good protection.
Print with default settings. Printing on MK4 with input shaper takes about half the time compared to MK3S
Model is print oriented and doesn't require support. Should fit tightly over the original boxer muzzle. I included a fitment test that I recommend printing first. If too tight or loose, adjust the scale of the compensator in your slicer.…
Sight rail mount printed out of PLA with 50% infill. Compensator printed out of ABS like resin but could also be printed out of PLA. Used 2 M3 X 30mm screws to attach sight rail mount to compensator. On closed side of sight rail mount…
Another remix of the brilliant Competition Pro Joystick by maciek717 . This one does not suffer from the deformation other remixes have. I am using these uxcell Rubber Strain Relief Cord Boot Protector Sleeve Hose 34x9x6mm 10pcs that I…
Mini Sumo Robot Chassis, 10x10cm, for competition. This chassis has holes for M3 brass inserts with a diameter of 4.2mm. This chassis can use rubber bands with a maximum measurement of 30mm. It also has M3 x 25mm screws, which I highly…
Fireboard Competition Probe Holders Donations: paypal.me/weidhase ***UPDATE: New model for long comp probe with new plug- can cable storage. Provided STL files are for your personal use only. - the „normal“ versions have a cavity to hold…
Custom compensator for UMAREX P99 DAO airsoft pistol, i just made something i liked the look of, it is not really based off of any real compensator. Needs an M4 nut and screw (i used nylon screws), i also removed the orange tip from mine…
The Gorilla Tag Competitive logo converted to a three color coaster. Keep in mind this print requires a printer capable of printing in four or more colors at once given there are four colors on many layers. Printed on Bambu Labs P1S with…
UPDATE 10/07/24: STL version now available after being on my Patreon forever. The Competition Pro is a legendary joystick from the early 80s created by Kempston Micro Electronics, the same company that produced the Kempston interface for…
UPDATE V2: Added small indents on each side of the barrel to give the darts more space to stick out. This is a remix of deusnefum's uncompensated hammershot mod that's made to work with hitchhiker4200's in-line cylinder. There is also a…
Earlier posted "Rotary Magnet Dispenser" had a magnet gauge to determe the magnet thickness. Reworked better version! As my "Rotary Magnet Dispenser" consists of different pieces (30° and 45°) "cake" segments, because of tolerances and…
my own creations of various creatures and monsters
BMW M5 — Detailed Scale Model A highly detailed model of the iconic BMW M5. Features accurate exterior bodywork including the M-Sport kidney grille, hood bulges, side skirts, and quad exhaust tips. The undercarriage includes mechanical…
In similar vein to the Warren Tactical Grip Assist, Magmo Edge Grip, and Atlas Step Grip, I designed my own grip to fit a 1911 that works with the same concept. I tested them in a USPSA match and found my original design to work decently…
Iconic Movie Moments - It Happened One Night - Hitchhiking Competition - 1934
Notes: I lost or gave away my compensator, so I used some image references online to create a similar one with my own style. The gas port slots go all the way around, but only the ones on the top 180° are open to the inside. The bottom…
Assembly video: Community on discord: https://discord.gg/ rWp2CKg
A Raspberry Pi mount I made for a robotics competition that is press-fit or screwed-on to attach the pi to the mount and zip-tied or bolted on to attach the mount to the robot. Has M5 holes for mounting. This mount is designed for the…
Replacement Piston Piece for HK MP5 AEG Competition cocking lever by Umarex (Elite Force). This part replaces the broken injection molded piece shown in the pictures. Note: you can also break the charging handle itself despite it being…
Prints well in PLA+ You will have to remove a thin layer from the inside for it to fit the barrel.
This is for fine tuning the elephant foot setting for profiles in Prusa Slicer. The squares are labelled with the elephant foot value being used for it. This helps with setting the right values in the slicer and for keeping track for the…
You need a silencer adapter in order to screw it on Print Settings Printer Brand: Anycubic Printer: All-metal Mega Rafts: Doesn't Matter Supports: No Category: 3D Printing
This is a tool for referees for the 2023-2024 VRC game Over Under. With it referees can measure: The height of the horizontal goal bars to ensure they are above the minimum specification (5.78") and below the maximum specification (6.03")…
The Smith Super Special (S3) is a competition funfly plane designed by Jerry Smith, released in the February 1994 issue of Remote Control Modeler Magazine (RCM 1162). This version is an electric, scratch built balsa plane, that I've…
This is a hinged deck box for MTG decks. It has a 60 card slot and a 15 bonus card slot. I have uploaded the box with many different logos from MTG on the base of the case. If anyone wants a different logo I do not currently have please…
1:1 model of a 24kg kettlebell, with a accent medallion. Perfect for your gym's next competition! Includes a designed cavity and plug to post-fill with sand to give it stability and heft. The handle is designed to be printed separately…
It will fit the 14mm CCW thread. 32mm outer diameter. To be printed vertically on front, without support Some materials have different shrinkage factor, and and printers have different flow settings, please make sure that your printer is…
A hook I made for a robotics competition that allows the robot to hang from a structure. Has holes to combine with an other hook to make it stronger and for attaching to an 1.5" by 1" aluminum extrusion with a ball bearing in order for…
When I was planning to mount my Skadis pegboard onto the wall in the garage, I discovered, that it is quite hard to drill the holes in the exact correct position. The Skadis pegboard already offers a compensation in the vertikal…
This is a clutch stop for the clutch pedal for BMW M2 Competition with 6 speed manual gear box. It might also fit other BMWs. This is used to limit the travel of the clutch pedal. This since in stock from there is lots of “dead travel” at…
This 3D-printed bolt-release shroud is designed to be installed beneath the bolt-release latch of first-generation Beretta 1301 Tactical, Beretta 1301 Competition, and Beretta A400 shotguns. Its purpose is to help prevent unintended…
Kill two birds with one stone for your new filament: maximize its print speed and ascertain its shrink rate. Do it all with less an hour of print time and no math required on your part. What is this for? These tests let you determine the…
A stand for the clock event at the WCA competitions so the clocks are better suited for the surface before inspection.
Changes: Included ring to cover the joystick parts on top Improved hole for 30 mm arcade button https://s.click.aliexpress.com/e/_Dm9IkSr so it fits better (no key) Base is higher to fit: https://s.click.aliexpress.com/e/_DBvu3Wb without…
Use 1/4in Chicago screws for mounting and retention. I'd recommend using something like PETG or PC Blend for durability attaches to any .75 in 2 hole mounts, i use bladetek.