Search results: cycl

Sort order

5,076 models

P
Printablesecoiras

Print-in-Place Kaleidocycle

A kaleidocycle that prints-in-place! No need to assemble anything; the kaleidocycle comes out of the printer bed ready to use. And no need for supports either. Enjoy! Print instructions The models shown in the photos were printed in PLA.…

Downloads
9,779
Likes
1,915
Rating
4.87

PET Bottle Self-Watering Attachment - PET Bottle Upcycling

— Updates — 27/08/2023 - Okay, I've had quite the busy year 😅 So I'm finally getting around to creating lower flow versions as well as looking at different threads and integrating washers for a tighter sealed fit. Should be around a month…

Downloads
2,712
Likes
482
Rating
4.85
P
Printablespressi

Cyclone Vacuum Dust Separator with Built-in Pressure Relief Valve

Need a custom adapter for your cyclone separator? Comment the required inlet and outlet dimensions and I’ll make and upload it for you. This 3D-printable cyclone separator efficiently removes dust and debris from your vacuum system —…

Downloads
1,457
Likes
313
Rating
5
P
Printablestrendspoke

Cargo Cage - Bicycle Fork

Up to 3 Adapter to mount it properly. (I use cork tape to keep it perfect in place.) You can use cable ties or 15mm hook-and-loop band. CargoCageForkAdapter.stl is for a 43mm fork. Let me now if you need a different diameter. Update:…

Downloads
1,221
Likes
345
Rating
5
P
PrintablesFabrizio

UPDATED American Touring Motorcycle Oil Filter drain pan

drain pan to avoid the oil from filter messing up the engine front. the new version with an enlarged hose fitting an better coverage under filter's housing

Print approx. €9.15–€11.18 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
1,051
Likes
80
Rating
4.67
P
PrintablesOld Machinist

KTM Husqvarna Gas Gas Motorcycle TPI 2-Stroke Oil Fill Cap Sleeve

Sleeve that slips over the 2-stroke oil fill cap that reduces the build up of dirt to the underside of the cap lessening the chance of dirt being introduced into the oil tank during oil fills. Print simply slides over the top of the cap…

Print approx. €0.70–€0.85 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
910
Likes
44
Rating
5
P
PrintablesTomM

Nested Hypocycloid Spinner Fidget Toy

Created as a physical representation of nested hypocycloids . The .gcode was generated with the model scaled to 75% because it makes it a nicer size for fidgeting. If the nested version comes out fused together, you can download the…

Print approx. €2.31–€2.82 excl. taxPreliminary estimate for one variant

Downloads
582
Likes
94
Rating
4.5
P
PrintablesORDEEP

Honda Motorcycles Magnet

Refrigerator magnet. Requires 2 x 20x6x2mm magnet. It has two versions, one with cutouts for magnets and the other without so that it can be modified for other magnet sizes.

Print approx. €1.20–€1.47 excl. taxPreliminary estimate for one variant

Downloads
554
Likes
69
Rating
5
P
PrintablesJohnM

Roadlok motorcycle disc lock pin carrier

The Roadlok is an excellent motorcycle lock, and the locking pin is extremely easy to fit under the seat or in a jacket pocket. Here's a review of it:…

Print approx. €1.51–€1.84 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
457
Likes
15
Rating
5
P
PrintablesShoaib Khan

Print approx. €4.11–€5.02 excl. taxPreliminary estimate for one variant

Downloads
456
Likes
121
Rating
5
P
PrintablesJernejP.

Motorcycle chain cleaner MK1

So this is the first prototype of my fully 3D printed motorcycle chain cleaner. Brushes and straps are printed in flexible materil (i use basic TPU) for the body i used Prusament PETG. I will upload new iterations as i develop them.

Print approx. €4.43–€5.42 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
383
Likes
142
Rating
5
P
PrintablesRob

V-Slot Racer - Recycle Your Old Printer Parts!

I designed this for the Toy Cars Competition. Having recently replaced my very slightly worn V-Slot wheels on my 3d printer I'd been looking for a use for the old ones. The car is a simple easy print. 20% Infill and 0.2 mm layers is fine.…

Downloads
365
Likes
305
Rating
5
P
PrintablesLeokaldzik

Bicycle holder for the JBL GO 2 speaker | JBL speaker mount

!!! To avoid scratching the frame, it is best to line the center with something soft (old handlebar tape, bicycle inner tube). !!! Maximum pipe width 40mm, height depends on the screws used (you can print) Sample link:…

Downloads
251
Likes
93
Rating
4
P
PrintablesRyanGuy

Cyclone in a Two Liter Bottle

Create a cyclone in two two liter water bottle.

Print approx. €0.70–€0.85 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
206
Likes
75
Rating
4
P
Printablescurcuz

Motorcycle Helmet Hanger with keys hook

keys hook version of "Motorcycle Helmet Hanger" by @MrBone66_567

Print approx. €2.22–€2.71 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
182
Likes
17
Rating
5
P
PrintablesBlackFury

No Logo & Thicker Motorcycle Kickstand Extender

This is a remix of John's card to put under the kickstand when parking on soft ground. As per original description: “If you lose or forget it, you can just print another one.” As the original was too thin, I created a thicker one. While I…

Print approx. €1.36–€1.66 excl. taxPreliminary estimate for one variant

Downloads
178
Likes
16
Rating
0
P
Printables3D-Fuchs

Phone stand - Aprilia RSV Motorcycle

This is a remix for Aprilia RSV motorcycle fans Phone stand: v1-1 is suitable for devices with a total thickness up to 10mm v2-1 is more stabile and suitable for devices with a total thickness up to 16mm all versions with cut-outs for:…

Downloads
167
Likes
25
Rating
0
P
PrintablesTol

YF007-5 MTB Cable Guide for front/rear derailleur (Bike, Bicycle).

This is a variation of the YF007-5 Cable Guide for bicycle frames that use bottom pull front derailleur. Printed with PETG. Looks and feels reliable, but real durability was not tested yet as I don't ride my bike in Winter. Recommended…

Print approx. €0.71–€0.87 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
131
Likes
14
Rating
5
P
PrintablesTocache

Case for Altera Cyclone II EP2C5T board

This is a case for the Altera Cyclone II EP2C5T FPGA board EDIT 08-09-2019: Updated design, now the holes and inline with the ones on the PCBs, download v5. Print instructions Used the enforcer slab option for the support region (the JTAG…

Print approx. €1.72–€2.11 excl. taxPreliminary estimate for one variant

Downloads
127
Likes
6
Rating
0
P
PrintablesRaKote

Wall motorcycle stander holder

Print instructions Print Settings ============== Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: Yes Resolution : 0.3 Infill: 99% Filament : Devil Design PET Notes: You can use other material if you want Standard for 0.4…

Print approx. €4.26–€5.21 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
122
Likes
41
Rating
5
P
PrintablesChristian

Lampenhalterung Fahrrad / Bicycle flashlight Mount

English below. Halterung für eine Taschenlampe mit Durchmesser 30 mm, und Lenkerdurchmesser von 31,8 mm (1 1/4 Zoll). Es wird zusätzlich benötigt: Senkkopfschraube M3x30 Senkkopfschraube M3x15 selbstsichernde Mutter / Stoppmutter M3, 2…

Downloads
103
Likes
46
Rating
0
P
Printablesgizmojim

Train mold (2 part) for recycling crayons

A fun way to recycle those old and broken crayons you've got stuffed in some bin. Each train needs a bit less than 1.4 inches of crayon (standard diameter) - not counting what stays in the melting pot or cup. Prep: Print both halves (STLs…

Downloads
81
Likes
10
Rating
0
P
PrintablesPeter Farell

Math Art : Strange Attractors : The Thomas' Cyclically Symmetric Attractor

The Thomas' Cyclically Symmetric Attractor is a fascinating example of a strange attractor that exhibits chaotic behavior with a unique symmetrical structure. It was discovered by René Thomas, a Belgian biophysicist, in the context of his…

Downloads
77
Likes
20
Rating
0
P
PrintablesBID3D

Better Bicycle Stand

Better bicycle Stand Added bulges to two areas and four zip tie slots. The design improvements of the bulges and zip tie slots will allow the stand to be securely positioned for usage whilst the bike is still upright. Then when the bike…

Print approx. €9.07–€11.08 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
75
Likes
12
Rating
5
P
Printablescrasbe

Recycling Fabrik MultiSpool Remix (Tighter and with Screws)

This is a remixed version of the original Recycling Fabrik MultiSpool, utilizing my Prusa Spool core for Recycling Fabrik Refills. The side pieces are thicker and the refill is held much tighter by the spool than by the original…

Downloads
72
Likes
14
Rating
5

Valve cup with hearts for bicycle or car

Valve cup with hearts for decoration of your bicycle or car. Attached STL file and two GCODE files for MK3S printer - one classic, but other with colour change - printer automatically stops for filament change.

Downloads
69
Likes
18
Rating
0
P
PrintablesBooks

Recycle Symbol Coin

Coin with a recycling symbol engraved in it. Bill Loyd and Gary Anderson designed the recycling symbol. The recycling symbol is in the public domain and is not a trademark. The solid recycling symbol is unicode character U+267B .

Downloads
68
Likes
2
Rating
4
P
PrintablesJB

Gazelle bicycle mudguard fastening clip / spatbord klem

This part replaces the top part of a mudguard holder on some models of Gazelle (children) bikes. I hope this helps for someone. This is only the upper part. The part most likely to break. Included is the Fusion360 archive to help you get…

Downloads
59
Likes
20
Rating
0
P
PrintablesJoeBranch

Shopvac to Dust Cyclone Adaptor

Simple dust cyclone to shopvac hose adaptor. This allow to connect the “standard” amazon dust cyclone to the “standard” ridgid type shopvac hose! Don't forget to post a photo of the modele you make here in the Makes & Comment section to…

Print approx. €3.01–€3.68 excl. taxPreliminary estimate for one variant

Downloads
59
Likes
10
Rating
0
P
PrintablesZbyněk Král

Mini Recycle Bin

Print instructions: I decided to use PETG. Printing the model does not require any special settings. See the attached 3MF file for detailed print settings. Supports recommended. Part List: Printed Body [x1] Printed Cap [x1] Neodymium…

Print approx. €1.78–€2.17 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
52
Likes
16
Rating
0
P
Printablesdjedje_zr7

Motocycle case carrier clip for side bags

Remove support Add/glue rubber (in black below) to prevent the parts from sliding (rotation) on the metal support Tighten with M4 six hex screw and nut

Downloads
49
Likes
14
Rating
0
P
PrintablesOBConcepts

Zero motorcycles rear fender hole blocker

Whenever I was riding on the zero motorcycle and there was mud on the road, I would find myself having to clean the rear braking light constantly. When you have the brake light covered in mud, it is really dangerous as other drivers wont…

Print approx. €1.22–€1.50 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
47
Likes
10
Rating
5
P
Printablesgravity

Bicycle Parts

Update 25.08.2023: Added Tire Changer model (untested) Added Bar End Caps model Added Lamp Mount Tire Changer (untested) A tool which helps to remove tires from the rim. You'll need two of them. Be careful because usually much force is…

Downloads
46
Likes
11
Rating
0
P
PrintablesMatis_STL

Cyclonic dust collector

2 versions available : Version 1 (Not fully printed) includes 4 parts : Common parts : “Cyclonic cone” “Karcher WD3 KWD3 Hose adapter” (if you want to plug this hose) “Bell mouth” “Hose clip” Version 2 (Fully printed) includes 4 parts too…

Downloads
44
Likes
15
Rating
0
P
PrintablesFoxVirus

Keyrack motorcycle, home, bicycle, car

When i was looking for a fitting key holder for various keychains of mine, none were eaxactly what i was looking for. I remixed a few Printables with their shapes and designed a backboard with custom key hooks, which resulted in this…

Downloads
43
Likes
9
Rating
0
P
PrintablesF3DX

Motorcycle registration holder for Spanish plate - Portamatrículas de moto

Motorcycle license plate holder for Spanish plate Materials: 4x insert M4 4X screw M4 x 10 2X insert M3 2X screw M3 x 20 2 pins Ø 3mm

Downloads
34
Likes
10
Rating
0
P
PrintablesSilvenga

EIBOS Cyclopes Accessories

Introduction This is an accessory pack for the EIBOS Cyclopes. A handle that connects to the top using two of the seven mount holes. Plugs to plug the 10 filament holes. A M6 washer to connect a PC4-M6 PTFE Tube Connector to one of the…

Print approx. €0.09–€0.11 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
31
Likes
4
Rating
0
P
PrintablesKrakHedKorps

Pulsar Puffco Peak Pro Hydroslide Recycler Base

I recently made a safe stand to place my Pulsar Puffco Peak Pro Hydroslide Recycler Top Glass on when not in use or storing it away. The way I designed it makes it fit nicely, and the base platform keeps it from tipping over. I think it’s…

Downloads
29
Likes
5
Rating
5
P
Printablesillumeo

Motorcycle Michelin tyre pressure monitor / gauge mount

A mount for a Michelin motorcycle tyre pressure monitor / gauge The clip is a separate part so it can be made to fit different circumferences. Fusion file for the clip included. Print instructions Category: Automotive Summary A mount for…

Print approx. €1.45–€1.77 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
28
Likes
2
Rating
0
P
PrintablesAndreas_O

Earring holder Prusament spool upcycling

I wanted a way to store/display earrings. So I mad a upcycling Model for the Prusament spools. I used a suction cup to mount the holder on the mirror (as shown in the picture). I tried to print one in flex but it didn't work. There is a…

Print approx. €2.20–€2.69 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
26
Likes
3
Rating
0
P
PrintablesChevdor

Tire Cap for Puky Kids Bicycle

A model to print 5.5mm caps for tires for a kid-bicycle

Print approx. €0.12–€0.15 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
23
Likes
5
Rating
0
P
PrintablesPieter Koenen

LED Halo Clamp For Additional Motorcycle Lighting

My son wanted to pimp his motorcycle by adding an additional set of lights. On top of that each light would be pimped as well by adding a LED Halo. This model combines the following functions: A holder for the LED Halo (no glue required…

Print approx. €1.26–€1.54 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
20
Likes
18
Rating
0
P
PrintablesVanruxxx

Recycling Flower POT from 1 Liter Pet Bottles

A Way of eliminating waste Plastic in Daily Household Try to come up with a simple Jet hopefully beautiful design to mimic a Flower (Pot) The small Pilot holes are Designed to Glue or Wire the Part in Place " Have Fun Watch your Water…

Downloads
20
Likes
3
Rating
0
P
PrintablesARCHBW

Vitamix Food Cycler FC-50 Coaster

Tired of getting your countertop scratched when using the Vitamix FC-50 container as a compost bin. Try out this coaster that is custom sized to the bin's bottom at 6.5" plus a .25" rim to hold it in place. Let your compost coast!

Print approx. €4.00–€4.88 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
19
Likes
2
Rating
0
P
PrintablesArnaud

Bicycle pump holder

I made this mini bicycle pump holder for the cheaper Decathlon's hand pump. It goes in place of the second bottle holder.

Downloads
18
Likes
4
Rating
0
P
Printableskiam02

Bicycle rear light nut cap M5

Bicycle rear light nut cap M5 I think it's nicer with bicycle rear light nut cap M5 than a screw! The black also matches the lamp. It also holds really firmly. You don't need any tools and screw the cap until it is tight. The design was…

Downloads
17
Likes
2
Rating
0
P
PrintablesMichaelQ

Bicycle Tail Light for Stromer Seat Post

Stromer bikes use a special aluminum seat post adapter that has a beveled collar on the top edge (the last of the photo shows the original part). This beveled collar could also be used as a taillight. The idea came from one of the…

Print approx. €0.55–€0.67 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
13
Likes
1
Rating
0
P
PrintablesDave Tolnai

Light mount for bicycle rack

A simple mount for a rear rack to allow for easy mount of a taillight. Mount is 30mm in diameter which should split the difference nicely between larger/smaller seatpost style mounts. I printed in PLA w/ supports. Model uses two 5mm heat…

Downloads
12
Likes
0
Rating
0
P
PrintablesThePes76

Print approx. €0.74–€0.90 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
12
Likes
2
Rating
0
P
PrintablesBenoît Lussier

Bracket to hold a luggage rack on my Escape Giant bicycle

I designed a bracket to hold in place (preventing rotating) my metallic luggage rack on my Escape Giant bicyle. I got a failure of the bracket installed by my original vendor. I printed it in PETG.

Downloads
12
Likes
3
Rating
0
P
PrintablesCarlow Dysigns

Bicycle Front Rack Light Mount - Nitto SimWorks Obento

This is a front light mount for a bicycle equipped with a Nitto Lamp Holder , used on the SimWorks Obento front rack. It's similar in mounting to a Paul Gino and other light mounts, however it's intended to use a stem cap to mount it…

Print approx. €0.51–€0.63 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
11
Likes
0
Rating
0
P
Printablesidona

Mini 10-Tooth Cycloidal Gear Replacement

This is a small replacement gear featuring a 10-tooth rounded cycloidal (flower-style) profile , recreated from the original part using caliper measurements and reference photos. Specifications 10 rounded (cycloidal) lobes Outside…

Print approx. €0.08–€0.10 excl. taxPreliminary estimate for one variant

Downloads
11
Likes
2
Rating
0
P
PrintablesJoe

A simple Day and Night medication cycle reminder

Assuming that you've printed yours with one side in Black and the other side in White; after taking your daytime medication, flip it over so that it shows the Black side to indicate your next medication cycle. The included gcode is set to…

Print approx. €0.07–€0.09 excl. taxPreliminary estimate for one variant

Downloads
7
Likes
2
Rating
0
P
PrintablesMonkeyMK

Motorcycle rearview cap

Motorcycle rearview cap M10 left thread and M6. Create the possibility to close the hole of the originale mirror on your bike with a screw. I suggest to glue the insert on a screw, then screw them in the hole of the mirror.

Print approx. €0.34–€0.41 excl. taxPreliminary estimate for one variant

Downloads
6
Likes
1
Rating
0
P
Printablesshaakunthala

Buffer Attachment for HOMCOM Bicycle Trailer [PETG]

I recently purchased a bike trailer (also known as fietskar/ Lastenanhänger). Its frame is made of 20 mm diameter metal pipes. (EAN: 4251774961240) I designed this “clamp and insert” buffer attachment to protect the frame paint when I set…

Print approx. €1.67–€2.05 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
6
Likes
0
Rating
0
P
PrintablesFearless

Motorcycle Helmet Hanger for ratchet type straps

My helmet has no D-rings and I needed a way to hang it on the bike. Direct fitt for first Gen WeeStrom, but worked on my TransAlp and will probably fit others. Ratchet works with my Schuberth and, again, will probably fit others.

Downloads
5
Likes
1
Rating
0
P
PrintablesFloris_Caris

Cat Bicycle Lighting Knog Binder

Is the silicone strap on your Knog Blinder broken yet? If so, I've designed a case that allows you to attach the Knog Blinder to your handlebars without having to rely on their faulty silicone strap system. All you need to do is buy some…

Print approx. €1.36–€1.66 excl. taxPreliminary estimate for one variant

Downloads
4
Likes
3
Rating
0
P
Printablespaw3D

Cut Fir Twigs Christmas Tree - Upcycling

Purpose Cut fir twigs are a commonly available waste product during the christmas season. Instead of throwing them away, they can be upcycled into a beatuiful christmas tree. Hardware Part Quantity PLA or any other non-flexible ~240 g…

Print approx. €8.43–€10.30 excl. taxPreliminary estimate for one variant

Downloads
4
Likes
2
Rating
0
P
Printablesthrutheframe

Bambu Lab Magnetic Chute Cover, Poop Management System, Recycle Cardboard bin

Update 11 Jul 2023: It has been a year since I designed the PMS (Poop Management System) for Bambu Lab printers. So many things have changed and so much development in the way we approach slicing & printing. I am doing an update and also…

Downloads
13,713
Likes
1,950
Rating
4.94
P
PrintablesLHB

Cyclone Dust Collector

Cyclone dust collector. Can be printed in two parts on the Prusa Mini! Bouth parts have a rim to be fitted together neatly. PrusaSlicer Files have all the necessary supports!

Downloads
7,394
Likes
825
Rating
4.8
P

Cyclone Dust Collector

Cyclone dust collector for a 2.5" hose. Made to be as large as could be on a Prusa i3 mk3s. I used m3 hardware to put the top and bottom together but glue would work just as well. ¼-20's for attachment to the bucket. I put this on top of…

Downloads
7,246
Likes
1,000
Rating
4.86
P
PrintablesTmpx64

Bicyle / Bike Keyring / Keychain - Key Charm - quick and easy print - Gift idea - Road Cycling - bike lock - last meters - Gift inspiration - End of roll

Great small gift idea for bike lovers or demo print for newcomers. Prints fast & Easy. The ones is the pic are 0.4Lh. If you feel this is too small for your liking, feel free to modify scale in your slicer software. This is very quick and…

Downloads
7,212
Likes
1,273
Rating
4.92
P
PrintablesRACBOTS

Casco Moto Llavero - Motorcycle Helmet Keychain

Llavero de casco de moto para decorar tus llaves o accesorios. Tamaño: 21.92 mm x 31.39 mm x 21.51 mm

Downloads
5,757
Likes
557
Rating
5
P
PrintablesMichael

Prusament upcycle Frisbee

Ready for summer! Easy-to-print Frisbee Disc. The Frisbee flies very stably and well through the air. The holes in the Prusament disc make it ideal for short-distance use. The compact build makes it very travel-friendly. The size and good…

Downloads
5,443
Likes
2,480
Rating
4.7
P
PrintablesJRT3D

The Recreator 3D - Community Bottle Cutter - RECYCLE - PET#1 - Plastic Bottle

Recreator3D.com – Turning PET1 Bottles into Filament with Repurposed 3D Printers We’re not just recycling—we’re recreating . At Recreator3D.com , we’re transforming PET1 plastic bottles into high-quality 3D printing filament using…

Downloads
5,377
Likes
551
Rating
4.78
P
Printablesboomke

motorcycle helmet holder

Did find this model on thingiverse very handy for placing ur helmet niceley on the wall. Gcode provided is with Amazon Petg ! be care full. printed with 6 perimeters and adaptive cubic infill or Gyroid 60% more models for this hook in…

Downloads
4,881
Likes
578
Rating
5
P
PrintablesBootjevaarder

Motorcycle Roller Chain Key Ring

General Another keyring for gearheads! Pick your motorcycle brand and engine configuration. Print the roller chain, the sprocket holder and the name plate/configuration plate in your favourite color(s). Printing I printed the model on a…

Downloads
4,624
Likes
1,737
Rating
4.88
P
PrintablesBootjevaarder

Motorcycle Key Ring

Pick your motorcycle brand and engine configuration. Then print the two key ring halves and dowels of your choise in your favourite color(s). Glue the dowels in one halve, and glue the two halves together. Ride safely! Related Model…

Downloads
3,799
Likes
894
Rating
4.87
P
PrintablesPuhsketti

Mobius Kaleidocycle box (kinetic ring box)

A neat box with a unique opening mechanism. Follow the original inventor on Instagram https://www.instagram.com/degreesoffreedomco And visit their website! https://www.enjoydof.com I reverse engineered this model by watching this reddit…

Downloads
3,597
Likes
354
Rating
4.75
P
PrintablesTmpx64

Motorcycle / Motorbike / Scooter / Moped Keyring / Bike Keyring/Keychain - Key Charm - Gift idea - Gift inspiration - Klíčenka skůtru

One for every kind. Simple and fast to print. Just attach it through one of the wheels as shown in the picture. This is a very quick and easy print and a great way to use up the last meters of your filament. If you are looking for a…

Downloads
3,384
Likes
446
Rating
5
P
PrintablesAdam L

SpinCycle : Keep every spool dry, For Bambu X1 /P1P AMS and Print-from dryboxes

Update 2/19/2023: Added no-water-drops design for Top and the Default Jar Size per user comment/request (top/bottom text remains). Update 2/7/2023: Added a 12 mm-shorter version per user request. This model is designed to make storing and…

Downloads
3,267
Likes
733
Rating
4.92
P
Printablesmroek

The Cyclone: triple lift, triple track marble machine

This is a marble machine with a lift that lifts three (or more) marbles simultaneously, and releases them to three separate tracks. Two of those tracks are connected in series, so a marble will therefore alternate between those tracks.…

Downloads
3,144
Likes
605
Rating
4.92

Cyclo valve cover

Cyclo valve cover for 6 and 8 mm valves I recommend putting a collar around the valves so that they hold well on the printing plate

Downloads
3,097
Likes
805
Rating
4.94

Upcycled ATX Lab Bench Power Supply

I wanted to enclose everything into a single unit, so I made this. This project provides a reliable and adjustable power source without breaking the bank. You can complete the entire project for as little as $50! Converting an ATX PSU…

Downloads
3,079
Likes
1,591
Rating
4.89
P
PrintablesThomllama

Cyclone Vacuum Dust Separator. Version 4.1 (1 to 1-1/2" hose)

January 31-2025 Version 4.1 released! Version 4.1 is released! minor mods and tweaks! November 26- 2024 Version 4 release! (note - v3 and v4 lower cone is the same(NOT V4.1!!) , only the upper inlet/outlet section is new so you can reuse…

Downloads
2,991
Likes
469
Rating
4.7
P
PrintablesSL_ST

SL_ST TWO-STAGE CYCLONE SEPARATOR-01 Rudi

This construction is a logical continuation of one of the first options. The community likes it, apparently because of its low profile. It seems more stable. Our friend Der_Rudi asked to increase the gap for better throughput. Now it's…

Downloads
2,909
Likes
470
Rating
4.82
P
Printables3Diocrity

Motorcycle Throttle Stop (Cruise Control)

Modeled in F360 after the original Go-Cruise (now out of production), this is a throttle stop style cruise control for motorcycles. You simply roll the throttle back and press this against the brake lever. This is sized for a sport style…

Downloads
2,812
Likes
322
Rating
4.94
P
PrintablesFay3dlab

Mini Bicycle Kit Card

A few months ago, i sold my Polygon Bend R2 bike due to financial constriction and i wasn't cycling all that much.. As nostalgia memories kick in I began to think what i can make with the bicycle in mind.. and after a few days.. the mini…

Downloads
2,763
Likes
447
Rating
4.82
P
PrintablesNiffels

motorcycle chain lube thing for 520 chains

Print recommendations: PETG ist most likely the best thanks to it's slight flexibility 0.1mm or 0.15mm layer height recommended due to the small hole the lube goes through 3 perimeters work great. 2 is probably maybe also enough.…

Downloads
2,621
Likes
632
Rating
4.91
P
Printablesfgebhart

Ass Saver - Bicycle Mudguard

Perfect application for owning a 3d printer: Saw other cyclists having this hot mudguard on the back of their saddle. Looked it up and it costs about 10$. Since it is just a piece of plastic I asked myself - why not print my own version…

Downloads
2,590
Likes
394
Rating
4.88
P
Printablesptakos

Simple Recycle Bin (2026 Update)

Original version was printed in PLA on Prusa Mini+ with 0.2 layer, zero top layers and 4 perimeters. 2026 update (v2) – Updated version features a slightly thicker bottom and a bevel around the base for improved durability and handling.…

Downloads
2,588
Likes
230
Rating
4.86
P
Printablescmh

Bicycle disc brake caliper piston spreader

Wedge to press disc brake caliper pistons back into the caliper body during service. Print two, use them in a pair. Insert from opposite sides of the caliper, push them together, then use the finger holes to remove them. Quick and easy,…

Downloads
2,557
Likes
277
Rating
5
P
PrintablesMolodos

Parametric car/motorcycle license plate keychain (Nummernschild/Kennzeichen)

A parametric car/motorcycle license plate key chain designed to be printed on single filament printers with color change. Add a filament change in your slicer and swap the filament mid print in order to achieve a two color print. Features…

Downloads
2,532
Likes
454
Rating
5
P
Printablesxopn

Bicycle chain wear indicator

A bicycle chain gets longer, when it is worn. This tool helps detecting when is stretched by 0.5% and 1% respectively. Those are two key points to detect when a chain needs changing. 0% is the stretch of a new chain obviously Below 0.5% a…

Downloads
2,298
Likes
391
Rating
4.78
P
Printableskriswillcode

Portable Hypocycloid Drawing Kit

Have you ever wanted draw repeating geometric patterns at any time in any place? No? Well, let's pretend you did... This handheld print conveniently combines a drawing platform with a case for the gears and paper. It easily fits into a…

Downloads
2,226
Likes
492
Rating
4.97
P
Printableszbieraj

Bicycle Tire Lever

This is a bicycle tire lever created by Piotr Zbierajewski. Besides being a normal lever it has also 10 mm wrench for those few tensioners which still can be found in the bikes, as well as it has a spoke hook. It has been created with…

Downloads
2,223
Likes
237
Rating
5
P
PrintablesZbysekz

Motorcycle helmet holder

Design from https://www.thingiverse.com/thing:2504368 I have added supports - download slicer project in files. Printed in PLA - 0,2mm with 10% infill. It is very sturdy.

Downloads
2,220
Likes
309
Rating
4.88
P
PrintablesPugwash

Dummy 13 Motorcycle Helmet with Posable Visor

A motorcycle or racing helmet with optional visor. The visor can be opened or closed. You should be able to print the helmet without support if your bridges are good. It might need a little post processing if you get sagging filament on…

Downloads
2,120
Likes
471
Rating
5
P
PrintablesKingTut

Fidget Kaleidocycle Fidget

After a few failed attempts at trying to print ecoiras kaleidocycle I decided that I should try and design my own and so I did although I used the same features and design I constructed my own model from scratch, It is designed to be very…

Downloads
2,112
Likes
148
Rating
4.43
P
PrintablesMickey666Maus

Cycloidal Drive - 3D Printed Gearbox 40:1

Cyclodial Gearbox 40:1 with Tarot 4108 BLDC and CUI AMT102 capacitive encoder. Video assembly instruction available! Mounting instructions for the encoder There are also instructions on how to change the gearbox ratio...…

Downloads
1,972
Likes
175
Rating
0
P
PrintablesBostra

Motorcycle helmet hook.

Tisk je velmi jednoduchý. Pevnost je dostatečná z PLA, ale můžete klidně použít PETG. Tisk vrstvy 0,2-0,28. Tyto dva soubory jsou rozdílné pouze v otvorech na vruty, kde jeden je na plochou hlavu vrutu a druhý na zkosenou hlavu vrutu.

Downloads
1,902
Likes
295
Rating
4.94
P
Printableswollel

CHAIN LUBE Spray adapter Bicycle/Motorbike

Information: The width of the adaptor where chain pass is around 10 mm. Print settings: Step: 0.3 Shell: 3 Infill: 30% Supports: No Filament: PLA

Downloads
1,899
Likes
237
Rating
4.79
P
PrintablesTony

Bicycle playing cards box

Update: Added "no design" version of the box A simple box for storing Bicycle playing cards. My print settings: Resolution: 0.2mm Infill: 20% No supports needed I printed this using Devil Design Black PETG (I also attached the gcode…

Downloads
1,891
Likes
370
Rating
4.68
P
PrintablesThomllama

Version 3 - 4"/100mm Cyclone dust separator

Version 3- new, even bigger and better cyclone dust separator! This is still a beta! thou it is fully functional! Assembly info and such will be added later, newer versions of the top cap may get uploaded ** note- will need a 300mm build…

Downloads
1,856
Likes
258
Rating
5
P
Printablescmh

Bicycle saddle height measurement tool - "80mm point"

Reliably measures saddle height based on the point where the saddle is 80mm wide. I don't know much about bike fitting, and I've never been particularly good at measuring saddle height, so today when I saw Ronan McLaughlin share his home…

Downloads
1,834
Likes
152
Rating
5
P
PrintablesMiniFlow

Cyclops Skull Clicker | Spooky Fidget

⚡ CLICKFLOW – IMPORTANT INFO 🔧 Assembly Note: This model was tested using a blue mechanical keyboard switch . For a more secure and durable assembly, I recommend using a small amount of glue on the connecting parts to keep everything…

Downloads
1,830
Likes
405
Rating
4.91
P
PrintablesGerhard

Airbrush cyclone

This is a rework of my own model from thingiverse (from 2012). “cyclone to catch the spray while purging/cleaning an airbrush.” There may be some sputtering especially with airbrush nozzles bigger than 0.2mm. Prints without supports, a…

Downloads
1,827
Likes
468
Rating
4.79
P
PrintablesD3vil.Design

Cyclops Extruder

Cyclops Guide by ModBot ( Thank you for the great video ) Latest Update 22 September 2024: -Version 1.9.1 with better tolerance -PTFE tube connector -stronger tension arm ----------- Exciting News: Cyclops Extruder is Now in Open Beta!…

Downloads
1,811
Likes
396
Rating
4.33