Search results: degrees

Sort order

438 models

P

Parametric corner cable holder (90degrees)

Introduction Inspired by "Cable Corners... keep cables in corners!" by muzz64 on Thingiverse Fusion 360 parametric design This is for bend-sensitive cables, such as Cat 6 and Cat 6A. In the case of these cables, the curvature of the bend…

Downloads
3,091
Likes
2,234
Rating
4.93
P
PrintablesBlackFury

Drill Guide - Metric - 90/45 degrees and corner

This is a remix of Helasius drillguide - https://www.thingiverse.com/thing:4839621 However, I needed it to be able to drill on a square corner. As per the original description, it fits sizes 3, 4, 5, 6, 8, and 10, with holes at 90º and…

Downloads
2,891
Likes
444
Rating
4.96
P
PrintablesIvo

curve 180degrees hotwheels compatible

update 15-02-2024: added stl file without the support enforcers and original Freecad file 180degrees curve compatible with the orange Hotwheels track. to connect it to the track, 2 standard hotwheels connectors are needed. there is no…

Downloads
1,307
Likes
191
Rating
5
P
PrintablesMartin
Downloads
1,159
Likes
170
Rating
5
P
PrintablesMartin

Protractor 360 Degrees

360 degrees protractor Type Protractor Size: 150 x 150 x 1.50mm

Downloads
1,116
Likes
66
Rating
5
P
PrintablesPython-1

60 degrees heater bed cable cover

Less stress on the wiring and more gap for twisting than shorter model. Slightly longer (9mm) but less prone to insulation melting. Modified from original Prusa model files. Use with original clip

Downloads
1,096
Likes
147
Rating
4.93
P
PrintablesBootjevaarder

Eufy 2K (Battery Powered) Doorbell Wedge 35-55 Degrees

With this 45 degrees doorbell wedge you will be able to adjust the viewing angle of your Eufy doorbell camera. By adding the 5 or 10 degrees wedges you can extend the camera angle. You will need 2 extra small selftapping screws to attach…

Downloads
741
Likes
44
Rating
5
P
PrintablesMartin

180 Degrees Protractor For Angle Measurement

Type: Protractor Size: 150 x 84 x 1.50mm

Downloads
492
Likes
34
Rating
4.89
P
PrintablesMBLX

70º, 65º and 60º degrees angle triangles tool for triple monitors on sim racing setup

This is a tool to correct the angle for a triple monitors setup for sim racing

Downloads
491
Likes
28
Rating
5
P
PrintablesMich

90 degrees overhang with fullcontrol.xyz layer

***THIS IS VERY EXPERIMENTAL! I TAKE NO GARANTEE FOR WHATEVER HAPPENS!*** There are 3 different shapes: round, square and hex. Round works best, but square and hex are also nice… How to do it for the round shape : - open model in…

Downloads
364
Likes
70
Rating
4
P
PrintableskKdH

90 Degrees Bridge Ramp - Brio Compatible

A 90-degree bridge ramp for wooden train track that allows train cars to transition smoothly between different elevation levels while making a quarter-turn (90-degree) curve. The curved design makes this piece ideal for smaller play…

Downloads
248
Likes
57
Rating
5
P
PrintablesMartin

New 360 Degrees Protractor centimetre (cm) And Inch

Type Protractor Size: 150 x 150 x 1.50mm 360 Degrees Protractor 0 to 9 centimetre (cm) And 0 to 3 Inch

Downloads
210
Likes
26
Rating
5
P
PrintablesSpotmatic

30mm/0.2mm pinhole, (f150, 90 degrees) Pinhole Camera Cone for the Hasselblad film magazine mount

If you have printed https://www.printables.com/model/247783-hasselblad-film-magazine-mount-pinhole-camera-matt then you can print this cone and get a 30mm/0.2mm pinhole, i.e. f150, 90 degree angle pinhole camera. Material PETG, e.g by…

Downloads
192
Likes
38
Rating
0
P
PrintablesDedoper

Universal Car phone holder and mount 90, 180, 270, 360 degrees tiltable

Car phone holder and mount, universal Vertical for phone calls etc and pull up the pin to tilt the phone left or right

Downloads
152
Likes
30
Rating
0
P
PrintablesSgt_Sid

360 Degrees of Legos for your Decora or Standard Light Switch/Outlet!

360 Degrees of Legos for your Decora or Standard Light Switch/Outlet! I added a Lego fence (@Major_RedStar) to the Lego Decora light switch cover (@edZed) to create a 360-degree surface to attach Lego parts. Edited: I also added a Lego…

Downloads
112
Likes
82
Rating
0

Photovoltaic cable protector - 90 degrees

EN: Protection of photovoltaic cables with a diameter of 6-7 mm against penetration or breakage when routed through wall edges, metal roofing, etc. I recommend printing with supports in vertical position. CZ: Ochrana fotovoltaických…

Downloads
22
Likes
5
Rating
0
P
PrintablesJan Bic

3030 120degrees (or 45) connection stiffer

I was quite surprised how few of this 120 degrees connectors is available to download, for 3030 it was none, so here one is :) I printed it from pla (as i think it is not that bendable as petg), 0,25 structural, 5 perimeters 5 top and…

Downloads
18
Likes
2
Rating
0
P
PrintablesAttishu

Camera / TV VESA Wall mount 10 and 20 degrees tilt

Did you mount your Camera on the wall to record your work? The camera need a little extra tilt? Print this! In my case the DSLR camera is monted to record Youtube videos on our engineer station. But the camera was not in the right angle,…

Downloads
14
Likes
5
Rating
0
P
PrintablesDr.Enchanted

Drone Back Up Camera for 32mm Standoffs with 120Degrees of Movement

I recommend printing the one file given or use supports. This model REQUIRES plastic coated wires for their stiffness. Silicone wires are to pliable and don't preform well. Install servo, turn on servo and go to max and install the gear…

Downloads
12
Likes
2
Rating
0
P

reolink doorbell mount 35 40 45 degrees

i have 2 versions. 1 with 5.5mm holes for m4 brass inserts and if you don't have inserts you can pick the no insert version with 3.3mm holes so you can drive m4 bolts in it. i printed it on 0.24 layerheight 210/50 pla+ and 50%infill with…

Downloads
1,294
Likes
78
Rating
5
P
Printables3DRA

Creality K1 MAX PTFE guide 90 degrees

90 degree PTFE tube guide. Together with the guide, I used https://www.crealitycloud.com/model-detail/657e19d8937557724252afab , reducing the height to 50% and https://www.printables.com/model/734259-creality-k1-k1-max-ptfe-tube-holder I…

Downloads
1,221
Likes
111
Rating
5
P
PrintablesKillerN00bz

PETG Temp Tower for CURA 220-260 degrees

This is just a remix of cuzzea's work, eliminating the colder temps that won't work for my PETG (Hatchbox). This one goes 220-260, use cuzzea's exact instructions for setting up the post processing script. Nothing changes except the top…

Downloads
1,206
Likes
28
Rating
5
P
PrintablesMeuon

Kitchen Knife Sharpening Guide 17 Degrees

Fits a 66mm or less wide common sharpening block. Fixed at 17 degrees for easy operation. Very hard edge knives can take a 15 degree edge, cheaper common ones last longer at 20mm. 17 is a compromise angle used by many for a wider variety…

Downloads
1,039
Likes
474
Rating
5
P
Printablesthall72
Downloads
644
Likes
100
Rating
0
P
PrintablesThe Next Layer

Dyson V7 - V11 Drill Dust Collector - 180 Degrees Inverted

I really liked haitonno's design for this drill dust collector, but for some reason, it was "upside down" from what my Dyson would need. So, I flipped the button/lid around. Much better. I printed in 0.3 resolution, and the button broke…

Downloads
643
Likes
109
Rating
4.5
P
PrintablesJERYNSON

Universal design corner clamp (90 degrees)

Just a simple universal design corner clamp that i use for my woodworking jobs and it can also be used as a distance keeper for furniture building. For good resistance if you plan to use it a lot in the workshop, i recommend printing it…

Downloads
636
Likes
165
Rating
5
P
PrintablesBasementLAB

Pipe Notching Tool_Steel Pipe Coping Guides Coping jigs T 90 degrees - 30/60 degrees - 45 degrees - Maschera di tracciatura Taglio tubi innesto a T 90 gradi - 30/60 gradi - 45 gradi

Pipe Notching Tool_Steel Pipe Coping Guides Coping jigs T 90 degrees - 30/60 degrees - 45 degrees Maschera di tracciatura Taglio tubi innesto a T 90 gradi - 30/60 gradi - 45 gradi Pipe dimensions in mm/inches: Ø20, Ø25, Ø30, Ø35, Ø40,…

Downloads
628
Likes
134
Rating
0
P
Printablespex

Square / angle checker for Woodworking (45 and 90 Degrees)

1 x 45 degrees angle checker 1 x 90 degrees square Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.2 Infill: 50% Filament: Prusament PLA Grey Notes: Any material does the trick. Category: Hand Tools

Downloads
617
Likes
64
Rating
5
P
Printablestodbot

Desktop Synth Stand at 40 degrees, for Deluge, Elektron, etc

Most all the synth stand models I've seen are fairly low incline (20º-30º). I wanted something closer to 45 degrees. This stand is at a 40º incline. It's very much a "v1.0" design but it's been working well for me these last few days. The…

Downloads
608
Likes
42
Rating
5
P
PrintablesBasementLAB

DIN Rail Stand - Holder 75/90 degrees - Supporto barra DIN da Tavolo

Desktop DIN Rail Stand 75/90 degrees - Supporto barra DIN da Tavolo Dimensions 58x100x15mm DIN RAIL 7.5mm IEC/EN 60715 TH 35 - 7,5 15/07/2024 ADDED REV1 Resize/Scale to adjust dimensions If you download/enjoyed this file, please leave a…

Downloads
592
Likes
101
Rating
5
P
Printablesobri

120mm Fan duct 90 degrees two flanges

A 120mm fan duct for 90 degrees mount. I use it for my Alveo3D filtration system, but it should fit to any standard 120mm fan. The pipe has 0.8mm wall, which is not super sturdy, but works well and saves filament. See the dimensions if it…

Downloads
552
Likes
64
Rating
0
P
Printablesthall72
Downloads
510
Likes
55
Rating
4.5
P
Printableshumebeam

Overhang Test in Four Directions - 65 to 75 degrees

Update July 28th, 2020: Added a smaller version scaled at 75% for a quicker print time and to save filament, it's less than 5 grams. It's big enough to determine cooling quality but the normal version is a little easier to see the…

Downloads
476
Likes
29
Rating
4.71
P
PrintablesProject34

Elegoo saturn 4 ultra 16K bed drip 90 degrees

Elegoo saturn 4 ultra 16K bed drip 90 degrees , this allows for maximum resin draining from the bed and complete closure of the lid. Category: 3D Printer Accessories

Downloads
453
Likes
33
Rating
0
P
PrintablesJanne

Brio 180 Degrees Turning

Brio 180 Degrees Turning Category: Mechanical Toys

Downloads
419
Likes
57
Rating
5
P
Printablesctheroux

20 mm wide 90 Degrees T-Slot Angle Brackets

20 x 20 x 20 mm, 20 x 40 x 40 mm and 20 x 60 x 60 mm 90 degrees T-Slot brackets. 135 degrees version of them can be found at https://www.prusaprinters.org/prints/43057-20-mm-wide-135-degrees-t-slot-angle-brackets

Downloads
417
Likes
39
Rating
4.5
P
PrintablesBootjevaarder

Eufy 2K (Wired) Doorbell Wedge 35-55 Degrees

With this 45 degrees doorbell wedge you will be able to adjust the viewing angle of your Eufy doorbell camera. By adding the 5 or 10 degrees wedges you can extend the camera angle. You will need 2 extra small selftapping screws to attach…

Downloads
336
Likes
25
Rating
5
P
Printableslukefpv

20+25 Degrees Kayoumini Mount for Flywoo DJI O4 Lite Wide-Angle Lens

Updated version now allows easy ND-Filter switch and adds support for 12mm and 15mm Standoffs.

Downloads
334
Likes
25
Rating
5
P
Printablespoelstra

Hikvision DS-KV6113 doorbell bracket (45 degrees)

Bracket for mounting Hikvision doorbell camera with 45 degree angle, intended to be mounted in a corner. Can be mounted left or right. Print settings: 0.2mm layers, 20% infill. I printed in silver PLA to (roughly) match the camera's…

Downloads
326
Likes
18
Rating
0
P
PrintablesJanne

Brio Bridge Ramp, 90 Degrees Corner

Brio 90 degrees bridge ramp Category: Mechanical Toys

Downloads
313
Likes
48
Rating
5
P
PrintablesSomePrintrNoob

80mm Fan Mount (90 Degrees)

I couldn't easily find a mount like this on thingiverse. This was created to screw into my SmartRapCore's wooden frame for ramps cooling. Just use regular pc fan screws for the fan, and then screw the fan into wherever you need it to be.…

Downloads
311
Likes
25
Rating
5
P
Printablesthall72

Lego Compatible (5405.dat) Technic Gear 4 Knob 44 degrees

This model is compatible with the lego system.

Downloads
306
Likes
32
Rating
0

Magnetic Saw Guide 90 degrees

Magnetic Saw Guide. Add 3x10mm magnets mid print. Pause the print at layer 18, add magnets, and then resume the print.

Downloads
304
Likes
64
Rating
0
P
PrintablesWS7 Prints
Downloads
296
Likes
14
Rating
0
P
PrintablesIonNight

Lego Helical Gears 45 degrees 20t + 12t

Imported from my designs on Thingiverse. Original upload was 31.10.2018 (dd.mm.yyyy) Consider to follow if you like what I do. Helical gears for Lego. These are 45 degress. Resin printers are better than FDM to make the gears smooth. FDM…

Downloads
293
Likes
51
Rating
0
P
PrintablesOTL3Dprints

three degrees Square and compasses

If your a Mason you understand, if your not then you wont so Ill leave it at that. SMIB https://www.patreon.com/OTL3DPrinting/redeem/1A42E First 10 people to sign up will receive their first month free on the support tier on my Patreon…

Downloads
291
Likes
25
Rating
5
P
PrintablesGiuliano

Prusa Mk3 Nozzle fan 45 degrees MODIFIED part

The same part as original but with more thickness at the hole section so it doesn't break easily. Print instructions ABS Infill: 20% and 100% in the top section

Downloads
284
Likes
5
Rating
5
P
PrintablesSmokingHandbag

Saturn 4 ultra 16k vent adapter - 100mm / 45 degrees

A follow on of the 75mm vent adapter. I needed a 45 degree vent adapter to vent out of the back of the printer but not get in the way of the lid when opened as it takes quite a bit of space behind the printer to do so. I designed this to…

Downloads
283
Likes
17
Rating
0
P
PrintablesRobertG888

Honeycomb wall adapter 35 degrees

In case your like me and mounted it the wrong way around

Downloads
283
Likes
58
Rating
5
P
Printablesthe_buff

Angle Stage +-10 degrees

This is a small (80x80x25) angle stage that tilts 10 degrees from center in either direction. It is sized to match the other stages I have uploaded separately. It requires 2.8 turns of the screw to move the stage 1 degree. This is similar…

Downloads
274
Likes
43
Rating
0
P
PrintablesFox Craft

Japanese saw jig 90 and 45 Degrees

Fully printable small 45 - 90 Degree cutting jig for Japanese saw and jig saw. You can fit up to 50mm wide and 30mm high piece of wood. I recommend to print the jig at 0.2mm layer height, 4-5 perimeters with 20% rectilinear infill.

Downloads
248
Likes
35
Rating
5
P
PrintablesNitrEX4

X-Shot Longshot FAMAS Carrying Handle with 2 degrees Picatinny

Update April 2024 - I suggest printing the carry handle in two parts, dovetailing it at the picatinny rail. This allows you to print it side down, costing less support material and also getting a more optimal print orientation for…

Downloads
247
Likes
43
Rating
0
P
Printablescoolcow

Screw tolerance test - 45 degrees - 0.20/0.25/0.30/0.35 mm

Just a little thing to test out which tolerance i have to choose when i make models with screw threads... Category: 3D Printing Tests

Downloads
242
Likes
24
Rating
5
P
PrintablesIonNight

Helical Gears 45 degrees 36t + 12t, Lego compatible

Imported from my designs on Thingiverse. Original upload was 03.11.2019 (dd.mm.yyyy) Helical gears. These are 45 degrees. Resin printers are better than FDM to make the gears smooth. FDM will work but you have to do the instruction below…

Downloads
238
Likes
36
Rating
0
P
PrintablesKubiczek

Mobius Kaleidocycle box (kinetic ring box) M2.5 screw version (original file by Puhsketti) designed by @degreesoffreedomco

Only for those without M2 screws no other reason to print this instead of original. THE FIRST FILE HERE: https://www.prusaprinters.org/cs/prints/13780-mobius-kaleidocycle-box-kinetic-ring-box…

Downloads
237
Likes
38
Rating
5
P
PrintablesMike

LED Strip Mount for 2020 T-slot Extrusion - 30 degrees - 10mm width

Simple model to mount a 10mm wide LED light strip to 2020 t-slot extrusion at a 30 degree angle. Mounted using (2) M3x6 button head bolts and (2) M3 t-nuts. The strip should slide through the channel, which keeps it in place without the…

Downloads
226
Likes
49
Rating
5
P
PrintablesMrDeepAddicted

Polar Fine Adjustment Unit - Below 45 degrees

[Update 3 JULY2025] CenterUnit_v2.stl LowerAzimuthPlate_v2.stl //Modified clearance for bearing UpperAzimuthPlate_v2.stl //Modified clearance for bearing and change M4 to M5 for adjustment parts. I have made a type of Polar Fine…

Downloads
215
Likes
32
Rating
0
P
PrintablesTholi

dwarf-cover-connector for Prusa XL Dwarf Cover by @Spengilang_312039 bent open by 20 degrees

no supports needed To fit the cables in, push back the wrap as long as the connector-cover. Start on the “plug end” by sorting the wires side by side und push them into the gab carefully. The wrap of the cable can be pushed into the…

Downloads
203
Likes
25
Rating
4.4
P
Printableslolikong poi

45 degrees side scout mount M-LOK

Remixe from side scout mount for MLOK rails. Tested on Surefire M600 (chinese copy >_<) and my airsoft. May suit for firearm. V2.1 is 1mm highter thus V2.0 may not fit every handguard Print Settings Printer Brand: Ultimaker Printer:…

Downloads
199
Likes
30
Rating
0
P
PrintablesMetaMarkTea

Lego Wreath Jig 45 degrees

This clip connects onto the back of the Lego Wreath Branch when using it in a 45 degree angle (6 branches) configuration.

Downloads
198
Likes
34
Rating
0
P
PrintablesDave_The_Knave

Logitech M575 Stand 20 degrees - CAD file included

I have included the inventor file that I used to make this with so feel free to change the angle to your hearts content. Update: Printed and checked the fit, still a little tight, just needed to debur a little on the square locking…

Downloads
194
Likes
17
Rating
4.4
P
PrintablesThomas Fischer

Anycubic Vyper spool holder - 30 degrees turned

Thanx to Bush for the Vyper spool holder . Here the basis is turned 30 degrees, so the filament is more directly aligned to the filament sensor. Together with holder_2___30_degrees you have to use holder_1_long , together with…

Downloads
193
Likes
25
Rating
5
P
Printablesmidev

Airconditioning 90 degrees duct

I needed a 90 degrees duct to connect my air conditioning duct (150mm) to my ventilation system (125mm), without the use of excessive amounts of duct tape It fits on a mks3s+ build plate, well it kind of fits. :D I suggest you split it up…

Downloads
190
Likes
16
Rating
0
P
PrintablesChris Thijssen

Hdzero Tiny whoop canopy for Lux and Eco (45 and 40 degrees)

Previous canopy's all smashed the cam into the AIO. Was seeing the briBrain for the analog build so modded them for hdzero. And made a version that fits the lux cam.

Downloads
189
Likes
11
Rating
0
P
PrintablesPb023_3D

90 degrees keychain Go pro adapter

FIND IT IN CULTS 3D ;) https://cults3d.com/es/modelo-3d/artilugios/gopro-90-degrees-keychain-adapter One M5 nut is needed. It fits without glue or hot, use the screew to tighten it.

Downloads
188
Likes
29
Rating
5
P
PrintablesDonny$

Speaker Wedge 10 & 15 Degrees

HOW TO PRINT: Layer Height: 0.2 mm Supports: No Infill: 10% Print on the side for even textures on the top and bottom.

Downloads
186
Likes
8
Rating
0
P
PrintablesLulu

KAPLA connector 90 degrees

Easy to print KAPLA connector. No supports needed. Happy printing!

Downloads
186
Likes
22
Rating
4.25
P
Printablesctheroux

20 mm wide 135 Degrees T-Slot Angle Brackets

20 x 20 x 20 mm, 20 x 40 x 40 mm and 20 x 60 x 60 mm 135 degrees T-Slot brackets. For 90 degrees versions of these brackets, see https://www.prusaprinters.org/prints/43117-20-mm-wide-90-degrees-t-slot-angle-brackets Support is not needed…

Downloads
171
Likes
11
Rating
0
P
PrintablesMaikeru

Elbow Pipe (90 Degrees) - OpenSCAD

I've needed Elbow pipe for a hose that is suppose to end in the drain. The attached STL is the one I needed 11mm goes into the hose and 15mm goes into the drain. It's very simple to modify the sizes with OpenSCAD parameters (I've tried to…

Downloads
169
Likes
5
Rating
0
P
Printablesthall72
Downloads
169
Likes
21
Rating
0
P
PrintablesTxGnRnr

Unifi Protect G4 Instant Camera Mount 22.5 Degrees Rotated

I needed to mount a new Unifi Protect G4 Instant Camera on a wall, but I need the camera turned to view sideways along the wall. I found a suitable wall mount on Thingiverse by darklis: https://www.thingiverse.com/thing:5393420…

Downloads
167
Likes
17
Rating
0
P
Printablesmindparadox

Template to help align monitors at 45/60 degrees to each other.

Seemed mad to be using a protractor to align my triple monitors with a 3D printer available! Created a simple template to help align the three monitors on my sim racing rig to 45 degrees or 60 degrees. Should work with any size of monitor…

Downloads
163
Likes
17
Rating
0
P
PrintablesGijsdesign

eufy 2k 30 degrees wedge

helps you see your surroundings more 30 degrees instead of 15 degrees

Downloads
160
Likes
15
Rating
0
P
PrintablesKaizen Minis

Miter Guide or Cutting Angle Jig for Foam Boards, Foam Core or Sintra Board 90/45/30 Degrees

A Cutting Jig for Foam boards 5mm Boards to make angle cuts NO SUPORTS NEEDED FITS FOr 5mm Boards

Downloads
156
Likes
15
Rating
0
P
PrintablesChristoph

Pool nozzle 90 degrees Intex / Bestway

Die Düse lenkt das Wasser am Poolrand lang zum Skimmer. So wird verhindert das sich 2 Strudel bilden von denen einer nie den Skimmer erreicht. So wird die gesamte Wasseroberfläche von Schmutz befreit. Da es immer wieder zu Problemen mit…

Downloads
155
Likes
10
Rating
0
P
PrintablesAlenba90

DIN rail test rack ( bottom rail 20 degrees )

I added a 20 degrees angle to bottom rail

Downloads
153
Likes
22
Rating
5
P
PrintablesMarcin Kargula

Cable chain 35mm x19mm move 30' degrees with lockers

I made model i need for one of my machine. It's cmpatible with original one. Chain is moving 30 degrees between separate link of chain. #Edit 2 new models inside - fixed end + start och chain Enjoy :)

Downloads
153
Likes
33
Rating
0
P
PrintablesAzaB2C

2020 Panel Corner Hinge, rotates 90 degrees (Voron based)

⚠Demo/Details: 37hr Printer build in 60 seconds… ⚠🤯 Made 2020 hinges that can also hold/protect 1/8" (3mm) panels attached to both the top lid panel, and bottom back panel of my V1 Engineering MP3DP v4 ( https://docs.v1e.com/mp3dp ).…

Downloads
152
Likes
43
Rating
0
P
PrintablesGP

FlySky Reciever 90 degrees antennas holder

Fix your antennas at 90 degrees angle to maximize signal quality and range Parts prints orientation is optimised for print quality, then just use a drop of CA glue to attach the parts and two zip-ties to make sure the antennas never go…

Downloads
148
Likes
10
Rating
0
P
PrintablesEgonHeuson

90 degrees heatbed cable cover for the MK3

Hello friends! Here is my version of the 90 degree heatbed cable cover for the original Prusa i3 MK3. I recently received it (and its wonderful), and I put it inside my IKEA Lack case (I previously made thanks to Prusa who published a…

Downloads
147
Likes
18
Rating
4.67
P
Printablesdiehenne

Towel Hook with 70 degrees Overhang (no support) - for ikea kitchen door

I designed this towel hook to test the ability of my new MK4s with overhangs. The overhang has 70 degrees and works perfectly! There is a single towel hook file, which can be combined in prusa slicer to an arbitrary number of connected…

Downloads
147
Likes
17
Rating
5
P
PrintablesIonNight

Helical Gear, 45 degrees, 16t, Lego compatible

Imported from Thingiverse. Original upload was 04.11.2018 (dd.mm.yyyy) Consider to follow if you like what I do. Helical gear for Lego. These are 45 degrees. You have to make 2 of the same gear to make it work. No mirroring needed. Resin…

Downloads
145
Likes
24
Rating
0
P
PrintablesSmokingHandbag

Saturn 4 ultra 16k vent adapter - 75mm / 45 degrees

I needed a 45 degree vent adapter to vent out of the back of the printer but not get in the way of the lid when opened as it takes quite a bit of space behind the printer to do so. I designed this to have a good insert fit into the…

Downloads
143
Likes
13
Rating
0
P
Printablesfalken_gt4

M733 CAR15 Handguard Picatinny Rail - 45 degrees

45 degree Picatinny Rail for the Colt M733/CAR15 longer carbine handguards (different from M4/M933). These fit in place with the ribbing on the handguard and fix through the front 3 holes with use of M5 Nuts and M5 x 8mm Flanged Bolts.…

Downloads
143
Likes
15
Rating
5
P
Printablesfirstgizmo

150mm Hose 90 degrees

Just print in the given orientation No support needed, but depending on your parameters you might add some support on the outer piece though.

Downloads
139
Likes
20
Rating
0
P
PrintablesMikko Halava

MonoMount Betafpv Air75 30 degrees

“Made for the Tiny Whoop Pinch Camera, and Diamond Style Flight Controllers. You will have to cut 75% of the front post on the BetaFpv Air75 Frame and shave a little plastic off of the bottom of the frame under the front post.” Copied…

Downloads
135
Likes
28
Rating
0
P
Printableskuldar

New version: 3x8" diamond stone sharpening guide 17 degrees

I created this model to provide myself 17 degrees angle when sharpening knives on diamond plate. My previous model allowed to keep knife under 90 degrees on diamond stone, but this sharpening guide keeps the knife under 17 degrees while…

Downloads
132
Likes
10
Rating
0
P
Printablesbutchja

Solar Panel Flat Roof Mounting System 15 degrees

Introduction I was looking for a inexpensive way to mount my solar modules on a flat roof. I came up with a solution utilizing cheap lawn curbs aluminum extrusions and 3D printed holders. The lawn curbs weight down the modules and give…

Downloads
123
Likes
39
Rating
5
P
Printablesdesign_28

10 Degrees Perfect Logitech Keyboard Stand

The 10 Degrees Perfect Logitech Keyboard Stand is a sturdy, minimalist keyboard stand designed around the Logitech MX Mechanical. The stand raises the keyboard into a comfortable 10° typing position while keeping it securely supported.…

Downloads
119
Likes
40
Rating
5
P
PrintablesLastZion

45 Degrees LED bar clip mount for 2020 extrusion

I bought this LED bar -→ https://www.aliexpress.com/item/1005005787406587.html?spm=a2g0o.order_list.order_list_main.83.557018021ViiJB. This LED bar can actually go straight into the cavity of the 2020 extrusion, but that would make it…

Downloads
119
Likes
17
Rating
0
P
PrintablesFPV.Davis

Plant Bender - 90, 60 and 45 degrees for low stress training

Easy to use, easy to print plant benders for low stress training of your plants. optimised for 8mm twigs. Use TPU and about 10-20% infill. No supports are needed.

Downloads
116
Likes
13
Rating
0
P
PrintablesTonyst

Support test - by degrees

Support test - by degrees

Downloads
115
Likes
10
Rating
0
P
PrintablesDraga

Elecom EX-G raiser 40 degrees

Printed with 4 top/bottom layers, and 10% infill. The version with brush has the space to store a little brush that I've got from an hair clipper, and use the edge and brush of to clean the sensor area. Add a few rubber feet at the bottom…

Downloads
115
Likes
6
Rating
5
P
Printables3D Print Fun

Bambu Lab P1P Purge Box with 90 degrees inside corner

After adding the enclosure to my P1P the other purge box no longer fitted on the corner, so I designed a new one. This one has some Polygon holes added to it on one site, so you easily can see when it's full. I printed in PETG, but PLA…

Downloads
113
Likes
6
Rating
0
P
PrintablesSph3raLab

Apex XT60 30 degrees side mount

I have designed and 3D printed an XT60 connector mount specifically intended to facilitate the connection of LiPo batteries to your drone. This mount is designed following the Apex frame style but, by attaching to the common standoffs of…

Downloads
111
Likes
4
Rating
0
P
PrintablesCameron

Drybox 5 Spool Adapter Remix 15 Degrees

Adjusted the angle of the PTFE connectors so it's now angled by 15 degrees to reduce friction in the setup. Otherwise identical to the original.

Downloads
107
Likes
28
Rating
5