Search results: dn50

Sort order

86 models

P
PrintablesDerWildeOtter

Blast Gate Dust Collection / Sperrschieber Absaugung DN50 (2")

Dies ist ein Sperrschieber für die Absauganlage für Rohre in der Größe DN50 (2") Er ist leicht zu montieren mit nur 4 Schrauben und Muttern der Größe M5 . Die Schrauben müssen mindestens 15mm (0.6") lang sein! Er lässt sich mit dem Winkel…

Downloads
143
Likes
15
Rating
0
P
Printablesjvazac

Drilling parts for swimming pool pipe fittings DN50 (2")

2"/D50 pipe fitting for probe/sensor/injector holding onto pipe. It has been made with two typical pipe-threads - G1/2 and G3/4. You can look into my other models, where you can find temperature probe sensor shaft for this fitting or…

Downloads
83
Likes
24
Rating
0
P
PrintablesAgar

osVAC Adapter M32-DN50

Passend zum osVAC System hier ein (Geräte-) Adapter M32 auf DN50 (z.B. HT-Rohr) mit 50mm. Ich verwende diesen Adapter um schnell und einfach einen (zusätzlichen) Zyklon in meiner Absaugung zu installieren. Hierzu habe ich den DN50…

Downloads
804
Likes
41
Rating
5
P
PrintablesBede

Strong DN50 50mm Pipe Clamp

Pipe clamp to fit an 50mm OD Tube, Snaps onto the pipe after skrewing it on the wall. Can be used with bolts up to 5mm thickness. A small M5 washer is intendet to be used to reduce the contact pressure of the bolt onto the plastic.…

Downloads
566
Likes
53
Rating
5
P
PrintablesTimur Kasumov

50mm DN50 D50 pipe cap/stub/stop

50mm DN50 D50 pipe cap/stub/stop Заглушка канализационной трубы 50mm

Downloads
545
Likes
21
Rating
5
P
PrintablesJR

Stopfen DN50 HT Rohr

Stopfen um HT Rohr (50mm) als Köcher zu nutzen

Downloads
475
Likes
19
Rating
5
P
Printablesgubergren

IBC S60x6 DN50

IBC S60x6 DN50 Adapter Searched for this specific adapter model, but couldn't find any, so made one myself. Enjoy! Category: Parts

Downloads
454
Likes
29
Rating
5
P
Printablesswablab e.V.

osVAC neo M32 to DN50

Because the model of @Agar_146696 ( https://www.printables.com/de/model/68604-osvac-adapter-m32-dn50 ) was not long enough, I've designed this new version. Edit: After we've made aware by @Charly_Brown_539474 that the outer diameter was…

Downloads
426
Likes
39
Rating
4
P
PrintablesSchlupp

DN50 Rohrschelle / Pipe clamp

Rohrschelle für DN50 Rohre für Wandmontage mit 4,5 mm Senkkopfschrauben. Der Abstand zwischen Wand und Rohr beträgt 25mm. Falls sich die Mutter nicht in die Aussparung stecken lässt, erhitze die Mutter mit einem Fuerzeug oder Lötkolben.…

Downloads
286
Likes
37
Rating
0
P
PrintablesR0285

Hydroponic Pot / Net Cup / HT Rohr Pipe DN50

Pot to fit a HT DN50 Pipe Junction

Downloads
281
Likes
21
Rating
5
P
Printablesdrei-d-w

osVAC DN50 pipe adapter

osVAC DN50 pipe adapter

Downloads
279
Likes
27
Rating
5
P
PrintablesAgar

Vacuum Valve (Unterdruckventil) 50mm (DN50) +more (DN75/DN40)

If you are looking for a vacuum valve to be installed directly in your 50mm (DN50) pipe installation you might find this thing very helpful. As an example if you use one of those cyclone dust separaters and fear that your holding tank…

Downloads
250
Likes
27
Rating
5
P
Printablespoke0s

Blastgate DN50, osVac neo M32, multiple versions

Hi, I could not find the right version(s) for a kinda small footprint blast gate, so I modeled my own. You can mix and match the parts the way it fits your needs. You'll always need: 2 spacers 1 slide 2 baseplates Furthermore you need 6…

Downloads
225
Likes
37
Rating
5
P
PrintablesPatrick

HT Muffenstopfen DN50

Muffenstopfen DN110 nach Norm Zur Abdeckung von Rohren

Downloads
218
Likes
9
Rating
5
P
Printableshdo261

Tischbein Adapter für Camper Van (PVC HT DN50, Knaus Boxstar) [german]

Das sind Adapter um aus einem HT-Rohr (DN50) ein Tischbein zu bauen, um den verbauten Tisch in der Dinette unseres Camper abzustützen. Das Maß ist passend für unseren Knaus Boxstar XL 600 Lifetime konstruiert. Sollte aber auch auf anderen…

Downloads
191
Likes
24
Rating
0
P
PrintablesMaMo89

Deckel für Abwasserrohr DN40, DN50, DN75

Der Deckel passt auf HT/KG Rohre der Größe DN40, DN50, DN75

Downloads
173
Likes
11
Rating
5
P
PrintablesChrosta

IBC Container DN50 wall grommet

This model is designed to securely connect pipes through barrel walls or IBC containers. The model consists of two parts - the grommet and the nut. The grommet is designed for easy pipe installation, while the nut ensures a tight seal…

Downloads
170
Likes
22
Rating
4
P
PrintablesLuMaHa

Endstopfen HT-Rohr DN50

Endstopfen für die Nicht-Muffenseite eines 50er HT-Rohres. Ist zur Aufnahme der Standard-Dichtung vorgesehen. Wurde bis jetzt noch nicht druckgeprüft. Endcap for DN 50 HT-pipe, straight-side end. Takes standard seal. Wasn't pressuretested…

Downloads
167
Likes
7
Rating
0
P
Printablesjanko777

Parametric Pipe Plug for Sewer Pipes (DN32, DN40, DN50, DN75, DN90, DN110)

This is a parametric pipe plug designed for sewer / drainage pipes with rubber seals (HT / KG systems). The model is generated using OpenSCAD and supports pipe sizes from DN32 to DN110 . For convenience, I have also included pre-generated…

Downloads
159
Likes
8
Rating
5
P
PrintablesVolker-Volkach

DN50 - HT50 VERSCHLUSS KAPPE MUFFE END / CAP CLOSURE SEALING CAP PIPE TUBE

German: Verschlusskappe zu DN50 Rohren, Verschluss bzw. Endkappe. Einmal mit Schrift "HT50" einmal ohne.. geeignet zum Verschluss von Rohren, als Endstück. Abmessungen: Passend zu DN 50 Rohren, Materialstärke 2mm Andere Dimensionen in…

Downloads
155
Likes
15
Rating
5
P
PrintablesAmazing Wood

CAMLOCK - HT Rohr DN50 Adapter

Adapter von CAMLOCK zum Standard DN50 HT-Rohr für zentrale Absaugungen in der Werkstatt.

Downloads
144
Likes
11
Rating
0
P
PrintablesHadema

Vacuumdapter DN50/DN40 to hose inside 38mm

Saugerdapter DN50/DN40 zu Staubsaugerschlauch innen 38mm Das Gewinde sitzt sehr fest und dichtet sauber ab Vacuum cleaner adapter DN50/DN40 for vacuum cleaner hose inside 38mm The thread is very tight and seals cleanly

Downloads
130
Likes
9
Rating
0
P
PrintablesWoodenti

bajonett adapter from DN50 to Einhell vacuum hose

printed as full solid. small supportstructures for the protruding pin.

Downloads
128
Likes
27
Rating
0
P
PrintablesDIY_bastelei

Wallmount 50 mm Pipe Wandhalter DN50 Rohr

A simple clamp connection to attach a 50 mm diameter HT pipe to the wall. The pipe sits close to the wall. However, the bead for the rubber ring of a butt joint has enough clearence. It is mounted using a Spax screw and clamped using an…

Downloads
114
Likes
9
Rating
0

Blastgate DN50 mit Dichtung für Kugel

Die Kugel dichtet in der Schale 1 mit einem O-Ring ab. Bei anderen Blast Gates in diesem Design hatte ich das Problem dass Sie nie ganz abgedichtet haben und immer ein wenig Falschluft gezogen wurde. Passender O-Ring:…

Downloads
114
Likes
20
Rating
4
P
PrintablesPepe

DN50 to 24mm hose adapter

This was made for a garden water dripping system. I printed it with PLA without infill, but with 3 perimeters using a 0.4mm nozzle, this way it was basically 100% infill / solid. Male to male adapter was ok to print without supports.…

Downloads
110
Likes
8
Rating
0
P
Printablespoke0s

Scheppach DC100 (Parkside) to HT DN50

Adapter to connect a HT Pipe DN 50 to Scheppach DC 100 (Parkside PASA 1200) or similar. Prints without support.

Downloads
100
Likes
7
Rating
0
P
PrintablesFlo

HT DN50 Muffentopfen (Deckel/Verschluss) Rohrverschluss

Zum Verschließen von 50 mm HT Rohren.

Downloads
96
Likes
11
Rating
5
P
PrintablesKSchloe

Festool D27 Hose & CTM MIDI to DN50/HT50 adapter

Two Adapters to connect the Festool D27 standard hose to a 50mm pipe system. Included files: D27 Hose to DN50/HT50 DN50/HT50 to CTM Midi Flansch / D27 Flansch Category: Hobby

Downloads
93
Likes
9
Rating
0
P
PrintablesSchlupp

DN50 auf NW53 Dachrinnen Adapter / DN50 to NW53 gutter adapter

Dieser Adapter macht es möglich standard DN50 Rohre mit Dachrinnen der Nennweite NW53 (z.B. von Marley) zu verbinden. ------------------------------------------------------------------------------------------------------------ This…

Downloads
92
Likes
9
Rating
0
P
PrintablesSchlupp

Rain Diverter for NW53 / DN50 Pipes

This design is used to collect rainwater from a gutter. The input side is compatible to the NW35 gutter pipe size. At the output (overflow) you can connect the DN50 pipe. The rainwater will be forwarded through a ¾" hose compatible…

Downloads
86
Likes
12
Rating
0
P
Printablesleprehd

osVACneo F32 to DN50 with gasket

This adapter slides into a DN50 cup and allows connections of M32 osvac using a TPU gasket to reduce air leak

Downloads
85
Likes
10
Rating
0
P
PrintablesChristoph

Rohrschelle / pipe clamp DN50

Da mir die Rohrschellen für 50 mm Rohre aus Metall nicht zusagen, habe ich mich von einer PG-Rohrschelle inspirieren lassen und diese für Rohre DN 50 vergrößert und so modifiziert das sie ohne Stützmaterial druckbar ist. Since I don't…

Downloads
82
Likes
4
Rating
0
P
PrintablesKinetik

50 mm Alto Nilfisk Wap tube / hose to DN50 tube /pipe

I needed an adapter to connect my vacuum system to a 50 mm ID flexible vacuum tube. This hose adapter (50 mm ID) is able to connect to a DN 50 mm OD pipe directly. Print Settings Printer Brand: Anycubic Printer: All-metal Mega Rafts: No…

Downloads
80
Likes
4
Rating
0
P
PrintablesAllahopp

DN50 / Throttle Valve Type Non-Clog Blast Gate for Workshop Dust Extraction

It is made for the common DN 50 Tube System. You need a seal for the side where the tube comes in.

Downloads
77
Likes
20
Rating
0
P
Printablesjocin

Adapter for festool vacuum hose to HT DN50 bushing

Adapter to fit a festool vacuum hose to a HT DN50 pipe bushing. Filament: extrudr greentec pro (PETG should also be fine) Print settings: layer height: 0.2 wall loops: 3 Top/bottom layers: 5 infill: 25% rectilinear support: no

Downloads
74
Likes
6
Rating
0
P
Printablesjocin

Wall mount for HT DN50 pipe

I designed this wall mount for a HT DN50 pipe to have enough space to the wall to fit a 100 mm Blast-Gate. The mount goes on the bushing side of the pipe. If you want to mount on the pipe diameter i also uploaded a thicker…

Downloads
72
Likes
13
Rating
0
P
PrintablesWoodenti

Adapter for Einhell TC TV 1930 S to DN50

supportstructures required.

Downloads
66
Likes
15
Rating
0
P
PrintablesMatze

Adapter DN50 auf DeWalt Airlock

Adapter, um eine DeWalt Airlock Kupplung an ein DN50 HT Rohr anzuschließen. Für mehr Stabilität in ABS mit 6 wall loops, 6 top und bottom layers und 50% rectilinear infill.

Downloads
63
Likes
7
Rating
0
P
PrintablesKSchloe

DN100/HT100 to DN50/HT50 adapter

DN100/HT100 to DN50/HT50 adapter. Included a small spacer, if your DN100 port is not exactly 100mm. EDIT 16.02.2021 Reuploaded the files with better .stl's (more vertices). Now it's really a round thing! Category: Hobby

Downloads
61
Likes
11
Rating
0
P
PrintablesSam

DN50 Adapter for DN60 Rainwater Pipe

This is an adapter to connect a DN60 rainwater pipe to a DN50 HT pipe. I did not find such a product in the stores, so I decided to design one. There is 3 models available: dn60-dn50-symmetric.stl Standard adapter (centric and symmetric)…

Downloads
60
Likes
5
Rating
0
P
PrintablesMLS

Adapter HT-Rohr DN50 auf R 1¼" - Adapter HT pipe DN50 to R 1¼"

Ich benötigte für den direkten Anschluss eines Rückschlagventiles an ein HT Abwasserrohr DN50 einen Adapter, um das kurze Schlauchstück zu vermeiden. Das Gewinde des Rückschlagventils ist R 1¼". Unbedingt mit ASA drucken; ASA ist für…

Downloads
53
Likes
5
Rating
0
P
PrintablesTobiF

Klemme für HT-Rohre DN40 und DN50 (pipe clamp)

deutsch: Die Klemme in DN40 ist getestet und funktioniert. Sie hält das Rohr und liegt exakt an. Die Klemme DN50 ist ungetestet, wurde aber mit den gleichen Toleranzen erstellt. Version 3: Ich musste feststellen, dass die Rohre nicht…

Downloads
42
Likes
5
Rating
5
P
PrintablesMarc Wilkens

DN50 Rohrbogen Zeichenhilfe

Wenn man mal den DN50 Rohrbogen nicht mit 90°verbauen kann, sondern einen anderen Winkel benutzen muss, um die Leitung zu fertigen, muss man ja den neuen Winkel auf dem Rohrbogen anzeichnen um den Rohrbogen dann, entsprechend dem neuen…

Downloads
39
Likes
0
Rating
0
P
PrintablesLaféeléonie

dn100, dn50, dn40 construction tap / bouchon de chantier

Simple bouchon à poser sur des évacuations en PVC DN100 pour éviter les odeurs sur les chantiers. Simple plug for use with DN100 PVC drains to prevent odors on construction sites. [BuyMeACoffee]( https://buymeacoffee.com/lafeeleonie )

Downloads
38
Likes
3
Rating
0
P
PrintablesKSchloe

Scheppach OSM600 Hose Absaug Adapter DN50/HT50

For my Scheppach OSM600 I needed a special angled adapter to fit in the corner of my shop. Therefore I designed a hose adapter which fits on one side on the maschine and on the other to a standard DN50 / HT50 or 50mm Hose. Print without…

Downloads
38
Likes
3
Rating
0
P
PrintablesBenjamin

Endstück Kappe DN50 Abwasserrohr

Passt auf die grauen DN50 Rohre.

Downloads
35
Likes
3
Rating
0
P
PrintablesDvG3DAtelier

Staubsauger-Adapter für BOSCH GEX 18/12-125 auf HT DN50 - Vacuum Adapter - secure fit

Dieser Adapter verbindet die BOSCH GEX 18-125 oder GEX 12-125 Exzenterschleifer sicher mit einem HT-Rohr DN50. Einfach aufstecken, um 90° drehen, fertig. Ideal zur effizienten Staubabsaugung in der Werkstatt. This adapter securely…

Downloads
34
Likes
7
Rating
0
P
Printablesueda

MKIII Wind Turbine HT DN50 pipe adapter Kit

This is a adapter kit for the MKIII wind turbine by 3dprintable1 ( https://www.thingiverse.com/thing:2851306 ) designed for german HT DN50 pipes. The original kit makes use of standard UK drain pipes with an inner diameter of 64.50mm…

Downloads
34
Likes
5
Rating
0
P
PrintablesPunkti

60mm Fan to DN50 Pipe

This is a adapter for a 60mm fan to a dn50 pipe. There are 2 Versions. the first has one side for the pipe coupling and is meant fot a common DN50 Seal the secend version is without the coupling. both feature a simple nut slot for m4…

Downloads
33
Likes
8
Rating
0
P
PrintablesKSchloe

DN50/HT50 Cable Clip

Just a simple cable clip for ht50/dn50 (50mm) pipe. Works perfectly with cables less than 8mm diameter.

Downloads
30
Likes
9
Rating
0
P
PrintablesToms3DDruck

Filter for Pipe DN50 BSP 1 3/4 Inch

For BSP Thread 1 3/4 Inch. There is also a distance holder for floating objects.

Downloads
28
Likes
4
Rating
0
P
PrintablesTheOther

Basic DN50 to 22mm and 19mm Adapters

Printing takes about 2 hours on a beginner printer and uses about 20 grams of filament. You should be able to print it without any supports. Just in case you are missing a specific size or want some changes done to the model, dm me and I…

Downloads
28
Likes
3
Rating
0
P
PrintablesProfien

DN50 Adapter für Waschmaschine und Trockner / washing machine and the condenser dryer.

Best to print upright with support on the print bed. Printing Settings: • Quality: 0.2 mm (Standard Quality) • Infill: 100% / 60 % also ok • Material Recommendations: ABS or PETG

Downloads
27
Likes
0
Rating
0
P
PrintablesKSchloe

FlexibleHose to DN50 Adapter

A simple little Adapter for the flexible Hose from Marius Hornberger. Link: https://www.thingiverse.com/thing:3283786 Liked this design and the rigidness. Make sure to print it with inner supports due to the steep curve. Category: DIY

Downloads
27
Likes
4
Rating
0

Twist Connector for DN50 Hose

I am using DN50 hoses/pipes in my workshop to get dust from one point to another. After going through a number of systems, I designed this bayonet-style connector. The goal was to make something that I could easily connect and disconnect,…

Downloads
26
Likes
4
Rating
0
P
PrintablesKSchloe

HT50/DN50 Double Clamp/Adapter

Just a simple doubble adapter for two DN50/HT50 pipes. Fits perfectly to this blast gate: https://www.thingiverse.com/thing:4382243 Category: Hobby

Downloads
26
Likes
12
Rating
0
P
PrintablesMike H.

Adapter HT Rohr DN50 zu DN40 Siphon Rohr

Bei dem Objekt handelt es sich um einen Adapter von HT Rohr DN50 zu DN40 von einem Siphon Rohr. Der Übergang hat eine Wandstärke von 4 mm und ist daher sehr stabil. Mein Druck: PETG Support an der Nut für den Dichtring 100 % infill, damit…

Downloads
24
Likes
1
Rating
0
P
PrintablesNiWo90

Coolingfan duct for DN50 Pipes

Pipefitting to insert a 60mm Fan into a DN50 Pipe. You need to place 4 4*6*6mm or 4*4*6mm Knurled Nuts to secure the M4 Bolts you need a Scew that's about 15mm longer than the Thickness of the Fan (e.g.: 25mm FAN, 40mm Screw; 10mm Fan,…

Downloads
24
Likes
4
Rating
0
P
PrintablessupremeDK1

osVAC M32 DN50 Winkel mit Befestigungsplatte

Print with support Print Settings Printer Brand: Prusa Printer: i3 MK2S **Rafts:** No Supports: Yes **Resolution:** 0.3 Infill: 15% Category: Machine Tools

Downloads
23
Likes
2
Rating
0

Dust Collection Y-Switch (using DN50 Pipe)

This is a simple way to switch one DN50 dust collection hose between two - or the other way around. All you need are three pieces of DN50 plastic pipe to act as connectors for the hoses. In my workshop I have a dust collection on the…

Downloads
23
Likes
6
Rating
0
P
PrintablesDvG3DAtelier

Compact Blastgate DN50 with Microswitch 12v and Magnetic Lock - Sperrschieber

Introducing A compact blastgate designed for DN50 HT pipes. It integrates multiple features to optimize dust collection systems. The gate includes a dedicated mount for a 12V microswitch that can be triggered automatically when opening or…

Downloads
21
Likes
1
Rating
0
P
Printablesleprehd

DN50 pipe wall horizontal support

Print laying flat no need for support, use mouse ears as the pointy bits tend to lift off the bed.

Downloads
21
Likes
2
Rating
0
P
PrintablesDaTom

Samsung Waschmaschine und Trocker Ablaufadapter (HT DN50)

Ablaufadapter für eine Waschmaschine und Trockner von Samsung (HT DN50) V2: Mit Rand Drain adapter for a Samsung washing machine and dryer (HT DN50)

Downloads
21
Likes
2
Rating
0
P
Printablesmilspecmoehring

DN50 to 24mm coupling

DN50 coupling to accomodate 24mm hose. Pleas keep in mind that you have to use temperature resistant filament if you plan on running hot water through this coupling. It will only ever receive cold water in my case whis is why i used PETG.…

Downloads
20
Likes
3
Rating
0
P
PrintablesJoHe

Rolleneinsatz für DN50 Rohr

Ein Einsatz zum einschieben in ein DN50 Abwasserrohr zum Erstellen einer flachen Förderbandrolle. Zum durchstecken einer 8mm Gewindestande als Achse.

Downloads
20
Likes
2
Rating
0
P
Printablescamdotcam

Drain Grille shower floor waste DWV DN50

I made a floor waste grate for my bathroom/shower. I didn't want a large recessed panel for the grille, and as I polished the floor by hand there wasn't a good way to have a inset plate that was level with the surrounding floor. Photos…

Downloads
18
Likes
1
Rating
0
P
Printablesjan5366x

DN40 to DN50 adapter

Print: TPU 0,4 nozzle 0,20mm layer hight no support Note: Not water tight not temperature resistant Bosch Dry Adapter: https://www.printables.com/model/1413113-dn40-bosch-dry-hose-adapter-schlauchadapter

Downloads
15
Likes
0
Rating
0
P
PrintablesKleinz1971

Orbitalschweiß Zentrierhilfe DN50 für 2mm Einlegering

Hier meine Zentrierhilfe zum abheften 2er DN50 VA Rohre mit 2mm Einlegering

Downloads
15
Likes
3
Rating
0
P
PrintablesMadMaxx425

Sicherungsklammer für HT DN50 auf Schlauchstück

Sicherung für einen HT-Rohranschluss (DN50) mit angeschlossenem Schlauchstück, z. B. für Matschküchen oder Regenwasserspeicher. Verhindert das Herausrutschen des Schlauchs bei Druckbelastung (z. B. >0,4 bar durch Wassersäule in…

Downloads
14
Likes
1
Rating
0
P
PrintablesKSchloe

HT50 / DN50 Pipe Holder for flexibel hose

Simple Pipe Holder for a 50mm Pipe. Designed to fit the HT/DN50 Pipe Clamp you can find here: https://www.thingiverse.com/thing:4389245 Just use the same screws and nuts (M4). Works perfectly! Fusion Files included. Print Settings…

Downloads
14
Likes
2
Rating
0
P
PrintablesApfelsaftbaum

TPU DN50 End Cover with Cable Passthrough

a TPU plug for DN50 pipes that allow you to route up to three cables trough the pipe and still seal up the end. There is a version for both ends. Print with TPU using supports. I recommend printing with the spiky parts down, using…

Downloads
13
Likes
2
Rating
0
P
PrintablesTi Se

Camlock to DN50 fitting

To connect the Camlock system to my existing dust collection system with DN50 tubes, i modified the camlock joiner. Connector is sized down to 99,6% as it was too tight. If your printer is super accurate, maybe scale it up a tiny bit.

Downloads
10
Likes
1
Rating
0
P
PrintablesLibor Baraňák

Příruba DN50 PN16

Flange DN50 PN16

Downloads
10
Likes
1
Rating
0
P
Printablestempelgogo

70° DN50 / R50 Cyclone Elbow with osVAC neo M32 Connector

This 70° elbow was designed to connect a DN50 cyclone separator outlet to an osVAC neo M32 vacuum hose system. It is optimized for the commonly available Dust Commander-style cyclone separators and their compatible Chinese clones. Unlike…

Downloads
9
Likes
2
Rating
0
P
PrintablesSDC

Universal drain plug for rough installation DN50, DN40, DN32

Universal drain plug for rough installation It keeps the smell out. Fits DN50, DN40, DN32

Downloads
7
Likes
1
Rating
0
P
Printables

osVAC M32 DN50 Winkel mit Befestigungsplatte

Print with support Print Settings Printer Brand: Prusa Printer: i3 MK2S **Rafts:** No Supports: Yes **Resolution:** 0.3 Infill: 15% Category: Machine Tools

P
Printables

50mm DN50 D50 pipe cap/stub/stop

50mm DN50 D50 pipe cap/stub/stop Заглушка канализационной трубы 50mm

P
Printables

Universal drain plug for rough installation DN50, DN40, DN32

Universal drain plug for rough installation It keeps the smell out. Fits DN50, DN40, DN32

P
Printables

Adapter HT Rohr DN50 zu DN40 Siphon Rohr

Bei dem Objekt handelt es sich um einen Adapter von HT Rohr DN50 zu DN40 von einem Siphon Rohr. Der Übergang hat eine Wandstärke von 4 mm und ist daher sehr stabil. Mein Druck: PETG Support an der Nut für den Dichtring 100 % infill, damit…

P
Printables

Samsung Waschmaschine und Trocker Ablaufadapter (HT DN50)

Ablaufadapter für eine Waschmaschine und Trockner von Samsung (HT DN50) V2: Mit Rand Drain adapter for a Samsung washing machine and dryer (HT DN50)

P
Printables

Camlock to DN50 fitting

To connect the Camlock system to my existing dust collection system with DN50 tubes, i modified the camlock joiner. Connector is sized down to 99,6% as it was too tight. If your printer is super accurate, maybe scale it up a tiny bit.

P
Printables

Klemme für HT-Rohre DN40 und DN50 (pipe clamp)

deutsch: Die Klemme in DN40 ist getestet und funktioniert. Sie hält das Rohr und liegt exakt an. Die Klemme DN50 ist ungetestet, wurde aber mit den gleichen Toleranzen erstellt. Version 3: Ich musste feststellen, dass die Rohre nicht…

P
Printables

Rain Diverter for NW53 / DN50 Pipes

This design is used to collect rainwater from a gutter. The input side is compatible to the NW35 gutter pipe size. At the output (overflow) you can connect the DN50 pipe. The rainwater will be forwarded through a ¾" hose compatible…