2,042 models
Unfortunately, it is quite difficult for small children's hands to hold and lick delicious ice cream in summer. The melting ice cream drips, sticks and the sticks are very small and difficult to hold for long periods of time. With this…
Print approx. €4.21–€5.15 excl. taxPreliminary estimate for one variant
Source .blend file is included, if you want to make some modifications😉 The edge isn't raised around the hole because of all the different grips people use. Classic painting palette with slightly raised edge to stop paint from dripping…
Print approx. €3.80–€4.65 excl. taxPreliminary estimate for one variant
Bonsai Pot with Drip Tray, Drainage Mesh and Small Feet Looking for a modern, elegant bonsai pot? I was too — until I designed one myself! This set includes: A stylish bonsai pot with a drainage hole A matching drip tray to catch excess…
Print approx. €1.79–€2.19 excl. taxPreliminary estimate for one variant
Easy to print lightweight drip tray for the Pokémon Bulbasaur Planter. Catches the excess moisture and allows it to evaporate. Can easily be scaled up or down on the X and Y axis. Printable with all common nozzle sizes: .25 .4 .6 and .8…
Print approx. €0.65–€0.79 excl. taxPreliminary estimate for one variant
Good for vase mode and scaling too! Uses Fibonacci sequence to create the pattern. Enjoy!
Print approx. €0.55–€0.67 excl. taxPreliminary estimate for one variant
UPDATE: The "remix_drip_bracket_7.2" version (shown in blue) fits better and centers the build plate over the resin vat better. I will remove the earlier version to prevent any issue of downloading the wrong file (earlier version shown in…
Print approx. €4.84–€5.91 excl. taxPreliminary estimate for one variant
Works with both Prusa SL1 and SL1S Speed printer. The Prusa SL1/S Speed Drip Adapter holds the build platform at an angle to allow excess resin dripping of the platform and model. The fixture is rigid and frees up both hands to release…
Print approx. €1.39–€1.70 excl. taxPreliminary estimate for PETGSource material: PET
Gardena Micro-Drip Sprinkler heads This is a sprinkler head for garden irrigation system based on the Gardena Micro-Drip hose. Models There are 3 models, for 3 diffferent angles: Angle File 160° Gardena Micro-Drip Sprinkler 3.stl 100°…
Print approx. €0.42–€0.51 excl. taxPreliminary estimate for one variant
Perfect for 1kg resin bottles and large resin vats, since most funnels I used were not large enough to contain the initial onslaught of resin Vat holder fits most 1cm diameter laboratory ring stands, funnel fits 3" and 2" retort rings,…
Print approx. €6.00–€7.34 excl. taxPreliminary estimate for one variant
A drip pan designed for the in-door water/ice dispenser of some Whirlpool refrigerators. Certain models place the water dispenser so close to the front, it ends up dripping down the door. This tray catches those drips. A sleeve for a…
Print approx. €10.56–€12.90 excl. taxPreliminary estimate for one variant
9 Sided Drip Tray designed to match the 9 Sided Twisted Planter. If you're using the twisted planter for a plant that needs drainage holes, poke a few holes in the bottom of the planter and print this matching tray to go underneath. My…
Print approx. €1.33–€1.62 excl. taxPreliminary estimate for PETGSource material: PET
A minimalist holder for Oral-B electric toothbrush heads. Features a drip tray to prevent liquids from getting on your counter. Rounded edges make it easy to clean and provides a nice aesthetic appeal. Bar at the bottom of each slot…
Print approx. €2.27–€2.78 excl. taxPreliminary estimate for one variant
A 13mm distributor with 4 4.6 mm pipe connections Two O-Rings (10.6mm x 2.7mm ) for the 13mm connections are needed
Print approx. €1.07–€1.31 excl. taxPreliminary estimate for PETGSource material: PET
A 13mm distributor with 2 4.6 mm pipe connections Two O-Rings (10.6mm x 2.7mm ) for the 13mm connections are needed
Print approx. €0.69–€0.84 excl. taxPreliminary estimate for PETGSource material: PET
The “Pop” model of the Nespresso Vertuo coffee machine comes with a drip tray designed for Nespresso's own “Vertuo Gran Lungo” mugs. To use normal sized mugs you need to remove the drip tray, which is not ideal. I liked Matt Rayner's…
Print approx. €2.12–€2.59 excl. taxPreliminary estimate for one variant
A 13mm distributor with 2 4.6 mm pipe connections Two O-Rings (10.6mm x 2.7mm ) for the 13mm connections are needed
Print approx. €0.80–€0.97 excl. taxPreliminary estimate for PETGSource material: PET
Mit dieser Halterung befestigen wir unser Gardena Micro-Drip Bewässerungssystem an unseren Blumenkästen. Die Wandstärke der Kästen beträgt 4 mm und die Ausladung der Halterung 70 mm. Translation: DeepL We use this bracket to attach our…
Print approx. €6.44–€7.87 excl. taxPreliminary estimate for PETGSource material: PET
Print profile 0,20mm SPEED (Input Shaper) No glue needed, all snap connections, and I recommend printing in PLA for dimensional stability, however others have had success with PETG as well. As described by the original author
Print approx. €0.48–€0.59 excl. taxPreliminary estimate for one variant
A 3D-printed alternative to the original metal part, which always scratches quickly and looks unsightly. It simply replaces the original part and doesn't require any adjustment. I've uploaded two possible file versions for the color…
Print approx. €2.89–€3.54 excl. taxPreliminary estimate for PETGSource material: PET
Hello, Today I have for you a Stain dripping from the edge . It is suitable as a decoration for Halloween! It is like slime :-D. For proper functionality, you need to use a Printing Profile! I used PLA/PETG as the material. No need to use…
Print approx. €0.61–€0.75 excl. taxPreliminary estimate for one variant
I love the Kalita Wave 155 dripper for pour-over coffee, but I want to use commonly available basket filters, like these for instance. This little tool will re-shape a larger filter to fit correctly inside the dripper. Print directions |…
Print approx. €0.81–€0.99 excl. taxPreliminary estimate for PETGSource material: PET
Print approx. €0.79–€0.96 excl. taxPreliminary estimate for one variant
This stacked donut planter combines a modern and simple design with an easy-to-print, no-support-needed, hidden drip tray. Available in four tested sizes (9 cm, 11 cm, 13 cm, and 15 cm), it caters to a variety of plant needs. While the…
Print approx. €1.15–€1.41 excl. taxPreliminary estimate for one variant
No more wasted dish washing liquid! 👍💰 Print instructions: Material: PETG Layer: 0,15 mm Perimeters: 2 Infill: 25% Supports: No Brim: Optionally This model requires some special settings, more details in the attached 3MF file. Custom…
Print approx. €0.97–€1.18 excl. taxPreliminary estimate for PETGSource material: PET
When I started using my resin printers, the need for a drip tray was evident, so here it is. By using the modifiers feature in Prusa Slicer it couldn't be easier to model these items in CAD and then use those modifiers to put perimeters…
Print approx. €2.23–€2.72 excl. taxPreliminary estimate for one variant
Gcode contains filament exchange. Colored in edges lightly with Micron Pen to fake Occlusion
Print approx. €0.60–€0.73 excl. taxPreliminary estimate for one variant
Made myself toothbrush holder with dividers and removable drip tray. The drip tray does not snap on.
Print approx. €3.20–€3.92 excl. taxPreliminary estimate for PETGSource material: PET
I wanted a good drip hook for my Phenom Forge. There are a couple available… but they didn't work as well as I wanted… So I took it into my own hands. Enjoy! pictured is the v2… i failed to realized that it would have a smaller inside…
Print approx. €4.10–€5.01 excl. taxPreliminary estimate for one variant
If you have this grill. you'll probably need this soon -- the included driptray is pretty brittle and bakelite-like. The height is overtall by a few millimetres. This is solely a cosmetic issue. I'll revise it if/when I need to print…
Print approx. €6.60–€8.07 excl. taxPreliminary estimate for PETGSource material: PET
Hi, this is my first 3d model made in Tinkercad. This specific dew collector was made for the following rice cooker. Precision Meets Performance: Transform Your Kitchen with the Zojirushi Commercial Rice Cooker - Zojirushi Food & Culture…
Print approx. €2.59–€3.17 excl. taxPreliminary estimate for one variant
Simple no-support 3D printable stake designed to hold standard drip irrigation emitters in grow bags, raised beds, and container gardens. Features Fits ~16 mm drip emitters Snap-in open ring design Flat print orientation — no supports…
Print approx. €0.33–€0.40 excl. taxPreliminary estimate for one variant
I had a vision of a pop-art, digital, illustrative style drippy paint bucket and had to make it come to life! I designed this entirely in Fusion360 and printed on Prusa MK3S and MK3S+. All parts print and fit together well in PLA at .3mm…
(2.0) Update: New versions to counteract the “benchy hull line” If you're not sure what I mean by “benchy hull line”, read this article. I have rounded out the bottom interior of the planter to counteract the slight layer shift our…
It is a system that helps to keep the soil moist wherever it is needed in a flower bed, garden or flower pot. Tested with a 1.5-liter bottle of mineral water, it lasts up to 4 days, but all standard bottles are suitable, I recommend…
🚨 UPDATE: Check out the improved V2 here: BOM: Printed with ROSA3D High Speed PLA Gray Say goodbye to soggy, smelly sponges. This drip tray features a functional wave pattern on the bottom that lifts your sponge (or soap bar) slightly up,…
Do you like your Drippy Bucket but wish it had some compartments? This is it! It is held in by the “Drippy” component, prints with no supports, prints fast at .3mm layer height and gives the appearance that the interior of the Bucket is…
Simple bracket to hang the Elegoo Saturn 4 Ultra print plate to allow resin to drip off.
Update: I have uploaded a revised version of this model that decreases the angle on the curve on the bottom of the planter to improve print quality on the overhang. This revision also improves the tolerances on the tray so the planter…
This is a remix for ikea skadis. You can choose between the diffrent inlays to organice your pens or something else. I have an extensive skadis collection, you can find it here. All parts print and fit together well in PLA at 0.2 mm layer…
This Aztec Pattern Planter is the perfect size for any small to medium cacti, succulent, or other houseplant. The design includes a series of drainage holes, as well as an optional, custom-fitted drip tray. The default size of the planter…
Modern planter with drip tray which twist and locks into the bottom of the pot. The small pot has a 85mm opening and the large pot a 132mm opening . Support is needed in the locking channels on the bottom of the pot, the support is very…
From the original designer of Drippy Bucket and Drippy Pail comes… Drippy Drum! If you already have Drippy Bucket or Drippy Pail and wish they were less paint-y and more hazardous-waste-y, this is for you! Drippy Drum is the same basic…
🎯 Recommended Print Settings For Best Results Print this design with a standard 0.4mm nozzle at 0.24mm layer height for that sweet spot between speed and detail. We're keeping it lightweight with just 8-15% infill, which gives plenty of…
BOM: Printed with ROSA3D Starter PLA Black Say goodbye to soggy, smelly sponges. This upgraded drip tray features a functional wave pattern that lifts your sponge (or soap bar) up, allowing air to circulate underneath and water to flow…
Aspire Planter: The Aspire Planter is the perfect size for small to medium sized houseplants, succulents, or cacti. The planter features built-in drainage holes and a drip tray that is perfectly contoured to the bottom of the planter,…
Due the new printing platform design for the Elegoo Mars 5 Series clean the resin could be more difficult. This drip bracket could help to recover a big part of the non-used resin and reduce the time to clean the platform. Print with…
This free planter is part of the Juno Planter Collection, you can see the whole Juno collection below. The complete set is available on my patreon shop, printables store and exclusive patreon or printables memberships:…
2 pieces simple hexa-comb drip tray. I used PLA for both parts, but you can use PETG or ABS for better durability. Dimensions: 150 x 230 mm Ideal for V60-02 dripper and 600ml kettle ;)
Vaporesso XROS 3 Series Drip Tip This is a remix of a model made by CHAOSXSPIRIT that can be found here. I have changed the drip tips design by making it smaller so it prints faster, is more comfortable, and uses less filament. I have…
From the original designer of Drippy Bucket comes… Drippy Pail! If you already have Drippy Bucket and wish it was less round-y and more square-y, this is for you! Drippy Pail is the perfect companion to Drippy Bucket and is ready to help…
Two versions of the Drippy Display Shelfs. The pattern fits together so that they can be hung next to each other to make a longer shelf. Or be mixed up as I have done. Before hanging, I highly recommend printing this model so that the…
Update: v3 Release All three parts of the planter have been updated for this release. The main change is to the drainage pot. Now, the interior overhang is much less steep, enabling printing without supports ! The bottom interior surface…
Drip irrigation ring for containerized plants. Two sizes are provided - 100 mm and 120 mm. The Openscad file is also available for customization - you can vary the diameter of the ring, diameter of orifices, and the number of…
A simple 20×12 cm wall shelf with additional braces for improved rigidity. You will need 3 M3 screws and nuts for the assembly. A solid ("one piece") version is available as well. For the best possible finish print as shown on the…
This Elegoo Saturn 4 Ultra Drip Hanger allows for bed hanging at the steepest possible while also adding a 5degree cant to the rear. All that excess resin will run to the corner of the build plate. Utilizes the printers factory build…
Slim Drip Tray for Gaggia Classic that fits where the normal drip tray does. This adds enough room for a scale to fit underneath Also added a version with rounded edges for easier printing
This is an angled drip mount for Elegoo Mars 4 Ultra. It helps to reduce amount of resin on the build plate after printing and prevents of excess resin fall off both the platform and print itself. Could be printed on Mars 4 Ultra itself…
This adapter is designed to be installed on the build plate and left on. It won’t interfere with normal printing and is set up so it won’t dip into the resin. It can be printed on either a fdm printer (i used my K1) or on the mono m7 pro…
A simple and compact build plate mount for your Saturn 3 Ultra and Mars 4 Ultra to let excess resin drip off on an angle into your vat. If you have a heated chamber you should print it with a more heat resistant material. The recomended…
For easy branching and connecting of the 4.6 mm Supply Pipe or 4.6 mm Drip Irrigation Line. ------ I printed with these settings: Resolution: 0.15 Supports: Yes Infill: 20% Rafts: Skirt Filament: PolyMaker PolyLite PLA Pro Grey
UPDATED - The new version has a slot cut out to fit the updated 16K build plate (the one with the ears) and I am including a mirrored copy in case you want it to hang in the other direction. I built this remix up from scratch. I have…
This is a remix of Cryptothornton design. I've made a bunch of changes. I've tampered the hole that mount it to the unit so that it has a tighter fit on the arm and beefed it up to make it stronger. I also lengthened the arm so that it…
Fits into the bottom and top of the “wall-honeycomb-part.stl”. I have mine held together using the tri-hollow inserts where the borders connect, and then a dual-hollow insert on the ends. I may end up modifying the pieces into a left and…
I would recomend making the faunel from petg or abs to make it more water tight, also use at least 4 perimeters and 35% infil , and add brim while making the funnel, for better finish it may be nessesary to add suport to the holding arm.…
Here are my first 810 Drip Tip designs. The spiral one is designed to prevent spitting. The gun barrel one is just for refining the blank one. I included a step file of the blank Drip Tip so you can add further designs. Have fun :) If you…
Also a Sodastream lover? But washing the bottles for reuse is a burden? Here is a useful tool. From now on simply wash your bottles with mild detergent or clear water and let it dry upside down using the "DripSnout" From now on always…
Print without supports ideally for a smaller layer height (for example 0.15mm). You can use rubber bands from an old atomizer or another 510 drip tip.
Elegoo Saturn 4/Ultra/16K bed drip mount extended to suit buildplates with handles https://www.thingiverse.com/thing:6954020 Category: 3D Printer Accessories
Kitchen sink organiser with built-in drip tray/runoff, so water runs back into the sink so never needs to be emptied and brushes and clothes dry out. The base is universal and fits any of the tops, so you can mix and match colours or…
Various connectors and an end piece for the 1/2" - 13mm Micro-Drip water pipes from Gardena. Depending on your water pressure you might need a hose clamp to secure it properly. If you want to connect your micro drip system to a garden…
Note: I am moving to Maker World, I don't have to time to make new uploads here too. Check it out for new models! https://makerworld.com/en/@gustav.ferdman We've all seen the PET-bottle plantwaterer's. However, this one is adjustable for…
Keep your countertop clean, dry, and organized with this practical 3D printable glass drip tray. Designed for everyday use next to your coffee machine, sink, or kitchen counter. The removable perforated insert allows water to drain away…
This is the Pusi Negotiator . An unofficially designed negotiator for wave filters to be used on the xBloom Studio Omni Dripper 2. Brewing note: I recommend either this recipe designed by @pradyboy for Moodtrap beans, for use with this…
The build plate drip attachment is compact and avoids touching the VAT below it, so there's no need to remove it.
Lots of different divider options to choose from. Pick the one that best fits your needs! __________________________________________________________________ 🧡 Let’s Both Earn Some Prusameters! If you like this model and are thinking about…
A decorative "dripping" (or "melting") brim attachable to the original honeycomb wall by RostaP . It's available as a single solid piece (16 hexagons, 333×77×8 mm) and split in 2 parts (8 hexagons, ~170×77×8 mm each) fitting a regular…
You can put this on your tv stand, bookshelf, coffee table ect. Printer brand: ELEGOO Printer: ELEGOO NEPTUNE 4 Max Rafts: No Supports: No Infill: 20% Filament material: PLA+ Filament brand: esun Filament color: Red
Suggested print settings: Layer height 0.2mm. Infill 15%. Perimeters: 5. No supports are needed. Print-in-place.
printed in PLA 0.25mm 4 bottom and top layers
Slightly modified version of V60 coffee dripper that doesn't need supports (I changed the handle and the bottom part with smaller overhangs and separated rim), you just slide the rim on the body and eventually put glue to the joint if…
This model is intended for Dedica EC885 with naked portafilter. I added a central hole for coffee to drip and a smaller hole to purge a steam wand. The original model this remix is based on was for EC685, so it will work for both, but the…
Simple bracket for draining the excess resin for Anycubic Photon Mono 2.
While many of my Gaggia-related models are specifically designed for the Gaggiuino project, this one is not. People requested a standalone version of my low-profile scales drip tray from the Gaggia Classic | Pro Scales , so here it is!…
If you read this, please leave a ❤! While using my original design I noticed it was difficult to grab onto the build plate with one hand. The caddy was in the way! I've mirrored the design so it mounts on the back of the plate instead of…
This is a drip head for my garden irrigation system, based on the Gardena Micro-Drip hose. I use it to irrigate my tomatoes and chillies with the water from my rain barrel. I have put together a short video of my irrigation system:…
This cap is designed to allow you to fill a 2-liter bottle with water, and then attach a hose that will slowly drip the water into a plant container over a period of time. IMPORTANT: Cut a small washer out of craft foam to help seal the…
Inspired by the drippy bucket I wanted to challenge myself to designing a dripping ice cream cone. From this I wondered how it could be used practically and thus spawned the drippy shifter. This design is made up of multiple parts with…
Modular tray to let dish appliances and cutlery drip of. Designed to sit on the edge of the sink so the water can drip back into the sink. Currently the parts are designed that you need exactly one of each. Height of overhang: 4,6 mm…
Flow restrictor for drip watering plants. And mist sprayer.
This drip bracket could help to recover a big part of the non-used resin and reduce the time to clean the platform. Print with strong infill and at least 4 perimeters.
Drippy Tissue Box For tissue boxes with max. 230 x 115 x 65 mm 0.20mm Standard support only for main part PLA / PETG
Plant drip tray Tray to prevent water leakage over the floor Tray can be customized by downloading the link to OnShape. ( use the free account: https://www.onshape.com/en/products/free ) Just change the desired value and export stl file…
After each resin print, the printed model and buildplate remain covered in uncured resin, which tends to remain on the model and buildplate unless they are tilted. For this, EasyDrip comes to help you, being the indispensable accessory…
🎯 Recommended Print Settings For Best Results Print this design with a standard 0.4mm nozzle at 0.24mm layer height for that sweet spot between speed and detail. We're keeping it lightweight with just 8% infill, which gives plenty of…
Drippy bucket, its now leaking paint onto your desk. Bigger drips and large and small paint leak's. PSA: I am not responsible for damage to any of your property from leaking paint! Inserts for the Drippy bucket found here.…
A modern and sophisticated designed dish for soaps with an integrated grate to collect dripping water. The standard dimensions are 175 mm x 110 mm x 20 mm . Printed with the following settings: Layer Height - 0.2 Walls - 2 Infill - 15% 🚀…
8/7/2023 As requested, I have added a version for the OME Drip Tray This is a drip tray float for NV_WoodCraft's https://www.thingiverse.com/thing:4254986 low profile Gaggia Classic drip tray. The shape will work on the original drip…
Samsung RS6HA stile dispencer tray to catch spills and ice
Here’s a fun little illusion piece I designed—looks like a bright puddle dripping down the edge of your shelf or cabinet. It’s a single-piece print that creates the effect of spilled paint, slime, or wax frozen mid-drip. I printed mine in…
I felt the design of the origional model relied a little too much on layer adhesion strenght, so I added a brace to connect the two mounting points. This should decreace the sheer forces between layers by redistributing this force as as a…
![[REMIX] Drippy Flip-Top Bin](https://media.printables.com/media/prints/609966/images/4848897_0fda6b34-abb8-4201-af3b-21725af2ffd1_398a9720-442d-4da9-bd5c-9711d1ce655e/img-0.jpg)
