Search results: earings

Sort order

972 models

P
PrintablesART TOO

BEARINGS - BEARING COLLECTION - Print In Place

Print in place bearings DIN 625 A oopening is added to insert lubricant TESTED !!! IF YOU NEED OTHER DIMENSIONS? JUST LEAVE A COMMENT

Downloads
834
Likes
266
Rating
5
P
PrintablesVoodoo

Linear Bearings - LM8UU - RJ4JP-01-08

Após algumas pesquisas decidi-me por fazer a minha própria peça. O ficheiro STL já tem a tolerância de 0,2 para ficar com o diâmetro interno de 8mm e externo de 15mm. Basta fazer o slicing com as definições a baixo e deve sair tal como a…

Downloads
183
Likes
19
Rating
5
P
Printablesthedave42

Z-Axis for 3018 Pro CNC - Linear bearings and expanded height

I really wanted to use linear bearings for the X axis on the Sainsmart 3018 Pro CNC I had, but I didn't want to have to swap out the rest of the X axis as well. I made this to work with a 350mm MGN12 linear rail and MGN12H block. You can…

Downloads
139
Likes
19
Rating
0
P
PrintablesStevenTh

Hamster wheel 130mm diameter with spindle without bearings

The hamster wheel for my daughters class pet was squeaky and barely held on. Since it's a very small hamster, I did not find any small enough wheels that could hold onto the cage. Hence I've designed something myself. Wheel specifications…

Downloads
102
Likes
7
Rating
5
P
PrintablesCoach Chambers

Prusa MINI Z-Tower Top Filament Spool Holder (No Bearings)

This filament spool holder is designed specifically for the Prusa MINI and mounts directly on top of the Z tower. It uses a fixed axle that runs through the center of the spool, preventing the common issue of spools falling off the stock…

Downloads
45
Likes
6
Rating
5
P
PrintablesSpammy

Luggage wheel with ball bearings

Fits at least a President-brand luggage. Originals had “hand brake” on due to poor design, wear and tear. These have two 608 ball bearings. I used PLA, but I guess ABS / PETG would work fine too. I used a M5 machine screw as shaft, and…

Downloads
25
Likes
5
Rating
0
P
PrintablesMacbambi

Smallest Spool Winder Adapter with ball bearings!

English: I've always wondered why the spool winders are always so big. I don't have that much space. So I thought about the following: I already have a spool holder for the printer. What I need is a holder to be able to wind a spool. It…

Downloads
19
Likes
4
Rating
0
P
PrintablesSimeon Raykov

Filament guide for 625 bearings

Simple 625 filament guide used on my DIY enlosure You need to print the inner-625.stl 2 times printed with PLA+ secure with a M3x20 screw

Downloads
16
Likes
3
Rating
0
P

Single Finger Fidget (less roller bearings)

I was curious if a fidget would have less friction without the bearings (as provided by a previous design). This design simply uses a v shape to keep the inner and ourter races together. It seems to have lower friction than the bearing…

Downloads
14
Likes
3
Rating
0
P
PrintablesJuNo

Gridfinity 608 Bearing holder (22 bearings) Easy print remix

In my search for a Gridfinity solution to organize my 608 bearings, I discovered one that meets my needs. However, I've faced a problem where PrusaSlicer begins printing the screw holes suspended in the air. To remedy this, I've added…

Downloads
13
Likes
1
Rating
5
P
PrintablesJerryie

Print in place bearings

Print in place small bearing set: https://www.printables.com/model/542689-print-in-place-small-bearings Print in place BALL bearing set: https://www.printables.com/cs/model/583731-print-in-place-ball-bearings Thanks, 3Dprintsmith for his…

Downloads
29,766
Likes
7,526
Rating
4.77
P
PrintablesSHQ

BEARINGS - Print in place - with real rolling elements

Print in Place Bearings with real rolling elements. ! ATTENTION ! - these models are hard to print and fail easily. - your printer MUST be able to print gaps of 0,1mm width - clean your printbed - make sure, great adhesion is possible -…

Downloads
16,272
Likes
5,436
Rating
4.81
P
PrintablesJerryie

Print in place BALL bearings

Quick tips for successful print: Use 3Dlac, glue stick, or Magigoo for better adhesion. ..or simply clean the bed with isopropyl Reduce flow rate to .95 If you are experiencing difficulty with bearing rotation, don't worry it should…

Downloads
11,028
Likes
1,910
Rating
4.45
P
PrintablesPRINTER

Windmill - 100% printable - no support - no bearings - low friction - video

Windmill - 100% printable - no support - no bearings - low friction - video Complete printable windmill which is easy to assemble and expandable with other parts. You need a screwdriver for assembling? Dimensions Length 127 mm Diameter…

Downloads
7,612
Likes
2,901
Rating
4.86
P
PrintablesLordMelkor

Filament Spool Roller w/ 608 bearings

Filament Spool Roller w/ 608 bearings - Snapped together and no bolts - Linear Alignment Rail Remix of https://www.thingiverse.com/thing:2185015 EDIT-8/11: Tolerances of Rail have been adjusted. Tested with a layer height of 0.15mm…

Downloads
5,768
Likes
634
Rating
4.82
P
PrintablesSTORM DESIGN

Winder Spool Holder with Bearings - Modular Design for Bambu Lab Filament Spool Switcher & Winder

BEFORE STARTING THE IMPLEMENTATION OF THE PROJECT, READ CAREFULLY THE ENTIRE DESCRIPTION AND VIEW THE PHOTO GALLERY !!! This is a Remix “Winder Spool Holder with Bearings - Modular Design” for an amazing project " Filament Spool Switcher…

Downloads
4,837
Likes
279
Rating
4.83
P
PrintablesJerryie

Print in place small bearings

My completely redrawn improved bearings. They were inspired by guppik from Thingiverse. They have improvements for easier printing and a new body structure. Print in place bearing set with bigger bearings:…

Downloads
4,689
Likes
692
Rating
4.71
P
PrintablesSTORM DESIGN

Donor Spool Holder with Bearings - Modular Design for Bambu Lab Filament Spool Switcher & Winder

BEFORE STARTING THE IMPLEMENTATION OF THE PROJECT, READ CAREFULLY THE ENTIRE DESCRIPTION AND VIEW THE PHOTO GALLERY !!! This is a Remix “Donor Spool Holder with Bearings - Modular Design” for an amazing project " Filament Spool Switcher &…

Downloads
3,957
Likes
232
Rating
4.86
P

GT2 Belt Tension Meter w/Bearings

Please see original post on GitHub for thorough description, manual and instructions. Geometrically this is the same as the original and the gauge/meter will read just as the first one. Additional BOM: 4- M3x10x4mm bearings (623-2RS), no…

Downloads
3,550
Likes
1,029
Rating
4.82
P
PrintablesPRINTER

Windmill XL - 100% printable - no support - no bearings - low friction - video

Windmill XL - 100% printable - no support - no bearings - low friction - video Complete printable windmill which is easy to assemble and expandable with other parts. You need a screwdriver for assembling? Dimensions Length 127 mm Diameter…

Downloads
3,195
Likes
1,143
Rating
4.94
P
PrintablesSTORM DESIGN

Handle for Manual Rewind and Hexagonal Adapter for Electric Screwdriver for Winder Spool Frame 2 - Modular Design and Winder Spool Holder with Bearings - Modular Design

This is a Remix “Handle for Manual Rewind and Hexagonal Adapter for Electric Screwdriver” for an amazing project " Filament Spool Switcher & Winder " Design by @MiklosKiszely_486882 TO FULLY COMPLETE THE PROJECT, DOWNLOAD THE REMAINING…

Downloads
3,149
Likes
236
Rating
4.83
P
PrintablesDangineering

Rotary bearings 200mm---> 608Z

Trying my hand at making a robot dog and needed a thin bearing for my cycloidal drive, but didn't want to break the bank in just bearings alone. Hence I decided to design one I could use with just some standard 4.5mm steel BBs. Print…

Downloads
2,741
Likes
669
Rating
4.93
P
Printablesmirabatek

PET Bottle Cutter with Bearings

You can use the PET Bottle Cutter to cut sprips from the PET bottles with selected width. The PET strip can be then used in machine which converts it to filament for 3D printers. This cutter is using sharpened bearings, they works like…

Downloads
2,636
Likes
484
Rating
4.71
P
PrintablesJoshRC

Smooth Drawer Slide without Bearings (Vollauszug - Open Drawer System)

Here is the next Design from my "Open Drawer" Series. It is a full lenght drawer guide, that does not need any bearings! This Drawer Guide (in Germany its called Vollauszug btw.) uses the smooth surface of the PLA to run smoothly, so you…

Downloads
2,634
Likes
597
Rating
5
P
PrintablesJerryie

Print in place bearings V2

The bearings are composed of three interlocking rings that can slide past each other to reduce friction. Printable bearings are great for prototyping because they are lightweight and easy to work with. Quick tips for successful print: Use…

Downloads
2,451
Likes
942
Rating
4.78
P
PrintablesJohnMartin

Honing Guide for Chisels and Plane Irons No Bearings and Less Moreness

Low profile chisel and plane iron honing guide. No bearings are required. Assembly Screw both jaws all the way to the center (they should align), then attach the knob. The right side is reverse threaded, and the jaws will only go one way.…

Downloads
2,247
Likes
1,118
Rating
4.71
P
PrintablesHuDSoN

Filament Spool Winder - V3 Precision Remix Collection - No bearings or fittings required

I printed the spool winder by V3 Precision as had a couple spools that were not working well in the AMS. Although it worked and uses no fittings other than the screws to hold it down, it didn't respool as I expected. I had to touch the…

Downloads
1,999
Likes
141
Rating
4

Bearings Library - Airsoft BBs

All the bearings use the standard 6mm Airsoft BBs. Ranging from 20mm, up to 200 mm (outer diameter), in 2 and 5 millimeter steps, and are 7.1mm thick . I don't even know what you could do with a 200mm bearing, but if you do, send us a…

Downloads
1,970
Likes
536
Rating
4.77
P
Printableslogicalplanet

Lazy Susan Mechanism 2.0 (Conical Bearings)

This is a follow-up to my earlier posting of Lazy Susan mechanisms. I had a few comments about conical bearings and decided let's see if it is better and how much better. So here it is... Video at... https://youtu.be/1lg1n2SvySI More…

Downloads
1,852
Likes
405
Rating
4.9
P
PrintablesFibonachio

Prusa Roller Filament holder with 608 bearings

The Prusa Roller is the name of a new filament unwinding tool which fits all common filament rolls. It has been designed so that the extruder has to overcome as little rolling resistance as possible. My motivation for designing the Prusa…

Downloads
1,661
Likes
177
Rating
4.93
P
PrintablesPRINTER

Windwheel - 100% printable - no support - no bearings - low friction - video

Windwheel - 100% printable - no support - no bearings - low friction - video Complete printable windwheel which is easy to assemble and expandable with other parts. You need a screwdriver for assembling? Dimensions Diameter 176 mm…

Downloads
1,652
Likes
678
Rating
4.91
P
Printablestcosta

Modular & Minimal Filament Drybox (with no bearings required option)

Update (27 March 2025) - Uploaded a new thread only (no sides) universal spool holder axel at a user's request. This allows you to use two female ends and adjust to any size needed. See the "Drybox Axel - 50mm Universal Threaded (Male,…

Downloads
1,416
Likes
311
Rating
4.95
P
Printablesfrederikf

100+ Ball bearings in standard sizes (608, 6200, 6202, 6204, 6206, 6000 and 6305 etc.) - uses airsoft 6mm bb balls or 4.5mm steel balls

UPDATED: Slightly larger tolerance (0.1mm diameter for the bearing balls). Choose random seams if you printer is not well-calibrated. I recently needed a slimmer ball bearing for a spinner project, so I did my own take on ball bearings to…

Downloads
1,414
Likes
129
Rating
4.83
P
PrintablesNaNO3

Anycubic Vyper Filament Spool Holder with Bearings

This is an improved filament spool holder for the Anycubic Vyper or Creality CR-6 SE. It fits and locks with the original spool arm provided by Anycubic or Creality. Parts required 2x 608ZZ bearing 1x Spool Holder v21 (0.2mm layer height)…

Downloads
1,340
Likes
197
Rating
4.76

Creality k1 spool holder with bearings

Spool holder uses: 608zz bearings or similiar (8x22x7) M8 bolt 8mm (although 10mm is recomended) m8 nut with lock (prevents loosening) 4x washers (to keep bearings from touching printed parts) Printed with Protopasta filament with default…

Downloads
1,330
Likes
193
Rating
4.55
P
PrintablesRi3del

Grease injector for LMU8 bearings (reworked thread)

The injector design from @uepsie, which I received when I ordered the Zaribo 320, is pretty good. Just the thread wasn't perfect for the tube from Super Lube. So I reworked it. Now it fits real good! :) I hope you gonna like it. Please…

Downloads
1,306
Likes
169
Rating
4.94
P
Printablestransformat

Turbine Windmill | Double Wind Chime with Bearings

Turbine Windmill with Rolling Bearings V4 Update 2026/06/14: What could be better than a turbine windmill? Two of them on top of each other, running in opposite direction 😁 (print the two 'double' files for that) V3 Update 2026/06/05:…

Downloads
1,299
Likes
515
Rating
4.33

Neptune 4 Spool Roller Mod with Printed Bearings

The assembly is simple. Print the parts (1 off for each of the larger components and 2 off for the bearings) and assemble as in the photos. If you want to use a steel bearing, you can replace the printed one with an unsealed 609-9-24-7…

Downloads
1,289
Likes
203
Rating
4.75
P
Printableserick.siders

608 Bearings - Recreator 3D - Community Bottle Cutter - RECYCLE - PET#1 - Plastic Bottle

I remixed the model to accept larger 608 bearings, as they were easier for me to grind flat with their larger size.

Downloads
1,263
Likes
143
Rating
4.5
P
PrintablesEDnation

Voron Spool holder (608 bearings)

Voron V2.4, Trident, V0.2 and Micron Spool holder Important note Be mindful of the type of bearings you use. You don't want too much free spinning. Try to find cheap bearing (it's not every day we can say that !) or use printed bearings.…

Downloads
1,250
Likes
214
Rating
4.92
P
PrintablesPRINTER

Windmill Toroidal - 100% printable - no support - no bearings - low friction - video

Windmill Toroidal - 100% printable - no support - no bearings - low friction - video Complete printable windmill which is easy to assemble and expandable with other parts. You need a screwdriver for assembling? Dimensions Length 137 mm…

Downloads
1,116
Likes
354
Rating
5
P
PrintablesDrJones

spiky hand roller with printed bearings

Someone suggested to make a hand roller using my printed gear bearings - so I did, also throwing in a spiky texture. Printing: This model requires good precision and a well dialed-in printer and filament combination! Main parts: bed…

Downloads
1,109
Likes
321
Rating
4.88
P
PrintablesWilko_SLO

Silent Rotating Table (BALL bearings)

Print with Z=0,2 PLA or PETG You can use it without ball bearings, but for the best performance, SILENT version you need 12pcs 5mm bearings. Buy here: https://www.amazon.de/-/en/sourcing-map-Stainless-Bearing-Precision/dp/B09FDL8YHB/…

Downloads
959
Likes
79
Rating
0
P
PrintablesSouthSerj

Large Spool Filament Holder for 3kg Reels (608 Bearings)

This 3D-printed filament holder is designed for larger filament spools weighing up to 3 kg. It features a robust and stable design, using 608 bearings for smooth and efficient spool rotation during printing. Its simple construction makes…

Downloads
954
Likes
89
Rating
4.83
P
PrintablesWendigo

Filament Spool Holder #002 (Bearings, Simple design)

Minimalist Filament Spool Holder with Bearing System (608ZZ Compatible) A simple, sturdy, and smooth-rolling filament spool holder designed for reliable everyday 3D printing. This design uses only 2 printed parts and features a tool-free…

Downloads
933
Likes
373
Rating
5
P
Printableshumebeam

Printed Linear Bearings

This is a bearing I designed specifically for one of my mods: QIDI X-Max - Improved X-Gantry With Tensioners It's similar in style to the commonly available IGUS bearings but I needed a slightly increased inner dimension (ID) to avoid…

Downloads
931
Likes
127
Rating
4.67
P
PrintablesWilli

Bearings ballfree similar DIN 625-1

If you like this model, please throw me a like. Designing the models is time, filament and coffee consuming. If you want to support my work bye me a coffee. Thanks! Check out my other models. Description: I like the idea of Jerryie's…

Downloads
925
Likes
157
Rating
4.85
P
PrintablesAjax Bachor

Print in place bearings [All Sizes!]

7mm thickness bearings of any diameter! designed for printing! Outer diameter ranges from 17-70mm, Inner diameter ranges from 3-56mm. Print Settings: Random Z Seam 0.2mm Layer Height 2 Perimeter Minimum PRINT THE BEARING WITH THE FLATS OF…

Downloads
905
Likes
332
Rating
4
P
Printables3DesignsCH

Spool Holder remix - for 1-4kg spools - 608 Bearings - no supports

This is a remix of KONEz*347 spool holder with 4x 608 bearings. I adjusted the rollers, no supports needed anymore and added a base to keep the feet together. This spool holder is 144mm wide, so it can handle almost every spool out there.…

Downloads
881
Likes
130
Rating
4.96
P
PrintablesAdrián Vidal

Fully parametric ball bearings

This design allows you to 3d print the casings that will make a ball bearing in combination with some bougth or even 3d printed balls. My chose was some steel balls that i bought on aliexpress but you can use whatever you want as long as…

Downloads
848
Likes
46
Rating
5
P
Printables3DMK

Optical Illusion Pinwheel with Bearings

Remix of Optical Illusion Pinwheel from Dalpek with bigger blades and 608 (2RS) bearings. Turns into the wind. Uses original blades, printed with 180% of original size. Needs three 608 (2RS) bearings and a 4mm diameter rod Print…

Downloads
843
Likes
185
Rating
4
P
PrintablesPRINTER

Windmill XL Cross- 100% printable - no support - no bearings - low friction - video

Windmill XL Cross- 100% printable - no support - no bearings - low friction - video Complete printable windmill which is easy to assemble and expandable with other parts. You need a screwdriver for assembling? Dimensions Length 127 mm…

Downloads
819
Likes
282
Rating
5
P
PrintablesNiuthon

Surreal Vertical Windmills - no bearings, no supports, Moebius inspired garden spinners

Not only are these windmills a rotating piece, but they also serve as a decorative objects with unique, organic forms characteristic of Moebius' art. The model is an elegant addition to gardens, balconies, or any area where you wish to…

Downloads
816
Likes
210
Rating
4.67
P
PrintablesRibby

Ender 3 V2 Filament Spool Holder w/ 608 Bearings

Remixed from: https://www.thingiverse.com/thing:5498768 This remix has areas carved out on both sides of the roller that will accept a 608 bearing. The pins are also remixed so that one end will fit snugly into a 608 bearing, and the…

Downloads
814
Likes
83
Rating
5

ZYLtech Texas/Huge spool holder. 5KG Spool! (4x 608 bearings)

This spool holder will hold up to a 168mm wide spool. It uses 4 608 skateboard bearings with a low tolerance/loose fit on the actual rollers but it fits tight with a small bit of force required to slot them in. if you have strength issues…

Downloads
799
Likes
66
Rating
4.67
P
PrintablesPr20100

Sovol SV06 Top Z bearings

Made from scratch, just few additions to the original to make it easier to print with ASA, ABS… and with bearing of course. Added clearence for the rod hole to prevent pushing down your motor mount when tightened 2 models : Standard With…

Downloads
765
Likes
148
Rating
4.5
P
PrintablesTheRealJonno

Spooly - Anycubic Kobra S1 side spool mount/hanger with bearings

Anycubic Kobra S1 side spool mount/hanger with bearings. This is a side mounted spool holder which incorporates 4 x 608ZZ bearings to give least resistance. It has a lip that fits between the lid and case snugly and securely (make sure…

Downloads
752
Likes
111
Rating
5
P
PrintablesPotterke

Butterfly Knife (with bearings)

Assembly is easy and simple no need for istructions.

Downloads
748
Likes
111
Rating
4.57
P
PrintablesWendigo

Filament Spool Holder #001 (Bearings, Simple design)

3D Printed Filament Spool Holder with Bearings – Simple Design, Tool-Free Assembly This 3D printed filament spool holder is designed to provide a practical, durable, and easy-to-assemble solution for any 3D printer setup. Its minimalist…

Downloads
739
Likes
327
Rating
5
P
PrintablesUser27

QIDI Printers (Q1 Pro, Plus4, X-Max3, X-Plus3, Q2, Max4) Spool Holder with Bearings

I designed this spool holder for QIDI printers because the original one, when used with cardboard spools, often created too much friction. This could lead to false filament tangle detections and also generate annoying noise. After…

Downloads
728
Likes
99
Rating
5
P
PrintablesRaptorHunter

Pocket Hole Wood Jig use 688 Bearings or M8/M10 Nuts

3d printable pocket hole jig for woodworking, use high infill and thick walls to prevent part from buckling when clamping. You can use 688 Bearings or M8/M10 nuts as the drill guide. If you want to use nuts as drill guides use an High…

Downloads
691
Likes
175
Rating
4.5

MORE BEARINGS - Print in place - with real rolling elements

Remixed from https://www.printables.com/model/561588-bearings-print-in-place-with-real-rolling-elements For instructions please see original link. Added: - 6003 — 17/35/10 - 6204 — 20/47/14 I printed mine with a 0.20mm line height profile…

Downloads
691
Likes
160
Rating
4.5
P
PrintablesTheCubingJar

Spool-holder Ultra Smooth no Bearings

ULTRA-SMOOTH RUNNING SPOOL HOLDERS Notice: not my work (scroll down) I tried LOTS of spool holders here, but most of them either required screws, bearings or whatever. Most of them were also quite noisy so I found this one on Thingiverese…

Downloads
680
Likes
34
Rating
5
P
PrintablesLocobian

Heart Earings

Cute heart shaped earnings. Model in the photo is "heat_solid_wireframe.stl", there is another hollow version "heart_wireframe.stl" Earring hooks needed. Print instructions Print upside-down for greater bed contact area. Supports: no.…

Downloads
672
Likes
164
Rating
4.6
P
PrintablesEA3D

SKF 6000 series ball bearings

SKF 6000 Series Ball Bearing Archive

Downloads
662
Likes
55
Rating
0
P
Printablespetkata

Ender 3 V2 Neo axis stabilizer with BB bearings

Remix of https://www.thingiverse.com/thing:5606999 with "build in" bearing using 6mm BBs , adapted for Ender 3 v2 Neo. This can be printed in one go. Print Settings Printer Brand: Creality Printer: Ender 3 v2 Neo Rafts: No Supports: No…

Downloads
643
Likes
89
Rating
5
P
Printablesuepsie

Grease / lube injector with cap for LM8UU / LM8 / LBBR (8mm) and LM10UU / LM10 (10mm) linear bearings

After producing quite a mess while trying to grease my bearings, I quickly designed this injector for LM8xx and LM10xx bearings which fits on the original SKF grease tubes. Just slide it in carfully, press and rotate the bearing - done…

Downloads
622
Likes
79
Rating
4.86

Voron Horizontal Filament Spool Holder w/ 608 Bearings

I really enjoyed this spool holder is it prints very cleanly and does not require supports. I remixed this to use the mount from the "Voron v2.4 Sturdy Handles" as I like to mount my spool holder on the horizontal part of the frame and it…

Downloads
620
Likes
105
Rating
4.85
P
PrintablesMajsterkowo

Filament Spool Stand with Rollers on Bearings V2.0

Parts needed: 4x bearing 608 Maximum spool width: 110 mm Maximum spool diameter: no limit More info and photos: http://bit.ly/2poCEIN Best regards! Lukasz Print instructions Rafts: No Supports: No Resolution: 0.2 Infill: 30

Downloads
616
Likes
55
Rating
4.56
P
PrintablesRob W1RCP

Iambic CW Morse Code Paddles with Bearings and Magnetic Return

The paddles I've created differ slightly from the design that I Remixed. These paddles use bearings for less friction, and the return tension is created with magnets instead of a spring. I have uploaded a PDF with step by step…

Downloads
578
Likes
49
Rating
4.8
P
PrintablesRESTLESS DESIGN

Spool Holder Bearings

I've designed two bearings that you can slide on the stock i3 MK3S spool holder, since this design isn't working very well. The bearings are for ColorFabb 750 gram spools and for the spools that Prusa ships with their printers (I believe…

Downloads
575
Likes
79
Rating
3.67
P
Printablesimototakashi

Turn table: no motors and no bearings are required

A turn table for 3D scanning. No motors and no bearings are required. I used PETG. You can print all parts with standard settings, and you don't need to put support. Assembly Insert the bar into the base. The longer hexagonal rod is for…

Downloads
570
Likes
85
Rating
4.88
P
PrintablesJuraS

Spool Holder adjustable with bearings for Prusa i3 MK3S

Spool Holder adjustable with bearings for Prusa i3 MK3S Original spool holder (no printed double holder) delivered with original Prusa MK3S is not good for smooth unwinding filament. So I designed and created my own. adjustable for…

Downloads
569
Likes
45
Rating
5
P
PrintablesWorks

Parametric Ball Bearings (Print in Place)

PIP Parametric Ball Bearings Made in Ondsel(FreeCAD), change the parameters in the spreadsheet ( Bearing Data ) Parameters included: ID OD Width Ball Clearance Shoulder Diameter No. of Balls Chamfer Refer to the spreadsheet below: Insert…

Downloads
557
Likes
67
Rating
5
P

Hockey stick ornament / earings

A hockey stick ornament that can also be printed as earings. With the hole in the top it can be used as an ornament, scaled down for earings or hung off anything you would like. If going small enough for earings you may want a brim on the…

Downloads
551
Likes
47
Rating
5
P
Printablestoomuchtuna

Prusa i3 MK2/MK3 Spool Holder - 100% Printed with Herringbone Planetary Gear Bearings

This model is a combination of two fantastic 3D models: Emmet's Herringbone Planetary Gear bearings and Martin Majewski's Spool Holder . The motivation behind this project was simply to remove the need for store bought 608 bearings. These…

Downloads
540
Likes
102
Rating
4.9
P
Printablesfifonik

Spool holder with 608 bearings for Elegoo Neptune 4

After creating the simple spool with sleeve for my Neptune 4 I always wanted to have one with bearings. I like HugoHuge's design , but it is too long and bulky, so not possible to use with 250g reels I have. Also, the design has to be…

Downloads
539
Likes
98
Rating
4.69
P

3D Printed Heat Set Insert Press – No Springs, No Bearings!

Tired of installing heat-set inserts crooked? I designed this fully 3D printable press to make installing threaded inserts easier, more precise and repeatable. The press features a parallelogram linkage mechanism that keeps the heating…

Downloads
524
Likes
235
Rating
5
P
PrintablesFloatingCam

Wall Mount Spool Holder with Bearings (Customizable)

A wall mount for spools that use the bearings and aluminum tubes from the MMU tray it replaced. I came up with this Wall Mount for Prusa Multiple Materials 2S Filament Buffer solution because I couldn't fit five Prusa Trays on my desk…

Downloads
514
Likes
67
Rating
4.8
P
Printableshypotesseract

Ender 3 S1 Rolling Spool Holder (6000Z Bearings)

This model is based on the Creality Ender 3 S1 Pro stock spool holder. Each part (tube, caps, shaft) is designed to be compatible with the original holder to allow for partial replacement or modification. Required Hardware This holder…

Downloads
505
Likes
104
Rating
4.88
P
PrintablesEA3D

SKF 6200 series ball bearings

SKF 6200 series ball bearings archive

Downloads
492
Likes
54
Rating
0
P
Printableseurad

Prusa spool holder (with bearings)

Centering spool holder with 608 bearings to be used with the original spool holder for the Prusa MK3S+. I have some TPU which sticks quite well to itself so I needed a spool holder which allows for super-smooth rotation so the filament…

Downloads
474
Likes
87
Rating
4.67
P
Printablesfuchsr

Filament Spool Holder with 608 Bearings for Prusa XL

I like my Prusa XL tool changer but don't care for the spool holders they included. This is a remix of @hugoG_253127's “Filler” filament holder to work with the hardware provided with the XL. By using 608 ball bearings, friction is…

Downloads
468
Likes
71
Rating
5
P
Printablesmethlon

Hanging Bat earings

made in Zbrush iv sized the print to 30mm long but you can adjust it to suet you (the model is larger) printed on X1C using a 0.2mm nozzle, 0.6mm layer height, 2 walls and 10% grid infill printed flat face up using snug supports the back…

Downloads
465
Likes
77
Rating
5
P
PrintablesDeimos

Earings organiser (earing stand, accesories organiser)

My model, no remix Print instructions Category: Earrings Summary My model, no remix Print Settings Printer Brand: Anet Printer: A8 Rafts: No Supports: No Resolution: 0,16mm Infill: 100% Notes: Printed side down and with brim

Downloads
463
Likes
79
Rating
5
P
PrintablesVitamina 3D

Spinner for 608 bearings

Hardware required: 4 bearings 608 (Dext = 22mm;Dint = 8mm; h = 7mm). Layer height 0.2mm. Printing speed 50 mm/s. The caps and the bearings fit perfectly in each hole. However, you may need to scale the models a bit under 100%, specially…

Downloads
456
Likes
31
Rating
4.67
P
PrintablesHolzerMax

Bearing Blocks for 608 Bearings

It is a very simple model. It has a lip on one side for the bearing to rest against. Maybe you have to very slightly shim around the bearing, as I designed it for a slightly loose fit (at least for my setup). The screws might be a little…

Downloads
448
Likes
99
Rating
5
P
PrintablesAnimeted

Awesome Filament Spool Rewinder Printable 608RS2 Bearings

I tried printing the original bearings and couldn't get them to spin freely. So I found these bearings and adjusted them to the same size. I might try testing with the smaller bearings too, since these work so well and the design seems to…

Downloads
447
Likes
43
Rating
5
P
PrintablesDennis W

Neptune 4 Spool Roller Mod with 608 Bearings

Spool roller for Neptune 4. Should also fit for Neptune 3 and maybe other printers.

Downloads
443
Likes
50
Rating
4.44
P
PrintablesPrint4Gods

Spray painting turntable with 608 ball bearings/ lacquer Spray Painting Spinning easy and fast to print, 608 bearing

I have enlarged the painted turntable to 25cm as well as adjusted the foot. It is very fast and easy to print without support structure Thx @ https://www.printables.com/de/@Kahnindustries ich habe die lackier Drehscheibe auf 25cm…

Downloads
434
Likes
63
Rating
3
P

Central filament spool axis with bearings.

I've seen many of these around but haven't got 100% satisfied with them, so I designed my own version. It's very useful if you want zero friction on your spools. This fits with almost all common 1kg spools. It fits spools with internal…

Downloads
430
Likes
50
Rating
4.8
P
PrintablesMekCreate

MK4 Z-Axiz 608z Bearings

Just a small upgrade to make the Z-Axis more stiff by adding some bearings on the top part. Before and after Version History V1.2TH Same as V1.2 but added through hole on top, so it will be easier to get the bearings out again. V1.2 Added…

Downloads
429
Likes
111
Rating
4.63
P
PrintablesMat3D

Flashforge 5m Spool Roller With bearings - Frictionless

This is a modification of the roller model that is provided by Flashforge in the part files found on their wiki page. I modified it to work with HugoHuge's universal roller. So the roller and roller guide are directly from him. I only…

Downloads
426
Likes
66
Rating
4.67
P
PrintablesXVIIarcano

Adjustable pressure clamps for Hadley telescope altitude bearings

These are spring loaded clamps for the “standard” plastic frames and tubes base included in the official Hadley telescope model and its metric remix version . The clamps are based on M4 hardware left over from my metric build, but will…

Downloads
418
Likes
47
Rating
4.8
P
PrintablesBryce_Abery

Bearings

Print and place bearings

Downloads
413
Likes
25
Rating
5
P
PrintablesMarSzal7500

IKEA Skadis- 608 bearings dispenser- no supports

A dispenser for twelve standard 608 bearings compatible with the IKEA Skadis perforated board system. When printing, it is recommended to use a gyroidal infill and lower print speeds to maintain maximum precision, so that the bearings do…

Downloads
411
Likes
137
Rating
5
P
PrintablesMiChAeLoKGB

Gridfinity 608 Bearing holder (22 bearings)

I liked the original model, but I wanted it to hold at least 20 bearings instead of 18. I managed to squeeze in 22.

Downloads
406
Likes
43
Rating
4.9
P
Printablestomi3d

Hamster Wheel (with bearings)

All parts can be printed without or very minimal support. Printed part list: Wheel Leg - Right Leg - Left Base - Back Base - Front Arm x2 Seeger - Small x2 Seeger - Large x2 Other parts: M3x12 screw x6 M3 nut x6 Ball bearing x2 (inner…

Downloads
403
Likes
58
Rating
4
P
PrintablesMRLeach85

Creality K1 Max - Top Spool Holder w/ bearings (for printing TPU)

Top mounted filament spool holder. Used for printing TPU on a K1 MAX. The adapter rings are a press fit into the original side supports to adapt them to fit standard cartridge bearings. The spool roller should be a slip fit into the inner…

Downloads
403
Likes
40
Rating
4.67
P
PrintablesEngineer3DGeek

Earings holder Horse

Created this earing holder for an equestrian fan. The horse just snaps into the base.

Downloads
402
Likes
85
Rating
5