14,444 models
Various connectors compatible with Brio, IKEA Lillabo (old plastic dogbone and current wooden-only version too), Thomas Train, Kaufland, LIDL Playtive, kmart, ebay,... wooden tracks. UPDATE: 30 mm male-male connector! Print instructions…
Print approx. €0.22–€0.27 excl. taxPreliminary estimate for one variant
Protects your Joy-Con sticks from getting drift issues. Simple slide on and pull out. Prevents from tilting and clicking the sticks during travels. Available for Joy-Cons and the Pro-Controller.
Print approx. €0.15–€0.18 excl. taxPreliminary estimate for one variant
Beer/Pop Can Opener/Protector SIMPLE PRINTED TWIST CAP USE ON YOUR BEER AND POP CANS TO KEEP NASTY SUMMER CREATURES OUT OF YOUR COLD DRINKS OPENS AND SEAL CANS FITS STANDARD 355M TAB CANS BEER AND SOFT DRINK CANS SHOULD FIT MOST CANS POP…
Print approx. €0.48–€0.58 excl. taxPreliminary estimate for one variant
Use tree supports :) Want to have a commercial licence on this model? → Join the CLUB :)
Print approx. €2.90–€3.54 excl. taxPreliminary estimate for one variant
Various designs for XT30 connectors Here you will find my designs for the XT60 size and MR30-M . News 12.03.25 Step files available 22.11.23 added design of angled and round mounting bracket 02.11.23 added design of standard mounting…
Print approx. €0.12–€0.14 excl. taxPreliminary estimate for one variant
A one part Cheshire-style collimation eyepiece (1.25 in). More effective than a standard pinhole collimation cap, especially when lighting is not optimal. Update 02-2025: Added a version of the eyepiece with crosshairs. Make sure to print…
Print approx. €1.43–€1.75 excl. taxPreliminary estimate for PETGSource material: PET
⚠ Important: Do not over-tighten the bottle to avoid damaging the print. Use tree supports only on build plate Introducing Drill Dust Collector and Guide V3 —the ultimate tool for keeping your workspace clean while drilling. This upgraded…
Print approx. €0.35–€0.42 excl. taxPreliminary estimate for one variant
*****Note: Please read the complete instructions before printing this file. Most likely you will have to print this model at about 100% to 108% scale – so, if you don't measure your printer's dimensions before you print, chances are that…
Print approx. €0.24–€0.29 excl. taxPreliminary estimate for PETGSource material: PET
Overspray protector as sold by my favourite motorcycle (and bicycle) care product manufacturer, O.K. Wack Chemie, under the name “SauberSepp” or “CleanBob”. Of course, mine is better :) I have added sides to the reservoir to keep the lube…
Print approx. €1.09–€1.33 excl. taxPreliminary estimate for one variant
AirTag Bike Mount / Reflector Apple AirTag is a fantastic little device, and I wanted to be able to use one to track my bike in case of loss or theft. There are expensive accessories out there, but I wanted an inconspicuous, stylish, and…
Print approx. €0.53–€0.65 excl. taxPreliminary estimate for one variant
Part of my series of enclosures designed for Shelly smart devices and Wago 221 connectors. Shelly box for T&E 3x slots and wago 221 connectors Shelly box for inline flex wire and Wago 221 connectors (this one) Shelly box for 2x flex wires…
Print approx. €3.55–€4.34 excl. taxPreliminary estimate for PETGSource material: PET
printed with PLA, but can be Petg or TPU. TPU would be best choice. If you need some help, or need change the sizes please contact me
Print approx. €0.78–€0.95 excl. taxPreliminary estimate for one variant
Update: v1.1, July 27, 2021. Model slightly uppdated to suit other of my output connectors. Sliced with 0,15mm layer height. A pdf file added: Parkside battery system.pdf, (placed under Download package). This is one of my first printed…
Print approx. €1.16–€1.41 excl. taxPreliminary estimate for one variant
This are protector for the expensive original Apple Lighting cable, develop this thing to try to avoid buying new cables twice a year. Better if printed in TPU or flexible material, but works with PLA and ABS or Petg Basic setting, 0.2…
Print approx. €0.61–€0.75 excl. taxPreliminary estimate for one variant
I was looking for a solution that prevents the suction hose and the cable getting caught on the end of the guide rail when sawing with my Festool TS55 saw. I printed first the excellent model…
Print approx. €0.77–€0.94 excl. taxPreliminary estimate for one variant
This magnetic clip is designed in Fusion360. The model in fotos is printed on my Prusa Mini+ with 0,6mm nozzle and 0,2mm layer height. I used support cubic infill but check my G-code for more info. No supports needed. I used magnet of…
Print approx. €0.22–€0.26 excl. taxPreliminary estimate for one variant
This battery adapter is used in multiple of my other designs. For Bosch 18V Professional Batteries, see my design here: https://www.printables.com/model/427974/ For Milwaukee M18 Batteries, see my design here:…
Print approx. €4.45–€5.44 excl. taxPreliminary estimate for one variant
Basic track connector for hot wheels track
Print approx. €0.46–€0.56 excl. taxPreliminary estimate for one variant
This is a remix of Jakeleeee's Prusa Mini 48deg heatbed connector cover, which stretches it to be about 3mm longer, to provide the additional clearance that I found was required on my Prusa Mini+ to allow the cables to exit without being…
Print approx. €0.74–€0.91 excl. taxPreliminary estimate for PETGSource material: PET
Miniature director's chair. Printable without supports and in two colors by simply changing the filament (in height) in the 2 fabric areas. The original size is: 73mm (height) x 47mm (width) x 35mm (depth). You can use supports or accept…
Print approx. €0.85–€1.04 excl. taxPreliminary estimate for one variant
Improved MMU2 selector with rectangular slot for magnet found in Prusa MK3S/MMU2S kit parts. This is a modification of the E2 version of MMU2 selector mod by emanuvele, inspired by same modification of the previsous V9 version done by…
Print approx. €1.80–€2.20 excl. taxPreliminary estimate for PETGSource material: PET
Zip-Tie Garden Hose Coupler | 16mm Water Line Connector This simple yet effective 3D printed connector lets you quickly join two 16mm diameter garden hoses without specialized tools or fittings. Perfect for extending your watering reach…
Print approx. €0.24–€0.29 excl. taxPreliminary estimate for PETGSource material: PET
tl;dr This is a modified side handle for the CORE One, designed to integrate a PC4-M10 fitting. This allows you to quickly connect PTFE Bowden tubes, e.g. for connecting an external drybox or spool holder. Using the mod To connect a PTFE…
Print approx. €0.62–€0.76 excl. taxPreliminary estimate for PETGSource material: PET
Update: 5 Jun 19. I had a problem with occasional jams during loading with blunt tips hitting the blade. I've modified the selector and blade cover a bit further to prevent this from happening. I've also made the blade "sockets" much…
Print approx. €3.17–€3.88 excl. taxPreliminary estimate for PETGSource material: PET
Replacement adapter to 36mm cleantec hose. It does not swivel, preventing the hose to get stuck on the rails. The side panel of the tracksaw needs to disassembled to install the new adapter.
Print approx. €2.79–€3.40 excl. taxPreliminary estimate for PETGSource material: PET
Bodenschoner für Festzeltgarnituren mit einer Breite von 30m. Zur Befestigung können Kabelbinder bis zu einer breite von 8mm genutzt werden. Je nach Anforderung kann der Bodenschoner direkt verwendet werden (z.B. um Steinböden zu…
Print approx. €2.00–€2.44 excl. taxPreliminary estimate for PETGSource material: PET
The original model from thingiverse.com called “Brio/ Thomas rail switch (Duplo design)” by FuriousSun is quite nice. However, I think having female connectors on one side, but male connectors at the other side fits better with the…
Print approx. €0.43–€0.52 excl. taxPreliminary estimate for one variant
Dallas Korbin Vector CP1 Hand Gun. Korben Dallas, the protagonist of the movie “The Fifth Element”, uses a Vektor CP1 pistol throughout the film.. The Vektor CP1 is a semi-automatic pistol that was designed and produced in South Africa1.…
Print approx. €15.49–€18.94 excl. taxPreliminary estimate for one variant
A projector for GoBo that can be mounted on any flash (preferably one with a Led pilot light, such as the Godox MS300V). This is a personal elaboration inspired by the work of Petri Damsten ( http://petridamsten.com/gobo-holder/ ) and…
Print approx. €3.03–€3.71 excl. taxPreliminary estimate for PETGSource material: PET
Anderson PoperPole connectors are popularly used for Amateur Radio equipment, but for small low power gear the power cables are often small diameter and need some strain relief when soldered to a PowerPole connector. This clip supports a…
Print approx. €0.28–€0.34 excl. taxPreliminary estimate for PETGSource material: PET
Hose quick connector male to ¾" BSP commonly found on UK garden hose fittings e.g. Hozelock, Gardena etc. Add one standard o-ring 2.5x11 (OD: 16mm, cross section 2.5mm) to make leakproof. I printed in standard PLA settings, supports…
Print approx. €1.05–€1.29 excl. taxPreliminary estimate for one variant
Introducing the Drill Dust Collector And Guide V2 , an upgraded solution for clean and hassle-free drilling! This new version features a larger container to hold more dust , an optimized design for better side dust capture , and the…
Print approx. €1.66–€2.03 excl. taxPreliminary estimate for one variant
This is an improved antenna, buttons and display for this Stalker Bear Detector . With these improvements you'll find artifacts in no time! Print instructions The antenna part has quite a lot of thin parts. With FFF 3D printers it may be…
Print approx. €0.28–€0.34 excl. taxPreliminary estimate for PETGSource material: PET
I was needing a part to connect a vacuum hose to my circular saw to extract wood chips and dust I designed the part in Fusion 360 with a female connector to enter the circular saw exits and an internal screw thread for the vacuum hose I…
Print approx. €1.88–€2.30 excl. taxPreliminary estimate for PETGSource material: PET
A remix of the JST Connector Pliers to keep them from falling apart. This model will need one heat-set insert for a 3mm screw and a 3mm x 6mm screw to keep them together. As with the original model, print in your choice of filament with…
Print approx. €1.77–€2.16 excl. taxPreliminary estimate for one variant
Since I only have hozes with the "Gardena" couplers, I remixed the original design and added the coupler. I advise to print it with the 5 nozzles facing downwards and add a large (10-20mm) brim around it so it is kept fixated to the bed.…
Print approx. €1.54–€1.89 excl. taxPreliminary estimate for one variant
Introducing the Wood Connector LTX, a heavy-duty solution designed to join rectangular wood pieces for creating robust and custom shelves. Engineered with precision, this connector features durable 3D-printed construction equipped with…
Print approx. €2.14–€2.62 excl. taxPreliminary estimate for PETGSource material: PET
The original Part part did not fit on my boxes. I wasn' t able to mount it on the box without it breaking apart. On my box the material perhaps is a little bigger? In addition, it would not have been possible to open it because the…
Print approx. €0.23–€0.28 excl. taxPreliminary estimate for PETGSource material: PET
Halterung für GoPro an dem LS2 Vector 2 Helm.
Print approx. €1.22–€1.49 excl. taxPreliminary estimate for PETGSource material: PET
This improved file has an integrated thread for a standard PC4-M10 PTFE tube push connector. This allows for you to print your own threaded part for the best push connector option rather than having to break out the soldering iron for a…
Print approx. €0.23–€0.29 excl. taxPreliminary estimate for one variant
This model is quite small (61mm long). If you want a bigger model, I've also made a 210mm long version with more detail . Vectors “The Vectors were as minimally designed as a starship could be. Little shielding, almost no weaponry, very…
Print approx. €0.61–€0.74 excl. taxPreliminary estimate for one variant
Set of designs to make a ‘table top’ or connector for on top of a DeWalt Tstak toolbox. I used one to create a connector to hold my Ryobi Vacuum on top using https://www.printables.com/model/1044158-ryobi-link-wall-mount-single-cleat as…
Print approx. €0.62–€0.76 excl. taxPreliminary estimate for one variant
“The Vectors were as minimally designed as a starship could be. Little shielding, almost no weaponry, very little computer assistance. The Jedi were the shielding, the weaponry, the minds that calculated what the vessel could achieve and…
Print approx. €0.08–€0.09 excl. taxPreliminary estimate for one variant
Please like and follow and post your makes This is a speaker redirector for the Xiegu G90. It was designed to be held in place by the G90-H1 bracket, but tape would also work. I made the redirection cone much shorter than the original…
Print approx. €2.46–€3.01 excl. taxPreliminary estimate for one variant
An aternative to the existing Lenovo Legion Go Joystick Protectors
Print approx. €0.29–€0.36 excl. taxPreliminary estimate for one variant
Terminal cap for 9 volt batteries. Marked with “9V”, quick print. Recommended print settings: Layer Height: 0.2 mm or less Infill % : 15 Supports: No Print Orientation: Default as modeled Material: PLA Raft: No Brim: No
Print approx. €0.06–€0.07 excl. taxPreliminary estimate for one variant
layer height: 0.20mm or lower. material : tested with PLA and PETG. requires 10mm bridging and decent bed adhesion.
Print approx. €2.88–€3.53 excl. taxPreliminary estimate for one variant
Easiest remix I've done using only the text modifier in Prusa Slicer 2.6.1 to make a triangular hole as volume level marker. I've included the .3mf file so you can remix your own.
Print approx. €0.16–€0.20 excl. taxPreliminary estimate for one variant
This is a replacement part for the Raspberry Pi Zero CSI connector. I printed this with a 0.4 mm nozzle at 0.1 mm layer height with PLA. I printed ten at a time to allow for cooling between layers.
Print approx. €0.05–€0.06 excl. taxPreliminary estimate for one variant
Do you have a problem with loose filament ends? Change it now!!!! This tool will help you connect the fibers. Just insert two tips, heat with a soldering iron or lighter and connect. (Can be cleaned with a knife)
Print approx. €0.25–€0.30 excl. taxPreliminary estimate for one variant
This connector fits into the opening of the Polymaker PolyDryer dryboxes and attaches to the smaller 4mm PTFE tubes. This is useful for boxes that are equipped with an auto-rewinder spool and ensures the tubes are not pulled inside (this…
Print approx. €0.08–€0.10 excl. taxPreliminary estimate for one variant
A propeller/wing protector for the inexpensive Drone Pro/E88/E99/E58 drone. This drone is a knock-off of the toy quad-copter, the “Eachine E58”. You can easily find this USD $20 drone on marketplaces such as Temu and AliExpress. Tested…
Print approx. €0.14–€0.17 excl. taxPreliminary estimate for one variant
Multiboard connector for items with mounting points for regular screws. Can for instance be used to connect Ryobi chargers to Multiboard. Recommended print settings (same as Multiboard defaults): 3 wall perimeters in wall thickness 15%…
Print approx. €0.15–€0.18 excl. taxPreliminary estimate for one variant
This is a reinforced internal 90° connector for 2020 V-slot aluminum extrusion profiles . It fits snugly inside two intersecting profiles, joining them at a perfect right angle (90°) with a secure snap-fit / friction-fit connection . This…
Print approx. €0.21–€0.26 excl. taxPreliminary estimate for PETGSource material: PET
[EN] You can find the description in English below [ES] Escuadras de Ensamble en X y T para Melamina de 16mm Estas escuadras de ensamble en X y T son la solución perfecta para quienes trabajan con melamina de 16mm, proporcionando una…
Print approx. €5.45–€6.66 excl. taxPreliminary estimate for one variant
Allows for a single place/tool to hold your billiards cue joint protectors while not in use.
Print approx. €0.72–€0.89 excl. taxPreliminary estimate for one variant
I created this modular dish rack which can be connected together to fit in your kitchen Cabinet. 3mf file included so you can cut it for a perfect fit
Print approx. €6.09–€7.45 excl. taxPreliminary estimate for one variant
Inspired by Majed's iPhone Charge Cable Protector design, this adapted to work with MacBook charging cables. I recommend to print vertically with brim for good bed adhesion. Even though this may seem like a simple model, it still takes…
Print approx. €0.22–€0.27 excl. taxPreliminary estimate for one variant
A wall-mount holder that fits your Epson projector remote control snug and secure, yet slides right in and out. Mounts using screws. Prints great with PETG on Prusa i3 MK3, but it'll surely work well with other materials. Feel free to…
Print approx. €2.00–€2.44 excl. taxPreliminary estimate for PETGSource material: PET
I was needing to connect a vacuum hose to my table saw to extract wood chips and dust I designed the part in Fusion 360 with a cone to enter the table saw exits and an internal screw thread for the vacuum hose. After several tests I found…
Print approx. €4.16–€5.08 excl. taxPreliminary estimate for PETGSource material: PET
7/21/21 - This is a little mount I created for my radar detector to sit right above the center screen of my Model Y. Not sure how well it will stay put in the vehicle as I have just printed it. I am not responsible if this causes any…
Print approx. €1.28–€1.56 excl. taxPreliminary estimate for one variant
The Jedi Vector is the starfighter used by the Jedi Order during the High Republic Era. This is the version used in The Acolyte, about 100 years before episode I. It is the successor of a different Jedi Vector from 100 years earlier. This…
Print approx. €0.22–€0.27 excl. taxPreliminary estimate for one variant
shrek
Print approx. €2.85–€3.49 excl. taxPreliminary estimate for one variant
WAGO Compact Wire Stripper for 221 Connectors Description This Compact Wire Stripper for WAGO 221 Connectors is a practical and space-saving tool designed to strip wires to the perfect length for both 4mm² and 6mm² WAGO connectors. It…
Print approx. €0.49–€0.60 excl. taxPreliminary estimate for one variant
A plant pot inspired by the intricate structure of a slide projector. Used Filament: This model was printed using PLA Mineral Natural from Fiberlogy. The PLA Mineral series is our all-time favourite! The amazing texture of the finished…
Print approx. €4.09–€5.00 excl. taxPreliminary estimate for one variant
This bottle connector allows you to join two plastic bottles together, creating an exciting vortex effect. Fill one bottle with water, attach the connector, and invert the bottles so the water-filled bottle is on top. Shake it, and watch…
Print approx. €0.96–€1.17 excl. taxPreliminary estimate for PETGSource material: PET
Connector between flexible ventilation duct and 80mm fan
Print approx. €1.40–€1.72 excl. taxPreliminary estimate for PETGSource material: PET
I couldn't find any existing models that perfectly fitted my needs (collecting coins from 50 cents to 2 euros and were not too bulky), so I designed my own model. Feel free to customize the dimensions (or anything else) to better suit…
Print approx. €1.36–€1.66 excl. taxPreliminary estimate for one variant
Couldn't find the right size sieve for metal detecting duties so drew one myself. Printed in 4mm thickness but I feel that 3mm would have been sufficient. Model is quite large, could be scaled 80-90% and still fit an adult hand comfortably.
Print approx. €15.38–€18.80 excl. taxPreliminary estimate for one variant
This 3D-printed IDC box header frame is designed to convert a regular 2-row pin header into an IDC box header. This is a useful solution for those who need to replace an IDC box header but cannot find one in stock, or for those who want…
Print approx. €0.14–€0.17 excl. taxPreliminary estimate for PETGSource material: PET
This is a connecting piece to stack Ikea LACK table to build up an enclosure tower. There are many designs for this purpose but I wanted to make my own one that has clean look and detachable structure. The design consists of cylindrical…
Print approx. €14.25–€17.42 excl. taxPreliminary estimate for one variant
corner and edge protector for float glass 6mm; can be used e.g. to securely store the float glass tabletop of the garden set during winter;
Print approx. €5.50–€6.72 excl. taxPreliminary estimate for PETGSource material: PET
A connector to make a square equilateral pyramid out of straws. Uses the white part of the straw from boxed milk.
Print approx. €0.14–€0.17 excl. taxPreliminary estimate for one variant
This is a replacement for the lower leg joined for a X-500 style quad drone. This part will work for https://amzn.to/41AV1Jv (500-X4 Carbon Fiber Quadcopter Frame Kit). It will fit any X-500 drone that uses 16mm (OD) down tube for leg and…
Print approx. €1.58–€1.94 excl. taxPreliminary estimate for one variant
Discretely protect your bike from getting stolen. There are 3 total parts to this print (the bottom, the top, and the connector) and all you need are 3 screws to put it together (M3 12s will work). The bottom part is printed in Hatchbox…
Print approx. €0.69–€0.84 excl. taxPreliminary estimate for PETGSource material: PET
A Arduino/ESP8266/NodeMCU based RS232-MQTT-Bridge to control a beamer via the serviceport. You find the Firmware on my GitHub-Repo: BeamerControl Print instructions Parts 1x NodeMCU V2.x 1x MAX3232 RS232-to-TTL Adapter 4x 2.5mm Heat…
Print approx. €0.40–€0.49 excl. taxPreliminary estimate for one variant
Dust Protector for Prusa I3 MKE Z-Motors. -Single part for left/right with option for the mating plane (V1 is the same as the original) -Tighter fit around the spline screw and the guide rod: 8.8mm for the spline screw / 9.0mm or the…
Print approx. €0.46–€0.57 excl. taxPreliminary estimate for one variant
USB A Male Connector Shield for this connector on PCB https://www.aliexpress.com/item/33047977518.html
Print approx. €0.31–€0.38 excl. taxPreliminary estimate for PETGSource material: PET
Just minor modifications and deepened blade slot like the latest prusa design.
Print approx. €1.74–€2.13 excl. taxPreliminary estimate for PETGSource material: PET
A better tap for the Smoby rainwater tank. The original tap breaks of very easy (mine did). My design uses a more rigid knob. I only designed the inner part, you can remove the original inner part very easily: After you unwind the tree…
Print approx. €0.67–€0.82 excl. taxPreliminary estimate for PETGSource material: PET
Leifheit make great cleaning products, but in an effort to make more money on selling handles, the connector head of their dusters (push-in with clip) is different to the connector of the mop (screw-in). This model will allow you to use…
Print approx. €0.75–€0.92 excl. taxPreliminary estimate for one variant
I created this cap because on my Samsung laundry machine the "child lock" feature leaves the power button working and my kid constantly turns it off while it's working, so I have to start the program again. Just use double sided tape to…
Print approx. €0.83–€1.02 excl. taxPreliminary estimate for one variant
I've printed finke stand but it appears it was to small for my 15,6" laptop so I designed an extra leg so the laptop is not tilting backwards. The leg is pressed into the triangle hole of the leg. It is a nice tight connection but it is…
Print approx. €1.35–€1.65 excl. taxPreliminary estimate for one variant
I recommend set printer to print 4 perimeters (due to self-cut screws). You will need M2.5x10mm conic head screws to connect bottom and top part together.
Print approx. €1.25–€1.53 excl. taxPreliminary estimate for one variant
The jaw protectors fits to a jaw width of 100mm (102). I printed the protectors in PLA and TPU as solid parts. A sample gCode is added but my recommendation is to create your own with reference to your filament wish. Any questions or…
Print approx. €0.80–€0.98 excl. taxPreliminary estimate for one variant
Projector HY300 Cover This 3D model is a protective cover for the HY300 projector. It is designed to cover and shield the projector lens from dust, scratches, and other damage when not in use. The model is lightweight, easy to attach and…
Print approx. €1.95–€2.38 excl. taxPreliminary estimate for one variant
Ghorlectopod Silk Spider. The Gorlectopods are a species of large, spider-like creatures native to the planet Ghorman. They are significant due to their unique biological capability of producing a highly prized silk known as Ghorman twill…
Print approx. €1.93–€2.36 excl. taxPreliminary estimate for one variant
My Mother asked me for a Rain Collector which she can install on her balcony so she can collect rainwater for her sensitive plants that don't like the mineral rich tap water. After the first prototype died of bad design, MK III is in use…
Print approx. €34.14–€41.73 excl. taxPreliminary estimate for PETGSource material: PET
Hello, This is a replacement dryer knob I made for my GE DBSR453EB0WW dryer. It has a couple of features that make it a little harder to print, like the small rise on the bottom which requires support material, but it matches my dryer…
Print approx. €1.48–€1.80 excl. taxPreliminary estimate for one variant
A Y splitter that is melded to the MMU3 front plate, which allows for direct filament use (disabling the MMU3 in the Prusa menus) OR using the MMU3 for multi-material. I created this because, factoring in the material storage, buffers,…
Print approx. €1.24–€1.52 excl. taxPreliminary estimate for PETGSource material: PET
I used the “ Magnetic Dust Collection Connectors ” from Robert Bieber and added the male part for a DN110 connection. For assembly information visit the original part and read the description.
Print approx. €8.18–€10.00 excl. taxPreliminary estimate for one variant
This is a simple two part holder for mounting a collapsible photography/videography bounce reflector to a cheap light stand. I wanted something to hold a reflector to a stand but couldn't find anything i was happy with, so made this up.…
Print approx. €1.29–€1.57 excl. taxPreliminary estimate for one variant
Model Info | Introduction I want to introduce you to an easy-to-print Bowens Mount Lamp Reflector. I use it printed in PLA with my lamp up to 50% of the maximum wattage, and it doesn't melt or get soft. Save your money as these typically…
Print approx. €10.17–€12.43 excl. taxPreliminary estimate for one variant
My kids kept destroying the cards when we play Exploding Kittens so I picked up sleeve protectors to help them last longer. On the plus side the cards are in great shape. On the other side, they no longer fit in the tray that comes with…
Print approx. €4.36–€5.32 excl. taxPreliminary estimate for one variant
Motivation I want to use solar panels of an old solar system (Conergy C175M) in combination with a Microinverter for a balcony power plant. [A: Panel groups connected in parallel] As the panels have low power values (compared to current…
Print approx. €2.24–€2.73 excl. taxPreliminary estimate for PETGSource material: PET
Connector between sith lightsaber ( https://www.printables.com/cs/model/3722-collapsing-sith-lightsaber-removable-blade ) and jedi lightsaber ( https://www.printables.com/cs/model/3721-collapsing-lightsaber-removable-blade ). A little…
Print approx. €2.01–€2.46 excl. taxPreliminary estimate for PETGSource material: PET
Print WITH SUPPORTS!!! 15% infill is fine. You can pull the supports out with plyers, wire cutters, or many other household items. I use Elegoo PLA (1.75MM, 1KG) and it works fine. You can probably print in any material. It doesn't…
Print approx. €1.88–€2.30 excl. taxPreliminary estimate for one variant
I purchased the tool for my xLDC Quick Release to make it easier to crimp the ribbon cables. This is because more connectors have to be crimped with the xLCD than with the quick release of the MK3S+. You need a quick release if you want…
Print approx. €0.31–€0.37 excl. taxPreliminary estimate for PETGSource material: PET
The main reason I made this for is the Nextbase dash cam, from which it is very hard to eject the card if you don't have long nails. It also features a cable hook to attach it to a nearby cable so you don't lose it.
Print approx. €0.14–€0.17 excl. taxPreliminary estimate for one variant
A connector for making a truncated icosahedron out of straws. The two sockets with flat bottoms are 108° from each other and form the outside of one of the solid's 12 pentagons. All pentagon edges are connected via one of these two…
Print approx. €0.12–€0.15 excl. taxPreliminary estimate for one variant
