Search results: enclose

Sort order

216 models

P
PrintablesMupshot

remixed D&D dice box with enclosed magnets

Larger scale requiring a pause to insert the magnets so they are covered by a few final layers of plastic. magnet wells are 8x3mm I used 8x2 in my POC and the adhesion isnt as strong as I would like, so use 8x3 magnets if you can, or use…

Print approx. €4.87–€5.95 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
29
Likes
2
Rating
0
P
Printablesthrutheframe

BentoBox v2.0 Carbon filter for Bambu Lab X1C, enclosed P1P & Voron Trident & others?

IMPORTANT Please download the "BentoBoxV2 2023XXXX.3mf" project 3mf file and “BentoBox20 User Guide 2023XXXX.pdf” Descriptions, BOM and build instructions are in there. I try my level best to make it as comprehensive as possible. Use only…

Downloads
43,320
Likes
4,636
Rating
4.91
P
PrintablesDylan Kirby

ZK-1001U case enclosed back

amp housing for one ZK-1001U amp, designed to use 2 m3 heat-set inserts for mounting. run wires through the bottom opening of the housing. Then complete the connections to the amp, and slide the amp into the case with pulling slack out of…

Downloads
1,805
Likes
74
Rating
0
P
Printablesdhruv patel

3d printer encloser

update nov 2023 Free my models 3434692caa8da9f19a those who are having trouble finding id size they use slicer measuring tool extenstion to scale the stl up or down as per there required pipe fittings i did same for mine my pvc pipe were…

Downloads
1,639
Likes
619
Rating
5
P
PrintablesKytor

Kytor Industries Fully Enclosed Open Source Cartridge Reader Shell

This Fully Enclosed Open Source Cartridge Reader Shell (FEOS) is designed to be durable, well protected, and look stunning on your desk. The shell is a multi piece assembly, the shell base, the cover, battery and the faceplate. The “decoy…

Downloads
1,537
Likes
100
Rating
5
P
Printablesice987

Prusa CORE One/+ MMU3 Y-Splitter FESTO (compatible with Enclosed version)

I frequently change between MMU3 use and regular mode use. To avoid swapping tubes between MMU3 and regular use I created a Y-Splitter, which is compatible with the Prusa CORE One and the MMU3 Enclosed version. Since the length of the…

Downloads
1,012
Likes
324
Rating
4.86
P
Printablesensoniq2k

Fully enclosed MMU2 wheel buffer with screw holes and PTFE clamp

For my printer enclosure I needed something with screw holes so I added some. Also I designed a clamp for the PTFE tubes so they won't get sucked in. Just use a M3 10mm screw and a hex nut (there should be enough in the MMU2 spare parts…

Downloads
1,008
Likes
88
Rating
4.67
P
PrintablesPrusa Research

MMU3 Enclosed printable parts (for Core One)

All printable parts to convert your existing Original Prusa MMU3 (for MK4S) to Original Prusa MMU3 Enclosed (for Core One). Before you start printing please read the instructions carefully! You need to source additional parts listed in…

Downloads
990
Likes
205
Rating
4.33
P
PrintablesLeo Bottaro

Enclosed Toilet Paper Dispenser

This model is open source and available on OnShape, link here - I created it because I needed an enclosed TP dispenser, otherwise my menace of a cat would destroy all the TP rolls. All parts have a flat side that can be used to print…

Downloads
914
Likes
607
Rating
4.5
P
PrintablesDu_Sloth

Fidget Switch Enclosed

An enclosed version of the fidget switch.

Downloads
786
Likes
46
Rating
1
P
PrintablesHobo4ssassin

P1P Enclosed Sides: Pegboard Modplate

I really wanted to like the armor plates but the layer lines look terrible and it's hard to print without all sorts of issues. The pegboard plates look much nicer printed because the outer face has the bed texture and prints more easily…

Downloads
679
Likes
94
Rating
5
P
PrintablesSHaDoW6

K1 Max Enclosed Sliding Glass Lid

Hi all, I've been looking for a solution for my K1 Max's top. Taking it off, putting it on, the bloody thing should have come with Hinges or something. Anyway long story short, I looked all over the internet and couldn't find anything…

Downloads
584
Likes
113
Rating
4.67
P
PrintablesSoundDoc

LACK Attack #4: Enclose the Lack (aka Quiet The Lack Stack)

This is a followup to: Lack Attack#3: Koppla the Lack: https://www.prusaprinters.org/prints/15919-lack-attack-3-koppla-the-lack-aka-power-the-lack-s without further adieu.... Attack 4: ENCLOSE THE LACK Its been a while since my last…

Downloads
454
Likes
154
Rating
5
P
PrintablesHobo4ssassin

P1P Enclosed Sides: Armor Modplate

This model is not my design, I just added horizontal supports for more stable printing. As long as your printer can bridge you shouldn't need any vertical supports. I do not like the way the armor modplates look when printed, with the…

Downloads
432
Likes
49
Rating
4
P
PrintablesMlee

5.25 to 8 2.5 7mm hard drive ssd encloser adapter for NAS Server

Used a old DVD drive to model this. Hold 8 2.5" by 7mm drives and fit in 1 5.25 drive bay

Downloads
424
Likes
51
Rating
4
P
PrintablesWidget

More enclosed body for ratchet toothpaste squeezer

I really liked the toothpaste squeezer but found the body to be uncomfortable to hold and prone to cracking if squeezed too hard. This body is more enclosed, making it much stiffer and comfortable. It is also about 1mm taller for better…

Downloads
408
Likes
37
Rating
4.83
P
PrintablesErgomechStore

Sofle RGB Fully enclosed case

This is a case designed for the Sofle RGB split keyboard. The case consists of 1 upper body part and one flat bottom plate, the plate should be cut with clear acrylic or similar to let the LED shine through. You'll need the following…

Downloads
382
Likes
37
Rating
0
P
Printablesice987

Prusa CORE One/+ MMU3 Y-Splitter COLLET (compatible with Enclosed version)

I frequently change between MMU3 use and regular mode use. To avoid swapping tubes between MMU3 and regular use I created a Y-Splitter, which is compatible with the Prusa CORE One and the MMU3 Enclosed version. Since the length of the…

Downloads
363
Likes
77
Rating
4.91
P
Printablesheavily882

Slim Silakka54 tenting case with fully enclosed electronics

A fully enclosed tenting case for Silakka54 split keyboard. Fit nicely around the USB port and the jack connector, has slim edges. Keyboard is press fitted and the electronics cover is screwed from the bottom. Left side file provided,…

Downloads
320
Likes
14
Rating
0
P

Ikea Lack enclosed spool holder (1.0)

So Yosuke's filament guid e is awesome, but his spool holder does not work with the stock Lack connectors (his are thinner wall). He also presumes you will use the Bear 2020 Spool Holder which, okay, but that means you're buying two…

Downloads
315
Likes
64
Rating
4.89
P
PrintablesLane Davidson

Flash Forge Adventurer 5M encloser parts

These are the 3D printed parts for the adventure 5m DIY enclosers before printing make sure you bought the kit from amazon or other websites to get the class , screws, magnets, and other stuff.

Downloads
283
Likes
12
Rating
5
P
PrintablesKäsekuchen

Sliding Cover for Core One MMU3 Enclosed

ASSEMBLY: The shorter slides has to be on the outside. The longer one with the dot showing to the middle The rail has to be mounted in the cover while rotating it into the press fit. The big radius is the top. No screws or glue needed. In…

Downloads
269
Likes
82
Rating
4.85
P
PrintablesZneuzity

NFC RFID Tag Keychain case/holder – Enclosed Design (25mm insert)

This model is a functional protective case for standard circular NFC tags (stickers or discs up to 25mm in diameter). The keychain is designed for embedding the tag during the 3D printing process, ensuring it is fully sealed, waterproof,…

Downloads
238
Likes
23
Rating
5
P
Printablesthall72

Lego Compatible (2046.dat) Staircase 6 x 6 x 7.333 Enclosed Curved

This model is compatible with the lego system.

Downloads
209
Likes
31
Rating
0
P
Printablesflyntm

Tarmo5 Enclosed Gearbox - V2

My Tarmo5 gearbox was filling up with dirt and grass so I tried to close up some of the openings. My first version vibrated enough to loosen the motor screws. So I added a bearing and at the suggestion of “Liouma”, I added a flexible…

Downloads
206
Likes
42
Rating
5
P
PrintablesTritschi

Cable Clips Magnetic with Enclosed NeoDyms

Remix of the nice LTT Cable Management Clips. New: With enclosed NeoDym magnets. Thanks for this great design. Especially your aspect looks abslutely nice. I did not want to have the magnets exposed to run risk of falling out or messing…

Downloads
206
Likes
99
Rating
5
P
Printablesppak

Voron 2.4 Enclosed Z Chain Guide

Enclosed Z-Chain Guide Supports Z-Chain from both sides and keeps it from sliding around, especially for taller builds. Installation Requires: M5 x 10mm BHCS (Count 2) M5 x T-Nut (Count 2) Clearance: Clears conventional toolhead…

Downloads
204
Likes
37
Rating
5
P
Printablesthall72

Lego Compatible (4784.dat) Staircase 4 x 6 x 7.333 Enclosed Straight

This model is compatible with the lego system.

Downloads
199
Likes
39
Rating
0
P
Printablescamstone96

Print Encloser for Neptune 4 plus

I remixed this model in fusion to fit my Neptune 4 plus, I used some sound deadening foam for the walls but plan to use a different material in the future. The adjusted sizes should be labeled in each model stl file. I do apologize for…

Downloads
191
Likes
69
Rating
5
P
PrintablesPhil

Creality K1 Enclosed Hinged Lid Raiser

Lid raiser for the Creality K1. Features: Has a Bubble for the Cable Chain to move into when printing on the left side of the build plate. Hinges so the lid can be opened for printing PLA etc. Handle for living the K1 Lid Extended right…

Downloads
183
Likes
22
Rating
4
P
Printablesattenuendo

Hadley Enclosed Spider Cover

A modification of Gyoenastaader's useful spider cover with no hole over the spider collimation screws. Opening for the screws is about 34mm in diameter and extends up about 38mm before curving in. Printed with 0.4mm layer height with PLA…

Downloads
182
Likes
20
Rating
5
P
PrintablesWill

PTFE & Filament cutter Enclosed for use in schools etc

Here's my design for a filament / PTFE tube cutter. It has been designed to be enclosed inorder to keep fingers away from the blade. There are two designs one with a window so that you can see any marks you have made to cut to and one…

Downloads
176
Likes
25
Rating
3
P
Printablestimn

GoPro knob with enclosed M5 nut

Many models involving a GoPro mount use a screw embedded into a printed handle and then rely on a nut in the mount to screw in. Frank's Prusa Mk3s camera uses a different method which inspired this model here: embed a nut into the handle,…

Downloads
168
Likes
17
Rating
5
P
PrintablesGcodeGearHead

SV08 Top Hat (& Double Top Hat)- Enclosed for MMUs

SV08 Top Hat - Enclosed for MMU's ###### Please post your Makes ###### Please like this, download and post the make if you built it It helps us makers with feedback and gets us some Prusa meters as most people don't pay it forward Feel…

Downloads
160
Likes
38
Rating
5
P
PrintablesBojack Horseman

Filament Dust Cleaner Filter -Enclosed Magnets 6x3

Add a pause just before the roof of the Magnet enclosure top avoid gluing in the magnets.

Downloads
153
Likes
28
Rating
4.67
P
Printableskaje

Knob with Enclosed Hex Screw - 1/4 Inch and M6 Metric

[Note : If you use OctoPrint, see special note below.] This print will create a knob with an embedded ¼" X 1" or M6 x 25mm hex bolt. Bolts of different length can be used with a simple modification explained below. This print is the…

Downloads
153
Likes
31
Rating
5
P
Printablesboom23

Core One Enclosed MMU3 Sliding Cover for easy removal of the MMU3 top cover.

With these parts you can close the Enclosed MMU3 top cover opening while allowing for easy removal of the MMU3 top cover. The sliding cover helps in controlling of the Core One enclosure temperature, but I also wanted to be able to easily…

Downloads
149
Likes
37
Rating
4.86
P
PrintablesHeini Falk

P1P Heat Extractor Fan for Enclosed P1P

Details: I have created a heat extractor for a enclosed P1P that use an old Intel CPU fan (we all have one lying around) and added into the back of the P1P after cutting the frame off the CPU. This will then create a Exhaust effect…

Downloads
142
Likes
93
Rating
0
P
Printablesice987

Prusa CORE One/+ MMU3 Y-Splitter Prusa Fitting M5-4 (compatible with Enclosed version)

I frequently change between MMU3 use and regular mode use. To avoid swapping tubes between MMU3 and regular use I created a Y-Splitter, which is compatible with the Prusa CORE One/+ and the MMU3 Enclosed version. Since the length of the…

Downloads
121
Likes
44
Rating
5
P
Printablesspline72

The 100 printer - Enclosed Power Socket - low rear mount

Hi, have been working on a discrete power socket mount for the 100 v1.1. It has a fully enclosure in the rear and has a port to allow wires to run to the power supply. It is a 2 part construction that replaces the connector bar in the…

Downloads
120
Likes
16
Rating
5
P
Printables1D_Design

Snapmaker 2.0 filament guild (Work with the enclose)

(This is under revision due to several issues a newer version is on the way ) A simple filament guild for the Snapmaker 2.0 also works with the enclosed Hardwear needed M4 x 8mm (2X) Print Settings Printer: Snapmaker 2.0 Rafts: Doesn't…

Downloads
119
Likes
22
Rating
0
P
PrintablesRob Latour

Encloser for two 8 module Max7219 display boards (joined together)

This 3D printed enclosure (three parts: left, middle, right) holds two 8 module Max7219 display boards. Included are the .stl files and the Fusion 360 (source model) .fd3 file. It also requires a front piece of red acrylic plastic 1/8"…

Downloads
117
Likes
13
Rating
0
P
PrintablesSanka

(un)original drybox holder for Core One and MMU3 enclosed

Holder for use your (un)original drybox with you Core One with the MMU3 enclosed version. You still able to remove the lid. needed : 4 screws M3x8 4 screws M3x10 8 nuts M3

Downloads
114
Likes
43
Rating
5
P
PrintablesNutterflies

ID card holder | Heavy duty | Enclosed | Print In Place

For 86x54x3mm card Printed with PETG 15-20%infill supports recommended the hinge was made with 0.2mm tolerance (it works with PLA too) To break free the piece use flat surface and bend up the part with the hexagon in it.

Downloads
112
Likes
12
Rating
0
P
PrintablesOptix74

Enclosed Voron 2020 Extrusion Frame Camera Mount System Adapter

This mounting adapter allows clearance for the panels on enclosed Voron printers. It is a mashup of the “Articulating Raspberry Pi Camera Mount for Prusa MK3 and MK2 by Sneaks” system and the mount used by the “Removable Doors” mod by…

Downloads
109
Likes
16
Rating
5
P
PrintablesGeorgi

Prusa encloser filament holder NO filament guide

After bying a Fysetc Encloser for my Prusa MK4 I faced a problem with the engeneering decision for the spool holder. I didn't like the solution of Fysetc - a long PTFE tube, etc. etc. The original prusa spool holder could not be used, as…

Downloads
107
Likes
5
Rating
0
P
Printablesecheng

FasTrak Flex and Flex CAV suction-cup enclosed window mount

This is a sleek window mount for the FasTrak Flex and Flex CAV with protruding passenger-count wheel. It is designed to work with (qty 3) 0.8" mini clear suction cups . Remove the velcro tape from your toll tag and then push the tag all…

Downloads
106
Likes
5
Rating
0
P
PrintablesStopper

Wing Nut M3 with enclosed nut

Wing Nut M3 with enclosed nut, print stopped to place nut. I used a stop nut, but a normal nut should work as well.

Downloads
103
Likes
22
Rating
0
P
Printablesmotocoder

Enclosed IEC Power Inlet Cover for VCore-3 (3030 Extrusions)

I like the snap-in switched outlets like those used in Voron printers. I wanted something similar for my RatRig VCore-3 build, but I didn't find anything. So I modified the Voron power inlet to allow mounting to two 3030 extrusions. This…

Downloads
99
Likes
16
Rating
0
P
PrintablesBruno Serge

The Bambu Lab Poop Chute V2 (Enclosed)

So many downloads - not as many likes! If you find this useful please Like it and subscribe to my Printables profile ! Please also consider donating. V2 of Bambu Lab poop chute collector bucket with enclosed walls to keep heat in the…

Downloads
98
Likes
15
Rating
0
P
PrintablesInterlinkKnight

Bambu Lab Poop Chute Container Enclosed

The main feature is that it's enclosed to reduce the noise leaking out from the big hole on the back where the poop comes out. It has a tray attached to the printer with two screws (M3x12mm) so the container can be over it without any…

Downloads
96
Likes
10
Rating
5
P
Printables3DBirdy

Core One/MMU Enclosed Dust Filter

A simple dust filter for the Core One top vent I made because I have a lot of dust around, lol. You can customize the hole size by simply changing the infill % or type on the “Filter” Part in the .3mf files (I use 64% to get a more or…

Downloads
89
Likes
34
Rating
5
P
PrintablesByte Insight

Enclosed Electronics Case for Printers

This is a modular electronics case for 3d printers which I have used successfully for my Eryone Thinker (located underneath) and on the side of a Ender 5+ The attached model files provide the outer wall and any bases required. In addition…

Downloads
87
Likes
28
Rating
5
P
PrintablesChad Baker

3DO Nozzle cam board case + Enclosed 25x25x7mm fan on SB PCB Door

Modified Stealthburner toolhead board cover with 25x25x7mm enclosed fan and a place to mount the PCB for the 3DO Nozzle Camera.

Downloads
87
Likes
9
Rating
0
P
Printablesdb

Core One Enclosed MMU3 UltiMulti Legs

Legs to mount the UltiMulti unit to the enclosed CoreONE. Mount using M3 screws.

Downloads
82
Likes
16
Rating
4.6
P
Printableswerkstrom

Minimalistic encloseure for newer Shelly line of products V1.1

An “as small as possible” enclosure for the Shelly line of products. All holes are 2,5 mm and are all the way through so they can be used to attach the enclosure to something as well as keeping the lid in place. This is a slight update…

Downloads
80
Likes
12
Rating
0
P
Printablesdmarting

Creality Ender-3 PSU Cover with Enclosed Sonoff Basic R3

This is a 3D printable PSU cover for the Creality Ender-3 to also contains a Sonoff Basic R3 to command the power by WiFi. A good option is to flash the Sonoff to use Tasmota instead of the native software. Then you can shutdown the…

Downloads
77
Likes
11
Rating
0
P
PrintablesxXSMOGXx

Bambu Lab P1P- Vision Encloser Side Top/Down Open mod

don't really have much to say about it, it fits exactly like the original part, only that you can close it completely at the bottom like the original or open it for a good air flow I don't know yet if this will be the final version, but…

Downloads
72
Likes
20
Rating
0
P
PrintablesJung Gun Ahn

Filamentalist Encloser & Dryer

The structure is made with 2020 aluminum profiles and polycarbonate panels , making it a cost-effective alternative to a typical four-slot filament dryer .

Downloads
71
Likes
42
Rating
0
P
Printableswhoppingpochard

Triple-Z axis, fully enclosed BLV MGN cube mod

Note: Links to files and ongoing updates I'll eventually be uploading a 'finished' version of the files here to Thingiverse, but in the meantime please see my Github repository for parts files and models, and my build thread on the Duet…

Downloads
71
Likes
17
Rating
0
P
PrintablesBonzo

No Battery Variants - Kytor Industries Fully Enclosed Open Source Cartridge Reader Shell

Battery-less variants available for purchase at my shop if you're interested: https://bonzosretro.shop/products/3d-print-sanni-open-source-cart-reader?variant=45933636976918

Downloads
71
Likes
2
Rating
0
P
PrintablesMadRajib

CrowPanel ESP32 2.8 Display Encloser

CrowPanel ESP32 2.8 Display Encloser Use M3x6mm for display Encloser Use M4x5mm for display holder with 2020 extrusion Firmware: https://github.com/MadRajib/CYD-Klipper-CrowPanel

Downloads
69
Likes
12
Rating
0
P
Printableszwn.a

Sweep Bling MX Enclosed Case

Description This case is for Sweep Bling MX keyboard . Tested working for DSA and XDA keycap profile. BOM For the full build you'll need 8x M2: 6mm screws Building Instructions For the bottom part, you will need to print it bottom side…

Downloads
69
Likes
4
Rating
0
P
PrintablesBri0nac

Small Tray Options for Ikea Lack Encloser

While Forker45's Clip-On Tool Caddy for Ikea Lack Enclosure fits all of the original tool needs, it was still missing the one tool I use the most… a filament cutting tool. So I did a quick modification in tinkercad and here we are. The…

Downloads
68
Likes
44
Rating
5
P
PrintablesGeneralCuster

Nintendo Switch Enclosed Joycon grip and strap holder

This joycon strap and grip holder can be used with 4 straps and 2 grips. It is a remix of MaOI's original model which can be found here: https://www.printables.com/model/55448-nintendo-switch-dual-joy-con-grip-and-strap-holder I've…

Downloads
67
Likes
15
Rating
5
P
PrintablesBri0nac

Lack Encloser Locking Pin Standoff

Created to secure the addition lack table for my encloser. Based on other printed and modified in tinkercad. Printed in PLA for a precision tight fit.

Downloads
66
Likes
20
Rating
0
P
PrintablesCND.CLS

Rook 2020 MK1 enclose "Mod"

!Please read to the end! I'm continuing to work on upgrades for the printer. Updates will come if interest is there. There are two doors in the front to easily get to the Buildplate. The Top panel is removable with magnets [Printing Pla…

Downloads
62
Likes
38
Rating
0
P
Printables50an6xy06r6n

Bambu Lab X1/P1 Magnetic Diaper (Enclosed Poop Chute)

I needed a container to catch the purge “poops” that come out the back of my X1C so my cats don't try to eat them. Most of the models for catching poop I found have an open top, so the cats could still get into them if sufficiently…

Downloads
59
Likes
7
Rating
0
P
Printablesomaenogyudon

Slim AirTag - Enclosed Design

Remix of JTEE3D's design: https://www.printables.com/model/555966-slim-airtag Battery and wires are now enclosed with a two-part housing so that they aren't exposed. Uses a CR2025 battery. The thinner, somewhat smaller battery was needed…

Downloads
58
Likes
4
Rating
0
P
Printablescoredump

Sofle RGB plus tps43 enclosed case remix

If you are not using the tps module, mirroring the left side should work fine. Same if you are using the tps module on the left side. Printed with the top of the case facing down the plate, supports for the tps cut and some of the holes…

Downloads
57
Likes
8
Rating
0
P
PrintablesElectric Pi

Qidi Q2 Enclosed Poop Bucket

Poop bucket for Qidi Q2 that is fully enclosed to reduce fumes when printing materials like ABS. it is not air tight (neither is the rest of the printer enclosure), but when used with the exhaust fan (and in my setup an in line booster…

Downloads
57
Likes
7
Rating
4
P
PrintablesRhiz0Matics

Qidi Plus4 Toolhead Cover for Peltier cooling 95% fully enclosed

Want to keep your toolhead cooler than the chamber? use peltier cooling! now with 95% enclosed toolhead! Why are you here? why are you doing this? do you know what you're doing? what if your machine breaks? what if you start a fire? are…

Downloads
56
Likes
12
Rating
0

TwoTrees TS3 Enclosed Laser Engraver stock ducting to 120mm fan and 4" ducting

This is the ducting adapter I used in my TwoTress TS3 Enclosed Laser Engraver video, it allows you to connect the stock 6mm ducting to another 120mm fan and 4" ducting to exhaust the smoke. Category: Parts

Downloads
56
Likes
5
Rating
0
P
PrintablesDeimosfr

Coreboxx PTFE Guide – Airflow Cutoff for Enclosed Printing

The Coreboxx comes with a top panel that allows air to escape from the CoreOne. While this design works fine in general, it is not ideal for filaments that require a stable heated chamber (such as ABS, ASA, or Nylon). To solve this, I’ve…

Downloads
55
Likes
14
Rating
3
P
PrintablesEge Hosgungor

Split Flap Display - (3D Printed, Modular, Compact & Enclosed, With Web Interface, Optimized for PrusaSlicer WITHOUT MMU)

Here lies the instructions to build, assemble and program a compact, modular and fully enclosed 3D printed split flap display.

Downloads
53
Likes
20
Rating
0
P
PrintablesWarlogh

Enclosed Filament Holder

After I made a Lightweight Spool Holder (Which one I like quite a lot) I decided to make another one which will not have one downside of any open like holder. And it is a dust protection. So here is Enclosed one, dustproof. Of course it…

Downloads
53
Likes
16
Rating
0
P
Printablesthenickdude

GoPro knob (bolt fully enclosed)

This is a replacement for the standard knob/thumbscrew found on GoPro mounts that has 3/4" (19mm) of shaft exposed. This design uses a trick to embed the bolt fully into the knob (the top of the knob is closed over, you can no longer see…

Downloads
52
Likes
14
Rating
0
P
PrintablesNonoobybut

CORE ONE + MMU3 chamber vent enclosed version automatic upgrade

Update: works with Firmware Version 6.5.3, my impression is the autovent works a little smoother now. The testfile has to be renamed to .gcode and works for the CoreOne+ but is your own responsibility. The stock top cover of the enclosed…

Downloads
52
Likes
13
Rating
4.5
P
PrintablesNoclafasm

Enclosed ZimaBlade NAS case 2x3.5" HDD (designed for PoE adapter)

Requirements: 80mm fan (designed for Noctua NF-A8 PWM ) JST GH 1.25mm 4pin male -> fan adapter (you will probably have to improve and create your own) 2x5.7mm M3 heat inserts (designed for CNC kitchen M3 x 5.7 , but deeper or shallower…

Downloads
52
Likes
7
Rating
0
P
PrintablesCollisto

Enclosed Tractor Trailer Whistle

Van Version of truck whistle. Whistle adapted from https://www.thingiverse.com/thing:77183

Downloads
49
Likes
13
Rating
0
P
PrintablesJeremy H

Filament Holder for Lack Encloser

I don't like the lack filament holder that I printed with the lack table encloser. I decided to design this and it works better. My main problem is the design that came with the instructions for the lack table makes a horrible noise when…

Downloads
49
Likes
3
Rating
0
P
PrintablesKimorin

Framework Laptop Expansion Card Hinged Case - Enclosed Magnets

remix of https://www.printables.com/model/920539-framework-laptop-expansion-card-hinged-case just enclosed the magnets

Downloads
46
Likes
10
Rating
0
P
Printableswerkstrom

Minimalistic encloseure for newer Shelly line of products

An “as small as possible” enclosure for the Shelly line of products. All holes are 2,5 mm and are all the way through so they can be used to attach the enclosure to something as well as keeping the lid in place.

Downloads
46
Likes
7
Rating
5
P
PrintablesAustinCreates

Fitech Handheld Encloser And S10 (1st Gen) Steering column mount.

* PRINT WITH PETG* This mount securely holds the FiTech handheld controller right on top of the steering column, giving you a convenient viewing position for monitoring your engine while driving. It uses four M4 screws and two M4 nuts…

Downloads
45
Likes
4
Rating
0
P
Printablesgreecher

Ryobi Battery Mount Enclosed remix

I liked and use the original, but for the larger batteries, as I am mounting them on a side of a table, I wanted to mount them with the battery indicator up, instead of the normal mounting down. As this was the case, I enclosed the open…

Downloads
45
Likes
7
Rating
0
P
PrintablesTeachingTech

Ender 5 enclosed lid and handle

I have fully enclosed my Ender 5, using a combination of 3 mm acrylic panels, 2020 V-slot extrusion and printed parts. This thing contains instructions and parts to achieve this, along with the companion video:…

Downloads
44
Likes
12
Rating
0
P
PrintablesGcodeGearHead

SV08 Max Top Hat Enclosed for MMUs

SV08 Max Top Hat - Enclosed for MMU's ###### Please post your Makes ###### Please like this, download and post the make if you built it It helps us makers with feedback and gets us some Prusa meters as most people don't pay it forward…

Downloads
42
Likes
10
Rating
0
P
PrintablesGleb Nikiforov

Ikea Skadis mount for 2 enclosed drives (HDD/SSD)

The model allows to mount two enclosed 2.5" drives (HDD/SSD) on Ikea Skadis board. Designed for the UGREEN USB 3.1 Hard Dririve Enclosure. https://www.amazon.nl/-/en/dp/B07D2BHVBD

Downloads
42
Likes
6
Rating
4
P
PrintablesChamp 1800

Water cooling radiator mount for V-Core 3.1 enclosed

I decided to water cool my whole printer so I remixed the original file to fit over the trim pieces nicely & it uses 3 existing fixing screws. You do not have to work about losing the T-nuts down the profile either. It is fairly slim &…

Downloads
41
Likes
7
Rating
0
P
PrintablesMyParkLab

Modern Luxury Villa - Cantilever Balcony & Enclosed Yard

A detailed 3D model of a high-end contemporary residence featuring strong geometric volumes, a prominent upper-floor cantilever frame, and extensive glass openings. The layout includes a covered carport structure, integrated perimeter…

Downloads
41
Likes
7
Rating
0
P
Printablesjonspaceharper

SUAFT - An AC & HEPA Filter for Enclosed Printing

SUAFT: Still Unnamed Air Filter Thing SUAFT is a combination activated carbon and HEPA filter for 3D printing. It uses 75x30mm radial fans to draw air first through a pair of activated carbon packs and then through a HEPA filter. This…

Downloads
41
Likes
22
Rating
0
P
Printablesre1neke

Fully enclosed EBB36 mount and cover for the Galileo2 SA extruder

I really like and appreciate the models of JR Lomas and wanted to use them in my printer, but I found out that the lack of bottom mountings makes my toolhead unstable and shaky. That's why I designed my own mount, which is fully…

Downloads
40
Likes
2
Rating
0
P
PrintablesVectoforge

RatRig Vcore 3.1 Enclosed LED Brackets

This are some brackets for a common kind of led strip that i can find locally , this bases are very versatile you can place one in different positions inside the machine to suit your needs The brackets have a cable routing channel to…

Downloads
40
Likes
13
Rating
0
P
PrintablesDita Tenglerova

ESP32 Cam TOP Case for Encloser Corner Montage

I changed the Top Case of Michael Fanta to have the ESP Cams as Corner Cams. ESP32_Cam_Case_Top_Part.stl Original Model I use two M3 heat inserts to assemble it to the Encloser Corners. The 02 Version i use for the Front Left Corner the…

Downloads
39
Likes
13
Rating
5
P
PrintablesWrath

SV08 Top Cooling Kit - Solid Enclosed

Print: 2 x Solid Long 1 x Solid Short 1 x Top Hat Sensor Mount The top hat sensor mount goes in the back right corner and is the same size as one of the short sections.

Downloads
39
Likes
10
Rating
1
P
Printablesjoncruz

Enclosed Planetary Embroidery Floss Bobbin Winder

Description This is a 'simple' (for assembly and use, at least) winder for embroider floss with a 4.421 : 1 ratio. That means that one crank of the handle gets you almost four and a half turns of the bobbin winding up your thread or…

Downloads
39
Likes
18
Rating
0
P
PrintablesJohn Townsend

Enclosed Classic Labyrinth Earrings/Pendant

Enclosed classic labyrinth design for earrings or pendant. Category: Earrings

Downloads
39
Likes
12
Rating
0
P
PrintablesChickenX

Bambu P1S Poop Chute + Enclosed/Removeable Bottom

This is an excuse for me to mess around. This is my 4th design… ever. I know I have a lot to learn. Got a printer in December '23 and have been mostly printing STL's. Upgraded printers and started designing during April '24. Parts…

Downloads
36
Likes
3
Rating
0

a very basic encloser

can be maid to fit many printers if you need to edit to useing onshpe i can provide the link

Downloads
35
Likes
10
Rating
0
P
Printableskickihn_

NTAG Teardrop fully enclosed

for NTAG or other NFC/RFID sticker with 26mm diameter space

Downloads
35
Likes
1
Rating
0