Search results: eris

Sort order

279 models

P
PrintablesJan

Peristaltic Pump (simple & working) for an automated fertilizer

Plants need fertilizer. Manual dosing kept me doing to much or too little with results accordingly. The pumps feed liquid fertilizer into the irrigation system while watering. Dosing can be adjusted on a very wide range. A lot of…

Downloads
399
Likes
98
Rating
4.5
P

Cabbage Moth Butterfly Scarecrow Decoy (Pieris rapae)

Meet your new butterfly army. Print this guy out and then print some more (he'd appreciate a few friends), suspend them above your precious vegetables and they will protect them from the scourge of the evil caterpillar horde. Learn about…

Downloads
287
Likes
27
Rating
5
P
PrintablesSDA

Wall mount for loudspeaker PreSonus Eris 3.5 Gen 2

The set consists of a wall mount and a rotating mounting plate for attaching a PreSonus Eris 3.5 Gen 2 loudspeaker. The mounting plate is designed to use as little material as possible while still ensuring that the loudspeaker is securely…

Downloads
73
Likes
12
Rating
5
P
Printablesiczfirz

FIFA World Cup Trophy (No Infill Verison)

This is a further remix for noinfill. I printed it with 2walls only. Here you go the timelapse. Don't forget to subscribe my YouTube channel.

Downloads
10,519
Likes
565
Rating
4.89

V2 -- Nema 17 Peristaltic Pump / Water Pump / measuring Pump

🌀 Peristaltic Pump (NEMA 17) This is a compact, fully 3D-printable peristaltic pump designed to be driven by a NEMA 17 stepper motor . The pump uses standard 608 bearings and soft tubing, making it easy to build with commonly available…

Downloads
1,895
Likes
1,488
Rating
3.83
P
PrintablesJohn Phillips

Parameterised Under Desk Cable Management Tray

A fully parameterised cable management tray / cable holder for mounting under a desk. Includes screw holes or you can attach it using double sided tape. 40 and 75mm wide versions included (both 100mm long) along with the 3mf file if you…

Downloads
1,029
Likes
120
Rating
4.75

V1 -- Nema 17 Peristaltic Pump / Water Pump / measuring Pump

Version 2 out now in a remix ---> All you need is a Nema 17 motor, 4 x 608 bearings and some 8mm plastic Tubing (Soft tube needed). You will also need some 16mm M3 screws to attach the pump assembly to the stepper motor. Of course the…

Downloads
1,018
Likes
422
Rating
4.2
P
PrintablesH3dSprint

Peristaltic pump - nominal diameter Ø8mm - for fluids like cooling water, water, engine oil and other similar

All designed parts of the peristaltic pump are printed out of PETG. For the hose I have choosen silicon to avoid high forces by rotating the impeller. The hexagon shaft where the impeller is put-on have two interfaces, on one side an…

Downloads
1,011
Likes
236
Rating
4
P
PrintablesTate S

Drill Powered Peristaltic Pump, Gear Oil Transfer Pump

Pumping gear oil by hand is frustrating, use this instead! Chose a quality “engineering” material for best results. I used a Saturn 3 resin printer with Siraya Tech Blu Tough, in Easy Grey. Some tolerances are relatively tight, I highly…

Downloads
932
Likes
429
Rating
5
P
PrintablesDaniel

Mini peristaltic pump for 28BYJ-48 stepper motor

This is a 3D printable model for a peristaltic (aka hose) pump for either 3mm or 4mm silicone hoses operated with the popular and cheap 28BYJ-48 stepper motor. The motor is usually sold with a fitting driver shield and there are various…

Downloads
838
Likes
124
Rating
4
P
PrintablesGosga365

Cherish Ball Nintendo Switch Game Holder

A Nintendo Switch game cart holder. Designed for all the colored parts to be printed separately. If anyone wants to give it a shot in the MMU2, let me know and I can revise the files to align properly for that. Print instructions Print…

Downloads
559
Likes
124
Rating
3.33
P
PrintablesHaru_Creavita

Robot Hero - Animal Crossing Serise

Model Name : Robot Hero - Animal Crossing Serise Size : 190 mm Level : ★★★☆☆ Color Required : White, Black, Red, Yellow, Dark Gray, Silver, Cyan Designer : @Bread_Ryu 1) This model is based on an FDM 3D printer that must support TPU…

Downloads
548
Likes
294
Rating
0
P
PrintablesUppfinnarAXEL

Peristaltic Pump Simple

3d print a simple waterpump! This is a peristaltic waterpump with high pressure and low waterflow. I used it in a small automatic greenhouse where it connected to a spray nozzle. Hardware required: Yellow TT-motor (ideally low rpm and…

Downloads
530
Likes
72
Rating
4
P

Mirror of Erised picture frame, Harry Potter (no supports)

We revamped our Harry Potter Mirror of Erised, now its a beautiful picture frame that prints with no supports. Just in time for the holidays, hope you enjoy them as much as we have & all those we have already given them out to as gifts…

Downloads
517
Likes
131
Rating
4.75
P
PrintablesShane

Peristaltic Pump

This is a simple peristaltic pump I designed. It uses a 755 motor and 608 bearings that fits 3.2mm Bore Size Silicone tubing. The motor is mounted into the rear of the frame using M4 screws, The bearings and bearing mounts are friction…

Downloads
464
Likes
101
Rating
0
P
PrintablesZRNNN

Peristaltic Pump _ Nema 17 _ 608 Bearings

as i only had 608 ball bearings, i created my own peristaltic pump. It is to be used for dosing fertilizer solutions in the hydroponics sector, but will certainly also work in other areas. - All the screws required are M3. - The silicone…

Downloads
391
Likes
41
Rating
0
P
Printablesxanoy

Periscope UA

Hi! We are from Ukraine!!! This is a low cost periscope for the Ukrainian army by Ukraine, to help Ukrainian soldiers. If you can and want to help us to print models for this device, please contact me (agree on quantity/time/delivery)!!!…

Downloads
368
Likes
95
Rating
5
P
Printablesmisan

Yet another peristaltic pump

To use together with a geared Nema17 stepper motor with a flanged 8mm output shaft like this one http://2.wlimg.com/product\_images/bc-full/dir\_37/1091420/geared-stepper-motor-1392929.jpg I am using 10mm OD surgical tubing. Action video…

Downloads
338
Likes
28
Rating
0
P
Printablestracejm

Low Profile Ceiling Register Air Deflector (F360 Parameterised)

A simple, low profile cover for a ceiling mounted HVAC register. Fusion 360 file (.f3d) provided so you can adjust parameters if required for your specific register. Model prints in two pieces if you only need one side; two pieces also…

Downloads
316
Likes
44
Rating
5
P
Printablesjpoles1

GrowFlow - NEMA 17 Peristaltic Pump

BOM: Note: incomplete, haven't had time to check exact fastener lengths: Bearing Assembly (Non-Print in Place Version): 1x M3 bolt + nut 3x M4 bolts + nuts 3x Needle Roller Bearings (4mm Bore Dia, 8mm OD, 8mm Width) Other: Silicone Tubing…

Downloads
311
Likes
67
Rating
3.5
P
PrintablesKilberisch

Parameterised Lista Trays

First of all, props to Lista optimized part trays von Marcel van der Boom which helped to inspire this Remix! The original model is a great solution for implementing a copy of the original trays sold for the Lista cabinets. I was missing…

Downloads
298
Likes
24
Rating
5
P
Printablesmilks

Glueless mini peristaltic pump

Based on off_grid_craft's design ( https://www.thingiverse.com/thing:3445927 ). These motors are small and cheap and will stall if the pump is run too fast. Produces a very slow, precise and reliable flow rate. I have mine operated by an…

Downloads
295
Likes
68
Rating
5
P
PrintablesiRaiFx

Honda Fuse Puller (Long verison)

I liked the Original design but i found out that it was short for my liking, so i extended it little bit and made the bottom flat so i don't use support or deal with overhangs. All right goes to Chienline for the Original design Category:…

Downloads
289
Likes
22
Rating
0
P
PrintablesJoerg_H

Speaker Stand for Monitor Speakers (here: PreSonus Eris E3.5)

Speaker Stand for Monitor Speakers The Problem: if Monitor Speakers sit flat on a tabletop, the sound is not directed towards the ears. My Solution: incline the speakers upwards so that they are pointing straight towards the head of the…

Downloads
270
Likes
50
Rating
5
P
PrintablesMr. Freeman

Emax Aeris 915 MHz TX Micro

Це приблизна модель модуля передавача Emax Aeris 915 МГц. Це допоможе зрозуміти приблизні розміри і на їх основі змоделювати аксесуари для спільної роботи з цим модулем.

Downloads
243
Likes
7
Rating
5
P
Printablesyoyothechicken

Pokeball Cherish Ball

A Cherish Ball, based on my original pokeball model. This model is listed as a remix because due to the new ring geometry and alignment pin locations, these lid and ring parts are not compatible with the originals. Misc. Info: The…

Downloads
235
Likes
47
Rating
5
P
PrintablesFy@TOWILab

Peristall-Wasserpumpe

Was man zum Zusammenbauen benötigt: Silikonschlauch (2mm innen und 4mm außen minimal 10cm) 4x Schrauben m3x20 3x Schrauben m2x12 3x Kugellager (11x4x4) Nema 17 Schrittmotor Kabelbinder gedruckten Teile Zusammenbau: Das Teil namens “Main”…

Downloads
230
Likes
24
Rating
0
P
PrintablesRich Thompson

3DVeristan Face Shield - Midsouth Makers Focus Version

This is the 3DVeristan Face Shield that Midsouth Makers is printing for local medical professionals. If a later version arrives we will update this repository after validating. If you are not working with Midsouth Makers, please don't…

Downloads
211
Likes
0
Rating
5
P
PrintablesFabmaszter

The Gallerist Organizer (incl. expansions)

This is an insert for the boardgame The Gallerist and based on the great design by tvkili! I used most of his base measurements and adapted the boxes to fit everything including the KS expansion stuff. The boxes also fit into the wells so…

Downloads
211
Likes
29
Rating
3.5
P
PrintablesMartin

Kids periscope

0,2 mm, no supports, 3 perimeters for more rigidity. Don't forget to mirror STLs for opposite handle before print. Remove built-in supports from body_L and body_R. You need 2 pcs of mirror: 50x50 mm thickness 3 mm. For example:…

Downloads
209
Likes
115
Rating
5

Presonus ERIS E5 Studio Monitor Stand

Hi! I've edited the original model to fit a bigger E5 version of Presonus speakers. There is also a smaller version if you want to. 0.20 Layer, 20% Infill, No supports, no brim,

Downloads
197
Likes
16
Rating
0
P
PrintablesMathew Lee

Gridfinity stackable base/lid combo (parameterisable)

Tested with PLA/PETG 0.4mm nozzle - use whatever works for your gridfinity prints. I've included a small range of sizes, anything else, open up the f3d file and edit the parameters nx and ny to change the grid.

Downloads
189
Likes
22
Rating
0
P
PrintablesLapjoint

"Feverish" Hook Boomerang

Hook shaped boomerang with a certain Boomerang Fever vibe. Flies a nice big circle. The first one I made so far felt a little heavy and required a pretty hard throw, so I added a widened version. There is a considerable difference between…

Downloads
176
Likes
7
Rating
5

Peristaltic Pump mount

A din rail mount for a Peristaltic Pump. The pump we used: https://a.co/d/fWMLnrs You will need to print two tabs for this design. They can be found at: https://www.thingiverse.com/thing:3401942 or…

Downloads
164
Likes
25
Rating
5

Periscope

Help support my design work by visiting my referral links: Upland referral (virtual property trading game): https://r.upland.me/qk9X Unstoppable Domains referral: https://unstoppabledomains.com/r/cc353d5f40d64e8 Visit my website:…

Downloads
161
Likes
28
Rating
0
P
Printablesmadeinoz

Small Parts Box - Parameterised (f360)

This is a parameterised (Fusion 360) small parts organisation box that can be customised to your needs and is based on the Assortment System Box by @chappel https://www.thingiverse.com/thing:4160638 I needed a flexible design that would…

Downloads
161
Likes
46
Rating
3

R2D2 Periscope Lift System

Retro Realistic Hobbies YouTube Channel https://www.youtube.com/@retrorealistichobbies I have been looking for a R2D2 Periscope lifting system that works for a while now and could never get any of the ones I have found to work correctly.…

Downloads
159
Likes
20
Rating
0
P
Printables3DWP

Goddess Taweret (Thoueris) Sculpture

This is a 3D scan of a Tawaret sculpture, I used plane cut for a flat base and oriented it upright. It's from the Harvard Museum of the Ancient Near East, more info: Faience Egypt (Thebes, tomb 34). Late Period, c. 664 - 332 BC Purchased…

Downloads
156
Likes
39
Rating
5
P
PrintablesMSBstudios

WaveRise pen organizer

the WaveRise pen organizer is a basic to print sturdy organizer featuring two smaller compartments for pens, pencils and markers, with the larger compartment perfect for larger items such as scissors, calculator, and pretty much…

Downloads
155
Likes
28
Rating
0
P
PrintablesMichel

Nema 17 Peristaltic Pump-608 Bearings-cooling water-engine oil-water

Parts: printed parts (see .stl) 5x 608 bearing hose silicon hose Ø6/4mm | length: min. 1m recommended fixing elements 3x cylinder screw M4x25 2x cylinder screw M4x15 5x hexagon nut M4 4x M3x10 Printing: Material PLA Infill 25% infill…

Downloads
153
Likes
17
Rating
4
P
PrintablesMscottie

The Gallerist (Kickstarter Bundle) insert

NOTE: You will need a printer that can print at least 221mm in the X or Y direction to successfully make this insert. 2025-04-24 Update Another minor tweak, this time to player_box_x4.3mf / .stl , to make the pawn and meeple slots…

Downloads
141
Likes
28
Rating
5
P
PrintablesVinc01

Remote control protection box for "Verisure"

Which “Verisure” alarm remote control user has not made a mistake with their remote control? the original box having buttons that are too flush with the box, it often happens that when storing the remote control in a bag, for example, a…

Downloads
140
Likes
5
Rating
0
P
Printablesstraiki

PreSonus Eris 3.5 speaker stand

This 3D model is a custom-designed stand for the PreSonus Eris 3.5 speaker. It features an elevated structure that raises the speaker off the table, angling it for optimal sound projection and listener ergonomics. The stand also provides…

Downloads
138
Likes
18
Rating
0
P
Printablessh

Simple periscope for kids and other usage.

Info: simple periscope you need mirrors the plate for mirror is 4.5*6.2cm it is a remix for nice UA periscope by xanoy (thanks) i have adjusted original model size (little bit smaller) and added a tube for given size you can scale tube on…

Downloads
134
Likes
30
Rating
0
P
PrintablesFloatingBoater

Wheelchair / Walker ramps for carpet doorway threshold (parameterised)

Carpet and lino have very different thickness, so doorways use a carpet gripper to create a neat join. Unfortunately, this creates a ~12mm barrier that hinders the small wheels of a walker or light wheelchair. This design is a simple ramp…

Downloads
133
Likes
42
Rating
0
P
PrintablesDalama

Laboratory Peristaltic Pump

This is a nice little precision pump and controller combination. It can dispense 100 ml/min at 300 rpm. I set the output to 1 amp and use 16 micro steps (set dip switches to 16 and F09 to 160). I use working mode 3 (F01 to P03) and a low…

Downloads
125
Likes
39
Rating
0
P
PrintablesKisssys

Peristaltic pump

This peristaltic pump has been made as small as possible to inject small quatities of test solution on command. It has been tested with this tubing.…

Downloads
119
Likes
35
Rating
0
P
PrintablesKiven

Parametric Peristaltic Pump With Mount

It prints as a single piece. The only non-printed part is the tubing. can be driven with a standard nut driver bit or a ¼ hex key this is a remix of this Parametric Peristaltic Pump which is a remix of this Gear Bearing

Downloads
118
Likes
13
Rating
5
P
PrintablesParker

DC Peristaltic Pump

I made this peristaltic pump to test water cooled parts, it uses 11, M3 screws, 3 small bearings, silicon tube, 1 DC motor and 3d printed parts. It can pump about 22 mL of water per second with a 4S battery. Motor (I used 12V 550rpm) -…

Downloads
118
Likes
14
Rating
0
P
PrintablesMalcolm

Peristaltic Pump - Variable Speed - Toggle on/off - Arduino & Easy Stepper

Developed for my PhD work. This is a peristaltic pump driven by a Nema-17 or alike motor using an Arduino (nano or alike) and EasyDriver. Files for the wiring layout and Arduino code are included. There is also a table that contains the…

Downloads
115
Likes
23
Rating
0
P
Printableshbfs

Laowa 24 Probe lens Periscope

Laowa 24 Probe lens Periscope, Gcode with support and some reinforcement case. Close the Periscope with a 20mm long and 3mm screw, heat an insert at the opposit side. Edit, V2 with better design and adjusted the mirror surface.

Downloads
113
Likes
9
Rating
0
P

Peristaltic Pump

This is a peristaltic pump designed around 4/6 mm silicone tubing and driven by a JK42HS48-1204 stepper motor. I printed the parts in PLA for testing — works fine so far, but long-term durability hasn’t been checked yet. BOM The model…

Downloads
112
Likes
14
Rating
0
P
PrintablesJohn Phillips

Raz's Desk Organizer - Shelf Remix - Fully Parameterised

A remix of the shelf for the excellent Raz's Desk Organizer design. I printed the original design, but I could not assemble it as the overhangs did not print properly, and there is no orientation which would avoid problematic…

Downloads
111
Likes
25
Rating
4

PreSonus Eris E3.5 wedge base

Angled base for PreSonus Eris E3.5 speakers. Measures 130mm wide, and 147mm deep, with a 40mm incline in the front and a small lip in the back to prevent the speaker from sliding. Cutouts in the version with holes are 25mm in diameter and…

Downloads
109
Likes
14
Rating
5
P
PrintablesWHerzog

Peristaltic Pump for NEMA17

This pump is a perfect project to reuse the NEMA17 stepper motors from an old 3D printer like ender3, prusa MK2 etc. IMPORTANT: All parts should be printed using PETG or ASA, especially if you run the pump of longer intervals. Using PLA…

Downloads
103
Likes
18
Rating
0
P
PrintablesGeorgeRaven

Parameterisable 1U Rackmount System

This parameterisable system is still a work in progress. Print Settings Matrix Part Infill Perimeters Infill Pattern Front Plate 5 2 Insignificant Back Plate 5 2 Insignificant Mount Left* 15 4 3D Honeycomb Mount Right* 15 4 3D Honeycomb…

Downloads
100
Likes
29
Rating
0
P
Printableskozmickid

Periscope

This was inspired by https://www.thingiverse.com/thing:1027744 This is designed for the mirror shown in the photo and available here: https://www.amazon.com/gp/product/B000RZQI68/ If you don't use this mirror, you may have to use a…

Downloads
100
Likes
12
Rating
0
P
PrintablesNewMakeIt

Peristaltic Pump

This is a complete re-engineering of the excellent design of Ralf's Perstaltic pump. I printed his pump and built it to his specs, but I found that the small stepper motors would not really run the pump consistently or with enough power.…

Downloads
97
Likes
30
Rating
0
P
PrintablesEebel

Chopper Advanced Periscope

This updated periscope module for Chopper is required to use the Advanced Head arms.

Downloads
97
Likes
13
Rating
5
P
Printableskrisztian96

W5 Glass Wipes Holder LIDL (Updated, fits current verison.)

I have fixed it, they have changed it like 3 times since i designed this, why they do this to me? I use this kind of glass cleaners. I did not like the box sitting on my table. It was ugly. So i designed a holder for it. RED one is PETG.…

Downloads
95
Likes
23
Rating
4.75
P
PrintablesMaxT

Low-Poly Heart for Valentine's Day - perfect gift for your partner, mom, or someone else you cherish in your life

https://www.buymeacoffee.com/maxt ---------------------- 4 versions in one package: Heart with no holes at all Heart including a hole to hang it, or scale it down and use as a pendant Heart including a place for the arrow Bonus: first 2…

Downloads
93
Likes
16
Rating
5
P
PrintablesMadeinSwabia

Bayerisch-Schwäbische Brezel

Hello friends from all over the world :) This is a piece of art. Handmade in a craft bakery. By the way, there are several types of "Brezen”. This is the “bayerisch-schwäbische Brezel” You can find it in Schwaben, in the west of Bavaria…

Downloads
93
Likes
2
Rating
0
P
Printablestom

Marking aid for spirit level parameterisable - Markierhilfe für Wasserwaage parametrierbar

For English scroll down. Wer kennt das nicht? Das Anzeichnen von Löchern mit einer Wasserwaage ist nicht unmöglich, aber oft etwas umständlich. Aber mit diesem Modell wird es zum Kinderspiel. Die beiden Teile werden auf der Wasserwaage…

Downloads
91
Likes
35
Rating
5

Peacemaker Shield FREE verison

FREE version of my Peacemaker Shield models NOTE: free version have lower quality

Downloads
91
Likes
7
Rating
0
P
Printablesswoollard

PreSonus Eris 3.5 Stand Plate

I printed in PLA+ with 2 walls and 20% cubic infill and it seems plenty strong for these small lightweight speakers. It's also very slightly oversized front to back to allow felt pads in the front.

Downloads
90
Likes
15
Rating
5
P
PrintablesModal Prints

Peristaltic pump compatible with lego

Used https://www.thingiverse.com/thing:454702 to get a working pump and added holes to make it compatible with lego technic. I've been using it with 6mm silicone aquarium tubing to pump small amounts of citric acid into a baking soda…

Downloads
90
Likes
7
Rating
5
P
PrintablesMrCliveMrClive

Parameterised Gears (Fusion) V1

This model is my first version of parameterised gears in fusion. Built as part of my parameterisation of my herringbone roller bearing. The model includes both a spur gear and rack. Both can be adjusted to suit any module (tooth size),…

Downloads
89
Likes
4
Rating
0
P
PrintablesTelles0808

Project AERIS | The Floating Photo Display (No Supports)

The Concept I designed this stand because I wanted a clean way to display photos on my desk without the visual weight of a full frame. The goal was to mimic the look of bent lamination (bentwood), keeping the focus entirely on the image.…

Downloads
88
Likes
45
Rating
0
P
PrintablesDrakarah

Parameterisable (FreeCAD) Skadis mounts

As I was building my tool wall there were a lot of bits and bobs that didn't have a ready made Skadis model online yet and while there are some OpenSCAD models out there I didn't really like them so I threw together my own and the…

Downloads
86
Likes
6
Rating
0
P
Printablestacious

Eris 3.5 Stand - 15 Degree

Designed to point speakers at a 15 degree angle. Print 4, 2 per speaker, or 1 per speaker if you live life on the edge. Printed with all walls for a little extra rigidity. Added feet, not necessary, but I was testing out TPU.

Downloads
81
Likes
17
Rating
5
P
Printablesemertonom

Hunter Douglas Applause LiteRise Blind Handle

A handle for raising and lowering Hunter-Douglas Applause LiteRise blinds. May work for other LiteRise blinds, I guess? I'm only really familiar with this particular set of blinds. This is one of the first models I ever designed, and as…

Downloads
79
Likes
4
Rating
0
P
Printablesjonlives

Parameterised Drawer Organiser

Remix of yaras' excellent drawer organiser to add a parameterised Fusion file for the main piece of the organiser since I wanted to use it in a different dimension drawer than the original, and a fix for the 4-leg connector to size it…

Downloads
78
Likes
18
Rating
0

Cherish Ball (Auto-Opening)

This Cherish Ball was created as part of #ProjectKurt project using the Editable Poké Ball model (listed as a remix here), based off of the in-game model from Pokemon Let’s Go Pikachu and Eevee. It’s part of an ongoing series of Poké…

Downloads
77
Likes
22
Rating
0
P
Printablesjpoles1

NEMA 17 Planetary Peristaltic

This is a remix of the peristaltic planetary gear with lots of improvements baked in. Most notably, this pump mounts directly onto a NEMA 17 stepper motor. It also opens up using a hinge to allow the tubing to be easily loaded into the…

Downloads
75
Likes
10
Rating
0
P
PrintablesBubsBuilds

High Flow, 2 Channel Peristaltic Pump

Full build details here Peristaltic pump with two flow channels, each of which capable of flowing up to 5 liters per minute, although recommended continuous flow rate closer to 2 liters per minute. Initially designed to be used with an…

Downloads
75
Likes
15
Rating
0

Peristaltic pump (strong)

I present my peristaltic pump for watering flowers on the balcony based on the engine from the Ford Scorpio ABS pump and a hose 8 mm (inner diameter) / 10 mm (outer diameter). I printed the pump from PLA because its elements do not come…

Downloads
74
Likes
10
Rating
0
P
PrintablesGatCode

Peristaltic Pump Controller Mount

This is a simple holder for a 5x7cm prototyping PCB with holes for a potentiometer and a LED. For the pump I used the design of silisand ( https://www.thingiverse.com/thing:1134817 ). The schematics of my circuit can be found in the…

Downloads
73
Likes
26
Rating
0
P
PrintablesBubsBuilds

Modular Peristaltic Pump Concept Tester

My first attempt at a 'budget' dosing peristaltic pump, mixing some design concepts together from some previous, related designs. You can find more info on the design, and I will be continuing to add related designs, here. One of the main…

Downloads
71
Likes
21
Rating
0
P
PrintablesBubsBuilds

Manual Peristaltic Pump

I made these pumps primarily to test something else where I wanted to use peristaltic pumps, but needed fine control...I also just was curious how hard it would be to make a printed peristaltic pump :) Turns out, not too bad! I used 3/8"…

Downloads
70
Likes
17
Rating
0
P
PrintablesMarkHez

Parameterised Over-Door double Coat Hook

A simple double coat hook that clips over the top of a door. Door thickness, space at the top of the door, and offset of the top hook (to stick out past something hung on the bottom hook) are adjustable in Fusion360 Parameters. Default…

Downloads
68
Likes
2
Rating
0
P
PrintablesBrian42

Cherish Ball

This is a Cherish Ball that I modeled completely in Onshape because I was a bit bored and had the urge to model something. I modeled this in around 2 hours and I think it came out pretty good.

Downloads
68
Likes
3
Rating
0
P
PrintablesFIB

Gryphon Meat Tenderiser Nose

I liked the Meat Tenderiser designed by Vent357 but I felt it needed a bit more oomph :) So I remade the piece and added the ability to insert a different coloured barrel to make it pop! This is technically a remix (even though I built it…

Downloads
66
Likes
16
Rating
0
P
Printablesthemakedomaker

Presonus Eris 3.5 Speaker Stand

I designed these for the PreSonus Eris 3.5 Studio Monitors, but they should work for any speaker. I included the Fusion360 file too, in case someone wants to modify for their own usage. Put some foam between the desk and the stand to…

Downloads
65
Likes
5
Rating
5
P
PrintablesErmonzo

Periscope corner body and mirror cover

Periscope corner body and mirror cover for 50 mm PCV pipe, mirror 74x52

Downloads
65
Likes
8
Rating
0
P
Printablessamywamy10

Gridfinity Drill Bit Holder 3x1 (2U Height) - Parameterised

This is a Gridfinity drill bit holder which can hold 5 drill bits in a 3x1 (2U height so they can stack) space. The .stl file is set up to hold five bits: 4mm wide x 48.5mm long bit 5mm wide x 60mm long bit 6mm wide x 73.6mm long bit 8mm…

Downloads
65
Likes
6
Rating
0
P
PrintablesHackjaz

Hextraction Mattress Asterisk Tile

Mattress Asterisk — because it’s fun to say! This is a purely aesthetic remix of Zack Freedman’s basic Asterisk Tile — now with an ultra-plush pillow top! Learn more about the free 3D printed board game Hextraction here . Print Settings…

Downloads
64
Likes
10
Rating
0
P
PrintablesEPL

Drill bit stand - parameterised

A parameterised drill bit stand that can be mounted on a tool board. Features include with mounting holes to screw it to a tool board. with a label to print and stick on the front. that can be changed to hold your set of bits. that can be…

Downloads
63
Likes
18
Rating
0
P
Printablesbiscuitless

Peristaltic Pump Housing

This is a housing for a pump. I created this so I could move isopropyl alcohol from a container to a filter set-up This contains: 12V Barrel Jack DC Motor Controller Peristatic pump On/off Switch The switch is optional since the motor…

Downloads
62
Likes
3
Rating
0
P
PrintablesHappyBlue

Vertical laptop holder parameterised

A simple model to hold 2 laptops and a tablet, I use it to hold the laptops of me and my partner as well as my reMarkable2 in the middle. I have included the original Fusion 360 file so that you can update the widths of the holders to…

Downloads
61
Likes
3
Rating
0
P
PrintablesJakub Kříž

Asterisk keychain

This isn't just an accessory, it's a statement. A statement that says, 'I'm not afraid to be different, and I might know the combination to the universe.' Support me "If you dig what I'm creating and want to support the journey, consider…

Downloads
61
Likes
6
Rating
4
P
PrintablesFloatingBoater

Garden solar light fence bracket (parameterised)

Generic solar LED garden lights are supplied with a plastic ground spike and a cylindrical pole which works, but puts then in conflict with lawn mowers and plant shadows. This is a simple openSCAD script with parameters to make it easy to…

Downloads
60
Likes
20
Rating
5
P
PrintablesCWCDesigns

The Hand of Eris 45 RPM Adapter Version 2

Lost my old 45 adapter. Made a bunch of new ones in the Discordian theme. Played a 45 after it was done. Music ensued. Chaos 45 RPM Adapter - https://www.thingiverse.com/thing:2847311 Chaos 45 RPM Adapter Version 2 -…

Downloads
60
Likes
3
Rating
5

Dual Peristaltic Pump mount with mixing stepper motor din rail mount

A din rail mount for two Peristaltic pumps and a stepper motor to drive a mixing padel. The pump we used: https://a.co/d/fWMLnrs The stepper motor is a standard NEMA 17. You will need to print two tabs for this design. They can be found…

Downloads
56
Likes
12
Rating
0
P
Printablesflohoff

Peristaltic pump mount

Needed a plate mount for a 12V peristaltic pump. In this case 48mm bore mount distance.

Downloads
56
Likes
4
Rating
0
P
PrintablesWobblyBonsai157

Left Handed Boomerang - "Feverish Hook" Remix By Lapjoint

Simple Remix for the left handed people out there :)) Sorry for the poor imagery, but there it is. (top one is left for comparison)

Downloads
55
Likes
5
Rating
0

FHW: DeRista Razor Hand Plane

Hey there tribe, i wanted to make a hand plane so I did. the blade is the DiResta Razor. -edit: sorry the nut was too big on the OD so i made a different one. nut v2. -edit 2: I made a v2 base with handles, figured I should add it. Here…

Downloads
55
Likes
13
Rating
0

Asterisk Pants Stud button

Either glue retainer pin into button face or use screw with pan head. The asterisk (/ˈæst(ə)rɪsk/ *), from Late Latin asteriscus, from Ancient Greek ἀστερίσκος, asteriskos, "little star", is a typographical symbol. It is used as “wild…

Downloads
48
Likes
2
Rating
5
P
PrintablesSapuSeven

Low-Poly Eristoff Ginger Wolf Head Shotglass

The Eristoff Ginger came with a beautiful low-poly shotglass in the shape of a wolf head. I really liked the design and decided to model it myself using Blender, so here's my copy as a printable 3d model. Notes: Use a support with…

Downloads
48
Likes
3
Rating
0

peristaltic pump Mount for the Yosoo 6v Dosing pump from amazon.

I designed this simple mounting system for the Yosoo 6v Dosing pump I got from Amazon .(https://www.amazon.com/gp/product/B00HLCOXFI/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1) I Printed With PETG and am truly amazed at how strong this…

Downloads
48
Likes
5
Rating
5
P
PrintablesFumo

Ser-Veresta (黒炉の魔剣) from Anime "The Asterisk War"

I made this model years ago, it's a low poly model of the Sword called Ser-Veresta from the Anime “The Asterisk War”. In the picture i colored it, but i guess if you have an AMS you can also do a multi-color print. I drew some supports on…

Downloads
47
Likes
6
Rating
0