Search results: fast

Sort order

2,801 models

P
PrintablesLR3DUK

Fast-Printing Modular Drawer System (Vase Mode)

Hi Everyone: I originally posted this design for a fast-printing modular drawer system on Thingiverse, but quite a few people suggested that I also post it Printables (I can see why. Printables runs so much smoother and the support is…

Downloads
48,007
Likes
19,525
Rating
4.83
P
PrintablesJernejP.

Bed scraper - fast print 15min - minimal filament usage 3g

Print in PLA so you dont damage the printbed. Check out the new larger model at: https://www.printables.com/model/291609-bed-scraper-mk2-8g-25min Still uses only 8g and prints in 25min. Print instructions Click print =)

Downloads
39,396
Likes
3,966
Rating
4.78
P
PrintablesLR3DUK

Fast-Print Mobile/Cell Phone Stand (Vase Mode)

This fast-printing phone stand has been specifically designed to print in ‘vase mode’ (and 0.8mm line width) to allow for very fast printing and low filament usage, whilst maximising strength and stability. Key features: Very fast to…

Downloads
15,755
Likes
1,448
Rating
4.64
P
PrintablesCelta

Temp Tower (Fast)

I wanted a temperature tower that was fast as most of the models would take several hours. Found this model by spiga76 , changed the PLA model a bit to go from 230-190 instead of 240-200 and added labels for filament types. Printing For…

Downloads
10,440
Likes
606
Rating
4.9
P
PrintablesEttil Vrye

Parametric woodworking marking-gauge /w fast-lock

This is a marking-gauge for woodworking purposes to mark the same measurements against different edges. I found some existing marking-gauges around but wasn't able to adapt them to my ruler measurements. So I decided to make my own in…

Downloads
4,880
Likes
1,798
Rating
4.88
P
Printablesmeron

angels and bells - hangable Christmas ornaments - fast print (11-28 min)

Folding Christmas decorations inspired by paper cutouts from school years. Used PLA and PLA+ filaments. Printed on Original Prusa MINI+ with standard PLA preset without any problems. Manual filament change required after the second layer…

Downloads
3,636
Likes
765
Rating
4.93
P
Printablesdj_redbird

Tripp Trapp Trofast Clip (metal basket)

The clip is being used to mount an IKEA TROFAST (42x30x10cm) metal basket to a Tripp Trapp. The clip will not work with the TROFAST plastic bins. I have the 4th Generation Tripp trapp at home. I think it should also fit on the 3rd…

Downloads
2,206
Likes
107
Rating
4.44
P
Printablesdevdrik

Fast printing foldable box in cardboard style, fully parameterized

This is a fast printing, fully parameterized cardboard style box. Why I did this I made this because I hated to print forever when I needed a little box, like a gift box or a container for srews or whatnot. This model is only 2 layers…

Downloads
2,111
Likes
335
Rating
4.81
P
PrintablesWim V

Rope Rap (like a TyRap, fast and strong)

The super simplicity of a Tyrap / Tie-Wrap / Zip-Tie translated to use with a rope. Ever hung up a clothesline or something else hanging from a tree on vacation? Always that fiddling with tying the rope and untying it again at the end of…

Downloads
2,000
Likes
1,117
Rating
4.84
P
PrintablesMatthewGTaylor

Keychain Balm Clip - 2 Sizes - Fast print

Improved rev 1 | Original model sized for Burts Bees sized tubes (approx. 67mm long by 16mm diameter) with some nice improvements: Model is a little sleeker near the keychain loop. Uses a little bit less material and prints a little…

Downloads
1,702
Likes
581
Rating
4.91
P
PrintablesSeabird HH

Prusa Mini Raspberry Pi Camera Mount - by Clip-Fastening

The mounting is done by clipping in the bracket and can be moved forward or backward if necessary ... I thought I could print the bracket I had designed for the Prusa MK3s. It fits too, but very tight, so it is very difficult to move.…

Downloads
1,654
Likes
281
Rating
4.84
P
Printablesadmin
18+

The source marked this model as adult content.

Downloads
1,555
Likes
342
Rating
4.88
P
PrintablesPrintaUser

Tiny Toy Blaster V2 (6mm Airsoft Toy Gun) No Glue, No Fasteners: Just Rubber Bands and Prints

Summary Dinky little toy blaster. it shoots about 30 feet, is pretty small and is made out of purely printed plastic and two rubber bands (One for the trigger and one for the magazine). It requires no fasteners, or glue, and just uses…

Downloads
1,519
Likes
193
Rating
4.64
P
PrintablesMarin

PARKSIDE X20V_Team Battery connector with Faston terminal

Update: v1.1, July 27, 2021. Model slightly uppdated to suit other of my output connectors. Sliced with 0,15mm layer height. A pdf file added: Parkside battery system.pdf, (placed under Download package). This is one of my first printed…

Downloads
1,286
Likes
168
Rating
4.6

HexScraper fast (18mins 0.6mm / 27mins 0.4mm)

Please compare the first photo with your slicer before printing. Make sure that your scraper head underside looks like photo 3. If it takes longer than 36 minutes to print, then something is wrong with the slicer settings. Optimized…

Downloads
1,276
Likes
272
Rating
4.72
P
PrintablesSeabird HH

Prusa MK3S Raspberry Pi Camera Mount - by Clip-Fastening

The mounting of this bracket is achieved by clip-fastening! The development of this camera mount was inspired by various mounts that can be found on Thingiverse. As it is, none of them was exactly what I had in mind. That's why I decided…

Downloads
1,103
Likes
162
Rating
4.97
P
PrintablesTrocheHole

GT2 Belt Fastener

A reusable fastener without damaging the GT2/2GT (width: 6mm) timing belts.

Downloads
1,030
Likes
208
Rating
4.92
P
PrintablesRoiku

Ford Mustang fastback 1969

Instagram : @roiku3d

Downloads
902
Likes
156
Rating
4.5
P
Printableselod

Fast Bed Mesh Level Grid

it s the fastest to print currently ~~20m connecting element for simple peel off

Downloads
856
Likes
19
Rating
4.67
P
PrintablesGralastair Bean

fast 30 min temperature & bridging tower MK4S HF nozzle

Temperature towers should be fast and easy. I don't want to wait for hours just for a test. This tower is shorter and narrower than most models out there and uses increments of 10C to quickly get you close to the optimal temperature for…

Downloads
812
Likes
87
Rating
4.8
P
Printablesstudiobl.nl

Mushroom Lamp - fast print for e14 lampholder with screwfix

This decorative and functional light has been designed to be printed in one continuous spiral - fast, lightweight, material saving, functional and... beautiful? The model is prepared for an E14 220V lamp holder with a screw fix (+/- 3 cm…

Downloads
730
Likes
215
Rating
5
P
Printablesvolly

very flat snap fastener - i.e. for wallets or fabric

I contructed this snap fastener / press stud to repair my wallet. After printing, simply sew on with needle and thread. Used it on my wallet for the last 2 month now - and it worked quit flawless. Print instructions I printed with: 0.6mm…

Downloads
583
Likes
271
Rating
5
P
Printablesanimatorgeek

Fast printing screw-top desiccant container (old version 1)

I've released a new, improved version of this container. Check it out here . Note: this model MUST BE PRINTED IN VASE MODE . If you print it in normal mode, you're just going to get a solid cylinder. This is a desiccant container designed…

Downloads
550
Likes
105
Rating
4.79
P
PrintablesYanev

Fast charging power bank

Fast charging power bank with IP5328P. This IC supports many protocols and is $ 5 in Ali Express. This is the link: https://www.aliexpress.com/item/4001096118395.html?spm=a2g0s.9042311.0.0.27424c4dNPbXou The box is parametric and can be…

Downloads
529
Likes
90
Rating
4.67
P
Printablesso meone

Fast Print ESP32 WEMOS S2 Mini Case with Buttons

You absolutely need to use arachne/variable extrusion width to print this. The outer walls vary from 0.38-0.6mm to provide the snapping action for the lid while still using only 1 “perimeter” to allow fast printing. The reset and…

Downloads
509
Likes
28
Rating
0
P
PrintablesKid Printer

NVG camera mount for Tactical FAST helmet

Use the screw that came with the camera case. Push the back of the print into the slot and push the front firmly until it clicks and is securely in place. Use the lowest possible layer height and a wall count of 4 for best results (with…

Downloads
443
Likes
33
Rating
3
P
PrintablesThesBer

Snapmaker U1 Spool Holder - Fast Minimalist Print - NEW snapText or snapU1 design

🚀 Snapmaker U1 Minimalist Fast Print Spool Holder 🚀 Need to use a third-party spool with an oversized center hole on your Snapmaker U1 but don't want to wait hours to finish printing? This design is for you! The focus here was on speed…

Downloads
413
Likes
51
Rating
4.86
P
Printablesv

fast whistle

very loud whistle

Downloads
411
Likes
20
Rating
4.43
P
PrintablesTeo_211

Ford Mustang Fastback 1969 Wall Art

If you enjoy my work, you can support me with a small contribution ☕ It really helps me keep creating and bringing everyone’s ideas to life: https://buymeacoffee.com/teo_211

Downloads
368
Likes
78
Rating
5
P
PrintablesTim Fechner

FASTER PRINT tamper evident lock / seal

Quite fast to print, took me ~13 mins with the MK3S. Printed with PETG & PLA for comparison, works well in both variants.

Downloads
355
Likes
28
Rating
4.17
P
PrintablesMickael54

Fast printed goniometer

Small goniometer for medical use. Printed in PETG without supports. Best results with 0,15 layer height. ⚠️ Enable Advanced print settings > Layers and perimeters > Quality > Detect thin walls. The two parts have to be carefully separated…

Downloads
353
Likes
41
Rating
4.67
P
PrintablesBen

Dog Poop Bag Holder (fast print)

A simple holder attached to the leash for used bags, just slip the bag into either slot and the knot will hold it! Can be used for multiple bags and as a bonus if you turn it upside down it looks like a dog :D 10% rectiliner infill and 3…

Downloads
295
Likes
66
Rating
5
P
PrintablesBodo Runde

Playmobil shelf - IKEA Trofast

My kids wanted to have some more furniture for their Playmobil. Looking around there was this Dollhouse cupboard with drawers which looks really awesome. Yet my kids wanted something different, therefore I started modeling on my own.…

Downloads
288
Likes
62
Rating
4
P
PrintablesKzhideout

Apple Watch Charger Stand (Fast Charger Only)

Apple watch charger stand will only fit new fast charger size. You can mirror the design in Cura to get the lefty version. Print settings: 20% infill print on side 0.2mm layer height supports everywhere Printer used: Creality Ender 3…

Downloads
280
Likes
35
Rating
5
P
PrintablesMax

Filament Clip | FlexBow | Print-in-Place Compliant Spool Clip, Fast and Efficient.

🏹 FlexBow Filament Clip A simple and effective filament clip inspired by a bow mechanism . The FlexBow acts like a bow under tension, creating constant pressure against the spool walls while securing the filament. ⚙ How it works Pinch the…

Downloads
236
Likes
77
Rating
4
P
PrintablesMetikumi

Super Fast Drying Soap/Pad/Brush Dish Ventilated from Below LR2264

This is my design of dish that is ventilated from below. Objects placed in this dish dry fast, as there is an air flow possible from all sides. How to Print the Dish Print the dish with the flat bottom on the print bed. In order to get…

Downloads
236
Likes
52
Rating
5
P
PrintablesBossingArt3D
18+

The source marked this model as adult content.

Downloads
235
Likes
100
Rating
0
P
PrintablesMatthew Ray

Faster Print, DtM-v3.1 Face Shield PPE for COVID-19

MAKES 2 SHIELDS with a ~1h 20m reduction in print time. NEW VERSION helps for better build plate adherence on the MK3S. I've updated this to drop the print time down to ~3h 40m for 2 on an MK3s. THIS IS A REDUCTION OF ~1h 20m!!!! for two…

Downloads
223
Likes
4
Rating
5
P
Printablesrevo

Trofast Stop Block

Stop block can be added at the back of IKEA Trofast rails to prevent containers hitting the wall. It's enough to use it on one side, simply slide it inside the rail and use M4x25 screw to attach. When in place, metal containers are…

Downloads
210
Likes
28
Rating
5
P
PrintablesJB

Catapult Card + 3 fast projectiles fits PrusaMini

Adam-M 's Catapult Card is realy great and the only missing peace are the right projectiles. So I resized the best flying projectiles from SteveJohnsen and put them into the Catapult Card. They are even flying faster know! One print,…

Downloads
207
Likes
17
Rating
5
P

Low-Poly Ford Mustang Fastback - Modular Cars

Low-Poly model of a 1965 Ford Mustang Fastback 289. Included are functional double-arm suspension, Print-In-Place wheels, and three different rims to adorn your wheels. This staple of American muscle cars is at roughly 1:25 scale.…

Downloads
197
Likes
27
Rating
0
P
Printablesfeilo87

Trofast (IKEA) - Alpha und Beta Hauck Schiene

Auch wenn es bereits einige Vorlagen zur Befestigung der Trofast Box am Hauck Hochstuhl gibt, war keine für uns optimal. Die Box kann so nicht herausgeschoben werden und liegt durch die Führung stabil auf der Schiene. Die Druckdatei habe…

Downloads
188
Likes
15
Rating
5
P
PrintablesToast123

Trapped Dice! Fast Print

Printing Settings Infill Density: 20-30% Layer Height Standard 0.2 mm Wall Count 2-3 Material PLA Fan Speed 100% Print Speed 50 m/s Upload makes/comments

Downloads
186
Likes
27
Rating
0
P
PrintablesCoronaSolved

Face Shield CS V2 - 1h per print! - More comfortable and faster print | compatible with Prusa

Hey, We have made an optimized face shield, which is based on the Prusa Face shield and on a face shield we use locally (Open DIY maker space), which was made with a medical team. This gives the user more comfort and space for glasses +…

Downloads
175
Likes
6
Rating
5
P
Printableslytta

Cattainer - Fast Vase Mode Print

A small, quick container shaped like a cat, which prints in spiral vase mode in two parts and uses about 3.5 grams of material. Things you could put in a cattainer: at least a dozen paper clips 3d printed clips emergency advil supply…

Downloads
171
Likes
34
Rating
5
P
PrintablesTomek

Gravitrax spacer Fast and Spiral (3,4,5,6,8,10u)

I thought that it should be pretty easy to design spiral-mode gravitrax spacer, but yet I couldn't find any - so I designed one. It prints fast and uses as little filament as possible. So if You have 8 grams of filament and 15-20 minutes…

Downloads
169
Likes
16
Rating
4
P
Printables-Koso-

Fast Taco Holder

Taco Holder to keep your tacos standing upright! Three files for the most common nozzle sizes. Can be printed in vase mode or normal. Just one perimeter so larger nozzle equals thicker taco holder.

Downloads
169
Likes
24
Rating
5
P
Printablesmedienlampe

Bosch Cool (2000)/4000/5000 Fast & Simple Window Hose Adapter (STEP file included)

Background There are a lot of amazing and well thought through hose adapters for mobile air conditioners available, but these have quite long print times. I'm impatient and wanted something which is simpler, uses the available parts of my…

Downloads
140
Likes
11
Rating
0
P
PrintablesTmpx64

Fast print Sponge Holder

Print files for Mk2/3 and Mini included, otherwise here are the recommended print settings to achieve a 60min print with a 0.4 nozzle: First Layer 0.3 Layers 0.4 Brim 4.0mm seam position → rear Extrusion width: Default 0.45 First layer…

Downloads
136
Likes
32
Rating
0
P
PrintablesMADAO

Fast retraction test

Print Settings Rafts: No Supports: No Resolution: 0,2mm Infill: no need Category: 3D Printing Tests

Downloads
134
Likes
5
Rating
5
P
Printablesso meone

Fast Print fully parametric LED Matrix Cover / Diffusor made in Fullcontrol, tested with: 8x8 16x16 32x32

A parametric LED Matrix diffusor front plate. fullcontrolXYZ based, 100%extrusion, 0 travel, 0 retractions. Extrudes at 0.8mm, which is totally fine for a 0.4nozzle. A bigger nozzle will probably allow much faster print speeds. Prints as…

Downloads
131
Likes
11
Rating
0
P
PrintableseMHa421

Verbindungswinkel zum Stapeln von IKEA Trofast Regalen

Einfache Winkel um mehrere IKEA Trofast Regale übereinander zu stellen und zu verbinden. Es können die originalen Schrauben verwendet werden. Kein Bohren nötig. Druckdatei enthält einen rechten und linken Winkel. Pro Etage werden je 2…

Downloads
126
Likes
10
Rating
5
P
Printablesfandaa7

Lambda keychain - FAST PRINT

Easy and fast print. with attached gcode, print in 14minutes.

Downloads
125
Likes
7
Rating
5
P
PrintablesRo3Deee

Prusa XL fast filament speed loader

Usage, building instructions and materials: NEW !! 2024-10-21 - version 4: experimental new multi-material gears with print-in-place bearing improved design of the main body 1. Usage This is how this device is used to quickly load…

Downloads
123
Likes
85
Rating
5
P
Printablesso meone

Fast print case for esp32

A minimalist esp32 case, prints in 11 minutes Update: Added experimental 5m vase mode version of body.

Downloads
103
Likes
11
Rating
5
P
PrintablesMehTechArt

Bag Clip – Universal Clamp Fastener

🧩 Bag Clip – Universal Clamp Fastener This clip is a simple and effective way to securely close open food packages. Perfect for chips, coffee, flour, rice, pet food, and other products stored in plastic bags. Designed as a universal…

Downloads
101
Likes
29
Rating
5

Buckle Strap Clip Fast Lock (compliant mechanism)

Use Standard 3D printing slicer to Build this piece. Other Creations : https://www.instagram.com/leclubsandwich_studio/

Downloads
98
Likes
37
Rating
0
P
Printablessabin

Simple Customizable Tweezers (fast print!)

Functional tweezers which you can customizable a bit! No supports required and can be printed in around 1 hour. Print with 2 perimeters at 0.16 layer height, 2/3 bottom and top solid layers, 10% infill for the best results. I have…

Downloads
95
Likes
16
Rating
4.67
P
PrintablesMe2d

Zavírací spona pořadače Stanley / Closing fastener for Stanley organiser

It is spare parts for repair a broken closing fastener for stanley organiser. Dimension in pictures. Printed with PLA. Support not need. Model have build in supports, cut off them after print. Maybee add some brim if you got print…

Downloads
91
Likes
38
Rating
0
P
PrintablesTomáš

Jumping Frogs | Fast print (<10min)

Jumping forgs 💡Features Fast print <10min No supports Easy to print Fun toy 📌Use Cases Perfect toy for fun. Ideal for adults and children alike. 💾Recommended Print Settings Support: No-Supports (optionaly print the file with snap support)…

Downloads
89
Likes
16
Rating
0
P
PrintablesLorenz H

Hyundai i30 Fastback Silhouette

Silhouette of the Hyundai i30 Fastback, it can be used as a keychain.

Downloads
81
Likes
10
Rating
0
P
PrintablesHeadshaker

Fastening hooks for INTEX pool cover tarpaulin

Those who want to winterize their pool or basically just want to stretch a tarp over the pool have certainly already looked for a solution to fix the tarp. These reliable fastening hooks are attached to the vertical bars of the pool with…

Downloads
74
Likes
12
Rating
0
P
PrintablesDallan

Automotive Trunk Door Fastening Hook

Hooks under trunk door on car or minivan and provides hole for paracord. Should work for most vehicles. Originally designed to secure back of canoe to top of vehicle. Parameterized Open SCAD file provided for fine tuning or extending the…

Downloads
70
Likes
31
Rating
5
P
PrintablesDaniel Westhof

1mm nozzle version of Crazy FAST Voodoo Headband Prusa Faceshield compatible

UPDATE There is a new version: https://www.prusaprinters.org/prints/29052-1mm-voodoo-faceshield-v34 This print uses Voodoo magic and a 1mm nozzle to enhance print speed while still producing a good quality finish. ATTENTION!!! These files…

Downloads
68
Likes
0
Rating
0
P
Printableshilch

fast printable easter egg dry stand

Who doesn't know that? The freshly painted Easter egg is full of sticky paint and now where to put it to dry? So far we have always used our many egg cups, but the eggs always stuck to them and an unsightly edge remained on the egg. With…

Downloads
67
Likes
11
Rating
5
P
Printablesjodoll

Fastening Clips for Blumat Tubes

You've just got your Blumat irrigation system , are eager to set it up but then you've noticed that the black tube is way to stiff to bend nicely around corners or even stay remotly where you've put it? Then you've probably didn't catch…

Downloads
65
Likes
8
Rating
0
P
PrintablesJB

Gazelle bicycle mudguard fastening clip / spatbord klem

This part replaces the top part of a mudguard holder on some models of Gazelle (children) bikes. I hope this helps for someone. This is only the upper part. The part most likely to break. Included is the Fusion360 archive to help you get…

Downloads
58
Likes
20
Rating
0
P
Printablesplo73

Fast connector for WS2812 led strips without soldering

Practical and fast, it allows you to connect several strips together or create simple joints in curves or decorations, the only limit will be your imagination. For their use You will need: Led strips WS2812 1 x fast connector 1 x clip…

Downloads
56
Likes
14
Rating
0
P
PrintablesTecmir

Filament straightener for e-steps calibration Fast

A remix of my original filament straightener model that is created for the minimum filament requirement contest. I hope it works for everyone!

Downloads
56
Likes
12
Rating
5
P
PrintablesTheAbidingOne

Tray support - IKEA Trofast

Hi IKEA Trofast polymer boxes tend to deform under high load. This is a support element for the tray. You need 8x screws: 4,0x20 TX15 per tray. Greatings

Downloads
54
Likes
11
Rating
0

Ender 3 S1 Drawer divider - fast print

This design is based on fast printing time. The gcode file prints in 1h3m on my S1. Used regular PLA. Category: 3D Printer Accessories

Downloads
49
Likes
8
Rating
5
P
PrintablesPS Kamýk

Koncový doraz pro systém IKEA TROFAST (end stop)

Úložný systém IKEA TROFAST vyrobený z mořené borovice neobsahuje zadní dorazy pro výsuvné boxy. Vytvořil jsem tuto jednoduchou zarážku, kterou stačí zezadu nasunout na rám a přišroubovat vruty tloušťky 2mm. Sestavu nemám zavěšenou na zdi,…

Downloads
48
Likes
12
Rating
0
P
PrintablesDA3DALUS

Bracket / Fastening / Holder for 8mm rod e.g. Kids Flag Mast on playhouse

The bracket can be used to attach an 8mm rod. In this case it is used to attach a flag mast (8mm) to a children playhouse. One bracket has a throughout 8,1mm hole. The other bracket has a bottom/stop. The *.stl is available to adjust the…

Downloads
46
Likes
9
Rating
5
P
PrintablesFuntomaas

Paulmann URail: Smoke Alarm fastening (Rauchmelder Halterung) for smartware

(German below) English: Because I didn't like to screw or glue our new room ceilig, I wanted to attach our smoke alarm onto our nice Paulmann URail lightsystem Trails. For an easy attachment I used the genius but simple hookpart from…

Downloads
45
Likes
6
Rating
0
P
PrintablesMakeroni

iPhone 6 & 7 plus holder with hr herbert richter fast fix adapter plate

iPhone 6 & 7 plus holder with hr herbert richter fast fix panorama adapter plate for in car navi application. the adapter plate ist not fix, so you can create your own shape if needed. easy assembling, no glue needed, self snapping into…

Downloads
43
Likes
3
Rating
0
P
PrintablesAinon3Dtisk

Action camera mount for FAST/FMA/MICH helmets

Hello, Today I have for you an Action Camera Holder for FAST/FMA/MICH helmets . A great way to attach the camera to the helmet and then easily remove it. The holder fits perfectly into both helmets and camera holders. Be careful when…

Downloads
40
Likes
7
Rating
5
P
Printablesmach

Cable Fasteners

Cable fasteners for cables in different formats. 1 x 2 x 1.5mm^2 2 x 2 x 1.5mm^2 4 x 2 x 1.5mm^2 2 x 2 x 4mm^2 All fasteners uses 3mm screws with countersunk head. Prints without support.

Downloads
38
Likes
8
Rating
5
P
PrintablesMindCubby

Gingerbread Man Bread Clip - Fast, Easy, Functional Test Print - Beginner Friendly

Key Benefits Ultra-Fast: Prints in under 15 minutes (on a standard 0.4mm nozzle profile). Easy Beginner Print: No supports needed, simple geometry, and great bed adhesion. Practical Test Print: Use it to dial in your flow rates or check…

Downloads
36
Likes
4
Rating
0
P
Printables3dprints4life

openDTU Case mit Display für Lochrasterplatinen (fast print)

Ein simples und schnell zu druckendes Gehäuse für eine openDTU. Ich habe meine openDTU Installation für einen HM-600 auf einer Lochrasterplatine verlötet. Neben dem ESP32 passt in das Gehäuse ebenfalls das Funkmodul und das Display.…

Downloads
34
Likes
3
Rating
0

Fast Beverage & BeerCooler

What is this? This is a cooler to bring your beer or beverage to the correct temperature after a short time of 2–3 minutes. Why should you build it? You forgot to put the beer in the fridge and have a really hot day and don't want to wait…

Downloads
31
Likes
33
Rating
0
P
Printablestsbrownie

Crystal Radio (Fastest Print 7 hrs)

This is a faster printing and smaller footprint version of my other crystal radio bases. It includes the baseboard, coil pillow blocks, and an upgrade of a tuner arm tower. Print Settings Printer Brand: Creality Printer: Ender 3 Pro…

Downloads
29
Likes
4
Rating
0
P
Printablesn00by

WOLFCRAFT DOWELLING JIG FASTENING KNOB

It is a fastening knob for wolfcraft dowelling jig part number 4650000. One of mine broken, then model and replace with printed one. Print Settings Printer Brand: Prusa Printer: MINI Rafts: No Supports: No Resolution: 0.15 mm Infill: 90%…

Downloads
27
Likes
2
Rating
0
P
PrintablesQuick Making

Vase Mode Pencil Box – Fast & Fun Print for Kids!

Keep your kid’s stationery in style with this pencil-shaped pencil box , specially designed for quick, easy 3D printing ! Made for my daughter, this box prints in 5 simple parts , all of which come together to form a realistic pencil…

Downloads
21
Likes
12
Rating
1
P
Printablessgraper

Artika Sonolok Fastener-Free Hook (Short Version)

After covering most wall space in my workroom with Artika Sonolok acoustic paneling, I sized this hook model to hang prints using the IKEA VISBÄCK poster hanger. The design sits on top of a wood slat, staying in place through friction…

Downloads
20
Likes
2
Rating
0
P
PrintablesMatt

Nanami Fast Wireless Charger Stand Inductive Cover

This a cover for the Nanami Fast Wireless Charger Stand. I like the charger but the big blue light was much to bright next to my bed so I printed this cover. Amazon Link Below to the charger Fast Wireless Charger,NANAMI Qi Certified…

Downloads
20
Likes
0
Rating
0
P
PrintablesJellyTitan

Martha tent fast printing hygrometer hanger

Inexpensive “martha tents” (mini greenhouses) common in amateur mycology often have wire shelving that is a bit to big to set a hygrometer on. This fast print hangs the hygrometer/thermometer from the shelving. These hygrometers are…

Downloads
19
Likes
6
Rating
0

Prima Klima - Fast Clamp – Ø 150 mm

Prima Klima - Fast Clamp – Ø 150 mm. Band for connection of fan with carbon filter diameter 150mm. I designed to combine the filter along with a fan for Prima Klima kits - which are used in grow tents :). Waiting for a metal element can…

Downloads
18
Likes
3
Rating
0
P
PrintablesDavideeek

Mustang fastback 2d Wall art whit wheels

2D wall art of Ford Mustang Fastback 10

Downloads
16
Likes
8
Rating
0
P
PrintablesFalling Entropy

Wild Card Wheel - fast print...45 minutes total!

I also sell the physical print of this on Amazon.com here where you can find a couple videos showing how to use it! Elevate your card game experience with this innovative Wild Card Wheel! Measuring 4.5 inches in diameter and 0.25 inches…

Downloads
15
Likes
7
Rating
0
P
PrintablesGerWa61

Pro-K_Klotz-Würfel-24mm-alle-Bohrungen-16mm, alle Ecken gefast 2mm und Farbwechsel

Gleicher Würfel wie voheriges Modell aber verbessert mit Variabler Schichthöhe, Nachbearbeitung vereinfacht-entfällt!

Downloads
14
Likes
1
Rating
0
P
PrintablesAme

Thermometer fast blast chiller

This item allows you to lower the temperature of your thermometer very quickly and effortlessly. Simply insert the thermometer and shake it from the handle provided. I printed this with PLA and 15% infill

Downloads
14
Likes
1
Rating
0
P
PrintablesCarlos Luna

Fast Addition Trick

How fast can you add four 4-digit numbers? With these magic rods, you can do it instantly!!! SPOILER: Pick as many rods as you want, to add the four numbers formed by putting all these rods side by side, you just need to “read” the second…

Downloads
13
Likes
1
Rating
0
P
Printablesstevo

Magnetic knife holder (milwaukee fastback)

It uses 2 magnets(10mm radius and 5mm height). I use milwaukee fastback 5in1. My holder is mounted next to my door so its easy to grab when needed. Its important you add pause at 6mm and insert your magnets. I tried using only one magnet…

Downloads
12
Likes
5
Rating
0
P
Printablespetrepa

Shelf fastener thingy

The thing slides into a steel tube of shelving for securely fastening it to the wall so it won't tip over. Following dimensions of steel tube: Width: ~26 mm Depth: ~45 mm Made for a M6 bolt with a hollow anchor for a plaster wall.

Downloads
12
Likes
2
Rating
0
P
Printablesabberans

PieBowl FAST <1h

The Pie Bowl is a sleek and functional 3D printable design inspired by the "pie crust" edges of an aluminum pie container. This subtle nostalgic touch is paired with a clean, modern look, making it both stylish and practical. Designed for…

Downloads
11
Likes
1
Rating
0
P
PrintablesJohny5

Fastening support - Ericsson SPO

Fastening support for Ericsson SPO 14xx service module card. Print instructions Print Settings Printer Brand: Prusa Printer: i3 MK3 Supports: No Filament: Filament PM PET-G Resolution: 0.15mm Infill: 30%

Downloads
11
Likes
1
Rating
0
P
PrintablesSergik

Fence mesh fastening element. Gap size is 2mm.

It is made in Fusion 360. I made it myself for a fence, because buying such elements is expensive. The diameter of the fence wire is 2mm. I printed this element with an Anycubis Cobra 2 pro with PETG filament.

Downloads
6
Likes
1
Rating
0
P
Printablesdavid

Shower Head Fastener

Replacement part for some generic type of shower head fixture from quite some years back. Original, transparent fastener broke, the new one's matching the style of the printed tube caps made here . Reduce layer height in the top layers…

Downloads
6
Likes
1
Rating
0
P
Printablesbitsplusatoms

Fast-Operation Vise

UPDATE 2022-11-02: A number of people have reported that the clips are a little too thick to insert without a lot of force or sanding. I added a version of the clip that is 0.6mm thinner. It is named ThinnerClip.stl . You may wish to…

Downloads
27,536
Likes
14,081
Rating
4.92
P
Printables3D_Workspace

Silica-Gel-box (spool-container, optimized for super fast print)

These boxes are specially designed to be printed really fast and also to have as many holes as possible to let the wet air reach the silica-gel inside. The screw cap is an easy and durable way to close the box and also open it again to…

Downloads
20,728
Likes
5,001
Rating
4.86