1 / 3
Fast print Sponge Holder
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Prints in under 60 minutes with a standard 0.4 nozzle
- Rating
- 0 / 5
- Likes
- 32
- Downloads
- 136
- Makes
- 0
- Views
- 592
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Print files for Mk2/3 and Mini included, otherwise here are the recommended print settings to achieve a 60min print with a 0.4 nozzle:
- First Layer 0.3
- Layers 0.4
- Brim 4.0mm
- seam position → rear
Extrusion width:
- Default 0.45
- First layer 0.55
- Perimeters 0.60
- External perimeters 0.65
- Infill 0.50
- Solid Infill 0.50
- Top Solid Infill 0.41
- Support Material 0.41
Speed:
- Perimeters: 60mm/s
- External perimeters: 50mm/s
- First Layer speed: 50 mm/s
Happy printing!
Tags
kitchenwatermusichackikeafunctionalmk3cardmk2christmassantatowelplantorigamirainbowdoorstarselfwateringwateringplanterdesignblackgeometricfasthandfloatmixbenchmarkbenchycargiftbobsnowredyellowbluecrealitybathroomabsplaeasytaphometemperaturewetsinkwateringcanpetgshoesoapdryfoldpinkheatshowerspongecleanwaterbottleoverhanglifetreedialcaliperunicornairsoftliquidwatercoolingoozetexturepineshoweraccessorieselftabletopgamingsimplepurplewashshowerhookcalibrationtestprintercalibrationasashowerheadinstrumentultimakerwaterproofopticalfreshfirstlayerkitchensinkinspirationperfecteliquidwaterpumpdoityourselfconvenientproductstrawflowcurvebubbleideasoapbarsplantwateringseasonwetpaletteepongesavonoragnizerbambulabstaw