559 models
Copy/pasted the description from the original author: I designed this piece to mount IKEA SKÅDIS boards onto a wall using regular screws. The board does come with screws and a mounting bracket, but I was looking for a more flexible…
This fixture is used for indexing work using a vise and square for 45, 60, and 90 degree angles. Of course this printed version is not going to be as durable or precise as the commercial metal version, but should still be useful for many…
A light fixture for the Prusa Mini using an IKEA Halvklart USB LED cabinet light: https://www.ikea.com/us/en/p/halvklart-led-cabinet-spotlight-white-90463623/ Could probably take other lights as well. Goes on top of the Z-axis profile.…
This is a base for Grayhill model 02-0 test clips. This is very handy for testing components quickly and consistently. The clips are still available from digikey and likely other sources……
Yamaha soundbar remote control mounting fixture I wanted to mound my remote to those two aluminium rails on my bed. this is what i came up with. It fits perfect. I also included the Fusion 360 file so you can add your own mounting back.…
An AI Produced Piece - Based on the outdoor lighting fixtures at the Martin House in Rochester NY. Not bad.
Amazon Parts list (US): Brass inserts M4 x 8,1 (Metric) https://amzn.to/3PxrdcE Amazon Parts (EU): Brass inserts M4 x 8,1 (Metric) https://amzn.to/4afwZJB
A minimalistic 9x3 Gridfinity ( https://gridfinity.xyz/ ) fixture that holds the Carvera Air 4th axis module. The fixture consists of 4 corner pieces that each have a cutout for you to easily label. The corner pieces are in total 12mm…
This mod is for Nintendo switch FixtureS1 model, allowing mounting Nintendo switch 2. My best print results have been laying down, clip mounts floating, and using minimal supports (PrusaSlicer Auto supports).
Use this fixture to position your blinds bracket. A spacer is included to evenly space if you have a large window with multiple binds. Alternatively there is a hole guide if you prefer to drill a pilot hole. This was designed for Levolor…
Magnetic Fixture for the Movement Sensor of IKEA A light weight but strong solution for fixing IKEA's movement sensor to a steel surface. This use case is for magnets sized 9.8 mm in height and 6 mm in diameter. Create your own model…
:IMPORTANT THREAD / BOLT INFO: I had to scale the clamp bolts up in size about 1-2% and the bolts for the base about 3-5%. That's what worked for me and FOR MY LIKING - everybody's setup is different, your mileage will vary, everything…
All components should be sized correctly as-is. I've individualized everything. I can compile them in a grid as one file upon request. Solid and easy to print helping hand setup for your desk or on the go. Components needed: 1x Body &…
This fixture is designed to machine AR-15 80% lower receiver fire control group pockets. The receiver is affixed vertically to facilitate FCG pocket machining. The fixture is designed to screw down to the 75mm on center M5 bolt pattern of…
The Microjig Matchfit system is endlessly useful for custom jigs, storage, organization, etc, but the bits and knobs are on the expensive side. I modeled and tested a number of variations to land on these, which are fully compatible with…
A parametric FreeCAD model is included.
Drawer style fixture for Mac Mini This bracket serves as a way to fix the Mac Mini on the underside of the desk. All cables can be plugged in before sliding the device into position like a tray or drawer. Tested with Mac Mini M1, if using…
Jig Handle for all kind of jig and fixtures. Two mounting holes for M6 machine screws. Printing Tips: I prefer PETG for printing this handles or if PLA is used +30% infill. Important safety note: Please read and understand all safety…
Align Jig Fiber Laser Fixture Set
This model is designed as a clamp for spot welding lithium batteries. You need to print four fixed plates and four knobs each. In addition to printing the model, you also need to have the following items. BOM:Eight M5*5*7 Heat Set Inserts…
The safest knife is a sharp knife! This print is a mostly 3D printed knife sharpening fixture. The fixture features a magnetic plate that securely holds your knife while sharpening, a sharpening stone holder with a sliding rod for…
EDIT: Added a hexagonal version which should be easier to grip to tighten. I was using a standard TR8 nut and leadscrew in my CNC machine and found it to have tremendous backlash. The typical solution is to use an anti-backlash nut which…
Bottle opener fixture for laser engraving. Holds commonly available bottle openers securely for engraving front and back sides while maintaining correct orientation. Keeps surfaces flat and level. NOTE: I engraved REFOCUS as a reminder…
I have recently purchased a fiber laser, and while it has this handy bed with a lot of tapped holes, there are no pieces that came with it to utilize as fixtures. Amazingly, I didn't find anything out there for models of these, so I made…
This model is used to help facilitate the leveling process of the Creality K1 bed, when it is out of level. Please note, that you should only use this if you really know what you are doing. Using this part can potentially cause damage to…
Update 17-Apr-2024: For Dremel model 3000 I added a separte post, see NOTE below! When working on difficile parts with a Dremel grinder it is good idea to guide the part by hand rather than the machine. Although the Dremel is model 315…
Object description: Grinding fixture for resharpening a Husqvarna Lawnmover Saftey Blade, alternative blades and similar blades for other electric lawnmover types. You can save about 8 Euro = 8 Dollar (at the time of publishing) per…
Witcher Emblem key/towel hook, forged with precision at Kaer Morhen probably. This print contains two parts, the front emblem and the dovetail back plate. Mount the back plate to the wall with two screws and slide the front emblem into…
This fixture is designed for desktop use. The Modular design makes it possible to hold in place parts of different sizes and shapes. The tips of the tensioners can be changed to fit the present use case. The grid allows repositioning of…
Drawn and printed an mount for my Brennstuhl Premium-Line a long time ago. The mounts I found online were not tight enough or the nose not stable. Mounted under my desk - fitting perfectly and very tight. Printed in PETG for flexibility…
print settings: Material = PLA, ASA, ABS Perimeter = 4 or more Infill = 30% Clamp bearings as spare parts for bar tables with a tube diameter of 28mm. The bearings are constructed in two parts to achieve the greatest possible stability.…
Key Features: Large jaw size: 130mm width max. Reflow oven and hot air rework compatible* (Only as heat resistant as the materials you choose to use. If you're using this in a reflow oven, make sure the grips, bearings and glue can…
English For electrical installations in the building, where cables are to be laid on plaster, lightweight construction or board walls, these usually need to be protected inside a cable duct or cable conduit. I have designed these brackets…
Led light fixture for Ender 3 S1 that fits 2 12" under cabinet led bars (available on Amazon, check the images for the type and size of led lights), has a better light output than the original Creality fixture. Comes in 3 parts, center…
If you like my design you can support me on BuyMeACoffee - https://www.buymeacoffee.com/kaushikbm -------- Amazon echo 4th generation wall fixture. Recommended print settings 0.2 layer height 20% infill Print up side down Painted supports…
I have split the tool in the middle so that it fits on smaller printbeds. To connect, fusible nuts for m3 screws are needed as well as M3 screws. Alternatively, a M3 nut can be used on the opposite side.
These 3D-printable fixture plate plugs are compatible with our ¼" and M6 fixture plates. The plugs are designed to easily slip into the threaded fixturing holes and have a single Higbee-start thread at the top allowing the plugs to…
This will hold a red laser to help frame and align items that you want to engrave. I used this laser and power cable. USB Adapter 650nm Red Laser Diode Module Focusable Dot Line Cross Beam 12 * 35mm Lighting 650M-100 (cross)…
This is a case for the little test board. There are two versions of the top. I configured my board with the top left connector shorted, the top right connector has a 50 ohm resistor, and the bottom two connectors are bridged. I use these…
I slightly modified the tripod leg shape. I broke a lot of them and I realized a bit stronger shape.
A bunch of Miata related masks, jigs, and fixtures. Useful for painting engines, valve covers, axles driveshafts, etc.. Also nice for keeping dust & debris out of engines and transmissions during rebuilds. Print Settings Printer Brand:…
These are the lights I use for my work stations, as they are simple, flexible, and fast to make! This printed piece holds the light socket, easily mounts to things with double-sided tape, zip-ties, or screws, and allows you to swivel the…
I wanted to build a new “Honeycomb Storage Wall,” but I was asked to avoid drilling any holes so it could be removed without leaving any marks. To solve this, I designed a bracket based on the hollow inlays, which can be easily attached…
Replacements for old Ikea roller blinds Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.2 Infill: 20% Filament: Prusament PETG Category: 3D Printer Parts
I made this model so I can install the horizontal poles which are 22.5mm ⌀ and the tent poles are 16mm ⌀ but the pole fixture was 22mm ⌀ on the original piece, so I decided to design a custom model which fits my needs, hope I can help…
Object description: Grinding fixture for resharpening a Viking Blade 6008 702 0121 and similar garden shredder blades. The fixture fits on all wet grinders with a 12mm rod like from Torrmek, Scheppach, Güde, Einhell, Holzmann, Weldinger…
This accent light fixture is printed in two parts – a base and a top section. They do not require supports. This accent light fixture is designed specifically to fit a Phillips Hue GU10 LED Smart Bulb. It should also work with other (and…
So you can hang your film sticking fixture on your honeycomb storage wall. On the wiki , this is called the Bambu Lab Sticker Applicator.
Description Custom modelled splint (fixture) for broken thumb. Fixes the last phalanx and knuckle, while doesnt restrict its movement in the big knuckle near Your palm. There are two models - normal and one called “wider” for bigger…
As with so many things, necessity drove me to make this one tonight. A quick pull on the ceiling fan/light chain and SNAP went the little plastic coupler they come with. So a quick design, easy to print, and I'm back in business. The pull…
I needed more airflow in my computer, and I was not using the 5.25" drive bay. This was designed to fit in the drive bay of the Silverstone GD09 computer case, however it's not too difficult to remix, or adapt to your own taste. FreeCAD…
The new AAwireless Two device was released October 20th 2024. This fixture precisely fits the conically shaped device. I made it for my Ioniq 5, but I have included a generic fixture, so you can design your own mount for your car and then…
Hardware Needed: (2) 1/4x20 Bolts / Length - ¾"-1" / Allen Key Head Jig Block - Print Vertically / 100% Infill Jig Rail - Print on Large Flat Side / Print with Tree Supports / 100% Infill
Love the Fireball tools fixture clamps and jigs so designed and printed some basic models. Printed these in PETG-CF at 100% infill so they are reasonably strong. Used M6 heated inserts to be able to bolt tabs to them for guidance and/or…
May work for similar fixtures that are 25mm wide and 42mm tall where it attaches. You should probably print it in a material with decent temperature resistance. I used ABS. PETG is probably fine. Zip tie slots are 6x2mm.
A really simple clamp to keep aquarium lights from falling into the tanks. We have a lot of 5 and 10 gallon tanks, and our LED lights span across them. The aluminum legs don't always stay where we want them, especially when cleaning the…
Deux choix de fixation disponible - Two choices of mounting available.
Add this to your PandaPlacer A1 next to the up camera, and get full dual-level calibration abilities within OpenPnP. Follow the OpenPnP Issues & Solutions for the best possible calibration. Photo print a set of squares. Example file…
A friend of mine lost one of his 2 Ikea Nymane wall fixtures while moving. Since the fixture plate is not sold separately I recreated the part 1:1 in Fusion360 (with a little bit sturdier base plate) without the spring-loaded movement.…
You can find here the official files provided by Bondtech useful to print PFTE tube cutter PFTE tube chamfer shaping supporting MINI heatbreak. Official supporting page here Video here
I wanted a pink light fixture, now i have one.
Grow Tent Pole Fixture (Ø22mm) This fixture is designed to secure support poles to the sides of the indoor plant tent. Unlike the hooks supplied by the manufacturers of the tents, these fixtures clamp onto the tent's vertical poles as…
If you are also not convinced of the new more or less loose cable managment, then this is for you ;) printed in PLA, 15% infill, no support - So easy to print, and stable enough for this purpose. need additionaly some M3 M4 screw, an…
I couldn't find a good balancing fixture for balancing grinding wheels for my bench grinder and soon to own surface grinder. Print two sides (same part no mirror, just double on the build plate) Hardware: 1x 12mm rod 4x 608 skateboard…
This model attaches to the siderails of a ELEGOO Neptune 2 / 3 / 4 extrusion without any other tools. Small screws are needed to attach the camera holder to the stand and the Raspberry Pi Zero to the case. Everything goes together a one…
This fixture can be used to surface mount the LIFX GU10 Downlight or other low-wattage GU10 LED lights. It's designed to fit a standard American 4-inch circular electrical junction box. The base can accommodate a standard GU10 socket…
My home needed a more robust method of mounting my front door light fixtures to it's vinyl siding. Previous owners would change lights and drill new holes to the point where things were pretty bad and I could no longer get a snug…
A mount for my Proxxon rotary tool, and a few simple fixtures to go with it. More photos and complete article here: http://keveney.com/posts/rotary-tool-fixtures/
This is a quick model I put together when I couldn't cut consistent 10 mm length silicone tubes for the silicone bed mod. Works with the recommended 7 mm OD automotive silicone tubing and the cutting slot is 0.5 mm which works well with…
This fixture is used for indexing work using a vise and square for 5, 7, and 9 sided polygons. See the remix link for the even-sided polygon version of this tool. FAIR WARNING : I did not attempt to print out this re-mix, although I…
NOTE: This holder is designed for Dremel model 3000. It is a new model in addition to my earlier post for Dremel model 315! When working on difficile parts with a Dremel grinder it is good idea to guide the part by hand rather than the…
The Chainguard is printed in two parts to fit it on most printbeds, the fixture is printed in two parts for obvious reasons. The two parts of the chaingurd fit together by a little slot and have sufficient gluing surfece to conect them…
Wasnt intending to use the chrome mirror on the sprue anyways i figured id cheap out and not buy it at all. I did however want to use the "glass" part of the headlights so i designed printable fixtures. They sandwich the "glass" headlight…
This piece allows an O-Light PL-PRO Valkyrie flashlight to fit into a surefire x300 specific omnivore holster. The omnivore will need some modification to the rails to fit in, but will then engage the snap as the x300 would. Print in…
Here's a caliper modeled camera fixture for the Bambu Lab camera in the P1P. Supports suggested. This is not a 100% duplication, and has some adjustments to allow easier 3D printing. Note: I would suggest printing this model top down, but…
Drill Guide Fixture for Makita DDF482. The other parts you will need can be found here: https://www.thingiverse.com/thing:4803970
Info about develpment of this can be found here: https://pinside.com/pinball/forum/topic/a-modern-minimal-spotlight-fixture- To use this you'll need to buy opmax bulbs from Comet's website. Get wedge, much easier to disassemble. Remove…
Inspired by the GRAS 45CC Compared to my old KB501X plate the DCHPF enables proper fitment of the headphone and the ability to measure left and right channel more seamlessly. Significantly more rigid structure, fully secured coupler and…
This is a vacuum fixture table designed specifically for CNC 3018 machines , optimized for PCB milling and engraving . It allows PCBs and thin flat stock to be held securely using vacuum, keeping the board perfectly flat during machining…
Do NOT use this fixture with standard halogen GU10 lamps unless you are sure the filament you've selected can accommodate the extreme heat. This design is offered with NO warrant of safety or liability. If you choose to print/install this…
These 3D printed fixtures allow for the mounting of a Festool Domino DF500 floating tenon joint cutter to a Festool MFT table or similar table with 20mm diameter bench dog holes on a 96mm x 96mm grid spacing. A stepped block is also…
I never have had much success in gluing PETG together for structural reasons, so I have designed this really simple clip to supplement the holding strength. Thanks for the original designers of both the U-Channel mod and original LED…
Not much documentation on this one except to say that you'll need M5 hardware at whatever length you want for the strap clamps. The threaded Inserts in the fixture plates are meant to be 10mm The Eccentric Nut (the Mitey-Bite inspired…
This fixture can be placed on your desk or mounted on a wall and can be lit up by placing LED strips inside the fixture and bringing the according power to it. I used a dimmable 3K 7W 5V 1.4A COB style LED Strip Light Assembly : Print the…
After printing the parts for a floating tensegrity table (see the remix source) and assembling the hardware, I realized that I wasn't looking forward to trying to thread this and get the right estimated lengths before tensioning. So, I…
This knob is for a dado jig that I'm building. It allows clamping of the two parallel boards that guide the router. It uses a 5/16" carriage bolt and nut. the nut is pressed into the cavity. It should be tight as is but can be glued if…
Reduced thickness (and stability) of the spike for a faster print time and less material while maintaining the original footprint. STEP file available. Original model credits go to Tueftler
Print in a contrasting color to your M5 plugs for easy identification.
Dual Business Card Engraving Jig – For Fiber Laser Setups Looking to engrave business cards more efficiently? This dual-position jig is the perfect solution for streamlining your workflow and achieving consistent, professional results.…
This is made so you can acess your hotend and heatbreak easily Note: Print in PETG or ABS. Pla is not recommend on this one! You wont need any extra screws, maybe a glue to attach the new fan duct on your blower fan. Category: 3D Printer…
This is a fixture for measuring runout on router bits and collets on the Makita RT0700 router. The long neck of the fixture makes it possible to measure the router spindle shaft itself, as well as long bits and extensions/adapters…
Simple fixture for screwing down connectors between LED strips with 3.5mm holes Instructions: Print with 0.4 mm nozzle No supports Print with Cura Bridge Settings
I created this fixture to store and/or test the fire control group (trigger/hammer/sear/safety) for AR-style receivers. It can be used for troubleshooting issues, and for training purposes to demonstrate how the parts all interact. I've…
Single point paddle fixture for fiber lasers.
Requires two M3x30 (or 35) bolts and hex nuts and whatever hardware you want to use for attaching the dial indicator. Snug down on the pin just until it stays put but don't crank it down. Options for the pin that the wheel rides on: I…
Simple Fixture to mill custom PCBs. Uses M3 hardware to secure fixture to machine table, and Copper Clad snug for milling operations. Printed in Generic PETG using 0.2mm Layer Heights - Approximate time 4 hours.
These connectors attach to a Skadis accessory using simple mounting holes. I chose this approach for slot connections as it offers a number of advantages: It makes accessory design simpler - in most cases, accessories can be printed…
Intro I was looking for 6 lampshades, but the store had only 2 in stock, but they had a lot of sets by 3 of the same lampshades but on the rail. I then needed to buy a ceiling fixture cup, but I thought that I'd better design and print 6…
Overview The timelapse feature of OctoPrint is one of the main reasons I set it up on my printer. But, the image quality can be somewhat limited to what a webcam can provide. So, with some inspiration from other creators online, I…
This fixture holds 6 metallic strips, such as copper or nickel, to surround a part to be electroplated. The metallic strips are connected by a wire to form one electrode, and are held in place by 6 set screws. A hole in the middle allows…
