Search results: flange

Sort order

642 models

P
PrintablesAdam

Pipe flange (escutcheon plate) in various sizes

This is a decorative pipe flange (escutcheon plate) that fits around a water or drain pipe and conceals the larger diameter hole it goes into. It prints in two parts that fit together for a clean look. Note that the connection is not…

Downloads
403
Likes
40
Rating
5
P
PrintablesJib

Quick Disconnect - Flanged - Duct Adapter for Ventilation

Project Summary: Using this to adapt to a hopper window insert for venting my resin printer in a grow tent. My Print Settings: 20% gyroid infill .2mm height Support from build plate for flange half (connection studs) Printed with PLA

Downloads
131
Likes
32
Rating
0
P
Printablesbattlefrog

98mm Exhaust Elbow w/Backflow Valve and Flange

This version of the 98mm elbow includes a backflow valve, flange coupler band and lock. These files include proper settings to print as they are. No tools necessary. Printed with PLA on a Prusa MK3S+ with a .4mm nozzle and .3mm resolution.

Downloads
52
Likes
7
Rating
0
P
PrintablesMaxGyver

ODRIVE S1 D5312s 330KV flange mount

The mount is designed to use the Odrive S1 heat spreader. It aligns the motor shaft with the magnetic encoder and leaves a 1mm gap between the magnet and the encoder. A 6mm diameter an 5mm thick magnet sold in the Odrive shop is used. The…

Downloads
49
Likes
2
Rating
0
P
PrintablescSandra

Square flange for aluminum square tubes with 1.6 mm walls

The inner portion of the original flange was prone to breaking at the 90° angle on open carts with casters over 30". I made slots for 4 steel pins to serve as reinforcement.

Downloads
32
Likes
6
Rating
0
P
PrintablesJacob

Flanged Bump Connector

Compliant connecting mechanism that I presently don't know the proper name for. Print in PETG or ABS/ASA. I would not recommend PLA. Fusion 360 CAD file attached to edit thicknesses for different materials.

Downloads
28
Likes
7
Rating
0
P
PrintablesJinieren

Focusrite Scarlett 2i2 Flange Knob (4th generation)

The Focusrite Scarlett 2i2 (4th gen) has a circular volume LED around the input 1 and 2 inputs. At the time of this file's creation, there is no software solution for disabling it. This knob was designed to block out that light. This knob…

Downloads
21
Likes
1
Rating
0
P
Printablesmacsddau

K8200 Upgrade 2 - Planetary flange

This is my 2nd upgrade of the K8200 3D Printer. It will transform this printer as a Prusa Mini. Part 000427 : Planetary flange

Downloads
15
Likes
1
Rating
0
P
Printablesdodasch

Waterpump Festo Adapter (G1/8 to 13mm Flange)

Designed for Seven Master EB-303 Water Pump AC:220V/50Hz 10W Hmax: 1.2m Qmax: 600L/H From 13mm Flange to 1/8" Thread (for Festo Adapter) Edit : added Adapter with key width 14mm

Downloads
14
Likes
5
Rating
0
P
PrintablesSi1verEag1e

A Familiar Flanged Mace

A replica/cosplay prop of a 15th century blunt weapon that might be inspired by a flanged mace wielded by a certain historical figure who had a vision problem and was famously portrayed in a quite recent video game. Also works as a back…

Downloads
14
Likes
4
Rating
0

Dessicant Box - Prusa Spool without Flange - AMS-Lite

Update: Separate body and lid files uploaded This is an update to https://www.printables.com/model/2934-desiccant-container-prusament-filament-spool for ABQJammer on Thingiverse. It is updated so that the internal diameter is now 20mm…

Downloads
2
Likes
0
Rating
0
P
PrintablesFormFutura B.V.

ReFill 2.0 - Flanges

FormFutura's ReFill 2.0 is manufactured for usage with re-usable spool flanges and comes on a cardboard core with velcro strips. This improves the material winding and overall coil strength. Our new flanges are designed with minimum…

Downloads
2,500
Likes
328
Rating
4.96
P
PrintablesRepkord

RackRoller: Open Source Flange Roller Add-on For RepBox 2.3.1+ and RepRack System

Optional upgrade for your RepRack or RepBox storage systems. Add a flange rollers to your slip rod setup for enhanced rolling as needed. Print directly from your RepRack or use in a standalone configuration. Snap fits cleanly over slip…

Downloads
2,264
Likes
558
Rating
4.95
P
PrintablesAttaxika

FlashForge AD5X Anycubic Spool Adapter (Flange Update)

I noticed that the IFS wouldn't grab onto the spool correctly when I was using Anycubic filament I had purchased on Amazon. I decided to create an adapter, which seems to work perfectly and hasn't caused any issues after further prints.…

Downloads
1,698
Likes
138
Rating
4.86
P
PrintablesMax

Vacuum hose flanges to connect to flat surfaces.

Vacuum hose flanges to connect hoses of all common sizes to a flat surface. All adapters have: Sizes are for the inside of the hose (outside of the adapter) 20mm long connector at each end 6 screw holes with 5mm diameter Wall thickness of…

Downloads
1,135
Likes
233
Rating
5
P
Printablesthall72

Lego Compatible (3713.dat) Technic Bush with Two Flanges

This model is compatible with the lego system.

Downloads
864
Likes
63
Rating
0
P
PrintablesNastra

Creality K1 Flanged Bearing Gantry by „BootyCall Jones“ with D3vil Logo

A K1 and K1 Max full gantry redesign utilizing flanged bearings in place of the low quality factory idlers.

Downloads
801
Likes
168
Rating
4.75
P
PrintablesDraftYeti

Guitar Jack 6.35mm (1/4") Flanged Nut

I printed mine with a 0.08mm layer height and the threads fit wonderfully, it threads on nice and smooth and tightens well. The external dimensions of the nut are the same as the ones that come on the jacks so you can use the same socket…

Downloads
659
Likes
68
Rating
4.33
P
Printablesknoopx

TR8X8 8mm Flange Lead Screw Trapezoidal Nut

This is an accurate recreation of the Prusa MK3 POM TR8x8 and probably other printers (other ones I tried from thingiverse didn't match the lead pitch). I print them in PLA and use them in a MK2 clone I have lying around, they work…

Downloads
633
Likes
19
Rating
5
P
PrintablesIvah Sukhikh

Creality K1 Flanged Bearing Gantry Project Remix

The motormounts in the photo are slightly different, they are the old version. The attached files contain all models of the current version at the time of publication.

Downloads
607
Likes
146
Rating
5
P
PrintablesJack

G½ flange nut - BSW 1/2 G1/2

Flange nut for faucets or pool hose/filter (flange ∅ OD = 38mm)

Downloads
564
Likes
44
Rating
5
P
PrintablesDeGnoss

Customizable Duct Flange

Customizable Duct Flange (OpenSCAD) Create your own duct flange with this highly customizable OpenSCAD script. This design allows for both circular and square face shapes, making it suitable for a wide range of applications. Features :…

Downloads
563
Likes
69
Rating
5
P
PrintablesFormFutura B.V.

ReFill - 2kg Master Spool - Flange

This model work only with the OLD version of ReFill. If you have recently purchased ReFill products with the cardboard core, please download the updated flanges HERE ReFill is manufactured for usage with re-usable master spools like in…

Downloads
557
Likes
33
Rating
4
P
Printablesobri

120mm Fan duct 90 degrees two flanges

A 120mm fan duct for 90 degrees mount. I use it for my Alveo3D filtration system, but it should fit to any standard 120mm fan. The pipe has 0.8mm wall, which is not super sturdy, but works well and saves filament. See the dimensions if it…

Downloads
552
Likes
64
Rating
0
P
Printablesbaer

1/4-20 Flanged Nut

Print flat side down at a decent layer resolution and you're good to go. Probably wouldn't recommend PLA seen as it might crack under heavier use. Needs some force to screw in first time because I added next to zero tolerance so it's as…

Downloads
541
Likes
31
Rating
4.67

Centauri Carbon Fan Intake/Exhaust & Noise Suppression Flange Plate

This is a generic flange plate. It may be used with other systems to extract fumes or to bring in cooler air for PLA/TPU, etc. One side effect of having this installed is that it does quiet the especially loud aux fan to an extent. It's…

Downloads
492
Likes
113
Rating
0
P
PrintablesStasMan

Creality K1 Flanged Bearing Gantry (FBG) Project Remix with new X and Y carriages

Unchanged and added for the kit: higher_tensioner_spacer, interbearing-washer, lower_tensioner_spacer. The X-axis carriage is based on a CAD model from Henlor -https://makerworld.com/en/models/171995 The X-axis carriage with an oval hole…

Downloads
476
Likes
129
Rating
5
P
PrintablesObiWanJabroni

Duct Flange - Fits 120mm PC Fan Profile and 4 inch AC Duct

Flange that can be mounted onto a 120mm PC fan and then interface with a 4in" AC duct in order to vent heat and fumes outside. I am using thinkingalaud's original model for the flange that faces outside, but needed to remix their model to…

Downloads
473
Likes
59
Rating
5
P
PrintablesKomitadjie

4" Dust Collector Flange

This is just a very simple flange I created for a shop project, to attach a 4" dust collection hose to a flat object. In my use it was a downdraft table built for a disk sander, but it should be useful in any similar application. I…

Downloads
466
Likes
50
Rating
5
P
Printablesdstarke

PolyTerra Spool Flange

It improves unwinding as it improves the spool edge smoothness and stability. Simply put one on each side of the spool. No glue needed. You may want to add a clip or screw at the holes if it fits too loose.

Downloads
451
Likes
40
Rating
5
P
PrintablesMorten.Kolve

M65 Helicoid Lensboards and mounting flange

Needs to be printed with 0.1mm layerheight or better. 1 June 2025: added “M65Front_Copal_GENERIC v1” both as STEP and f3d files + “M65_flange” as STEP. for easy modifications.

Downloads
440
Likes
52
Rating
5
P
PrintablesTlang93

Hydraulic flange covers

These are used to seal hydraulic flange fittings while performing a repair. They help to keep oil in and contaminates out. There is -12, -16, -20, -24 and -32 sizes available, These should all be able to be used with code 61, 62, and Cat…

Downloads
429
Likes
16
Rating
5
P
PrintablesFormFutura B.V.

FormFutura ReFill Flange Connector

Introduction: ReFill PLA is manufactured for usage with re-usable master spools. Print your own spool. This filament reduces your carbon footprint significantly as packaging waste is reduced to an absolute minimum. Find out more about…

Downloads
414
Likes
41
Rating
5
P
Printablesthinkingalaud

Duct Flange

My enclosure has a built in fan over an opening. I wanted to be able to control where it vents out to (a nearby window), so I purchased 4in ducting on Amazon . In order to secure the ducting in place, I designed and printed this. It is…

Downloads
391
Likes
44
Rating
5
P
PrintablesSuchtzocker

grow tent duct flange with light baffle insert

Hello, please make shure to print the duct port first and measure the inside diameter to scale it with your slicer settings! Its made to fit 150mm hoses / 6 inch duct hoses and clamps In the original drawing the insert has a clearance of…

Downloads
345
Likes
39
Rating
0
P
PrintablesJeff Hengesbach

4 Inch Duct Flange

Simple 4 Inch Duct Interface plate. Originally made to create a Tee box for printer exhaust ducting.

Downloads
342
Likes
39
Rating
5
P
Printablesthall72

Lego Compatible (6590.dat) Technic Bush with Two Flanges

This model is compatible with the lego system.

Downloads
331
Likes
34
Rating
0
P
Printableslolsborn

3/4" PVC Flange

Flange for flush mounting 3/4" PVC. I use it for making air flags for quad racing using dollar store pool noodles. Category: Household

Downloads
304
Likes
50
Rating
4
P
PrintablesBasementLAB

Offset Flange Pipe & Fittings Ø 10 / 12 / 13 / 15 / 18mm Collection

Offset Flange Structural Pipe & Fittings Ø 10 / 12 / 13 / 15 / 18mm Collection Slip-on connection Resize to adjust dimension - If you download/enjoyed this file, please leave a like - Thks Update: 27/12/2024 added Single tab version All…

Downloads
299
Likes
50
Rating
4
P
PrintablesFilamentix

Hundreds of Metric Hex Flange Bolt Screws with Fine Pitch Threads M1 up to M64

These screws are inspired by DINE6921 metric screws with hex flange head and they have metric fine pitch threads . The longer screws have partial threads. My inproved thread design has an accuracy of 2.5µm and should fit without…

Downloads
287
Likes
80
Rating
5

PVC Cat Tree Flanges and Brackets

PLA and PETG are fine for these, ABS and ASA can be solvent welded to the pvc pipes with appropriate solvent, use flat head fasteners either construction, wood screws or machine screws.

Downloads
285
Likes
212
Rating
5
P
PrintablesHeavydutydan

Code 62 Flange plug

These are Code 62 flange plugs for blocking off open ports on hydraulic systems on heavy equipment. They're lightweight, easy to print, and great for keep dirt out of your system while working on it, or stopping oil flow after removing…

Downloads
283
Likes
14
Rating
5
P
PrintablesEsen Baytekin

Elegoo Saturn 4/4Ultra Ventilation Flange and fan Bracket

Elegoo Saturn 4/4 Ultra Ventilation Flange and Fan Bracket In poorly ventilated areas, resin can become unpleasant and unhealthy. This model allows you to attach a 60x60 fan to the accessory port and quickly vent fumes using a 50mm…

Downloads
282
Likes
32
Rating
0
P
Printablesdeadsy

Parametric Pipe Flange

I needed a pipe flange with a square base, so I designed one. Glue a piece of plastic pipe into it and mount it to something else. The design is parametric and can be adjusted to match individual requirements. Note: This is not OpenSCAD.…

Downloads
268
Likes
31
Rating
0
P
Printablesaard

Flange rollers for Repbox 2.3.1+

Newer repboxes don't come with spool holders, but use a slip rod - which has way too much friction. Repkord has a spool roller model to fix that - but it takes way too many screws to assemble, is still rather wobbly without adding even…

Downloads
265
Likes
50
Rating
4.43
P
PrintablesSeb

Flange roller Add-on for (Un)original Prusa Drybox

This is an Optional add-on to the (Un)original Prusa Drybox. Simple rollers, using 608 bearings, that fit with the 18mm aluminium rods of the Drybox. Note : All the files are also available for 20mm rods as an option. The filename…

Downloads
260
Likes
40
Rating
5
Downloads
255
Likes
34
Rating
0
P
PrintablesHeavydutydan

Code 61 Flange Plug

These are Code 61 flange plugs for blocking off open ports on hydraulic systems on heavy equipment. They're lightweight, easy to print, and great for keep dirt out of your system while working on it, or stopping oil flow after removing…

Downloads
247
Likes
8
Rating
5
P
PrintablesJEBurroughs

Ender 3/Pro/V2/Voxelab Aquila - Z-Axis Stabilizer using 616mm GT-2 Timing Belt and F688ZZ Flanged Ball Bearing

I haven't done much printing, but I found that neither of my printers care for having the timing belt system going. They were both printing like crap, so for an acid test I took this off both any they started printing great again. So at…

Downloads
247
Likes
46
Rating
5
P
PrintablesMaker404

4 inch Dust Collector 45 degree Elbow Dust Collection with flange

45 Degree elbow for 4" dust collection systems. I use this piping for dust collection with a flange to mount to a box I am using as a planer stand but it should be useful in any similar situation. The flange hole was modeled after a PVC…

Downloads
246
Likes
28
Rating
0
P
PrintablesHeavydutydan

Caterpillar Flange Plugs

These are Caterpillar-specific flange plugs. For blocking off ports while servicing hydraulic systems. Sizes -12 to -32. A groove for an o-ring is there as well. Great for capping off open ports on control valves while you service…

Downloads
245
Likes
15
Rating
0
P
PrintablesHabit

Airbox flange to 3" (MAF delete) for Nissan S13 Ca18det

Airbox flange to 3" (MAF delete) for Nissan S13 Ca18det

Downloads
241
Likes
20
Rating
5
P
PrintablesGracro

20mm Flex Conduit Flange

This is a snap on flange to terminate 20mm (nominal) flexible corrugated conduit flush with a surface- i.e. drywall/plasterboard. I made this so I can run the speaker wires to my rear home cinema speakers through the walls inside conduit.…

Downloads
239
Likes
37
Rating
5
P
Printables3dAllison

E3D Revo Micro M12 Flanged Hex Nut

Somewhere between changing between version 1 and, version 2 - and back again - of the E3D Revo Mount for the Prusa Mini, the M12 flanged nut went missing. Personally, I think one of my cats decided to bat it around - this one probably -…

Downloads
226
Likes
16
Rating
5
P
PrintablesMarkus

Creality K1 Flanged Bearing Gantry Remix

Bearing conversion of the axle to reduce vibration. It works very wellIf you want to use a linear rail you have to use the XY joint from here. https://www.printables.com/de/model/855093-k1k1max-x-axis-linear-rail-remix/files

Downloads
221
Likes
51
Rating
0
P
Printablesp.frentzel

Deutsch DT receptacle flange adapters for panel mounting

TBD soon: Upload pics of finished installation I wanted to use DT plugs/sockets for an electronics enclosure. Flanged versions are available but not as common. Also, cutting square holes into panels sucks. My version is meant to be…

Downloads
220
Likes
15
Rating
0
P
PrintablesFilamentix

Complete Set of Metric Hex Flange Nuts M1 up to M64

M1, M1.6, M2, M2.5, M3, M4, M5, M6, M8, M10, M12, M14, M16, M18, M20, M22, M24, M27, M30, M33, M36, M39, M42, ..., M64

Downloads
217
Likes
27
Rating
5
P
Printablesltlowe

Tray for Flange Toilet Plunger

This is a tray for a 6" flange style toilet plunger with 3" to 4" flange. The main part of the plunger sits on the fins with the flange held slightly off the bottom. I printed mine in PETG with a 0.6m nozzle at 0.3mm layer height with 10%…

Downloads
217
Likes
28
Rating
5
P
Printablessourekv

Original Prusa i3 MK3 X-axis motor cable strain relief - flange

Original Prusa i3 MK3 X-axis motor cable strain relief with added catch on motor flange. !Not compatible with Bear Upgrade! originally: https://www.thingiverse.com/thing:3433554 remixed from: https://www.thingiverse.com/thing:3216603…

Downloads
216
Likes
25
Rating
4.92
P
Printablessternli27

servo mount holder flange mounting feet

I changed a few things Holes in the ground, rather than on the side Some radii in the corners and cable holes shoud work with any medium rc servo Print Settings Printer: diy delta Rafts: No Supports: Yes Resolution: 0.3mm nozzle Infill:…

Downloads
214
Likes
9
Rating
0
P
PrintablesBasementLAB

Wall Split Flange Cover Slide-in - Pipe Collar / Copritubo per idraulica

Wall Split Flange Round Escutcheon Plate Cover for Various Pipes / Pipe Collar / Copritubo per idraulica Pipe Ø: Ø 20.7mm/ 0.81 inch Ø 25.8mm/ 1.1/2" Ø 29.9mm/ 3/4" inch Ø 33.7mm/ 1" inch Resize to adjust dimension If you download/enjoyed…

Downloads
211
Likes
30
Rating
4.5
P
Printablesn9dmt

1.5in PVC Floor Flange

A floor flange for 1.5in PVC pipe. Designed to be used with M4 hardware. Support ring included - I used this flange for a mushroom grow tent, so having a backing ring was helpful.

Downloads
211
Likes
24
Rating
0
P
Printablescnorton9494

M10x0.5 Flanged Nut

M10x0.5 flanged nut to fit on the backside of a Bowden tube fitting. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 200 Infill: 25 Filament: Overture PETG Black Category: Parts

Downloads
211
Likes
11
Rating
0
P
PrintablesPablo Fernandez

Pipe bracket with flanges, in all sizes

For a project at home I needed a bracket for a water pipe. Instead of spending an hour to go to the shop and buy some, I spent months designing a lot of variations, and eventually learning Autodesk Inventor so that I could use iParts to…

Downloads
206
Likes
42
Rating
5
P
PrintablesZortium 3D

Rod Flange (Fully Parametric)

This parametric rod flange is able to fit any rod you throw at it, just make sure to fasten it securely and bump up those perimeter numbers. Features! Countersunk holes (90°), specify any size like 4mm for M4 (and so on…), the model adds…

Downloads
205
Likes
62
Rating
0
P
PrintableslemmingDev

MMU3 Printable Flange

I didn't have any GT2-16 idlers or metallic flanges to connect the motor to the idler, so I whipped this up in Inventor. Uses a captive square nut to keep an M3 bolt flush against the motor shaft flat spot. You'll have to orient the model…

Downloads
201
Likes
39
Rating
5
P
PrintablesFitangano

Wide Flange W H Steel Beam HP

Feel free to extrude the length you need.

Downloads
197
Likes
7
Rating
0
P
PrintablesAlien3D

RackRoller: Alien3D Remix of Open Source Flange Roller Add-on For RepBox 2.3.1+ and RepRack System

I wanted rollers where the bearings were a bit wider apart as I had a spool pull off when they're closer together, also doubled them up for spools next to each other on the RepRack to feed the Palette. I used 8x20mm metal pins (Amazon aff…

Downloads
191
Likes
51
Rating
5
P
PrintablesSven

AC Window mount Flange/Bushing with Hose Adapter (125mm)

I converted my monoblock AC to two hose operation, for this i needed a quick disconnect adapter to mount on my plastic window insert that already houses the exhaust hose of the AC unit. This works beautifully.

Downloads
188
Likes
24
Rating
5
P
PrintablesSimple3D

Makerpipe Hinge Flange for EMT Pipe

Makerpipe ( https://makerpipe.com/ ) is this fun Kickstarter that makes connectors that allow you to use inexpensive EMT (Electrical Conduit) for creating things. It's kinda like having an Erector Set for adults. I hope they plan to…

Downloads
187
Likes
45
Rating
0
P
PrintablesB4rt0

Qidi X-Plus/Max 3 Spool Holder Cap - enlarged flange - no dryer box lid - single or 2 part

This is my model of Qidi X-Plus/Max 3 Spool Holder Cap with enlarged flange which allows use of dryer box without the lid or without the box at all. It's useful when you want to print without the lid or like in my case you have wider…

Downloads
187
Likes
26
Rating
5
P
Printablescologne91

Flange bushing Form V

Sie können es als Platzhalter, Ersatzteil oder zum Konstruieren verwenden

Downloads
183
Likes
8
Rating
5
P
PrintablesPetr Macháček

Příruba 100mm/Flange 100mm

Česky Příruba 100 mm – montážní adaptér Jednoduchá a pevná příruba pro nasazení 100mm potrubí, flexi hadice nebo ventilátoru. Základna obsahuje 4 montážní otvory a válcový nástavec přesného průměru. Ideální pro ventilaci, dílnu, growbox…

Downloads
182
Likes
21
Rating
0
P
PrintablesTheCafeRacer

CREALITY FALCON 2 EXHAUST FLANGES - 80MM

I didn't like how the Falcon 2's exhaust fan mounts to the fabric of the enclosure. I wanted a flange to sandwich the fabric and provide a more sturdy mounting point. 2 types of flanges you can run in various configurations for getting…

Downloads
179
Likes
14
Rating
5
P
PrintablesPeter Farell

Venus Figure ofLangenzersdorf

Venus Figure ofLangenzersdorf

Downloads
178
Likes
44
Rating
5
P
Printablesviksangen3d

1 inch flange wallmount

A flange with 4 holes for screws that fits my one inch pipe models and fittings. Perfect for making an industrial looking lamp maybe or connecting more to make a small shelf. I would love to see what you make of it!

Downloads
175
Likes
56
Rating
0
P
PrintablesHD_Creator

Water tap G1 thread to flange adapter

If you want to connect a garden hose to any kind of water container, this adapter is what you need.

Downloads
174
Likes
38
Rating
0
P
PrintablesAl Williams

Flange for 3 inch vent hose

I needed a flange to pass a 3 inch vent hose from my laser cutter to the outside.

Downloads
174
Likes
10
Rating
5
P
Printablesviksangen3d

3/4" flange wallmount BSP thread

A pipeflange to screw to the wall, tabletop or similar. ¾" BSP pipethreaded and fits nicely with my other ¾" models.

Downloads
169
Likes
53
Rating
0
P
PrintablesKOSERO

La Pavoni boiler flange / nut / ring Remover (For the 31104702)

A custom tool designed to remove the boiler flange nut/ring on La Pavoni machines (part no. 31104702). Perfect for safe and easy disassembly without damaging components. Printed in PETG (0.4 mm nozzle, 0.3 mm layer height, 5 wall loops,…

Downloads
160
Likes
9
Rating
5

Desiccant Box - Prusa Spool with Flange

Do you want to modify a design and don't know how. We can help and often work for free, email us to ask. See the contact details on our webpage. For more of my designs check out my website: https://3domengineering.com.au Don't forget if…

Downloads
159
Likes
27
Rating
5
P
Printablesakamaka

Toilet - Floor Flange Bolt Cover

Simple toilet base bolts thread on cover so it no longer falls off when I clean the floor. Category: Bathroom

Downloads
157
Likes
16
Rating
5
P
PrintablesCalicat

Closet / Wardrobe Rod Mounting Brackets / Flanges - 1", 1 1⁄4", 1 3⁄8" (3 sizes)

Brackets are in pairs, each one a mirror of it's partner so they can be installed with the lock-screw hidden on the backside. Printed in ABS, 3 walls, 15% infill, no support needed. Using mine to mount a short closet rod (4') that will…

Downloads
153
Likes
16
Rating
0
P
PrintablesBigDee

50 mm hose/pipe adaptor with flange

I needed a 50 mm hose adapter with flange and ended up with this design. You can save some significant printing time if you set the infill pattern to "concentric". I also created a 1 1/4" thread to 50 mm Adapter to connect my side channel…

Downloads
153
Likes
9
Rating
0
P
PrintablesNarack

4 inch flanges

I needed a flange for an airbrush spraybooth I was building. I designed a simple 4 inch flange and accompanying backing plate to mount to the vapor chamber. I used M6 bolts and embedded the nuts into the backing plate. This is my first…

Downloads
153
Likes
19
Rating
0
P
Printablesdancan13f

Subaru EJ20 (13/16) / Turbo Oil Drain Flange add-on

This is the Turbo Oil Drain Flanges for the EJ20 Subaru Engine ( http://www.thingiverse.com/thing:2451310 ); the turbo is available with this original model ; all turbo STL files are in the ZIP file…

Downloads
152
Likes
24
Rating
0
P
PrintablesEel River Coral

esp32-case by Mihai remixed to include mounting screw hole flanges

I added some screw holes on flanges of the base model to Mihai's awesome model. I used fusion 360 but I hope to someday be proficient enough to redo this in OpenSCAD. Fusion file is included and STL for the bottom, the rest of the parts…

Downloads
146
Likes
18
Rating
0
P
PrintablesT-Fork

xv750 airfilter flange

air intake flange for Yamaha xv750 Virago 81-83, should work for later models too afaik. Category: 3D Printing

Downloads
143
Likes
7
Rating
0
P
PrintablesFilamentix

Hundreds of Metric Hex Flange Bolt Screws M1 up to M64

These screws are inspired by DINE6921 metric screws with hex flange head and they have metric standard pitch threads . The longer screws have partial threads. My inproved thread design has an accuracy of 2.5µm and should fit without…

Downloads
143
Likes
30
Rating
0
P
Printablescharlescho

Toilet Flange Bolt Screw Cap Cover

This just screws onto your protruding toilet flange bolt. Print with flat side on bed. No supports needed.

Downloads
137
Likes
15
Rating
5
P
PrintablesBiomushroom

Flange Maker

A little OpenSCAD project to design FLANGES without hassles. Category: Parts

Downloads
136
Likes
11
Rating
5
P
PrintablesRyan

Pipe Flange for 3/4" Copper

A Pipe flange to hide larger holes around pipes. Print instructions Easy Print no support. Will be snug when complete requiring no glue for final assembly.

Downloads
132
Likes
18
Rating
4.67
P
PrintablesKowa

Connection flange 150mm

The connection flange is for a wall breakthrough 250mm x 200mm to connect an aluminum flexible pipe with a diameter of 150mm _______________________________________________ Der Anschlussflansch ist für einen Mauerdurchbruch 250mm x 200mm…

Downloads
131
Likes
16
Rating
0
P
Printablesetesch

Creality Laser Enclosure Flange

3" OD Flange I created to attach the hose from my Creality Laser Enclosure to a board so I can vent out a window.

Downloads
130
Likes
16
Rating
5
P
PrintablesWill

Simple 100mm Duct Flange

I needed to attach a 100mm hose to a spray booth filter hole for airbrushing. This is what I came up with after three minutes in FreeCAD. I designed it to be glued to the booth outlet and fitted to the hose using friction fitting and…

Downloads
127
Likes
9
Rating
0
P
Printablesthall72

Lego Compatible (6211.dat) Spiral Tube with Flange

This model is compatible with the lego system.

Downloads
126
Likes
20
Rating
0
P
Printablescclontz

608 Bearing Flange

Created in Onshape, this flange was designed to mount a 608 bearing in and secure it to a board. I needed to have a rod pass through a board and use a bearing to spin. These were used in creating a Christmas display and held up to a whole…

Downloads
126
Likes
13
Rating
0
P
PrintablesLeiher3D

Elegoo Phecda - Enclosure Fan Flange

A flange for the fan/tubing that is provided with the Elegoo Phecda enclosure.

Downloads
126
Likes
21
Rating
5
P
Printablesaard

Double flange rollers for Repbox 2.3.1+

Assembly instructions are mostly the same as for the single version ( https://www.prusaprinters.org/prints/134806-flange-rollers-for-repbox-231 ), you just need to print the additional 2-part spacers for in between the bearings as well.

Downloads
125
Likes
25
Rating
5
P
PrintablesCYUL

Competition Pro C64 Joystick with flange and strain relief

Another remix of the brilliant Competition Pro Joystick by maciek717 . This one does not suffer from the deformation other remixes have. I am using these uxcell Rubber Strain Relief Cord Boot Protector Sleeve Hose 34x9x6mm 10pcs that I…

Downloads
125
Likes
15
Rating
0