433 models
Windmill - 100% printable - no support - no bearings - low friction - video Complete printable windmill which is easy to assemble and expandable with other parts. You need a screwdriver for assembling? Dimensions Length 127 mm Diameter…
Designed this endcap for PVC tubes to transport posters & D&D maps. Take any old PVC tube, cut it to your desired length, and put these caps on each end! This model is designed for 40mm outer diameter tubes, but you can always just scale…
Overview For a video tour of this tower setup, please visit this reddit post . In this video I explain how this quick-release system works along with some of the other upgrades that I have made for my Prusa i3MK3S+ with MMU3! (: This new…
This Filament Spool Ring (Alzament) is a simple and effective solution to reduce friction inside filament spool hubs , especially for cardboard spools. The ring is designed to be clipped directly into the spool hub and secures itself…
Ein weiterer Y-Adapter für das 4mm PTFE Rohr, mit Innengewinden. Einfach zu drucken. 0,2 mm Schichtdicke. Achte auf die richtige Ausrichtung und die erste Schicht im Kanal, sodas die erste Schicht im Kanal in Zugrichtung verläuft dann…
Windmill XL - 100% printable - no support - no bearings - low friction - video Complete printable windmill which is easy to assemble and expandable with other parts. You need a screwdriver for assembling? Dimensions Length 127 mm Diameter…
This model is compatible with the lego system.
I have very much been enjoying the Playing Card Shuffler V3 by @LukasCenovsky Find it here < Playing Card Shuffler v3 by Lukas Cenovsky | Download free STL model | Printables.com > As with many innovative solutions there can be…
Easy to print friction welding tips for your Dremel! No Supports needed and is a great project to use for your left over spools of filament you have laying around. 100% infill .28 layer height Print flat with a brim Attach to the tip of…
This model is compatible with the lego system.
Windwheel - 100% printable - no support - no bearings - low friction - video Complete printable windwheel which is easy to assemble and expandable with other parts. You need a screwdriver for assembling? Dimensions Diameter 176 mm…
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
Updates May 22, 2022 added dual version of insert-empty Simple remix of the original insert-empty (single and dual) to remove 3 of the 6 tabs to reduce friction and hopefully improve insert / removal with the honey comb wall.
Windmill Toroidal - 100% printable - no support - no bearings - low friction - video Complete printable windmill which is easy to assemble and expandable with other parts. You need a screwdriver for assembling? Dimensions Length 137 mm…
Hi! This windwheel works wonderfully and because its fully ball beared the slightest breeze is enough to make the wheels spin fast :) Printing: -Parts are constructed that everything is very easy to print even on old 3D printers and not…
Allows you to side mount your spool on the 5M Pro. I have also included STLs for 3 different brackets as options. This can allow you to mount it higher or lower depending on the spool size. Remember this design is made to utilize 608…
This model is compatible with the lego system.
This model is compatible with the lego system.
(This mechanism is used in the following designs: https://www.printables.com/model/658410-folding-pocket-phone-stand ) /**** Update: I've found that a square shaft works better. You can use an 8mm diagonal square shaft, and print it…
Windmill XL Cross- 100% printable - no support - no bearings - low friction - video Complete printable windmill which is easy to assemble and expandable with other parts. You need a screwdriver for assembling? Dimensions Length 127 mm…
I really like the low friction spool holder for my A1 Mini and wanted a similar one for my new Elegoo Centauri Carbon. I remixed some great designs into a low friction mount that will do the job. All parts can be printed on the Centauri…
With the original make the box wouldn't close for me on it's own because the box was creating friction with the tail and the cat's nose was getting stuck on the box. Only the box changed so if you printed the original version you only…
A simple, durable, and fully 3D-printable roller latch system. Perfect for keeping cabinet doors, drawers, or lightweight enclosures securely closed. The set includes both single and double receiver options. Printing Guidelines: Material:…
This model is compatible with the lego system.
A hand tool to facilitate inserting magnets into Gridfinity stuff. Insert the magnet into the bottom of the handle, use pliers (or anything pointy) to push the magnet all the way in the back. I've included two handles with “BASE” and…
This model is compatible with the lego system.
This model is compatible with the lego system.
Started to explore a roller bearing for integrating into a single-print-in-place fidget spinner (see https://www.thingiverse.com/thing:4876658 ). After looking at a few 608 bearings from Thingiverse (see below for references) decided to…
Added a hole for a M4 Nut to the Guide and a hold for a M4 bolt to the Brace. You will also need two 608 bearings (can also be found in old skateboard/longboard wheels) These are the ones that I used -…
This is a Remix of the AM M5 Frictionless Filament Holer from runswithspoons. Removed the Screwhole and added Sidewalls to the Upright Holder. Now the filament holder can simply be placed on the vertical piece and does not require any…
I searched for a spool holder that was fully 3D printable and low friction and couldn't find what I wanted. So I designed my own. This one presses together, so no glue is necessary. This is for a standard 1 KG spool (20 CM diameter x 6.5…
Genuine Sovol filament sensor is causing lots of friction. Actually so much that in some cases the print quality is seriously affected (printed layers are not consistent). This happens due to faulty design of the sensor itself and also…
This is a modification of the roller model that is provided by Flashforge in the part files found on their wiki page. I modified it to work with HugoHuge's universal roller. So the roller and roller guide are directly from him. I only…
After my Bearing and Rolling-Element Experience, this is idea-wise not an entirely new creation. I reduced the contact area between the rings due to an elliptic shape of the outer surface. The clearance between the rings is the same as in…
I needed a decent case for the recent edition of gm328, but did not want to fiddle with screws. Found a good model by machanzar and tweaked it slightly. It should not require any screws now and works with a friction fit. Worst case…
Wanted to make an easy print-in-place , no support friction lock for drawstrings on bags, shorts, etc that would fit 4mm paracord. A few itterations lead me to this. It was a bit of a challenge to keep the size small but still have a good…
Wife wanted a pill box, designed two. Works for what it was designed for. Designed to print at .2mm layer height, haven't tested it at .3 yet.
This is a useable (low) friction ring with 12 mm inner diameter
A small adaptation of the great low-friction bowden/PTFE-tube Y splitter by BlindMaker . This remix adds an M3 slot flange that allows to fix the splitter on the rear side of the Bambu P1S (the X1C should work as well), using an M3*10…
LEGO Compatible 87082-Technic, Pin 3L with Friction Ridges and Center Pin Hole
The Hovering Disk is a 3d printed device, which demonstrates almost frictionless motion. The air coming from the balloon is moving through a small whole to the bottom of the disk. At the bottom it is distributed all-over to all sides.…
Hello, This model reduces the friction which filament spools see when using just normal print-in-place spool holders for the 5M. Those spool holders don't allow for spinning with the spool and eventually get scratched by the spool's…
This is a simple tool I made for my wife to help her keep track of what step she's on while knitting/crocheting a complex pattern. She typically uses her apple watch to keep track of simple projects, but on this one, it has a ton of…
Spool Mate for Ender3 v2 Frictionless rotation Adjustable spool stopper with counterlock Hanging system Supports most spool sizes Ease of printing Drawing dimensions of the hanging system (ender3v2 mount) provided to adapt to other…
This model is compatible with the lego system.
I remixed the spool holder by TheKre8Group ( https://www.thingiverse.com/thing:32204 ) to fit my spools that have a bigger inner diameter and made it larger by ~2cm I also added axis for 608 bearings. I gave the arms of the base a little…
Important Update Alternative, PTFE based, sensor mod is available here: https://www.printables.com/model/488517-mak-sovol-sv06-run-out-sensor-mod-ptfe In my tests the above mod works even better than this one. But please feel free to try…
Results were obtained printing with 0.3 mm layer height on a 0.4 mm nozzle in spiral vase mode. Prints in about 25 minutes. Silver prusament PLA is a nice color match. Enjoy - this is my first designed project, and it worked fantastically…
New and improved last meters of filament? these take 20cm each! New tip geometry. Added bolster for improved stability while printing, depth gauge for insertion and… Look like a tiny sword rack while not in use! use same colour to hide…
Miniatures Painting Handles that just use friction for a rotating platform. (Print with random start and stop points) Should be fine to print with fuzzy skin for extra grip. I use steel striking blanks and fabric tape for miniature…
3D printed tether bow hangers and hitch tenders. 2 different styles of tenders - standard and Distel - with two different inner diameters (0.5" and 1"). The tenders allow you to move the friction hitches on your tethers single handedly.…
Old-style Ekornes chairs had plastic friction matings on each side that allowed the chair to recline smoothly. The parts would break, though. This part replaces each half of the pair that were mated behind the knob. Make sure to sand the…
Holds 30 cards per slot, 150 cards total Lid slots on securely OpenSCAD parameters:
This model is compatible with the lego system.
A simple rim that clips around the outside cardboard spools. Print 2 of these, one for each side. I found that this substantially reduces friction for spools to roll smoothly, resulting in more consistent extrusion. I would recommend…
IMPORTANT: This will not work with Silk PLA, PLA with additives, or other filaments with poor layer adhesion. I designed this parametric tube to store my Dragon Coins, but they ended up working well for regular coins as well. The tube…
Motivation I like doing friction stir welding for 3D prints, but when I was using the classic model on thingyverse, I could never get the tip on perfectly straight. I decided to do my own model, but instead for the 1/8th collet that comes…
If you print TPU with the A1 Mini, the softer the TPU you use, the higher the chance that friction will stretch your filament on its way into the extruder, and that will result in under-extrusion. This will happen even if all other…
I print a lot of PETG and TPU, but I couldn't find something quite like what I needed so I took a bunch of other ideas, chopped them up into little bits, seasoned liberally with magnets, and somehow managed to create something useful in…
This model is compatible with the lego system.
This is a friction-locking hand fan. I designed this because daughter's school has no A/C and there was a heat wave. So I needed something that prints overnight and can resist some amount of abuse. It held up to a class of overheated 6…
This model is compatible with the lego system.
I was using a rear mounted frictionless spool holder on my Flashforge machine. Decided to try moving it to the right side of the printer. Didn't like the other top mounted models I saw. Julien's offset version was a great design as it…
Designed in on-shape print with your normal setting. This switch plate design was inspired by out of darts but I added a peg so that the switch can just click in. You don't even need to use glue with this design. Otherwise, enjoy this…
This is a 60 mm two parts eastern egg. It’s a nice shuttle to hide or gift little gadgets or sweets. It needs a small support for each tip. Check the 3fm for the print settings. PLA, 0.15-0.3 mm variable layer height. Two perimeters work…
I tried this model as I didn't want to use any bearings and screws as most of the solution require. And I was really impressed by how smooth and low friction it is. However it had some problems and artifacts, also shape was not perfect…
I knew this principle from adhesive foam tape guiding. Thought it would be useful for something else. So I applied this technique for the cable guidance of my eV-charger cable. I designed mainly two types: one for ø12mm and one for ø20mm.…
Remix from the Customizeable Filament Holder from HugoHuge (thing:3020026 on thingiverse) Low Friction Spool Holder for the Enraged Rabbit Carrot Patch from the Enraged Rabbit Project. This is a drop in replacement for the standard Spool…
Part No: T2060499 Triumph Friction Ring Print your own friction ring for your bar end mirrors. Works on modern Triumphs.
This model is compatible with the lego system.
I had a Problem that Cardboard Spools triggers the MK4 Load Cell Sensor, because off the high force to unspool the filament. Cardboard spools naturally have significantly more friction than their plastic counterparts. This creates an…
Anemometer for wall mounting. Instructions Inspired by the other anemometers on thingiverse. Easy to make - requires 1 x 8mm bearing - the pictured version was printed using the Replicator 2. Print the following: Anemometer Cup x 3 -…
This model has a number of parameters to customize. These are: LidHeight The ratio body-2-lid vertical seperation InsideWidth / Height / Length As saved, the inside is variable and the outside = (inside + walls). If you want the outside…
608 bearing I designed. Works pretty well and spins easily. Outter diameter = 22m Inner diameter = 8mm Width = 7mm I printed mine with a ender 3 pro with a .6 nozzle at .16 layer height and it works just fine.
Designed to contain “Minimalist Stitch Markers” print. Measures 27x37x13mm Scaling too much will probably cause top and bottom of box to be too thin. (up to 300% should be fine) Stitchmarkers pictured can be printed here:…
The original propeller had a 20-deg overhang, which made it difficult to print without support and brim, or if one wants to print with TPU. The original shaft also has too much contact area which increases friction. I wanted to print this…
Summary Roller spool holder with friction control in multiple sizes This design is a remix of Voron 2.4 spool holder with friction control by deathrow360 with the goal of making it printable without supports. The bearing shafts are…
Friction fitted Magwell for hi capa airsoft gun
Print with PET-G horizontally Nozzle: 0.25 Layer height: 0.08 mm Supports: yes
The One Ring to Bind them All ... I mean socket holder (now with more sockets!)
This is a remix of a great design. I printed 170 of the original and they fit and worked great. The only issue I found was that, since my home made MFT (Paulk style bench) is mobile, rolling over bumps and whatnot could bounce the plugs…
Got myself an “original” Nagoya na 771 but the included spacer wasnt doing his job and the antenna was not straight on the SMA connection, that for I created a perfect fitting spacer in 3 different heights so when the antenna screws in…
I've uploaded this model for those looking to build / improve a Dobsonian mount, particularly the swivel motion. When I first built my rocker box for the Hadley, I used a cheap lazy Susan bearing from the hardware store. This was a…
I wanted a simple Bowden Tube connector for my MMU3 unit on the filament side. I perused through Printables and did not find anything that fit my needs. So, I created the following in OpenSCAD and uploaded the OpenSCAD file along with my…
As with my other dust covers, this prints well in vase mode or with a couple perimeters for extra sturdiness. The rounded corners don't fit QUITE as neat as I would like, but the odd compound corners on the n64 cartridge caused me some…
I had a lot of problems with filament being stuck due to the higher friction of pulling out of the Ikea 365+ container and through 1.5m of reverse bowden. I liked the version created by AlexMu but there were things that I thought could be…
Printed in PETG with a 0.8mm nozzle and a layer height of 0.5mm (for speed), except the first two layers which use a layer height of 0.4mm (for proper dimensions) Each wall is two lines with a 0.8 nozzle. Each cell is 40x40mm The floor of…
Easily deposit magnets in without worrying about getting the polarity wrong or them flipping when trying to hammer them in. Also makes it super easy to get it lined up just right. You ideally want to print two of these, one for positive…
Results were obtained printing with 0.3 mm layer height on a 0.4 mm nozzle in spiral vase mode. Print instructions Category: Video Games Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: No Filament: Monoprice PLA…
Hardware: M3*20 Hex socket machine screw: 4 M3 nut: 4 4mm diameter, 2mm height magnet: 4 Assembly: Prepare all parts. PLA is fine for all parts, but i suggest PETG for the "slider latch" which has flexing pins. Print with 4+ walls and 30%…
16mm corner piece for a grow tent. Included SCAD file for parametric manipulation for your post size. In addition to 16mm, I've also included 14mm, 18mm, 20mm, and 22mm post size STLs ready to download and slice. Thank you t0b1 for the…
1 oz 0.5 oz 0.2 oz 0.1 oz
The original design had some great features and a number of remixes have emerged, however, there were still a few critical areas that were not addressed well. The cereal container used is very specific. There are some variations in the…
I tried to find a easy solution to reduce the needed force to unspool the filament. With plastic spool it is no problem, but with cardboard spool the filament needs really much force. With this tube between spool and holder, it is much…
These sign holders are remixed from lowlandet 's Desk plate signs - 10 different texts! I printed the signs and they slid out of the holder very easily. I added a slight bump that presses against the back of the sign inserts to hold the…
This is tool for trimming perfect shape of the starting shoe friction material. Print it from PETG 4 perimeters, 25% infill cubic. You need 2 steel shafts 8 mm h8 tolerance length 1x50 mm and 1x70 mm. 2x screw M5x20 mm 2x nut M5 Category:…
![Simple Friction Fit Tube / Coin Tube [Parametric]](https://media.printables.com/media/prints/827265/images/6381209_4f686eda-a153-4843-9316-4034ab76447b_f32cc258-1856-4ad2-ba62-0d14fac8e15f/thumbnail.png)
