Search results: ftm

Sort order

135 models

P
PrintablesAlvomane

Pacoone Tiny Air Pump Forclaz Trekking MT500 Air Mattress Adapter | Luftmatratzen Pumpen-Adapter

This is an adapter for inflating a Forclaz Trekking MT500 Air mattress from Decathlon with an inexpensive electric mini air pump from Pacoone (square version with lamp). The adapter is simply inserted between the pump outlet and the…

Downloads
51
Likes
10
Rating
5
P
PrintablesReypatey

Quechua Air Mattress / Luftmatratze Adaptor to Bike Pump

Adaptor for Decathlon Quechua Air Mattresses to regular Bike Pumps. My Mattresses intake is about 17.6mm wide. The Adaptor's width goes from 16mm to 19mm and it's 40mm high plus the little screwthread part. I've printed mine with 0.2mm…

Downloads
494
Likes
30
Rating
5
P
Printablesadcurtin

Cover with passthrough close button for liftmaster / chamberlain 877LM garage door keypad

My garage door keypad, an 877LM, can close the garage door just by pressing the enter button, no code needed. When I walk the dog, or take a car not parked in the garage, I want to easily close the door on the way out, and was annoyed…

Downloads
322
Likes
34
Rating
5
P
Printablesoe7mbt

FTM-400 desktop stand

Yaesu FTM-400 desktop stand Print instructions Unassociated tags: ftm 400, ham radio Category: Electronics Summary Yaesu FTM-400 desktop stand

Downloads
271
Likes
14
Rating
0
P
PrintablesHB9GXS

Yaesu FTM-400XD Display Mount

please use the supports as provided

Downloads
258
Likes
26
Rating
5
P
PrintablesOFF●SET

Merry Liftmas

My sister asked me to make this for her gym's Christmas party. If you or a fitness nut you know needs a little help dressing up their tree this year because they're too busy pounding the protein shakes, help 'em out! There's also a…

Downloads
242
Likes
41
Rating
5
P
PrintablesDirk2303

Air engine / Druckluftmotor

Trainingsmodel konstruiert in Fusion 360.

Downloads
241
Likes
8
Rating
3
P
PrintablesStrykker 3D

Yaesu FTM-500 Head Mount for Jeep JL or Gladiator

Model designed to mount the Yaesu FTM-500 head unit to the center dashboard pocket of the Jeep JL or the Gladiator. No additional hardware required from Yaesu. See model. Assembly only Requires 2 4mm threaded inserts and 2 4mmx5mm screws…

Downloads
199
Likes
22
Rating
0
P
PrintablesMikhail Amshei

Tesla Glass Roof LiftMaster Garage Door Opener Mount 1 piece print.

0.2 mm resolution no supports infill and wall settings should not matter, printed at 15% infill and 3 walls/tops/bottoms.

Downloads
194
Likes
23
Rating
4.6
P
PrintablesSkondo

Magura Sram Shiftmix

Used to combine mounting points for magura brakes and sram shifters in one clamp. Printed in PETG with 4 perimeters and 30% infill. No supports needed.

Downloads
190
Likes
20
Rating
4
P
Printablesniriwurx

RAM Ball Mount 25mm / 1 inch M5x20mm Yaesu FTM-500 FTM-400 Etc.

RAM Ball Mount 25mm / 1 inch M5x20mm Yaesu FTM-500 FTM-400 Etc. I got aggravated when I couldn't find a 25mm ball with an M5x20 screw to hold the remote head of your mobile radio. This should work with the Yaesu FTM-500, 400 and any radio…

Downloads
175
Likes
23
Rating
5
P
PrintablesDreigas

Craftman Heavy-Duty Desk Organizer & Hardware Tray

A practical, heavy-duty desk organizer/toolbox designed for makers and craftsmen to keep all essential tools within reach. Key Features: Dedicated Tool Storage: Deep compartments for larger hand tools, pliers, or callipers. Side Bit /…

Downloads
149
Likes
21
Rating
0
P
PrintablesW5AUG

Yaesu FTM-400 Desk Stand

3D printable desk stand for the remote display of a FTM-400 transceiver. This simple desk stand has various features. The front is angled for a good viewing angle. There is a large hole in the back to pass cables through. A square hold on…

Downloads
148
Likes
23
Rating
0
P
Printablesmajichael

LiftMaster Security Plus Control Button

LiftMaster 78LM Multi Function Garage Door Control Panel Door open/close button. This is just the cover for the open close door button, not the entire housing. Printed on Overture transparent PETG.

Downloads
132
Likes
9
Rating
5
P
PrintablesAxelCo

FTM-300 mount for Ham Chest Radio Go Box

This model is based on the original Ham Chest Design from SwiftyTheFox. Thanks for sharing! Since the FTM-300 has a slightly different housing than the FTM-400, the original mounting plate does not fit. With the modification the…

Downloads
121
Likes
30
Rating
0
P
Printablesedsai

Yaesu FTM-500DR replacement knob

My FTM-500DR control unit took a tumble and I lost one of the knobs after it popped off. Yaesu didn't respond to support requests so I decided I didn't want to wait and printed my own replacement knob. I've made two versions of it due to…

Downloads
119
Likes
6
Rating
5
P
PrintablesJoe O

Liftmaster garage door button mount

Simple modification of a different model. I cut the top of the original off to make it a remote mount. It holds the opener in place firmly, could be mounting in any orientation I think. *Edit 20230402* You may want to add supports for the…

Downloads
119
Likes
15
Rating
5
P
PrintablesRyan G

Ford 1999-2005 Excursion and SuperDuty Bag Hook Blank - Yaesu FTM Mount

I took a while to get the geometry more-or-less matching to replace the bag hook/ash-tray for these trucks. I'm currently using mine to mount a Yaesu FTM-150 dual band amateur radio, but I've included the blank mesh, and step files for…

Downloads
116
Likes
17
Rating
0
P
PrintablesEric Anastas

Slotted Jack Pad for Liftmaster 2.5 Ton Low Profile Jack

Pad to adapt my Liftmaster 2.5 Ton Low Profile Jack to the frame rails on my Nissan 350z https://www.amazon.com/dp/B07KPN94VM Print Settings Rafts: No Supports: Yes **Infill:** 100 Filament: Overture PETG Red Category: Tools

Downloads
110
Likes
14
Rating
5
P
PrintablesCotharyus

Yaesu FTM-300/100/200/6000 mobile radio desk mount

I decided I needed a good way to get my FTM-300 out of the way on my desk, so I made a mount for it. This is designed to hold the new style mounting cage that Yaesu is using that allows the radio to be released with a single lever. The…

Downloads
109
Likes
23
Rating
0
P
PrintablesOldCoder

Side rails for AnyTone AT-D578UV, and Yaesu FTM-400 (probably FTM-100)

Side rails for AnyTone AT-D578UV, and Yaesu FTM-400 (probably also FTM-100) Do not use too long of screws, or you may damage or destroy your radio! Side rails are 8mm thick. Rails are tall enough to leave an air gap under the radio. I…

Downloads
101
Likes
9
Rating
0
P
PrintablesCeptoRider

Liftmaster Remote 893LM Holder

Liftmaster Remote 893LM Holder Share your Make:)

Downloads
98
Likes
7
Rating
0
P
PrintablesGX1400

Yaesu FTM-300DR Head unit mount for 5th Gen (2015-2017) Subaru Outback center console

All files including design files are on my github (https://github.com/gx1400/3dprint_subaruoutback_consolemount) Be sure to print in PETG to be more temperature tolerant # Changelog 2022-12-13 - Initial Commit ## Design Autocad Fusion 360…

Downloads
96
Likes
10
Rating
5
P
PrintablesPrintSideways

LiftMaster Garage Door Opener enclosure

This is a new enclosure for the LiftMaster 3-button garage door opener. It is minimal in size. The original LiftMaster opener is bulky with a clip on it. Further to that, its plastic eventually degrades and the buttons fall off. This is a…

Downloads
96
Likes
6
Rating
0
P
PrintablesBenoît Lussier

Craftman lawn mower wing nut

I designed on Fusion 360 a replacement wing nut for my Craftman lawnmower. You just need a standard nut that you can insert in. You can glue it if you want. I have used black Materio3D PLA material.

Downloads
90
Likes
14
Rating
5
P
Printablesbusysignal

Yaesu FTM-500 Remote Head Bracket

An attempt at a temporary remote head bracket for the Yaesu FTM-500. Yaesu Original Part Number: RA6440200

Downloads
88
Likes
9
Rating
0
P
PrintablesDeniolan

Plate for multiple Chamberlain/Liftmaster/Sears Garage Door Opener Wall Controls

This wall plate allows you to neatly place two Chamberlain (Or LiftMaster, or Sears since they are all made by the Chamberlain group) wall control panels side by side. It has channels on the back side to hide the wires. You can use a…

Downloads
88
Likes
14
Rating
0
P
PrintableswebRat

Liftmaster garage door button cover

So, we have a 2 car garage and unfortunately, my car doesn't use the “big ass” button on the liftmaster remote. The liftmaster remote has a pretty unique side profile, but I made a sleeve that fits it and only exposes my button so that I…

Downloads
86
Likes
12
Rating
0
P
Printablesdavidian

LiftMaster 375UT Visor Clip

Visor clip that inserts into a LiftMaster garage remote. I recommend a brim if you print it on its side since the contact area of the thin part is so minimal. Link to original visor clip:…

Downloads
82
Likes
12
Rating
4
P
PrintablesMalatoke

Yaesu FTM-150R Compatible Desktop Stand

Just got my Yaesu and realized I needed a stand to tilt the radio up, and provide a place for the microphone to attach. I came up with this simple model. This holds the entire radio and not just the face which is what I wanted. I printed…

Downloads
81
Likes
8
Rating
5
P
PrintablesGBlades

Yaesu FTM-100D Facia Desk Stand

Desk stand bracket to hold the facia panel of the Yaesu FTM-100D at a 45 degree angle Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.2 Infill: 10% Filament: Sunlu PLA+ Black Category: Other

Downloads
76
Likes
7
Rating
0
P
PrintablesDarek

Yaesu FTM-500 car mount (using lighter socket)

No supports, no glue: You need just: 1x M3x15-20 bolt with hex head 1x M3 hex nut 1x M5x20 bolt (with a knob to your liking) Everything can be printed without supports. I recommend at least 25% infill and a filament that will stand higher…

Downloads
75
Likes
11
Rating
0
P
PrintablesOldCoder

Side rails for old Yaesu FT-100 HF Radio (NOT FTM-100 UHF/VHF)

Side rails for old Yaesu FT-100 mobile HF/VHF/UHF Radio. NOT for modern FTM-100 UHF/VHF mobile radio. Side rails are 8mm thick. They are tall enough to leave an air gap under the radio. Printed with PETG, 20% infill, on Prusa MK2. Used…

Downloads
71
Likes
7
Rating
0
P
Printablesloki7715

Merry Liftmas Remixed for Non Color Change Machines

Print the base in red and and print the first layer of the text section in red then change to white for the text. Once both are printed very carefully superglue the text section onto the plate. The text looks so bad because I'm using a .6…

Downloads
70
Likes
22
Rating
5
P
PrintablesAirplaneIan

Mounting bracket for Yaesu FTM-150RASP control head and microphone

This is is a bracket designed to attach a Yaesu FTM-150 control head and microphone to any AMPS (30 x 38mm) pattern mount. It works well with RAM mount or Lido Mount components for mounting the control head in a vehicle or even on a desk.…

Downloads
69
Likes
9
Rating
0
P
PrintablesSwiftyTheFox

Alternate Mic Belt Clip for FTM-400 XDE

The original "ring" on the mic of my FTM-400 XDE was not really useful for hanging the mic anywhere - so I made a new one. I should work with other Yaesu microphones as well, let me know if you made it work with your transceiver!

Downloads
61
Likes
13
Rating
5
P
PrintablesThawk

Yaesu FTM-300DR Dust Cover

There are 3 open “ports” on the back of the FTM-300DR radio chassis - two speaker ports and one data port. These ports are left unprotected when they are not in use. This print is a simple “friction” plug that spans all 3 ports and…

Downloads
61
Likes
7
Rating
0
P
PrintablesDivideby0

RAM Mount adapter for Yaesu FTM-500DR remote head

RAM adapter for Yaesu FTM-500DR remote head. It matches the RAM-B-347U base. Uses all M5 hardware with Nyloc nuts. Support is only needed for the center M5 bolt that attaches to the back of the remote head. V2 model available in 2…

Downloads
61
Likes
12
Rating
5
P
PrintablesPete_Radio

Yaesu FTM-6000 Side Covers

This is a side cover for the FTM-6000. M-Lok compatible slot for adding an antenna mount. This design is based off of the the Armoloq TTP-6000. This is a v.1 and has not been tested. Will work on left and right sides. Antenna mount can be…

Downloads
56
Likes
2
Rating
0
P
PrintablesSirPrintsALot

SwitchBot Button Pusher Case for LiftMaster 811LM Garage/Gate Opener

MyQ decided to change their API to block people from controlling their garage and gate openers with any 3rd party apps. This broke my ability to open my gate through HomeKit or anything other than the MyQ app which tends to not work very…

Downloads
55
Likes
15
Rating
0
P
PrintablesChase H

Chamberlain Group Liftmaster Sensor 041-0136

This remix shortens the original Garage Door Sensor Sun Shield by 20mm to better suit the Chamberlain Group LiftMaster 041-0136 safety sensors. The adjustment ensures a cleaner fit without interfering with alignment or mounting, while…

Downloads
51
Likes
6
Rating
5
P
PrintablesReboot222

The SwiftMount Pro

SwiftMount Pro is a sleek and modern quick-release plate designed for tripods. It’s an upgraded version of the classic “Quick Release Plate for Tripod,” with improvements in design, usability, and functionality. Features : Sloped Design :…

Downloads
51
Likes
8
Rating
0
P
PrintablesWheart

Spacer for Yaesu FTM-350

Almost any material will do the job - I've printed mine with DevilDesign Matt PLA

Downloads
49
Likes
6
Rating
0
P
PrintablesJoe

Wallmount Kraftmax BC-4000 Charger

I needed something to mount my charger to the wall. This is my solution. The charger just friction fits into the mount. I foresaw the necessity of a cap to fix the charger in place, which is why there is the possibility to have a square…

Downloads
49
Likes
3
Rating
0
P

PNW Loam Dropperpost Lever - Magura Shiftmix 3

I think there is no specific mount aviable so i make one. Recommend a 0.12mm layer height with 5 wall thicknesses. PETG or ASA/ABS Required: 1x M5 threaded insert and 2x M4x10mm Bolts The threaded insert is melted from the underside. This…

Downloads
48
Likes
6
Rating
5
P
Printablesrdcence

Yaesu FTM-300D stand for your bench

I was tired of my FTM-300D sitting flat on my bench. I kept bending over to see the entire display. So, I looked around on the Internet, thinking I could find and print something. I couldn't find anything, so I took to Fusion 360, and…

Downloads
44
Likes
1
Rating
0
P
PrintablesSimon

Luftmatratzenadapter für Standuppaddel Luftpumpe

Adapter um Standuppaddleluftpumpe für andere Sachen zu nutzen

Downloads
44
Likes
3
Rating
0
P
PrintablesLA3QMA

Yaesu FTM-400 bracket for quick removal.

Prints ok with 0.6mm nozzle. Do not use PLA unless it's used indoors. I a car window you need to use PETG or better filament to withstand the heat from the sun. The original bracket was screwed on so you needed tool to remove the display…

Downloads
42
Likes
12
Rating
0

Yaesu FTM-150R Invisible Desktop Stand | TPU

This is a basic desktop stand for the Yaesu FTM-150R dual-band mobile rig. It sits the radio up 2 inches at a 10 degree slope. The central ventilation ports are totally exposed. There's space under the control head to set down the mic.…

Downloads
40
Likes
4
Rating
0
P
Printablesakaderby

Magnetic LiftMaster Garage Door Opener Holder with Airtag Insert

Fits LiftMaster Security+ 2.0 Uses 10mm disc magnets, glued in place. I used duct tape to hold in the AirTag

Downloads
39
Likes
2
Rating
0
P
Printablesedsai

Yaesu FTM-500DR or FTM-510DR Tesla Model 3/Y mount

Designed a mount for the Yaesu FTM-500DR/510DR for a Model 3/Y Tesla. My Tesla is older with the flip up charging tray so I needed something the tray would clear hence the offset. There's a 18mm hole that will allow an M5 thumbscrew to…

Downloads
38
Likes
4
Rating
5
P
PrintablesLuggetto

Druckluftmotor/Air engine

Teile: 4x Kugellager: 10x15x4mm 1x Kugellager: 5x11x5mm 1x Dichtungsring: 7x4x2mm 1x Airsoftball: 6mm 1x Schrauben: M3 Senkkopfschrauben 8x Schrauben: M3 1x Acrylglasrohr: 20x17x32mm 6mm Schlauch Holz oder Metallstange 5mm Werkzeug:…

Downloads
37
Likes
6
Rating
0
P
PrintablesWheart

Yaesu FTM-350 mounting bracket

Mounting bracket for FTM-350 amateur TRX - i.e. for under-shelf mounting. TRX unit is secured with 4 screws (knobs are prepared for M4x16mm ones). Bracket has place for 5 mounting screws (countersunk head, up to 4mm, but can be drilled…

Downloads
37
Likes
4
Rating
0
P
PrintablesStolli

The Xmas "Merry Chriftmaf" Cookie Cutter

With the Xmas “Merry Chriftmaf” cookie cutter, you can transform your favorite cookie dough into fun treats for the holiday season. Happy baking! ;) Adjust the size of the cutter by scaling all the parts accordingly. For the best results,…

Downloads
36
Likes
16
Rating
0
P
PrintablesCeptoRider

LiftMaster 890 Remote Mount

Simple mount to secure the Liftmaster 890 remote to a flat surface. I use it to secure it to the interior of my motorcycle tank bag. Version 2 I made the side clips more aggressive and the key chain notch latching. Please Review and Share…

Downloads
36
Likes
3
Rating
0
P
PrintablesS33D

S33D — LIFT — LiftMount — MagSafe Car Vent Mount

LiftMount clips firmly to your car vent and holds your MagSafe charger flush and rattle-free. Minimal form that blends into the dash. Prints in one piece—no supports. Part of the LIFT series. If you would like to help support my work…

Downloads
34
Likes
6
Rating
0

Riftmaw Horror Statue

Riftmaw Horror Statue A dark fantasy creature statue featuring a terrifying monster with a savage, otherworldly presence. Designed with boss-monster energy, this piece works well for tabletop displays, fantasy shelves, horror collections,…

Downloads
34
Likes
10
Rating
0
P
PrintablesNieDa-Alpin

Dorn zum entlüften von Luftmatratzen-, Schwimmreifenventilen usw.

Die meisten Ventile verfügen über eine Sicherung, damit die Luft nicht einfach so entweichen kann. Einfaches entlüften durch einstecken. Der “Dorn” ist innen hol. Druck mit PLA, PETG usw. mit 60% Infill, damit er ausreichend stabile ist.…

Downloads
34
Likes
0
Rating
0
P
PrintablesDL1OLI

Renault Zoe Phase 2 (from 2019 on) holder for Ham Radio control unit (Yaesu FTM-6000)

This is a holder to fit Renault Zoe Phase 2 (from 2019 on) for Ham Radio control unit Yaesu FTM-6000 and similar. I used PETG (Extrudr XPETG matte) and print on the side with tree supports. mod of…

Downloads
33
Likes
9
Rating
0
P
Printablessn3dCAD

Gridfinity bin Kraftmax BC4000 battery charger

Hi, to organize my drawer i created a Gridfinity box for the Kraftmax BC4000 Battery Charger. The box has space for a label and does also fit the power cable (EU version) + instruction below the charger. Gridfinity size: 3x2x9 If you…

Downloads
31
Likes
5
Rating
0
P
PrintablesASchaldy

Liftmaster Sprocket Cover

Sprocket cover for a Liftmaster of Chamberlain garage door opener. Part number 03100380 This cover is to protect the sprocket the runs the chain on the top of the garage door opener. Print Settings Printer Brand: Creality Printer: Ender 3…

Downloads
30
Likes
0
Rating
0
P
Printablesrod1234

Craftman Exterme Grip 6-Piece Diamond Tip Screwdriver Set holder/organizer

This screwdriver was recommended by Project Farm so of course I bought it. Made an organizer for it.

Downloads
29
Likes
3
Rating
0
P
PrintablesBenoît Lussier

Craftman lawn mower wheel repair kit

With time the wheels of my Craftman lawn mower came loose and got out even if the bolt is in place. The wheel hole now has a conical shape and the back of the wheel is worn too. With those 2 parts no need to change the wheel. The flange…

Downloads
28
Likes
12
Rating
0
P
PrintablesSoso

Liftmaster TX2/4EV remote replacement shell

This is a replacement shell for the LiftMaster TX2/4EV remote, designed to work with the original rubber buttons and screw. Two versions are available: a solid model and one with a small cutout for viewing the LED indicator. For the…

Downloads
28
Likes
0
Rating
0
P
Printablesedsai

Yaesu FTM-500/510 Tesla Model 3/Y foldable display mount

A variation of my original Yaesu FTM-500/510 Tesla model 3/Y mount that sits flush on the bottom left of the center console screen produced in collaboration with Sam M. He had a folding hinge bracket we fit to the model to allow you to…

Downloads
28
Likes
2
Rating
0
P
Printablessmul

Yaesu FTM-400 to ibolt 1" ball adapter

Link to the ball: https://www.amazon.com/Composite-Adapter-Industry-Standard-mounting/dp/B07RJZ22FX I designed this to use 4 m3 heatset inserts EG…

Downloads
26
Likes
5
Rating
0
P
Printablesjkim_makes

LiftMaster 893LM Cover

My garage door opener was activating on accident. This is a simple cover for the remote that prevents activation of the large button. It's held in place by friction and the notch on the rear of the remote helps to slide it out. Category:…

Downloads
25
Likes
3
Rating
0
P
Printablessmul

Yaesu FTM-400 to ram adapter

I designed this to use 2 m3 heatset inserts It has a small lip to help the m5 screw that goes to the display from getting loosened by car vibrations. Unfortunately my ftm-400 started having issues on my last trip so no good pictures until…

Downloads
25
Likes
4
Rating
0
P
PrintablesUnsignedLong

Skadis Kraftmax Charger Mount

Mount the Kraftmax BC 4000 Pro to an IKEA Skadis board.

Downloads
24
Likes
3
Rating
0
P
PrintablesRobert Banach
Downloads
24
Likes
1
Rating
0
P
Printablesphilbo_bagginsy

Shimano Shiftmount I-SPEC II Bike Handlebar Clamp

This v1 model I created to have a print in place pin on the hinge side, and screw to the shimano shifter. On the clamp side, I installed a M4 heatset insert and a M4 bolt. It has worked for me so far, but I am also planning a redesign to…

Downloads
24
Likes
3
Rating
0
P
PrintablesDante
Downloads
24
Likes
4
Rating
0
P
Printablesiop22

Liftmaster 895MAX buttons

Replacement for the buttons/middle plastic piece of an 895max garage door remote. It isn't perfect but it worked for me. I printed it vertically with the buttons up. It doesn't matter much cause it'll use lots of support either way. The…

Downloads
23
Likes
0
Rating
0
P
PrintablesMatt

Yaesu FTM-500 FTM-510 AMPS mount

This will adapt a Yaesu FTM-510 or FTM-500 to a standard 38x30 AMPS mount using a 5mm stud. Or any other radio that uses a 5mm stud. It is designed to work with a quick release adapter that attaches to the device, rather than screw…

Downloads
23
Likes
2
Rating
0
P
PrintablesMike

Yaesu FTM

A desk top unit to hold your FTM-500 series radio consisting of the main frame, with left or right side option for the microphone. A separate holder for the radio head unit that is used to attach to the main frame or be used separately to…

Downloads
23
Likes
3
Rating
0
P
PrintablesCaleb Begly

Chamberlain/Craftsman/Liftmaster Safety Sensor Sun Shade

Overview: This is a sun shade I designed for Chamberlain/Craftsman/Liftmaster compatible safety sensors. It is tested with the Chamberlain Model 820CB, but should work with any similar Chamberlain/Craftsman/Liftmaster sensor. Why Do I…

Downloads
22
Likes
0
Rating
0
P
Printablesccl13

Chamberlain / LiftMaster Mini Universal Garage Door Remote Holder for Kia Niro 2019/2020 with 3M Command strip

A Chamberlain / LiftMaster Mini Universal Garage Door Remote Holder, to mount it onto the center console. It is designed to be compatible with 3M Command Outdoor strip for secure mount and easy removal. It is designed to fit Kia Niro EV…

Downloads
22
Likes
3
Rating
0
P
PrintablesAnderrs

Ikea stoftmoln 37cm roof plate

The Ikea Stoftmoln 37cm ledlight do not have any room between the roof outlet and the lamp so i created a triangle that gives 47 mm space to be able to house the powerconnector. Screws used to fixate to roof was 4.2 x 55mm. The triangle…

Downloads
21
Likes
1
Rating
0
P
PrintablesVasuldiabl

Handle for a edge trimmer Craftman C3 19.2v

Handle for a edge trimmer Craftman C3 19.2v. Mine broke, parts are no longer available, so I build one. Resuse the same screw. Print Settings Printer Brand: Anycubic Printer: Large Size Chiron Rafts: No Supports: No Resolution: 0.2mm…

Downloads
20
Likes
3
Rating
0
P
Printablesjrvaille

SoftMount O3 JeNo 3"

Nouveau SoftMount O3 pour JeNo 3"

Downloads
19
Likes
1
Rating
0
P
PrintablesAnderrs

Ikea stoftmoln 24cm roof plate

The Ikea Stoftmoln 24cm ledlight do not have any room between the roof outlet and the lamp so i created an octagon that gives 40 mm space to be able to house the powerconnector. Screws used to fixate to roof was 4 x 55mm. The Octagon uses…

Downloads
19
Likes
2
Rating
0
P
PrintablesMacPro_de

Wall mount for "Kraftmax XT1 Revolution Battery Tester V2"

I printed the model with PETG, 0.6mm line width, 0.3mm layer height, 24% infill, and mounted it onto a piece of MDF (approx. 295 x 165mm) which I could then hang on the wall. All brandnames and productnames are trademarks or registered…

Downloads
18
Likes
2
Rating
0
P
PrintablesMrEUser

Monitor mount for Yaesu FTM400(dx) head unit

Welcome to my second model. I made this out of PETG for rigidity. It hooks over the top of a flat panel monitor and supports the head unit for a Yaesu FTM-400 (and XD). This is not compatible with every flat panel monitor in existence,…

Downloads
18
Likes
5
Rating
0

LiftMaster TX2/4EV remote holder

A simple holder for the LiftMaster TX2/4EV remote. that I made with the intention to mount with doublesided taped in my car but still being able to change the remote batteries. I printed with the settings: 0.2mm layers 3 wall loops, 3…

Downloads
18
Likes
0
Rating
0
P
PrintablesJorge Brites

FTM-300D / Xiegu G90 Stack V0.1

Fast fix to stack the two radios, using the Xiegu G90 oficial Fan Mount System as base, and be easy dismounted. That part needs the Xeigu G90 Fan mount and the mounting bracket that comes with the FTM-300DR to work. And need to be screwed…

Downloads
18
Likes
4
Rating
0
P
Printablesgodofdonuts

Garage Door Opener for NA (89-97) Mazda Miata using LiftMaster Remote

This model uses the control board from a generic Liftmaster/Chamberlain/Craftsman garage door opener remote ( generic link ). They're a dime-a-dozen on Amazon and chances are they work with your garage door if you're in North America.…

Downloads
17
Likes
2
Rating
0
P
PrintablesOuwekaas

Quad Lock Ring Adapter for Yaesu FTM-510 and FTM-5xx Series

The Ring Adapter is designed to securely lock the Quad Lock Pivot Arm Ball in place, preventing any unwanted rotation on the Yaesu FTM-510 (and compatible FTM-5xx series) chassis. It provides a firm, reliable connection between your radio…

Downloads
16
Likes
4
Rating
0
P
Printablespjax_

Housing for mounting Liftmaster Garage Door Remote

This is a slide-in housing for the LiftMaster 373LM garage door remote. This mount is designed to be adhered to a vehicle surface so that you can use a strong, heat resistant double-sided tape. Before this I was using adhesive…

Downloads
16
Likes
3
Rating
0
P
PrintablesWivry

IKEA Luftmassa

This is a simple model that can be printed out of transparent filament and inserted into IKEA luftmassa pendant light. You may also liked some of these projects: https://wivry.gumroad.com…

Downloads
16
Likes
13
Rating
0
P
Printablesgeorgag

CraftMates Lockables Divider

This is a divider for the CraftMates Lockables™ Organizer.

Downloads
16
Likes
1
Rating
0
P
PrintablesCostal Radio

Chest Carrier for Yaesu FTM-150R

The Yaesu FTM-150R(ASP) is a pretty good radio for working FM repeater satellites. It is able to do crossband duplex, has good harmonic filtering, and has a good receiver. It is a bit clunky to use with a handheld beam antenna (Arrow or…

Downloads
15
Likes
6
Rating
0
P
Printablesskrzypczuk

Yaesu FTM-500 Dodge Durango Mount

I made this for my father to fit his radio in dodge durango under car's radio

Downloads
15
Likes
2
Rating
0
P
PrintablesMunrakare

Foldable Silicone STP Stencil for FTMs (cheaper than most alternatives)

An STP stencil for those FTM / AFAB / etc. who would like the convenience of using a stand-up relieving station without the use of a packer, or those who don't mind their current equipment. (Sorry about the vagueness of language here,…

Downloads
14
Likes
1
Rating
0
P
PrintablesMuecke1704

Entlüfter für Schwimmtiere, Luftmatratzen etc

Wenn ich die Luft aus unseren Schwimmtieren und Luftmatratzen auslassen wollte, fand ich es immer ziemlich nervig mit einer Hand das Ventil zu drücken, deshalb habe ich mir diesen Dorn gedruckt. Jetzt nur noch das Ventil öffnen,…

Downloads
14
Likes
1
Rating
0
P
PrintablesSaftkalaset

Ikea Stoftmoln Back Spacer

Spacer for the Ikea Stoftmoln 24cm ledlight to create a 25 mm gap between the backside of the ledlight and the ceiling. Print three to fit in each of the mount points on the back of the ledlight. Version available to print on side that…

Downloads
14
Likes
0
Rating
4.5
P
PrintablesTechineer

Display mounting bracket for Yaesu FTM-400

The Yaesu FTM400 VHF/UHF amateur radio transceiver has a separate control head that can be mounted away from the main body of the transceiver. It comes with a sheet metal stand that can be attached to a top surface, but the back of the…

Downloads
14
Likes
1
Rating
0
P
Printablesk8md

Yaesu FTM-100DR Faceplate / Trunnion for 10" rack

This is a faceplate / trunnion for a Yaesu FTM-100D to hold it into a 10" rack. I based this on the 10" rack that many homelabbers are using for Ubiquiti gear. I thought a 10" rack would be perfect to hold two way mobile radios. This…

Downloads
13
Likes
4
Rating
0
P
PrintablesMannerMan

Enclosure/mount for IKEA Stoftmoln (37cm)

I recently bought two Ikea stoftmoln (37cm variant) light fixtures for our dining room. These light fixtures are meant to be used/placed over a ceiling power outlet, something which we don't have in our house. They also look kind of ..…

Downloads
13
Likes
1
Rating
0
P
PrintablesHeiLaut

Force gauge / Kraftmesser

New version: https://www.printables.com/de/model/1008549-force-sensor-for-phyphox An esp32 based force gauge to measure forces from -9.81 N to 9.81 N. You can read the data through phyphox on your Smartphone or with any serial…

Downloads
13
Likes
4
Rating
0
P
PrintablesDanO83

3B-R 2207 Motor Pants and softmount (could fit other naked bottom motors)

3B-R 2207 Motor Pants and softmount print with tpu for softmount Category: R/C Vehicles

Downloads
13
Likes
1
Rating
0