17,500 models
IMPORTANT Read the description carefully before print! Check the changelog at the bottom before printing, there might be updates to the model The original model and the parametric one are not stackable with each other! Prusa Mini version:…
Print approx. €0.13–€0.16 excl. taxPreliminary estimate for PETGSource material: PET
Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models , get access to exclusive models , and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my…
Print approx. €0.13–€0.16 excl. taxPreliminary estimate for one variant
Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models , get access to exclusive models , and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my…
Print approx. €0.31–€0.37 excl. taxPreliminary estimate for one variant
I wanted to put all my Dremel accessories in the Dremel box, included in my new set, but the sponge inserts wasted soooo much space. So I decided to make it fit. First I tried to design a 4 piece design, but that would lack modularity, so…
Print approx. €1.69–€2.07 excl. taxPreliminary estimate for one variant
This is a caliper holder for the gridfinity system. The available ones are either too tall for drawers, or waste space. This one stands the caliper on it's side, saving maximum space. I didn't bother put battery holes in it, because I…
Print approx. €2.96–€3.62 excl. taxPreliminary estimate for PETGSource material: PET
This is for Zach Freedman's Gridfinity. It can hold 22 CR2032 or 44 CR2016 batteries, 12 357/303/SR44 batteries, and 2 A23 batteries (commonly used in garage door openers). The A23 slots can hold AAA batteries, but the holder will no…
Print approx. €2.25–€2.75 excl. taxPreliminary estimate for one variant
For bigger cabels: https://www.printables.com/model/1203677-gridfinity-cable-organizer-big-cabel-2x3 this is inspired by: https://www.printables.com/model/274250-ikea-alex-cable-organizer but it's completely redrawn with different sizes…
Print approx. €3.22–€3.94 excl. taxPreliminary estimate for one variant
A remix of the great Gridfinity Modular Drawer System by Chipp Walters that saves 37% of filament, reduces print time and is also less challenging than Hexagon pattern remix by soulbrotherb. I added small stops for the trays, so that they…
Print approx. €12.31–€15.05 excl. taxPreliminary estimate for one variant
Design description This is a gridfinity holder for the Xiaomi Wowstick 1F+ (plus) and its 56 bits. Also holds the base and (de)magnetizer. May also be compatible with the 1F Pro, not sure what the differences are. Based on ZachFreedmans…
Print approx. €9.65–€11.80 excl. taxPreliminary estimate for one variant
Gridfinity - Metric Screw Labeled Bins (M2.5, M3, M4, M5...plus you can mod for others) Bins used for storing small metric screws (M2.5,M3,M4 and M5). If you need other sizes you can simply use prusa slicer to change embossed text based…
Print approx. €17.38–€21.25 excl. taxPreliminary estimate for PETGSource material: PET
Screws labels with pictures of DIN912 screws
Print approx. €0.33–€0.40 excl. taxPreliminary estimate for one variant
I'm a big fan of the #Gridfinity storage system that Zack Freedman put together, so modified the shelf with a 3x2 gridfinity weighted baseplate!
Print approx. €1.96–€2.39 excl. taxPreliminary estimate for one variant
I've created a parametric bottle with a knurled or fluted cap that scales up as large as desired for the Gridfinity system. I've included STLs for some basic sizes, and my Fusion360 Archive file so you can generate your own. I like the…
Print approx. €1.81–€2.22 excl. taxPreliminary estimate for one variant
Gridfinity base grid for Festool Systainer 3 toolbox. Print 4 pieces and glue together or just in one piece if you have a large printer.
Print approx. €3.39–€4.14 excl. taxPreliminary estimate for one variant
Gridfinity screwdriver holder for Craftsman screwdriver set.…
Print approx. €8.89–€10.87 excl. taxPreliminary estimate for PETGSource material: PET
This holder allows to store development boards with pins mounted on the bottom in Zack Freedman's Gridfinity system . As such boards come in various sizes (e.g. different ESP8266 or ESP32 boards, Raspberry Pi Pico, Arduino Nano, …), the…
Print approx. €4.76–€5.81 excl. taxPreliminary estimate for one variant
There are lots of Nextruder bin designs for Zach Freedman's Gridfinity system, but none of them worked for my needs. So I made this one from scratch. If you are unfamiliar with the Gridfinity system, watch Zach's original video below.…
Print approx. €4.77–€5.83 excl. taxPreliminary estimate for PETGSource material: PET
Gridfinity battery bins for CR2032-batteries. The bins can be stacked. Included bins: A 1x1x4 bin that fits 8 batteries. A 1x2x4 bin that fits 16 batteries. The base box is generated with the Fusion 360 GridfinityGenerator,…
Print approx. €0.84–€1.03 excl. taxPreliminary estimate for one variant
Holder for Dymo LabelManager 160 label tape, compatible with the popular Gridfinity organization system. More details on the Gridfinity system:
Print approx. €6.22–€7.60 excl. taxPreliminary estimate for one variant
Gridfinity bin for Dremel It has a 1x2 bin footprint. Used for Dremel spanner, chucks and standard 3.15mm (1/8") tools. I really needed a bin with both spanner and tools, and figured I'm not alone. There's no lip on the bin since You…
Print approx. €3.13–€3.83 excl. taxPreliminary estimate for one variant
This model uses the Gridfinity plugin to Fusion 360. The modeling is fairly basic after that, a negative extrude with an edge fillet. This then uses the rectangular pattern feature to build out the rest of the slots for the batteries.
Print approx. €1.59–€1.94 excl. taxPreliminary estimate for one variant
Contains files for: - Single Zippo - Dual Zippos - Single Bic - Zippo and Bic Survival Kit Collection: https://www.printables.com/social/240789-stevew91/collections/296699
Print approx. €1.74–€2.13 excl. taxPreliminary estimate for one variant
This is a basic usb stick storage module using the Gridfinity plugin for Fusion360. The .f3d file includes the parameters used for the width, depth and thickness of the tongue on the usb sticks I was using. I later saw…
Print approx. €1.71–€2.09 excl. taxPreliminary estimate for one variant
A single Hex bin with 2 x 4 Gridfinity and 6mm hight. The base is created with the gridfinity fusion 360 plugin from https://github.com/Le0Michine/FusionGridfinityGenerator Look at my other HexBin's here:…
Print approx. €3.92–€4.79 excl. taxPreliminary estimate for one variant
Matthew's Modern Gridfinity Case design is fantastic, but I find that it takes up a lot of desk space when hinged fully open. This simple mod replaces the hinge pieces with new ones that limit the travel to approximately 100 degrees. I…
Print approx. €0.75–€0.91 excl. taxPreliminary estimate for PETGSource material: PET
Wanted a way to find and store my Micron pens better. This is a nice stackable setup that holds them tight while still allowing easy assess. Fully stackable These are pretty customized to the Micron but happy to share the fusion file for…
Print approx. €5.34–€6.53 excl. taxPreliminary estimate for one variant
This is a baseplate for Gridfinity system to screw it down to a wooden surface using small wood screws. I modified the screw holes with chamfers to allow usage of little countersunk wood screws 2,5x10. It is a remix based on…
Print approx. €4.19–€5.13 excl. taxPreliminary estimate for one variant
quick access to scalpel and other tools
Print approx. €1.75–€2.14 excl. taxPreliminary estimate for one variant
Gridfinity Bin for gallon size ziploc baggies (3x7x7). Use 6mm x 2mm magnets to hold halves together and lid on. Requires 6 to hold halves together and has spots for 28 to hold lid on, but only takes 12 to hold firmly. Print lids face…
Print approx. €4.27–€5.22 excl. taxPreliminary estimate for PETGSource material: PET
Exciting Update to Our Hex Bit Holder Design! In response to the community's feedback and my desire to enhance functionality, I've rolled out significant updates to our beloved hex bit holder. Here's what's new: Increased Capacity:…
Print approx. €7.58–€9.26 excl. taxPreliminary estimate for one variant
Holds 4 Brother TZ style printer cartridges, used in a P-Touch printer, in a 2x2 Gridfinity space. They are held ‘vertically’ so that they take up minimal gridfinity squares on your baseplate. There are no magnet holes in the base as this…
Print approx. €3.62–€4.42 excl. taxPreliminary estimate for one variant
A 1x1 Gridfinity pen holder for 5x pens up to 12mm in diameter. Pen holder now fits Pilot G2 pens.
Print approx. €1.29–€1.57 excl. taxPreliminary estimate for one variant
A single Hex bin with 4 x 4 Gridfinity and 6mm hight. The base is created with the gridfinity fusion 360 plugin from https://github.com/Le0Michine/FusionGridfinityGenerator Requested by @CG485_1311834 Look at my other HexBin's here:…
Print approx. €6.35–€7.76 excl. taxPreliminary estimate for one variant
This is just a simple gridfinity bin for the CORE One Tools. There are two versions available.
Print approx. €2.65–€3.24 excl. taxPreliminary estimate for PETGSource material: PET
Stackable Gridfinity bins, one 1x2x5 for storing 10 * LR14250 batteries, one 1x1x2 for storing 16 LR41 and one 1x1x2 for storing 10 LR44. The base box is generated with the Fusion 360 GridfinityGenerator,…
Print approx. €0.51–€0.63 excl. taxPreliminary estimate for one variant
Gridifinity bind for CD or DVDs. The bins can be stacked. Included bins: Bin for 1 CD/DVD - size 3x3x1 (126x126x7 mm) Bin for 6 CDs/DVDs - size 3x3x2 (126x126x14 mm) Bin for 12 CDs/DVDs - size 3x3x3 (126x126x21 mm) Bin for 18 CDs/DVDs -…
Print approx. €1.48–€1.81 excl. taxPreliminary estimate for one variant
These hammer pieces are for holding various hammers that i have. hopefully the sizes fit for you. they are modular. I use these flat bins to fill in the voids. Individual I have 4 hammers - - 2.5lb ESTWING sledge - 2-1/2" rubber mallet…
Print approx. €13.19–€16.13 excl. taxPreliminary estimate for one variant
A Gridfinity tool holder for an iFixit Kit.
Print approx. €3.66–€4.47 excl. taxPreliminary estimate for one variant
I needed a solution to solve the issue of my Zyn cans sliding around on the base of my Gridfinity as I open and close my drawer. I designed the holder to be 2x2 as far as the base and it holds 2 cans of Zyn. Print Settings Layer Height:…
Print approx. €6.49–€7.93 excl. taxPreliminary estimate for one variant
I purchased a new USGeneral (Harbor Freight) Series 3 42" toolbox (top and bottom). The top toolbox has wide drawers on the left, and narrow drawers on the right. This model is for a Gridfinity base that fits perfectly inside the narrow…
Print approx. €0.73–€0.90 excl. taxPreliminary estimate for PETGSource material: PET
Gridfinity battery bins for D-/R20-batteries. The bins can be stacked by using the included spacers. A 1x2x4 bin that fits 2 batteries. A 2x2x4 bin that fits 4 batteries. A 1x2x6 spacer that is needed to stack the 2-battery bins. A 2x2x6…
Print approx. €0.75–€0.92 excl. taxPreliminary estimate for one variant
UPDATE: I created a new and improved version of this model that nests and allows for multi-stacking. It's better than this one in every way - I recommend using it instead. Link to updated version:…
Print approx. €2.85–€3.48 excl. taxPreliminary estimate for one variant
Gridfinity battery bin for C-/R14-batteries. The bin can be stacked by using the included spacer. A 1x3x4 bin that fits 4 batteries. A 1x3x4 spacer that is needed to stack the battery bins. NOTE: The spacers are best printed upside down…
Print approx. €0.65–€0.80 excl. taxPreliminary estimate for one variant
Socket holder ½ to ¾ sae The socket holder uses a gridfinity 2x4 bin. Its made for sae sockets ½, 15/32, 7/16, 3/8, 5/16, 9/16, 19/32, 5/8, 21/32, 11/16 and 3/4. Used with 1/2" drive ratchet. Print “standing” with 10% gyroid/grid infill…
Print approx. €7.25–€8.86 excl. taxPreliminary estimate for one variant
A compact stackable Gridfinity 2x2x9 with two partitions, each partition fits 20 AA batteries or 6 C batteries. It is not ideal for C batteries as the batteries can be hard get when the partition is full. The base box is generated with…
Print approx. €4.57–€5.59 excl. taxPreliminary estimate for one variant
Socket holder 1-1/4 to 25/32 sae The socket holder uses a gridfinity 2x5 bin. It's made for sae sockets 1-¼, 1-3/16, 1-1/8, 1-1/16, 1", 15/16, 7/8, 13/16 and 25/32 (Biltema). Used with 1/2" drive ratchet. Print “standing” with 10%…
Print approx. €8.36–€10.22 excl. taxPreliminary estimate for one variant
Gridfinity Bin for quart size ziploc baggies (2x6x7). Use 6mm x 2mm magnets to hold halves together and lid on. Requires 6 to hold halves together and has spots for 24 to hold lid on, but only takes 8 to hold firmly. Print lids face down…
Print approx. €2.65–€3.24 excl. taxPreliminary estimate for PETGSource material: PET
Socket holder 5/32 - 1/2 sae, 1/4" drive ratchet The socket holder uses a gridfinity 2x2 bin. It's made for sae sockets 5/32, 3/16, 7/32, 1/4 9/32, 5/16, 1/32, 3/8, 13/32, 7/16 and 1/2. Print “standing” with 10% gyroid/grid infill and no…
Print approx. €3.17–€3.87 excl. taxPreliminary estimate for one variant
These bins have the perfect shape that nestle in the IKEA Maximera drawer's sloped wall. This version fits best if the Gridfinity baseplate is up against the curved part of the drawer. These drawers are used in the METHOD and SEKTION…
Print approx. €1.53–€1.87 excl. taxPreliminary estimate for one variant
A single Hex bin with 2x3 Gridfinity and 6mm hight. The base is created with the gridfinity fusion 360 plugin from https://github.com/Le0Michine/FusionGridfinityGenerator Look at my other HexBin's here:…
Print approx. €3.25–€3.97 excl. taxPreliminary estimate for one variant
Gridfinity 1x2 bin for holding a sae 1/2" cardan joint and a 3/8" reduction step socket Here's a gridfinity bin size 1x2, where you You can stash a 1/2" cardan joint and a ½" to 3/8 reduction step socket. Used with 1/2" drive ratchet.…
Print approx. €2.25–€2.75 excl. taxPreliminary estimate for one variant
Gridfinity 1x2 sparkplug socket holder bin sae The socket holder uses a gridfinity 1x2 bin. Its made for sae spark plug sockets 13/16 and 5/8. Used with 1/2" drive ratchet. You can hang it on a peg board or wall with the gridfinity 2x5…
Print approx. €2.59–€3.17 excl. taxPreliminary estimate for one variant
Gridfinity cutlery storage, probably won't work with yours Step files included
Print approx. €5.46–€6.67 excl. taxPreliminary estimate for one variant
Simple modification of Zack Freedman's 1x1 gridfinity bins that adds internal dividers (half-split and quad-split options), deepens the internal volume, and removes the magnet feet holes from the bottom. I think I also used @Akio's…
Print approx. €0.70–€0.85 excl. taxPreliminary estimate for one variant
Design description This is a gridfinity holder for 9 27A batteries. Block area is 1x1, and has a height of ⅔, not stackable when filled. Gridfinity description Maker-favorite screwdriver storage blocks for the Gridfinity modular workshop…
Print approx. €1.28–€1.56 excl. taxPreliminary estimate for one variant
To be used with the Screwiverse inserts.
Print approx. €0.27–€0.33 excl. taxPreliminary estimate for one variant
Torx and allen socket holder for 1/2" drive ratchet. The socket holder uses a gridfinity 2x4 bin. Its made for sockets TX30, TX40, TX45, TX50, TX55, TX60, HW5, HW6, HW7, HW8, HW10 and HW12. Used with 1/2" drive ratchet. Print with 10%…
Print approx. €5.55–€6.79 excl. taxPreliminary estimate for one variant
This cutting stencil allows you to cut 5mm strips of double sided tape, that can be stuck to the underside of Gridfinity Baseplates, so they can be stuck rigidly inside a drawer.
Print approx. €1.16–€1.41 excl. taxPreliminary estimate for one variant
Since the Alex drawers do not open fully, it is hard to reach the bins on the back of the drawers. This tray allows you to quickly remove bins on the front of the drawer, making it possible to slide the ones on the back to access them!…
Print approx. €0.07–€0.09 excl. taxPreliminary estimate for one variant
Socket holder 9/16 - 3/4 sae, 3/8" drive ratchet. The socket holder uses a gridfinity 2x2 bin. It's made for sae sockets 9/16, 19/32, 5/8, 11/16 and 3/4. Print with 10% gyroid/grid infill and no support. You can hang it on a peg board or…
Print approx. €2.89–€3.53 excl. taxPreliminary estimate for one variant
Organize your crafting essentials with the Gridfinity 5x2 Holder, specially designed for Bosch Gluey and spare glue sticks. This holder provides a neat and accessible storage solution, ensuring your glue gun and extra supplies are always…
Print approx. €10.22–€12.49 excl. taxPreliminary estimate for one variant
This holder organizes, but still keeps the original case. It was made to allowing opening without pulling the whole case out of the holder.
Print approx. €9.86–€12.05 excl. taxPreliminary estimate for one variant
This is a simple tool holder, compatible to the gridfinity system. It's easy to print, nothing special here.
Print approx. €3.27–€4.00 excl. taxPreliminary estimate for PETGSource material: PET
Ratchet holder for both 1/4" and 3/8" craftsman ratchets and a spot for a 1/4" bit to ratchet adapter. Fits on the standard gridfinity system. 5x3 cubes.
Print approx. €5.37–€6.57 excl. taxPreliminary estimate for one variant
I prepared two file variants. A version without a silicone sock and a version with. There is no difference in size, only text labels are added as modifiers directly in the PrusaSlicer. Feel free to change it as you need.
Print approx. €0.91–€1.11 excl. taxPreliminary estimate for one variant
This is a Gridfinity Storage Case for the Prusa Mini+ (Kit) 3d-printer you can store up to: 1x Needle-nose pliers Nozzle cleaning stuff 1x Universal wrench 4x Allen keys 1x Torx key 5x Glues for printbed 8x Nozzles Prusa mini + Sparparts,…
Print approx. €0.18–€0.22 excl. taxPreliminary estimate for one variant
Stackable Gridfinity bins and a template filament sample card. Sample Bins The Gridfinity sample bins are stackable for easy storage in drawers. 1x2x6 bin that fits 10 filament sample cards. 2x2x6 bin that fits 21 filament sample cards.…
Print approx. €0.19–€0.24 excl. taxPreliminary estimate for one variant
Gridfinity bin socket torx key holder Supports torx keys size TX45, TX40, TX30, TX25 and TX20 The torx key including socket is 126mm (4 15/16") long and the socket ⌀ is ~17.5mm (11/16"). Used with 3/8" drive ratchet. The socket holder…
Print approx. €5.31–€6.49 excl. taxPreliminary estimate for one variant
I included a 1 and 3 stick stand. I was putting “Elmers Washable School Glue Sticks" in the stands. They are 22g and about 27mm in diameter. I made the holes 29.5 for fitting and ease of removal and insertion. I printed mine at .28 with 1…
Print approx. €0.78–€0.95 excl. taxPreliminary estimate for one variant
Remix of Gridfinity Swann Morton scalpel holder . This model holds up to two scalpels and has space for extra blade storage like the original. Each compartment has a detent, so you can push down on the back end of the scalpel, raising the…
Print approx. €3.18–€3.89 excl. taxPreliminary estimate for one variant
Prints very well in PETG with 10% gyroid infill and 3 outer layers.
Print approx. €1.86–€2.28 excl. taxPreliminary estimate for PETGSource material: PET
Custom Cutout Gridfinity Bin for Parkside PFBSA 4 A1 Cordless Rotary Tool (from Lidl) Bin is 5 x 2 units - doesn't fit the Mini printer, so I prepared also the split version with dovetail joint to fit the Mini printer. ℹ 1 split part (for…
Print approx. €3.96–€4.84 excl. taxPreliminary estimate for one variant
Gridfinity storage for a Dymo LetraTag 200B Bluetooth Label printer. Size: 3x3x2.
Print approx. €4.82–€5.89 excl. taxPreliminary estimate for one variant
A gridfinity charger for your Sonicare Toothbrush.
Print approx. €3.42–€4.18 excl. taxPreliminary estimate for PETGSource material: PET
Gridfinity bin for torx, allen bits and a 3/8" socket adapter The bit holder uses a gridfinity 1x2 bin. Holds nine larger 5/16" / ~8mm hex bits and one 3/8" socket to 5/16" (~8mm) adapter: T-55H, T50-H and T45-H (Torx - Tamperproof) 10mm,…
Print approx. €1.22–€1.50 excl. taxPreliminary estimate for one variant
The Gen2 system (by Jerrari ) combined with Gridfinity is a flexible storage system. Why waste space when you can use it. So I added an extra column Gridfinity Half Grid (by HuMa ) to the empty space. The Gridfinity bins can have a height…
Print approx. €4.36–€5.32 excl. taxPreliminary estimate for one variant
Gridfinity - Gorilla Glue Organizer 1x2x4 Gridfinity glue organizer. Holds super glue and normal gorilla glue bottles. Prints without supports. Color change at layer 28.2 for coloring in photo.
Print approx. €1.40–€1.71 excl. taxPreliminary estimate for PETGSource material: PET
Swatch sized to a Gridfinity bin to keep track of various types of infill. Same size as my Filament Colour Swatches . Brother DK-11204 Multi Purpose Label template included in the files. Print Settings in the swatches shown: Vertical…
Print approx. €0.17–€0.20 excl. taxPreliminary estimate for one variant
This is a storage tray for the E3d V6 Nozzle Fun Pack . It a 2x1 half height tray for the Gridfinity system by Zac Freedman . Though the pack already comes in a nice Altoids style container, this takes up less space and each nozzle size…
Print approx. €2.11–€2.58 excl. taxPreliminary estimate for one variant
This is a Gridfinity holder for the Panasonic Lumix batteries DMW-BLC12PP and DMW-BLC12E, used in the Panasonic Lumix FZ200 und FZ1000. It might fit more, but I can't really say which because I only have these two at home. ----- Dies ist…
Print approx. €0.65–€0.79 excl. taxPreliminary estimate for one variant
A container for Ring batteries, in the style of Definitive Collection of Battery Holders (Gridfinity, Stackable & Labelled) by xavierly (although this one is not stackable!) It holds two batteries in a 1x2 Gridfinity container. The base…
Print approx. €4.02–€4.91 excl. taxPreliminary estimate for one variant
This 1x1 gridfinity module holds a 35mm flashllight vertically. Prints without supports. Based on the Gridfinity System from Zack Freedman: https://thangs.com/designer/ZackFreedman https://www.youtube.com/c/ZackFreedman License: CC…
Print approx. €1.52–€1.86 excl. taxPreliminary estimate for one variant
Gridfinity 1x1 Atomizer Stands for 22,24 and 25mm Atomizers.
Print approx. €1.11–€1.36 excl. taxPreliminary estimate for one variant
A 5x2 Gridfinity bin for the Wahl model 9649 hair clippers. Print with draft quality settings with low infill, but ensure more than 2 top layers to avoid the pillowing in my photo.
Print approx. €4.89–€5.98 excl. taxPreliminary estimate for one variant
It is gridfinity . Based on my Fusion parametric gridfinity model so it comes with nice magnet holes, corner bases have them covered with 0,2mm to prevent edge lifting, 0,5mm clearance so it sits nice. 7 slots for chalk, just wide enough…
Print approx. €6.44–€7.87 excl. taxPreliminary estimate for one variant
Gridfinity Steel Ruler & Pencil Holder Due to myself only having a smaller build plate on my ender 3 I designed my own Ruler & Pencil Holder. As you will see I have split this so I can print it on my smaller plate. After printing and a…
Print approx. €9.18–€11.22 excl. taxPreliminary estimate for one variant
Today I designed a whole collection of Gridfinity bins tailored specifically for the drawer beneath my monitor. Each bin has a different purpose, turning the drawer into a clean, organized workspace: Pen Grabber Bin — holds 6 pens with…
Print approx. €5.61–€6.86 excl. taxPreliminary estimate for one variant
This is a very simple Gridfinity holder for allen keys with a grip. Sizes: 2 mm, 2.5 mm, 3 mm, 4 mm, 5 mm Length: 100 mm from tip to base of the grip, overall length should be around 150 mm Shorter keys could interfere with the base,…
Print approx. €4.46–€5.45 excl. taxPreliminary estimate for PETGSource material: PET
Get rid of the clutter and print up a couple of these in vase mode. Be sure to print plenty of solid layers so that vase mode works. I think about 6mm will do it.
Print approx. €1.85–€2.27 excl. taxPreliminary estimate for one variant
Stackable Gridfinity battery bin, size 1x2x5, for 9 CR2 batteries, or 10 batteries if you don't care about the ability to be able to stack the bins. The base box is generated with the Fusion 360 GridfinityGenerator,…
Print approx. €1.39–€1.70 excl. taxPreliminary estimate for one variant
Box für 7 Holzbohrer von 3mm - 6mm im Gridfinity Design
Print approx. €6.99–€8.54 excl. taxPreliminary estimate for one variant
Designed this simple prying tool and picks storage bin based on the Gridfinity system by Zack Freedman.
Print approx. €4.12–€5.04 excl. taxPreliminary estimate for one variant
Gridfinity base mount on 40x40 extrusion panel. Print in 45° angle and use default support.
Print approx. €0.75–€0.91 excl. taxPreliminary estimate for one variant
A 3x1 Gridfinity container for the Bosch GLM40 laser distance measuring device.
Print approx. €3.64–€4.45 excl. taxPreliminary estimate for one variant
Gridfinity battery bins for CR2025-batteries. The bins can be stacked. Included bins: A 1x1x4 bin that fits 10 batteries. A 1x2x4 bin that fits 20 batteries. The base box is generated with the Fusion 360 GridfinityGenerator,…
Print approx. €0.75–€0.92 excl. taxPreliminary estimate for one variant
Stores 2k epoxy syringe + spatula for mixing + mixing area in front. Size is 5x1x4.
Print approx. €5.21–€6.37 excl. taxPreliminary estimate for one variant
A Gridfinity box (size 2x3x4) for storing the original Prusa Accelerometer , designed for the Prusa CORE ONE 3D printers. The case is printed in two parts, the Gridfinity box and a cable holder snap-on to keep the accelerometer cable in…
Print approx. €2.25–€2.75 excl. taxPreliminary estimate for one variant
This holder ensures secure and convenient storage for your rotary cutter, allowing quick access whenever creativity strikes. Contains magnet holes and can be stacked.
Print approx. €9.61–€11.74 excl. taxPreliminary estimate for one variant
This is a bin designed specifically to hold the 7.2v Makita DF012D power screwdriver for Zach Freedman's Gridfinity system. It may also fit the impact version (TD022D), but I don't have one available to verify. If you are unfamiliar with…
Print approx. €13.82–€16.90 excl. taxPreliminary estimate for PETGSource material: PET
Vase Mode: Set >6mm of solid base layers. Vase Mode is hard to find in Gridfinity multi-square configurations, but for good reason. The space in the base makes you print about 5mm of solid base layers to make it work. Unfortunately,…
Print approx. €1.79–€2.19 excl. taxPreliminary estimate for one variant
