Gopro mount for Hubsan H501s
Gopro mount for Hubsan H501s Infill : 30% Support : Yes I use PLA i thing it is good with a ABS and PETG
Print approx. €2.95–€3.61 excl. taxPreliminary estimate for one variant
- Downloads
- 30
- Likes
- 3
- Rating
- 5
68 models
Gopro mount for Hubsan H501s Infill : 30% Support : Yes I use PLA i thing it is good with a ABS and PETG
Print approx. €2.95–€3.61 excl. taxPreliminary estimate for one variant
lost two feet of my chair in a trip, was already sinking into wet ground a bit before, found the original file and made the inner diameter smaller then removed the holes 2024/10/8 update: revisiting the file because I need to print a set…
Here's my adaptation of Peter H's ball feet to the cheap copy Decathlon made of the Helinox chairs. The original robber feet sink in everything, but I still wanted to keep them on my chair. So, I made use of the hexagonal shape of the…
Ursprüngliche Idee war die mobile Stromversorgung meines TS101 Lötkolbens mittels 18V LXT-Maikta-Akkus, wovon ich mehrere besitze. Geendet ist das ganze dann in diesem Projekt. Ein mobiles Laborletzteil mit mehreren Spannungsausgängen und…
Wallmount for Mercusys Halo H50G Mesh AP, airvented
I remixed Kalcemo's Bambu X1C Chamber Hygrometer to hold a Govee Bluetooth Hygrometer Thermometer H5075 I had laying around. It's visible from the P1S camera for when I'm not within bluetooth distance. I printed this at 0.1mm layer height…
A small box for a multimeter that clips onto universal hooks like these https://www.printables.com/de/model/323748-skadi I've made it for my WH5000A (86mm wide, 40mm deep) but it should fit a lot of different models. Printed in PETG with…
Govee Hygrometer (H5075) Magnetic Mount (12x3mm Magnets) For mounting Bluetooth connected Hygrometer in printer, drybox, etc. H5075 keeps history so you can keep track of dry box humidity and temperatures over time. No support Press the…
holder for wall mounting
This is a wall mount bracket for the Govee H5075 thermometer. It uses two 3M medium command strips to attach to the wall. The strips are hidden behind the thermometer and the bracket has an opening to allow easy for removal of the strips.…
Mount your Govee H5075 Digital Hygrometer Thermometer onto the door of your Bambu Lab P1 Series or X1 Series printer to conveniently monitor the enclosure's temperature and humidity.
The original hygrometer and thermometer that comes with the Original Prusa Enclosure is hard to read in my room as I leave the lights off most of the time. I wanted to be able to create a mount that I can use the LED light from inside the…
My version of a DPH5005 case. It is done in OpenScad so it is easily modified. All connections are in the front and rear panels.This has a 4 jack powerpole input on rear. The top two inputs are used as an on/standby. I use an old XBOX 12V…
Print vertically, no supports needed.
I made this mount to hide the sensor and be a snug fit. I used a small piece of double sided tape.
Feet support for bigger surface area for the QUECHUA MH500 chair. ( or potentially other chairs with a 22mm OD leg.) this model can be used with the original legs, no modification or removal needed on the chair itself. due tight…
To be installed on 58mm Adapter for DSC-H1, DSC-H2, DSC-H5 and other 2 aperture size available, 85mm and 90mm Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.2 Infill: 100% Filament: Generic…
A case for Nucleo-H503RB, with opening for USB-C ports. 2 versions, one is shorter, exposing the top parts (pin headers), the other one is longer, covering the top parts. Should fit most USB-C cables. Only for Nucleo-H503RB and similar…
Never let anyone else take your bottle by mistake. Especially useful when both your kids want the same exact bottle and then they can't agree who owns which. Or when they loose those bottles at school Sized to fit Decathlon 900 Ecozen ®…
Printing PETG filament
After converting all the power tools in the woodworking shop to the Osvac Neo system, the main piece was missing: the suction part that goes from the Lavor Pro Em Worker vacuum cleaner to the Dust Commander. The Lavor's corrugated hose…
Replacement Bracket for WH-CH500 (tested only for this model; might work for similar models) The Bracket folder contains files for the piece without the connected part. The Bracket Whole folder contains files for the piece with the…
Ersatzmundstück für den Beurer Inhalator IH50. Zu drucken in PETG da dies in der Spülmaschine gereinigt werden kann. Mundstück sitzt ein bisschen stramm trotz 0,4mm Spiel im Durchmesser. Perfekter Sitz kann durch schleifen oder anpassen…
Govee Holder to any Pole with a diameter for 16mm (mine is pretty Tight). Printed in ASA!
One of my friends crashed his drone and as a result one arm broke. So i designed two parts that support the two broken pieces of the drone. Its operational as before. One of my concerns was the additional weight of the printed parts so i…
I designed this case to house both the DPH-5005 as well as a laptop power supply. Thanks for Looking! Parts List: DPH5005-USB ASUS Laptop Power Supply Model A15-120P1A Power socket with rocker switch 15A (From Amazon ) M3 Button Head…
The holder is designed for mounting the Mercusys Halo H60X, H50G router without the use of screws or drilling. It utilizes the space between the electrical socket and the wall , where it is pressed in using a wedge , ensuring the…
I printed from TPU 95A and ironed the top surface to make it more smooth. Should work well, will see over a few months how it works out. Fits a ton of models: 16019-008, 13251-33110, 168-14184-00-00 1973 Kawasaki F11 250 1974 Kawasaki F11…
In order to mount the H500 on the back of my TV cabinet -- out of sight -- I designed this wall mount. The screw holes are designed for 4mm screws. Print with 100% infill so that the "spine" is strong and supports the weight of the H500.
Con esta pieza se pueden sustituir las chapas extraíbles de los puertos PCI y aprovechar ese hueco para colocar un ventilador, ya sea para extraer el aire caliente de la GPU o meter aire fresco. Ahora mismo el modelo está hecho para un…
Was moving around my workstation and somehow lost one of the foot pads. Rather than rip the others off and let it go, I ripped off the rest and made replacements. I used some double-sided tape to stick them on, but I'm sure you could add…
Quechua MH500 0.8L water bottle wall bracket
Used to replace control lever on PTH50 Crown pallet jack. I printed in PLA and so far is working well. Can use stronger material if needed.
Remix of the excellent model by @jharris, https://www.printables.com/model/306421-replacement-fan-craftsmanhusky-air-compressor I resized it for a 14mm shaft and added a block to fit the D Spindle shaft. Printed in PETG with .3 layer…
I've relocated my screen to the front of my enclosure so was going to just print a cap for the 4040 rail, figured I'd design and print a mount for my Govee thermometer instead I have a left side mount that just has two holes for where the…
MZ-EH50/70 Battery Sidecar A battery sidecar for the MZ-EH50/70 mindisc player. Device functions similar to OEM sidecars, with the intent to use this design as the basis for other sidecar builds. The build uses the following: 2xM2x10mm…
The holder is designed for mounting the Mercusys Halo H60X, H50G router without the use of screws or drilling. It utilizes the space between the electrical socket and the wall , where it is pressed in using a wedge , ensuring the…
Print in whatever you want, PLA+ is plenty strong and add whichever 2mm T-Nut design you like the best. Align the 3 T-Nuts with the slots in the Skadis board and then spin the machine screw heads to lock them in place.
A replacement battery door for MZ-EH50/70 (and likely other Sony devices) that use gumstick batteries. This part is printed with a .2mm nozzle and a .06mm layer height with painted-on supports everywhere there is the slightest overhang.…
About Not an exact match for Kawasaki Part Nr 11012-011 as I didnt have an original to work from, but this allows for the commonly circulated K&N style air filter. I didnt plan on getting the whole canister assembly, but wanted to make…
this prints allow you to create a GPU vertical holder for a Bykski N-ICH5090DX3-X Block in a BeQuiet! Light Base 900DX/FX Case, configured with a 28-30 mm thick radiator on the bottom of the case and a 25 mm thick fans on top of it,…
This part of our Quechua folding camping chair went missing. This breaks the chair, so I decided to make a 3D-printable design for it. And it works! Print settings: PETG 0.10mm detail Supports everywhere Infill 15%
A bracket to hold the Brother E550W/PT-H500 label printer (P-touch system) on a Multiboard wall. Note: This will not work with the Brother P-Touch E560 which is slightly larger. You need two or four Multibuild Lite Fix Points to attach…
WORK IN PROGRESS!!! I made this angle adapter, because the original bag design is really bad in thight spaces. After some measurements and 5h of work the angle was ready. Its friction fit at the planer and screwed at the other end with…
This adapter, adapts the original electronics board mounting holes, of the Hubsan H501M X4 Air Basic Edition, to a 20x20 stack. The original mounting holes were 40x90 mm, so i made this quick little thing, and it does the job.
This is a remixed keyhole hanger for the Govee H5075 Hygrometer/Thermometer . I made a few small but practical changes to the original hanger design to allow the thermometer to be more easily and consistently oriented when hung,…
This is a replacement top plate for the WH5000A / AstroAI multimeter (and similar models). Unlike the original flat plate, this version includes an eyelet so you can hang the multimeter on a hook on a pegboard or IKEA SKÅDIS/ Skadis Board…
he second drawer divided into two parts Cassette L230 l75 H50
I needed to mount 2 of this in a constrained space so I went with a double decker. Model avoids the chip as much as it can since the chip can get hot during motor stalls. It also leaves enough space for venting and heatsinks. I had to…
Necessary parts (or their analogues): - Aluminum Electrolytic Capacitor Panasonic EEUFR1A222L - 10 pieces; - Screw DIN 912 M2.5x20 - 4 pieces; - Copper wire Ø1.6 mm - ~0.4-0.5 meters. P.S. The photo shows a prototype, and there were no…
A quick way to add a Govee H5075 to your rack! Hardware needed. (McMaster-Carr links) 4 X 90695A035 (Comes in a package of 100) https://www.mcmaster.com/90695A035/ 4 X 91290A144 (Comes in a package of 100)…
Printing The original throttle tube has some large features included to hold the factory grips in place. I was not planning on using OEM grips, but did not want to destroy the original tube to accommodate aftermarket. Even so, I figured…
I needed to mount it to the glass with double-sided tape. However, the tape couldn't support the weight, so I scratched
I had been just throwing my headset on my desk for years. Now I can cleanly hang them up off the front of my Cooler Master H500M case. Simply remove the front panel and unscrew the existing mesh panels and swap in the printed…
Even if you're in nature, good lighting is always appreciated in dark scenarios (for humans and mosquitos). What makes it even better, is not to worry about always carrying lights and lamps into your roof tent, because this lightbar is…
50% keyboard Has 55 keys, uses 2 2.75U spacebars(Big Shift Key) Favorite Board ive designed, use every day. need 4 M4 Heat set inserts, 4 M4x8mm Bolts. Type C Pro Micro This model has been printed using PLA, PLA+, Resin, & ABS. Resin Had…
Removed all perimeters, infill at 20%. I used cubic infill, but it should work with other infill types.
this is intended as a replacement for the original feet, to prevent the chair feet from digging into softer ground. printed in TPU with layer height of 0.3mm, 3 walls, 5 top/bottom layer and 35% infill turned out great. you can play with…
Adapter vers woofer TCP115-8 4", et tweeter ND16FA-6 5/8"
This part of our Quechua folding camping chair went missing. This breaks the chair, so I decided to make a 3D-printable design for it. And it works! Print settings: PETG 0.10mm detail Supports everywhere Infill 15%
50% keyboard Has 55 keys, uses 2 2.75U spacebars(Big Shift Key) Favorite Board ive designed, use every day. need 4 M4 Heat set inserts, 4 M4x8mm Bolts. Type C Pro Micro This model has been printed using PLA, PLA+, Resin, & ABS. Resin Had…
Govee Holder to any Pole with a diameter for 16mm (mine is pretty Tight). Printed in ASA!
This is a remixed keyhole hanger for the Govee H5075 Hygrometer/Thermometer . I made a few small but practical changes to the original hanger design to allow the thermometer to be more easily and consistently oriented when hung,…
I needed to mount it to the glass with double-sided tape. However, the tape couldn't support the weight, so I scratched
A bracket to hold the Brother E550W/PT-H500 label printer (P-touch system) on a Multiboard wall. Note: This will not work with the Brother P-Touch E560 which is slightly larger. You need two or four Multibuild Lite Fix Points to attach…