Search results: helf

Sort order

11,065 models

P
PrintablesRyan Millar

Honeycomb Display Shelf (No Supports Required)

Two versions of the a display shelf that have customizable “grills” (or support walls). Notes: If printing this on a Prusa MK3S+, then the .stl files MUST BE SCALED to 85%. The grills were designed to snap in place without the need of…

Downloads
33,788
Likes
17,593
Rating
4.94
P
PrintablesTom

Topology optimized shelf bracket - holds over 80kg each

Strong shelf brackets designed to hold a 300mm deep shelf board! These were made with Fusion 360's topology optimization feature for the unique look, but they're definitely not too shabby in the strength department, either. Each one holds…

Downloads
16,512
Likes
4,050
Rating
4.93
P
PrintablesRyan Millar

Display Shelf Wall Assembly (No Supports Needed)

These two models can be combined to make as large or as small as a display area as you need. Both being based on the same hexagon base, they fit together perfectly. Print as many as you like and display all of your awesome prints and/or…

Downloads
10,533
Likes
4,380
Rating
4.95
P
PrintablesMikolas Zuza

Smoothed topology optimized shelf bracket - Flat & thicker back, smoothed body

I love the look of these shelves, check how Tom created them: However, I wasn't a fan of the uneven and paper-thin back (even though I believe mechanically it doesn't matter). So I've made it completely flat and a bit thicker. I also went…

Downloads
5,195
Likes
1,351
Rating
4.94
P
PrintablesKashimi

ENDLESS customizable, interchangeable shelf

This is a fully customizable modular cube that is wall mounted, you can print any number of module and interconnect each other to create anything you want. With it's many differents modules you can change plates to suit your needs, from…

Downloads
5,061
Likes
3,456
Rating
5
P
Printables3DPrintable

Shelf Chameleon

This cute chameleon is perfect to give some color to your shelves or just as a decorative piece for any room. We suggest to cut this model in three separate parts and then glue them. This allow you to scale the tail to fit perfectly to…

Downloads
4,525
Likes
1,872
Rating
4.67
P
PrintablesTinker

Shelf for IKEA Skadis

I couldn't find a shelf for Skadis that could be printed in one part and that fit on the Prusa Mini build plate. Inspired heavily by Ikea Skadis Shelf by xyren , I made one. The shelf uses 4 peg holes and more can be mounted next to each…

Downloads
3,160
Likes
593
Rating
4.86
P
PrintablesApex23

Ikea Skadis top mounting shelf

Looking for additional storage space and ways to extend the use of the Ikea Skadis organizer? This shelf mounts on top of the Ikea Skadis board and adds 190x 80mm of storage space without loosing the use of the upper holes. 4 shelfs will…

Downloads
2,530
Likes
652
Rating
5
P
PrintablesJKM

Corner shelf for thr bathroom

2024-01-23 update nová verze poličky - dno s motivem Voronoi + výška dna zvýšena __________________________________ Bylo nutné nahradit původní poličky a ve zdi zůstali hmoždinky, využilo se původního umístění šroubů (nejsou symetrické)…

Downloads
1,984
Likes
74
Rating
5
P
Printablestransformat

Folding Shoe Rack or Shelf - Print-in-Place

Folding Shoe Rack or Shelf - Print-in-Place When the whole family comes to visit again, just unfold your foldable shoe rack and the mess will disappear. It could also serve as a temporary shelf, e.g. for DIY projects. Printing Print the…

Downloads
1,664
Likes
626
Rating
4.92
P
PrintablesART TOO

SHELF BRACKET - SHELF HOLDER - (Tested)

Super strong shelf bracket, perfect to store your tools 3 sizes, let me know if you want an other size !!!

Downloads
1,611
Likes
830
Rating
5
P
PrintablesLYOTRADE

DeWALT / Makita drill gun shelf hanger holder

Lets hang your DeWALT / Makita drill gun under your shelf! Designed for DeWALT DCD791, but it works also with Makita 6270D and probably with other similar models from different brands. Be sure to check also my other DeWalt hanger holders:…

Downloads
1,216
Likes
215
Rating
4.92
P
PrintablesPixelowsky

Remixed Under Desk Shelf - Squared - Hex Bottom

I wanted to speed up the print time and save some material so I made the hex holes bigger.

Downloads
1,208
Likes
381
Rating
4.8
P
PrintablesFrasse16

Bathroom corner shelf - No drilling

This is a simple and easy to mount shelf for the corner of your shower. It is mounted with double sided tape and is big enough for 5-6 normal sized bottles. The design is sleek, simple and has a feeling that it is floating. There are…

Downloads
1,082
Likes
395
Rating
4.94
P
PrintablesAndreas G

RAID Shelfs for 3.5 (and 2.5) drives

Inspired by the 2.5" version: https://www.printables.com/de/model/212758-25-inch-hddssd-caddy-for-multiple-drives I designed a similar one for 3.5" drives.

Downloads
977
Likes
330
Rating
4.83
P
PrintablesBiomech

Beautiful filament rack shelf

Filament rack (shelf) with 28mm rods. This is common size of wooden rods, plastic pipes and metal pipes you can buy in hobby market. There is 5mm mounting hole intended for 4.5mm screw.

Downloads
967
Likes
145
Rating
5
P
PrintablesBoogie

Shelf bracket 150 mm (lighter version)

Shelf bracket for M6 screws 150 x 150 x 50 mm 10 mm wall thickness 100 mm screw distance

Downloads
871
Likes
106
Rating
4.83
P
PrintablesNautilus Forge

Modular filament spool rack - reversible shelf bracket

⚒ No 3D printer? No time to source components? I just opened my new e-shop where you can buy physical, ready-to-use versions of my models! Designed with passion, printed and assembled with care ⚙. 📦 Shipping across the EU: 👉 Get it at…

Downloads
802
Likes
135
Rating
4.8
P
PrintablesAlteRob

Shelf Support Pegs (4 & 5mm pins)

Quick printing replacement part, even in PLA they can take a good bit of weight. These would be a bit stronger printed in 0.3 instead of 0.2 and with more infill, but if weight is that critical, your probably better off ordering metal…

Downloads
793
Likes
78
Rating
5
P
Printables75echo
Downloads
758
Likes
164
Rating
5
P
PrintablesSamanthaF

IKEA Milsbo shelf holders

The IKEA "MILSBO" display cabinet is a popular solution for displaying plants and treasured objects. I use mine for my LEGO collection! These STLs are replacement parts for the shelf brackets which hold up the shelves in the MILSBO…

Downloads
729
Likes
35
Rating
5
P
PrintablesThenurbs

GenD03_ShelfBracket

The shelf bracket was inspired by generative design. The original generative design calculation has been simplified and strengthened in the VR environment and optimized for 3D printing (no support required). Software used: Fusion 360,…

Downloads
684
Likes
336
Rating
4.86
P
PrintablesCygnusX1985

IKEA Rudsta shelf holder

I printed it in the given orientation using 0.2mm layer heights and supports only from the build plate.

Downloads
599
Likes
25
Rating
5
P
Printablessternli27

Spray Can Holder under desk shelf mount

https://cad.onshape.com/documents/40d51bf297adf9ff085f1347/w/89f6cf7b46e7ffc898b86539/e/e9b1dbad4eb93cf131bb9408?renderMode=0&uiState=6371440cd2b56a532bb9f445

Downloads
583
Likes
115
Rating
5

Bins with Label Shelf - For Harbor Freight Medium Parts Organizer

Background The natural state of every garage or shop is disorder and its a constant and never ending battle keep some semblance of order. A good organization system helps with that. As a maker I also found myself buying lots of assorted…

Downloads
492
Likes
131
Rating
5
P
PrintablesJERRY

Recreation for the Tonie HIVE - Modular Hex Shelf for Toniebox

Recreated the Model because its original fit was very loose with 0.5mm clearance per side. I tighten up the clearance to 0.1mm per side for a very nice selfholding fit.

Downloads
479
Likes
55
Rating
0
P
PrintablesMolodos

Miniature filament shelf with spools

Use your filament leftovers to print a shelf with small filament spools for decoration or use it as dollhouse furniture for the perfect makers dollhouse! You can also use it for small filament color samples. Features Simple assembly No…

Downloads
471
Likes
383
Rating
4.86
P
PrintablesAsphalt3D

Slide-on Under-Shelf Tissue Box Holder

Store a tissue box under your cupboard, cabinet, bookshelf, or desk to free up space. No more fumbling around to reach the last few tissues deep in the box. With this holder's upside-down orientation, grabbing tissues becomes a breeze,…

Downloads
437
Likes
210
Rating
5
P
PrintablesCelta

Wobble-Free Shelf Brackets

Brought home a bargain shelf, only to find it's a bit wobbly? Don't fret! These 3D-printed brackets are your wobble-busting heroes! This design features both left and right brackets , each securing the shelf with 4 screws (2 vertical, 2…

Downloads
389
Likes
309
Rating
0
P
PrintablesTurbopstros

IKEA SKADIS Shelf with Honeycomb Pattern

IKEA SKADIS Shelf with Honeycomb Pattern Dimensions of the bottom part of shelf (plus outer brims and hooks..) 20 x 120 mm 30 x 120 mm 30 x 160 mm Sliced with the modifier to expose the infill pattern You can freely change the infill…

Downloads
385
Likes
50
Rating
5
P
Printablespesidrink

4 tier fragrance shelf

fragrance shelf 4 tier shelf

Downloads
368
Likes
144
Rating
5
P
PrintablesMrViddy

Benchy Shelf Display Rack Holder

Push and twist right in place. Sits firm in place for no wiggle or movement. Holds in from the 9mm hole in the back of the Benchy. Holds 7-3 Benchys Screw/Tape option (4mm Screw Hole) 20%infill No supports STEPS: Rotate Benchy to the…

Downloads
327
Likes
84
Rating
4.25
P
PrintablesStuH583

Ford Puma Parcel Shelf Clip (UK Models)

A replacement clip for the Ford Puma parcel shelf in the UK

Downloads
294
Likes
10
Rating
5
P
PrintablesBodo Runde

Playmobil shelf - IKEA Trofast

My kids wanted to have some more furniture for their Playmobil. Looking around there was this Dollhouse cupboard with drawers which looks really awesome. Yet my kids wanted something different, therefore I started modeling on my own.…

Downloads
288
Likes
62
Rating
4
P
Printablesthatgerhard

Mazda 3 2008 MPS Parcel Shelf Clip

Mazda 3 2008 MPS Parcel Shelf Clip Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: Doesn't Matter Supports: Yes Category: Automotive

Downloads
258
Likes
21
Rating
0
P
Printablesdoppelkeks

SkadisContinuousShelf-L

I use the continuous shelf to put my Cobi tank models on display. Depth is now at about 17.5 cm.

Downloads
257
Likes
28
Rating
4.67
P
PrintablesBob the Builder

LEGO Brick 4 shelf (5x original size)

The Lego brick shelf for kids room decoration is honestly just a copied version of Lego's original set of 4114 shelves (that is 10x scale). I made this to be able to print it and let you decor your kid's room for less price than buying…

Downloads
240
Likes
50
Rating
5
P
PrintablesWanderWardr

FIFO Can Shelf XL

A First-In-First-Out dispenser for food cans. Snaps together for hardware-free assembly. The modular design can be expanded to be as large and as small as needed. Please read the instructions before printing, as this design is quite large…

Downloads
222
Likes
48
Rating
5
P
PrintablesModMonster

Undertale "Despite everything, it's still you" Text Box with mirror and shelf stands

This model requires you to print the main text box and then optionally any of the 3 attachments which slide into the back of the text box. The stand mount is designed to allow the model to stand on its own on a table or shelf (see picture…

Downloads
215
Likes
35
Rating
0
P
PrintablesVastasStudio

Wave Shelf

A shelf inspired by the shape of waves for storing towels. Dimensions of the shelf (LxWxH) 220mm x 102mm x 10mm Height for doble-sided tape 17mm Material PETG or Any Mounting: Add pieces of 10mm double-sided tape ( 3M tape recommended )…

Downloads
208
Likes
154
Rating
5
P
PrintablesDavid

VW california t6.1 shelf holder

Print with supports sideways, PLA was tested and works nicely in Cali.

Downloads
201
Likes
9
Rating
0
P
Printablesharaldan

Two-level monitor shelf stand

Having found a monitor stand design that I liked, I wanted to make it more flexible, and so I added brackets for a second level. My model uses a shelf I had lying around, which was 16mm thick and 170mm wide. I cut it into two pieces to…

Downloads
196
Likes
78
Rating
0
P
PrintablesGeorge Duma

honeycomb shelf bracklet

a simple shelf bracklet with a honeycomb pattern

Downloads
191
Likes
40
Rating
4
P
PrintablesBoPrinting

Shelf Pin Jig 5mm - Lochreihenschablone 32mm / 5mm

Die Lochschablone hat einen Abstand von 32 mm und einen Bohrungsdurchmesser von 5 mm . Zusätzlich werden 4 Kugellager 625 benötigt. This Shelf Pin Jig has a spacing of 32 mm and a bore diameter of 5 mm. Additionally, 4 ball bearings 625…

Downloads
176
Likes
20
Rating
5
P
Printablestom

Zippo-Ablage/ Zippo shelf

In diesem formschönen Halter finden 4 kleine und 4 große Zippo-Feuerzeuge Platz. Die Ausschnitte sind 33 x 13 mm bzw. 40 x 15 mm groß. Da das Modell nicht besonders stabil sein muss, habe ich im Prusa Slicer je 3 Perimeter vertikal und…

Downloads
174
Likes
30
Rating
5
P
PrintablesXDEnte

Robuster Regalwinkel für DIY-Regale – Sturdy Shelf Bracket for DIY Shelves

Deutsch: Stabiler und schlichter Regalwinkel zum Befestigen von Regalbrettern an der Wand. Das Modell ist in zwei verschiedenen Größen verfügbar: 210 × 250 mm (für größere Regalbretter oder höhere Belastung) 160 × 190 mm (für kleinere…

Downloads
154
Likes
19
Rating
5

shelf for small things

A miniature shelf allows you to place small things. PLA/PETG plastic. Consists of 3 or 4 shelves fastened with 12 racks. 4 plugs are used as legs and top covers I think the assembly will be clear from the above drawings. Parts are held…

Downloads
152
Likes
50
Rating
5
P
PrintablesST3V3DDRUCK

Bathtub Corner Shelf Voronoi

Needs to be mounted with double-sided tape (or something like UHU Patafix) because i didnt want to drill holes into my bath tiles The rescale version is to fit on a Prusa MK4

Downloads
148
Likes
24
Rating
0
P
PrintablesArtem

Adjustable rope shelf module

Adjustable rope shelf module A small module for an easy hanging shelf on a rope How to use ? You will need a M6 screw for block the rope into the module, you can lose the screw a little for adjusting the position

Downloads
145
Likes
195
Rating
5
P
Printablesgdownton

Bose Companion 2 Speaker Wall Shelf / Shelves - Versions 2-4

Version 1 of these shelves (https://www.printables.com/model/134832-bose-companion-2-speaker-wall-shelf-shelves) has shorter sides such that the cantilever dips 1-1.5mm. They hold up for at least 10 months in service but I wanted to make…

Downloads
141
Likes
19
Rating
5
P
Printables3dprints4life

Shelf Bracket Drywall Construction / Konsole - Regalhalter Trockenbauwand 17cm x 17cm

EN: The bracket is suitable for mounting 20 cm wide shelves on drywalls. M5 dowels can be used as cavity dowels. The hole can be subsequently extended for larger M6 dowels. If you like my model(s) please leave me a like to support my…

Downloads
140
Likes
18
Rating
5
P
Printablestom

Abklappbare Ablage (Regal)/ Small fold-down shelf

Um eine elektrische Luftpumpe im Kellerraum aufladen zu können, musste ein Regal in der Nähe der Steckdose her. Da diese Ablage meist keine Funktion hat, sollte sie möglichst wenig Platz einnehmen. Die Konstruktion kann deshalb flach an…

Downloads
139
Likes
14
Rating
3
P
PrintablesDel_aide

ArtDeco Shelf Support

Support for shelves. You have to make support for horizontal inner parts, You can put them for the circles too, but it is not necessary. It is not the best model, It needs sanding a little, but the result looks great on the wall, I…

Downloads
132
Likes
40
Rating
0
P
PrintablesMacronot

Ikea Expedit/Kallax shelf Headphones holder (updated)

After using this for sometime, I have added a hole to the side and screwed it place with a wood screw . Updated Increase the walls of the shaft to increase strength. Redone the tapering to print better Settings Supports under the crossed…

Downloads
123
Likes
39
Rating
5
P
PrintablesPatrice_C

Etagère circulaire - Circular shelf

Salut, 2 pièces à imprimer pour réaliser une étagère “cercle” Pour les étagère en bois (ou en impression 3D), il faut 5 pièces d'épaisseur 8mm : horizontal dessus 120mm horizontal milieu 72mm horizontal bas 86mm verticale droite 112mm…

Downloads
122
Likes
67
Rating
5
P
PrintablesSweet1227

Dry Box Dessicant Shelf for Cereal Box

I love Prusament, but got tired of the dessicant balls getting stuck in the Prusa Hexes on the spools. I have regular kitchen cereal dry boxes and used to keep the bottom filled with dessicant. Now this shelf separates the spool from the…

Downloads
116
Likes
19
Rating
4.5
P
Printableskro

4 grid honeycomb + shelf

A smaller grid for small printer or people want to try out the honeycomb storage wall before printing the entire model and a small shelf for you to display your printed models you need to print the hook insert from the original model if…

Downloads
113
Likes
28
Rating
0
P
PrintablesShmidtey

Leg extension for home depot HDX storage shelf/rack

This is a leg extension for the HDX storage shelving unit from home depot. It extends the height by approximately 100mm. I printed mine with my Prusa Mini+ in PETG at 0.2mm layer height, no supports needed. The fit should be a lightly…

Downloads
112
Likes
14
Rating
3
P
Printablessteffenbew

Tefal Snack Collection Storage Shelf

Storage shelf for up to 8 plates for the Tefal Snack Collection waffle / sandwich maker. I added the support beam after I printed the body to reinforce the structure. An improved model could have wider carriers and better support…

Downloads
105
Likes
16
Rating
5
P
PrintablesRahul

Fridge Storage Divider – Shelf Organizer

Keep your fridge tidy with this simple storage divider! Designed to separate items like bottles, sauces, snacks, or leftovers on fridge shelves. just print and slot it into place, no tools needed, and works with most fridges but designed…

Downloads
96
Likes
31
Rating
0
P
PrintablesYamiGhor

Folding shelf

Easy to print folding shelf for reduced spaces like campers, caravan or whatever and with no holes! RECOMENDATIONS Printed with PLA. Infill 20%. I used 0.2 layer. 2-3 wall count. The support face flat so the double face tape will stick…

Downloads
93
Likes
40
Rating
0
P
PrintablesVorpal

Dacia Duster 2018 parcel shelf/trunk cover cord washers

Replacement washer for the cords for the parcel shelf/trunk cover of a Dacia Duster 2018+. The factory rubber bar thing is not very well made and easily falls out, it is basically a rubber cross bar that you slide over a knot in the end…

Downloads
91
Likes
9
Rating
0
P
Printablesredtahr

shelf hoook/bracket for the outside of metal shelving frames

printed a few others from around the place, but as ever, couldn't find one that was just right, so we designed our own. two versions, one with a two mm gap, which wobbles a little, one with a "spring" to make things wobble less. think…

Downloads
91
Likes
18
Rating
0
P
Printablesaspiring_maker

woozoo fan bedpost shelf

I designed this shelf to support a round woozoo fan on a square bedpost (2.25" or 57mm). I was planning to print it flat on the bed up-side-down, but it has a 220mm diameter. To fit it on the 250x210mm Prusa bed, I had to print it at a…

Downloads
84
Likes
3
Rating
0
P
PrintablesPrinter4496

IKEA SKADIS Shelf Edge or Whiteboard Mount

Model Description I already have a whiteboard in my office and I didn't want to drill new holes in the wall to mount an IKEA Skadis pegboard. Since I couldn't find a suitable solution for attaching the pegboard to a whiteboard, I created…

Downloads
78
Likes
5
Rating
0
P
PrintablesMax Aalderink

Argon Neo 5 shelf

This is a shelf for the Argon Neo 5 (with NVME expansion) case for the Raspberry Pi 5. It has a ventilation duct in de back for case fan exhaust and a perforated bottom for the NVME heatsink. The mounting holes are designed for M3…

Downloads
75
Likes
4
Rating
0
P
Printablesjen.e.moore

Shelf divider

A simple, lightweight clip-on shelf divider for some 5mm glass shelves. Based on the design of the wire ones you can get from The Container Store, but I didn't want to try the metal on glass shelves. Created in OnShape; there's a larger…

Downloads
73
Likes
22
Rating
0
P
PrintablesPavel Hanuš

Podpěra pro poličku (shelf holder)

Podpěra pro poličku (shelf holder) 140x150 mm

Downloads
71
Likes
6
Rating
0
P
PrintablesTELDON Computer

IKEA LACK enclosure shelf support

I added a 3rd Lack table under the enclosure makig it taller and also put wheels. Whe long legs are simply original ones screwed together with original ikea double-screw. Put 2 very long screw from under the lower table for keeping in…

Downloads
69
Likes
27
Rating
5
P
PrintablesjackTfrost

Ikea Trofast Shelf (small) Paint Holder Drawer

First I want to let you all know that this is my first ever designed 3D project. I know it is not perfect but it works great. I hope that some of you can take this and improve it, I am excited to see what you can do with this. As I got in…

Downloads
68
Likes
26
Rating
0
P
PrintablesWilsonayr

Another Generative Shelf Bracket - easy print, 50+ lbs, and support free

Decided to try my own generatively designed shelf bracket that is easy to print and mount. I designed it to support a minimum of 50 lbs./bracket and I have been able to exceed this in testing using PLA with 2 perimeters and 20% grid…

Downloads
68
Likes
30
Rating
0
P
Printablesmscalora

SHELF RELIANCE - FIFO Canned Food Organizer custom dowels

My wife got some pantry shelf food organizers from the company named Shelf Reliance , they are a product in the FIFO Collection . They work great except for oddball can sizes so I made a design to print my own dowels. Print without…

Downloads
66
Likes
1
Rating
0
P
PrintablesKnoxyboy

Simple small shelf

I wanted a place to put my 1L isopropyl alcohol bottle and microfiber cloth, so I made this simple shelf. Holes are for 3.5mm countersunk screws. Inner dimensions (mm): LxW - 104x89 Outer dimensions (mm): LxWxH - 110x95x60

Downloads
65
Likes
6
Rating
0
P
PrintablesMaYo

hex bathroom shelf organizer with drainage v1

ENGLISH Bathroom organizer/shelf for shower gel, razor, soap, washcloth, hairbrush and much more. The sloping base plate allows the water to drain to the front. Water no longer accumulates under objects that are on an elevation. It stays…

Downloads
63
Likes
18
Rating
0
P
PrintablesFaGrie

Shelf holder organic - Regalhalter organisch - shelf bracket

Regalhalter für Holzbretter, sehr stabil und im Design ansprechend. Versteckte verschraubung für 3-3,5mm Schraubendurchmesser. Shelf holder for wooden shelves, very sturdy and attractive in design. Hidden screw connection for 3-3.5mm…

Downloads
61
Likes
12
Rating
0

Modem/Router Shelf

Modem/Router Shelf Really simple modem shelf. The shelf is glued to the wall with "Pattex Mounting Glue".

Downloads
52
Likes
10
Rating
0
P
PrintablesNikola

IKEA TILLGANG Stackers for Draying Rack/Shelf conversion

Put them in the middle of the side, then slide them to the corners and lock them over the little lip (nip) bit or whatever it is the name of this little thing on under the corner, :). You will have a very stable set of stackable trays.…

Downloads
52
Likes
6
Rating
5
P
PrintablesDokkie

Insert into caravan shelf

Insert for a caravan shelf, which doesn't have a lip or anything so things fall if you open the door. The insert is cca 230 x 100 mm , with a cutout for a hinge. There are two versions, V1 and V2. V1 is what I printed and the walls are 2…

Downloads
51
Likes
21
Rating
0
P
Printablesmagnum80

Headphones holder for IKEA Expedit or Kallax shelf

Inspired by Macronot's design. I remixed it to fit my needs. Created with TinkerCAD. If I would do it again I would make it 0.1mm or 0.2mm tighter.

Downloads
49
Likes
12
Rating
5
P
PrintablesKlaus
Downloads
49
Likes
10
Rating
0
P
PrintablesLevoniust

old - Roller caster support for a plastic shelf unit - old

This version broke on my and I have remade it in Fusion 360. Please use this model insted!!! I wanted to easily slide a plastic shelf I had to get easy access to things on the back side. So I made this!!! after 4 revisions and 12 hours of…

Downloads
48
Likes
8
Rating
0
P
Printablesdankat

IKEA Bror Shelf - Hinged Door / Enclosure

Summary I have cats, and they are curious when the printer starts printing. So I needed a way to keep them out. What started out as taping some plexi glass to my IKEA Bror shelf turned into this. We'll see where it goes from here.…

Downloads
46
Likes
17
Rating
0
P
Printablesskivvie

IKEA Svalnas Shelf Brackets (for tape roll storage)

Shelf brackets for the IKEA Svalnas shelving system. These brackets hold a plank of wood measuring 75mm x 20mm (3" x ¾") on end at a slight angle and mount to the Svalnas rails using the stock mounting bolts. I use this to hold all of my…

Downloads
43
Likes
6
Rating
0
P
PrintablesLevoniust

Roller caster support for a plastic shelf unit

I wanted to easily slide a plastic shelf I had to get easy access to things on the back side. So I made this!!! after 4 revisions and 12 hours of printing I got this. Amazon.com: HDX 128974 36 in. W x 72 in. H x 24 in. D 5-Shelf Plastic…

Downloads
43
Likes
1
Rating
0
P
PrintablesJPMakesStuff

PiKVM v3 metal case under-shelf mount

The PiKVM v3 hat with metal case is really cool, but I needed a way to keep it off my workbench. This bracket allows the PiKVM to slip in and still have all the ports accessible. Plugging in one cable on the left and right inevitably…

Downloads
42
Likes
10
Rating
4
P
PrintablesJPMakesStuff

4v or USB Lithium or INKZALL Large marker holder under-shelf

Holds any combination of … - Ryobi 4v batteries - Ryobi USB Lithium batteries - Milwaukee INKZALL Large markers … or (with adapter) … - Ryobi quick change hobby knife - Sharpie ultra fine retractable marker - Ryobi fine point permanent…

Downloads
40
Likes
8
Rating
0
P
PrintablesHarabi

Shell Model Car Display shelf (1:41)

The model car shelf / display is designed for the 1:41 models what you can get from Shell. It has some space so you can put a slightly bigger car into it as well. The hole parameters: clearance, normal fitting, ISO M3 The track has only…

Downloads
40
Likes
8
Rating
0
P
PrintablesThe Consul

L Shelf

Very simple L shelf, with and without supports. Not for heavy weight items.

Downloads
37
Likes
4
Rating
0
P
PrintablesZatnaktel Cz

Shelf back hook

Hook should be mounted from the back of shelf in your wardrobe. Supports are recomended.

Downloads
36
Likes
18
Rating
0
P
PrintablesEcoDad

Wireless Mouse Shelf for QUBE 500

The shelf is designed for a wireless mouse like the my Logitech G Pro Wireless to hold the USB cable and wireless dongle when the mouse is in use and to store the mouse while plugged into the USB cable to charge.

Downloads
35
Likes
12
Rating
5
P
PrintablesBitScout

Shelf that goes on top of a brother HL-2100 or HL-2200 series printer

Requires: Four 3.5 mm x 30 mm screws A board or tablet of sufficient size (see below) Four pieces of 10 mm x 10 mm aluminium extrusion of equal length, roughly 10 cm are good. Your tablet needs at least a flat surface that is 370mm wide,…

Downloads
30
Likes
13
Rating
0
P
PrintablesDennis Judd

Dryer ball shelf

This is a remix but I put a lot of tweaks on it. I wanted something that could hold multiple sized balls but also attached to the wall near by. The STL is a solid piece that I split using the cut tool in prusasclicer 2.6 with 2 pins to…

Downloads
28
Likes
2
Rating
0
P
PrintablesMartijn Janssen

Holder for Bondhus 13389 (T-Hex) Set for 18mm shelf

For strength, as the set is quite heavy, use at least 4 perimeters (with a 0.4mm nozzle) and 30% infill. If your shelf is not very sturdy and strong and can't hold a M4x25 screw, you can drill the holes through the shelf and attach it…

Downloads
25
Likes
6
Rating
0
P
PrintablesOtty_Skipper

IKEA Tisken Plastic Ducks Shelf

It was just a fun project for my wife. "a happy wife is a happy life" Original rubber ducks also fit, but only the small ones.

Downloads
25
Likes
11
Rating
0
P
PrintablesdocRoot

Shelf Runner for Screenprinting frame drying and storage cabinet

→ cabinets for drying and storing screenprinting frames out of the sunlight… the cab is made of ¼ BB plywood with a gasketed door to keep out light. The top and bottom have a baffle and foam filtration material to allow ventilation but…

Downloads
24
Likes
4
Rating
0
P
PrintablesAndo Roots

Vitsoe 606 shelf T-nut

You need a M3 bolt + M3 threaded insert (OD 5mm, length 3mm…8mm). After printing, melt the threaded insert into the piece. Print “upright” for best quality (I found other orientations made the nut not fit exactly). No supports needed.…

Downloads
24
Likes
2
Rating
0
P
PrintablesEmily Unsworth

Desktop shelf for Stationary

This model can be used to hold basic office supplies like, stapler, pens, sticky notes etc.

Downloads
24
Likes
3
Rating
0
P
PrintablesRyanR

Tactix Organizer Box Drawer Hanger Shelf Bracket

This is a special bracket I designed to convert the organizer box trays in my Tactix storage box into sliding drawers. The lower trays slide out nicely, but the top two were designed to index into one another for some reason, meaning that…

Downloads
21
Likes
2
Rating
0
P
PrintablesLevi

Cosco Step Stool Shelf

Brackets that stick to the back side of a cabinet or door to store away a step stool. Uses the Command velcro strips to adhere to any surface. No need to drill holes. Print Settings: Transparent PETG 0.8mm nozzle 0.55mm layer height…

Downloads
21
Likes
5
Rating
0
P
PrintablesLaHo

Simple soap shelf

Another simple soap shelf. Use supports for shelf. Mount it with two 4x30mm screws.

Downloads
20
Likes
2
Rating
0