R2D2 - Star Wars Home Decor
Any feedback would be greatly appreciated . Nozzle: 0.4mm Layer: 0.16-0.2mm (Recommended) Supports needed (Paint-On Supports, Tree support) No Brim needed
- Downloads
- 9,067
- Likes
- 1,687
- Rating
- 4.84
5,938 models
Any feedback would be greatly appreciated . Nozzle: 0.4mm Layer: 0.16-0.2mm (Recommended) Supports needed (Paint-On Supports, Tree support) No Brim needed
Any feedback would be greatly appreciated . Nozzle: 0.4mm Layer: 0.08-0.24mm (Recommended) Supports needed (Paint-On Supports, Tree support) Brim needed Scale it as you like :)
An elegant attempt at rethinking a traditional Christmas tree Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters - for a stronger print) Recommended…
NOTE: This model is designed for a US Plug shape. I needed a simple & elegant wall mount for the HomePod Mini in the bathroom. I found several models on Esty ( SmartHomeEngineering & BurdProducts ) that I mostly liked but they didn't…
Any feedback would be greatly appreciated . Product page here: https://www2.hm.com/en_us/productpage.0812790001.html Nozzle: 0.4-1.0mm Layer: 0.2-0.8 (Recommended) No Supports needed Scale it as you like :)
Any feedback would be greatly appreciated. Nozzle 0.4-1.0mm Layer Height 0.2-0.3mm (Recommended) Infill 0-2% Perimeters 1 No Supports needed Scale it as you like :)
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) No supports needed Scale it as you like :)
Any feedback would be greatly appreciated . Nozzle: 0.4mm Layer: 0.08-0.24mm (Recommended) Supports needed (Paint-On Supports, Tree support) No Brim needed Scale it as you like :)
Any feedback would be greatly appreciated . Work in progress Use 6=9 Nozzle: 0.4 Layer: 0.2-0.24mm (Recommended) No Supports needed No Brim needed Scale it as you like :)
Marge and Homer Valve Stem Cap : Bike Cap Fits Schrader Valve Stems.
This is a wallmount for the Home Assistant ZBT-2 zigbee/thread antenna. The mounting holes are designed for M3 countersunk screws. Overall it has a snug fit and offers enough resistance that the antenna cant easily fall out of the mount.…
A waffle structure bowl! Easy to assemble and looks great in any place - can store decorative balls or fruits - depends on your liking. Print information: Recommended using a lower layer hight (0.15/0.2mm) and a smaller nozzle (0.4/0.3mm)…
🏚 Simple and elegant ceiling lines decoration. Or it can be used as a corner cable cover. Print instructions ⬢ Material: Prusament PLA Vanilla White ⬢ Layer: 0.2 mm ⬢ Dimensions (1pcs): 50 mm x 50 mm x 190 mm (1.97" x 1.97" x 7.48") No…
This model prints flat, then folds along the edges to form a rhombic dodecahedron. The inner sides snap together, as shown in the video below, to hold the shape without additional connectors. If you change filament mid-print, you will…
This is a decorative holder for NTAG215 coin-style NFC tags ( Specifically sized for these tags I purchased from amazon.ca ). The design allows for an appropriately-sized NFC coin tag to be embedded into the holder part during the print.…
Any feedback would be greatly appreciated . Nozzle: 0.4mm Layer: 0.08-0.24mm (Recommended) Supports needed (Paint-On Supports, Tree support) Brim needed Scale it as you like :)
No Supports needed. There is a hole for attachment at the birds head. The print files contain two turtledoves.
Welcome Home into your home! Recreate Wally's home from "Welcome Home" for your own home!
We have had this lamp proudly displayed in our home in our foyer for nearly a year now and we get lots of compliments on it! It is super easy to print. This lamp assembles from 12 sides all printed flat on the printer's bed, which then…
Any feedback would be greatly appreciated . Nozzle: 0.4mm Layer: 0.08-0.24mm (Recommended) Supports needed (Paint-On Supports, Tree support) Brim needed Scale it as you like :)
This is a funny Halloween-themed version of the popular motivational phrase “Live, Laugh, Love” that is commonly found as signs and such in home decor – put those away and make these “LIVED LAUGHED LOVED” gravestones for Halloween!…
El Chombo : Dancing Green Alien
Any feedback would be greatly appreciated. Nozzle 0.4-1.0mm Layer Height 0.2-0.3mm (Recommended) Infill 5% No supports needed Scale it as you like :)
Print it with 0.15mm layer hight and black matte PLA. The notch simplifies installation. This makes it easy to screw in. Use at your own risk.
This is a holder for an Apple HomePod mini that allows you to screw it into a standard recessed light fixture (or any other light socket). It not only mounts your HomePod mini to the ceiling but provides power! All without impacting sound…
Any feedback would be greatly appreciated. Nozzle 0.4-1.0mm Layer Height 0.2-0.3mm (Recommended) Infill 25% Add a some small Cylinders as Negative Volume for draining Print upside down Scale it as you like :)
Any feedback would be greatly appreciated. Nozzle 0.4-1.0mm Layer Height 0.2-0.3mm (Recommended) Infill 15% Supports needed Scale it as you like :)
This is the second version of the Sunflower. A little bigger and with improved petal connection. 29.01. Update: I upload a new STL for "Girasole 2.0 - Centro" Delete and don't print the old STL. EU and UK* Version Sorry for the…
Инъекционный пистолет со шприцем. Пистолет для уколов в домашних условиях. Производит автоматический резкий впрыск. Некоторые детали нужно напечатать отдельно и склеить между собой. Из-за сложности модели она требует корректировки деталей…
Considering the number of parents now needing to teach their kids at home, I designed this simple model to provide a visual learning aid for addition, fractions, etc. They also double as fun play cubes for robot making etc. These could…
A remake of the Raspberry Pi 4 B Case - Home Assistant. One centimeter longer so it will fit the sonoff 3.0.
This stylish candle lamp is designed to shield your candle from wind while ensuring it burns completely for more then 2 hours. The lamp consists of a base and a protective shade, both optimized for printing in vase mode, which drastically…
Instructions Print the cap and put it on a AA battery Stand the battery up on a neodymium magnet Take a piece of copper wire and bend it in the following shape (also see photos): Place the wire onto the battery and watch it spin! The cap…
Any feedback would be greatly appreciated . Nozzle: 0.4mm Layer: 0.2-0.24 (Recommended) supports needed Model for 3mm and 4mm mirror thickness Scale it as you like :)
Any feedback would be greatly appreciated . Nozzle: 0.4mm Layer: 0.2-0.32mm (Recommended) Supports needed (Paint-On Supports, Tree support) No Brim needed Scale it as you like :)
I saw this Video, and didnt find the 3D modell for it, so I made it. Sorry… If you love this design and want to see more fun projects like it, consider joining my club on Printables to help me keep adding free models for everyone to…
Any feedback would be greatly appreciated . Preview images rendered in Blender Perfect for miniature projects, modeling, dioramas, etc. Nozzle: 0.4mm Layer: 0.1-0.2mm (Recommended) Supports needed (Paint-On Supports, Tree support) No Brim…
Any feedback would be greatly appreciated. Nozzle 0.4-1.0mm Layer Height 0.2-0.3mm (Recommended) Infill 15% Add a some small Cylinders as Negative Volume for draining No Supports needed Scale it as you like :)
origin du model https://cults3d.com/fr/modèle-3d/art/man-torso-sculpture-stl-3mf-obj-free-3d-model par GuillermoMX Sculpture originale de torse d'homme imprimable en 3D 1 3MF, 1 STL, 1 dossier individuel OBJ Gratuit Sculpture originale de…
MSLA Cyclop Printer ! If you like my work, you can help me by buying me a coffee, thank you! https://buymeacoffee.com/guillaumehy or paypal.me/guillaumehaouy I should point out that I am a 20 year old student, it takes me a huge amount of…
Gehäuse für HomeMatic HM-LC-Sw1-PCB Funk-Schaltaktor 1fach. Zum Fixieren wird eine M3x5 Schraube benötigt. Ich habs mit PETG gedruckt…
This is a ESPHome based Hichi/Volkszähler interface specifically for the Holley DTZ541 that has alignment pins instead of the more common round indent around the IR interface. UPDATE 2023-01-29 Previously mentioned issues with the…
The Phomemo P12 Pro label printer has been great for aiding in my Gridfinity organisation. So I wanted to organise the tool which helped me organise. This model is a 3x2 Gridfinity bin which holds the Phomemo P12 Pro along with 2 label…
Pikatchu model for home decoration settings: no supports 0.2 quality PLA-ABS-PETG-TPU filaments are good for this print Njoy Below is the link with all my designs https://www.printables.com/@SotKon_345789/models
Case for HmIP-PCBS2 actor from HomematicIP with relais board installed. Easy to print, no supports needed. You might need to press the clip for the board in with your finger before it moves freely and you can clip in the PCB. One version…
Any feedback would be greatly appreciated. Nozzle 0.4-1.0mm Layer Height 0.2-0.3mm (Recommended) Infill 15% Add a some small Cylinders as Negative Volume for draining No Supports needed Scale it as you like :)
This mount uses magnets to hold the Voice unit in place. Press the magnets into the 4 posts on the printed model. I recommend using a right-angle USB-C cable to connect your power source. Requires: 4x 4x2mm magnets 4x *ferrous/magnetic*…
Hi! I use a simple IR-Remote to control some of my smart-home devices and automations using home assistant. I built this little IR-Receiver using an ESP32 (CH340) USB-C Board and a KY-022 IR-Receiver. Both very inexpensive components. I…
Any feedback would be greatly appreciated. Nozzle 0.4-1.0mm Layer Height 0.2-0.3mm (Recommended) Infill 25% Add a some small Cylinders as Negative Volume for draining Scale it as you like :)1
I created these Key Tags as a simple way to label keys with text and color-code them as well. I've provided 206 3MF and 206 MK4 g-code files with pre-defined text to get you going straight away! Choose from automobile makes and models,…
With this box you can install Home Assistant Glow on an esp-01s board powering everything directly from main power of your house. From original setup of the Glow I removed the status led because I don't need it, but it can be readded…
Any feedback would be greatly appreciated . Nozzle: 0.4mm Layer: 0.16-0.2mm (Recommended) Supports needed (Paint-On Supports, Tree support) No Brim needed
I whipped up this mount to hold a Google Home Mini vertically on an Elfa Utility Board. It's similar to other designs I observed with the exception of the specific hangars needed for the Elfa product. The model I used to create this was a…
for english description see below. Deutsch 19 Zoll Gehäuse für ELV Charly. Was ist ELV Charly? ELV Charly ist ein Raspberry Pi (3B) kombiniert mit einem Homematic Funk-Modul RPI-RF-MOD (die selbe Hardware wie in einer Homematic CCU3). ELV…
This adaptor or insert is meant to be used with Home Depot's Halloween Rotten Pumpkin Patch collection. The adaptor will allow you to swap out the internal components for an addressable led puck light ( similar to this ). Now you can make…
Commonly failing plastic components in motorhome window blinds can be a persistent issue. This repair kit provides a durable, 3D printable solution to replace worn or broken parts, restoring full functionality to your blind system.…
Use the HI-LINK LD2410 motion and presence sensor with Wemos D1 min in esphome. I can also use it to measure light, moving distance, still distance, moving energy, still energy, detection distance, and more with home automation. Use PET…
I use the HC-SR04 sensor to measure the distance of a person approaching to turn on or off the light with Home Assistant automation. I use the D1 Mini board.
After placing my Home Depot lighted candy canes into the ground in the front yard, two of the stakes promptly snapped off. I created this model to replace those stakes with a more robust design. Hope that it helps someone out!
Any feedback would be greatly appreciated . Nozzle: 0.4mm Layer: 0.08-0.24mm (Recommended) Supports needed (Paint-On Supports, Tree support) Brim needed Scale it as you like :)
NEW: Homing bump variant is now available! This model is made to fit into the standard key switches that come with the Voyager. It is definitely not as high quality as the ZSA caps. This will not allow light through it unless you print it…
Any feedback would be greatly appreciated. Nozzle 0.4-1.0mm Layer Height 0.2-0.3mm (Recommended) Infill 25% Add a some small Cylinders as Negative Volume for draining Scale it as you like :)
The Blue Boy 3d Plaque : Painting by Thomas Gainsborough "The Blue Boy," an iconic oil painting by English artist Thomas Gainsborough (1727–1788), is a prominent masterpiece housed at The Huntington Library, Art Museum, and Botanical…
Replacement in case you break the tab off like I did Designed for: https://shop.homeseer.com/products/z-wave-door-window-sensor HomeSeer HS-DS100+ Z-Wave Door / Window Sensor
Cover/case for the Home Assistant ZWA-2 z-wave antenna if you need another color to better fit your home. There are single color versions for different printer sizes and one version if you want to have a multi color antenna. Recommended…
This cover allows you to install a Bosch Smart Home Radiator Thermostat II within an Oventrop UniBox, enabling control of your underfloor heating circuit. Important: Please note that the peg spacing and dimensions from the original design…
Building my own homelab and just purchased the rack rails to 3d print my own components - Created these side braces to make a rack that is a little over 250mm deep to sit on my desk. I've fastened these to the rails with M5 bolts, a small…
House I made with space in the back for some electronics. Needs supports Any Print Quality is fine, but the smaller door and window indents might not show up
This is not an official product! I didn't like how the Google Home had the tendency of moving around on the coffee machine, scratching it up and potentially falling off, especially if you're listening to bass-heavy music over an extended…
This cover allows you to install a Bosch Smart Home Radiator Thermostat II within an Oventrop UniBox, enabling control of your underfloor heating circuit. This is the second version of this model, improved from an earlier model that was…
I made my one printer box with some recycled materials. Printed in 0.2mm layer height, 20% filling with PLA+, without support except for the hinges The side plank have 10 mm of thickness and top/bottom plank have 20 mm of thickness. For…
These are parts used to make a powered Tachometer display box for a small Lathe or Milling machine and mount the connected sensor to a OPTImill BF16 Vario Milling machine via either an Replacement Cap cover part or a bracket. Two…
I found this decent model of homer Simpson but wished it was colored so i colored it my self
Show that you are no quitter in your homegym with this sign that says “Pull Up Not Out”. Mostly made this to get a laugh from my wife when we work out together. It uses 4 10mm x 3mm magnets on the back to attach to your power cage or…
Seeed Studio ESP32C6 + HiLetgo MAX98357 + CQRobot Speaker Case Dimensions: Speaker - https://mans.io/item/cqrobot/cqrlb4o3w-b Amplifier - https://www.adafruit.com/product/3006 ESP32C6 - https://www.espboards.dev/esp32/xiao-esp32c6/ No…
The original model from Thingiverse (see link) didn't fit very well on Thomas & Friends wooden track which is ~12.25mm thick. So I used the .scad from the original to make a slightly taller version (height = 12.75 mm) to work with this…
Gehäuse für einen Batteriebetriebenen Homematic Aktor “Siehe Link” Meine Frau Ihre Deko bekommt so immer ein paar kleinen LED Ketten, mit Einbindung in das Smart Home Die 6 ist für eine leichte Identifizierung.
The Remote Learning Tower allows remote homework with a smartphone and wifi/mobile data. Executive summary: The Remote Learning Tower hold a smartphone that will stream like a videocall the desk area from above. With the loudspeaker…
(French follows) Lenz was the creator of this diode bridge for detecting the presence of trains on the rails. This home made model features both a case and a soldering aid for the 5 1N4001 diodes. The case is designed to be screwed…
Verlängerungs-Beine für die Lidle Truhe (LIVARNO home Sitzbank). Hebt die Truhe 60mm an, damit auch Schuhe drunter passen. Sollte mit möglichst viel Material gedruckt werden ! Werden gesteckt, passen saugend und lassen sich einfach wieder…
Each of the original massaging footrollers of the Homedics FB-400H heated footbath is produced through injection molding in two identical halves. Each half consists of a half roller and a half axle. The small cross-sectional area where a…
Kurzbeschreibung (Summary): Elegante, funktionale Deckenhalterung für den Apple HomePod mini. Hält den Speaker sicher an der Decke oder unter Hängeschränken und versteckt überschüssiges Kabel unsichtbar in der integrierten…
A custom-designed wall mount for the ESPHome 8266 Temp/Humidity/Light Sensor , providing a secure and neat installation. This mount allows easy access to the sensor while keeping it organized and functional in any room. Designed to be…
I recently purchased a bike trailer (also known as fietskar/ Lastenanhänger). Its frame is made of 20 mm diameter metal pipes. (EAN: 4251774961240) I designed this “clamp and insert” buffer attachment to protect the frame paint when I set…
This model is designed to use this monitor from Amazon: https://a.co/d/0rkTGwB And this cold shoe adapter: https://a.co/d/13R9GcO I use this phone tripod mount to hold the phone and to provide the front cold shoe to hold the monitor…
Představuji vám elegantní 3D jmenovku se jménem THOMAS , která je perfektní dekorací do každého interiéru. Tento model kombinuje moderní design s praktickým využitím . Hlavní vlastnosti • Personalizovaný design - jméno THOMAS vytištěné ve…
Matches dimensions of ‘George Home Brownie Tin ( 6131085 )’. Printing parameters Heat-resistant material needed: ASA/ABS, PETG, or better Usage Layer of tin foil would be a good idea, especially if your material of choice isn't food-safe…
-- English Below -- Für den Präsenzmelder von Homematic IP ein 30° Adapter. Dieser hat zur Wand befestigung zwei 5,5mm Löcher und mittig ein 4,1mm Loch. Die Grundplatte kann entweder mit Doppelseitigem Klebeband, oder mit Gewindeeinsätze…
Any feedback would be greatly appreciated . Inspired by the Zara Home rectangular black resin tissue box. Product page here: https://www.zara.com/uk/en/resin-tissue-box-p43524455.html There are cornered and rounded versions. Also 3…
his is a digital 3D printable model of an Anatomically Correct Human Skull based on a scan . This accurate skull replica is a perfect Halloween decoration, or simply a wall decoration/shelf display, cosplay prop, headphone holder… The…
I first posted this on Thingiverse on 1/23/2022. A couple of copies were posted here as original work (without attribution) and were taken down, so I've decided to also post my original design here. Print using 0.4mm line width and no…
“What are Silly Shells?”: Silly Shells are an ecosystem of 3D printed shotgun shells for homemade Nerf-style blasters! There are many, many different shells to use in each blaster, allowing one blaster to fire a wide variety of ammo types…
The pedestal angles the Google Home/Nest Mini (gen1 and gen2). In certain cases this improves on the sound of the speaker while also improving the microphone reception. The connector is routed inside the base and connects with the Mini…
The SLAB: Silly's Lever Action Blaster. A Talon-fed half-dart lever-action springer. Firing demo: General blaster overview video Firing demo video The SLAB is a lever action, Talon mag fed, half dart springer. Sellers A full list of US…
I printed these ducks with no supports, 0% infill, back seams, and 6 bottom layers (so they stay upright while floating). Check out my duck page for all my ducks! www.karenchaudesigns.com/ducks Support my projects Follow me & like this…
Follow us on Patreon & Instagram for the latest models. ❱ Instagram: https://www.instagram.com/sektor7_studios_3d/ ❱ Patreon: https://www.patreon.com/sektor7_studios (commercial license & more beautiful designs) NEW UPDATE: TWO TEALIGHT…
On the Original Prusa XL , adjusting the belt to the optimal tension is crucial to achieving good quality on the prints. Here is a detailed guide .
v3 UPDATE NOTES: This will likely be the final iteration of this project. The biggest change with v3 is that I have optimized the files to allow for the use of threaded heat inserts. Everywhere that screws previously threaded into…