HSW Six ESD tweezers holder
Holder for six tweezers like this: https://www.aliexpress.com/item/1005002899777953.html?spm=a2g0o.productlist.0.0.e8d24
- Downloads
- 2,311
- Likes
- 419
- Rating
- 4.98
4,092 models
Holder for six tweezers like this: https://www.aliexpress.com/item/1005002899777953.html?spm=a2g0o.productlist.0.0.e8d24
UPDATE 14.12.23 Added supportless=true settings in insertAttachToWallEmpty(), which allows printing the model without supports. Description This is updated version of OpenSCAD library for HSW attachments - added metric nuts inserts from…
A mount to store your phone charger on the honeycomb storage wall. Also works with bigger chargers like the OnePlus Warp Charge 65, or with other Euro-Plug devices that are not USB-Chargers. Fits CEE 7/16 Alternative II "Europlug" (Type…
This is a slim, simlpe Player Board for Oathsworn: Into the Deepwood. It keeps cards, cubes, tokens and animus in place. There are two versions: One with slots for tokens and one without. I prefer a clean design without token slots.…
Mount and display your favorite bic lighter on the Honeycomb Storage Wall
UPDATE 04.08.2023: Added print file for PLA, 0.3 mm layer. UPDATE 31.07.2023: Added print file for PETG, 0.3 mm layer. Print time decreased to about 5 hours. UPDATE 25.07.2023: New model printed and seems all is fine, check photos. On…
There are two versions, the longer one (65) may be better for watches with thicker buckles. Material: Prusament - Anthracite Grey Petg Layerheight : 0.2mm IS (Structural) Support: No Seam painting: If you want, inside the model
Hey folks! In my quest to find the perfect way to mount popular drawer organizer for screws, I stumbled upon an idea that turned out to be a game-changer – and I'm thrilled to share it with you all. Introducing my custom-designed…
Created to hold a glue gun and keep the cord out of the way. This fits my Stanley GR20 glue gun, but would probably fit most smaller guns as well. Designed to use M4 x 12 socket head screws with M4 nuts along with the M4 inserts from the…
Purpose built hook for hanging the Irwin VISE-GRIP Wire Stripper from the Honeycomb Wall Storage grid .
Holds a desoldering pump on the honeycomb storage wall.
Holds a standard desoldering pump on the honeycomb storage wall.
shelve for 608-xxx bearings.(22mm diameter) -PETG 4x perimeter
Could not find a suitable holder for my IFIXIT dental tools, so i made one myself. Easy to print and with minimal support waste. Still the tiered design allows for easy access of any tool without knocking of the other ones. My recommended…
Magnetic insert with hidden three 6mm magnets with arbitrary thickness. Magnets should not need to be glued, they should hold by the friction (mine do). Even with “standard” 6x2 neodymium magnets (e.g., usable with Gridfinity) it can hold…
A small holder for the accessories from the ifixit pro tech toolkit. I used this holder for the pliers: https://www.printables.com/de/model/540978-hsw-tweezer-holder I used this holder for the Mako Screwdrivers and cutted the holders on…
Segmented box with spout (front only) and lid for honeycomb storage wall system (HSW). I use this for my filament clips but it's good for any small objects. It needs two “empty-insets” to be fixed to the HSW. The hinge parts are quite…
Made a bottle holder that is 85mm wide for Rostaps HSW with optional add on spraybottle dispenser thingy whatever you wanna call it that about 15mm wide. Print the big holder stadning up wiht support from buildlate only (organic is to…
For the shower, I thought it would be great to tap into the honeycomb storage wall (HSW) system which has a ton of shelving options. This allows you to build your own shower system. I'm just providing a way to anchor it to your shower…
I know you have a drawer full of random cable ties… we all do! Now you can finally sort them with this practical organizer . The best part about it: you can mount it to the famous HSW with two small M3 screws ! Watch this video for more…
This is my design for a Honeycomb Storage Wall compatible rack, especially for Army Painter paints (works just as fine for any other standard dropperbottle). Print settings I used: Layer height: 0,2 mm Shell thickness: 3 perimeters…
As mentioned above don't use the remix as stand alone model but use it to connect already printed parts Thanks to Edwin Eefting @EdwinEefting_24240 Xander @Xander_424401 You can customize…
A simple hook for hanging a protractor on the Honeycomb Storage Wall .
Simple yet useful accessory meant for epic Honeycomb storage wall that can be used for attaching Samsung Galaxy Watch4 charger. It has a fairly simple design and can be printed in about 30 minutes. It is mounted inside empty insert, which…
Allenkey (1.5mm to 10mm) and torxkey (T10 to T50) holder attachement for the HSW. I used galaxy black PLA. Because I wanted a nice print I used some organic support for the brandname “Stier” and 0,2mm only for the first layer. All others…
It's a Honeycomb Storage Wall filament guide. I printed with support only inside the HSW socket, but honestly it could droop inside and affect nothing, so it could be printed with no support at all. I also printed with zero infill, and…
I printed with PETG and organic Support.
I love the Honeycomb Storage Wall by @RostaP enough to now have a 30-panel wall in my workroom - covering 108cm x 111cm (nearly 4 feet x 4 feet)! All of the outer panels have a solid frame thanks to the fabulous Honeycomb storage wall…
Created HSW shelve for 1/4 hexagon tools. Added two variants: v1. with 5 storga holes with bottom. v2. with 10 storage holes. 5 with bottom, 5 without. Printed with PET 2 perimeters and structural 0.2 IS. I think it could be easily…
Wydrukowałem pionowo z podporami
Remix of @forsaken_candy 's multimeter mount for Emos MD-310, or any multimeter that fits dimensions up to 74x32mm(length x width)
Quick and easy print! >> No supports needed << Used to hang 3M safety glasses Mounts with small M3 screw to HSW Watch this video for more informations: https://www.tiktok.com/t/ZGewcvoNb/…
PETG .4 nozzle .2 layers no supports Happy printing - would be awesame if you'd let me know what you think!
Easy-to-print Baseus Simple Wireless Charger mount meant for epic Honeycomb storage wall . I designed this accessory for Baseus Simple Wireless Charger (Updated Version) (exact model: BSWC-P10C ), but it should work for any round wireless…
Designed to fit on the HSW ( Honeycomb Storage Wall by RostaP ). Printer configuration: 3D Printer: Elegoo Neptune 3 Pro Filament: Porima PLA Brown Slicer: UltiMaker Cura Resolution: 0.2mm Infill: 15%, Grid Wall Line Count: 2 Support: No…
Holder for compressed air for cleaning Printing with PLA Nozzle 0.4HF Core ONE 3 layers 0.2 lines Encouragement will please
Hook for the HSW Compact and strong hook that can be printed without support. Easy to Snap to your Honeycomb Storage Wall. 3 Different Sizes. Print orientation: Recommended orientation for printing as the image shows. Print Settings:…
Wire Cutter Holder for the HSW Compact holder that can be printed without support. Easy to Snap to your Honeycomb Storage Wall. 3 Different variations. Cutter Dimension This holder is designed based on the generic wire cutters with the…
Update 17/09/2023 Added “HSW Ez-V1 Round Object Holder - 65mm Left” Update 29/04/2023 Added “Ez-V1” and “Ez-V2" hooks (14 files) which supersedes all other versions. These have been completely remodeled for improved strength, easier bed…
Update 18/09/2023 Added “HSW Single Wall 11x2 SD” & “HSW Single Wall 11x3 SD” Update 30/04/2023 "HSW Single Wall - 11x7 HD" added “HSW Test Wall HD” added All files renamed ---------------- My new Honeycomb Coffee Wall just needs one…
When the Inserts fits tight in the Honeycomb Wall, they are difficult to remove for replacing to another location. I tried with a screwdriver, but the PLA gets deformed. So I designed a removal tool. Stick the tool in the inner hex from…
Remixed a caliper holder by Klave (linked) for the honeycomb storage wall. Hexagon's (connector) faces was offset by -0.15 for snap fit into the blank insert needed for the wall storage. The blank insert can be downloaded at…
This is a shelf and shelf support and for the Honeycomb Storage Wall (HSW). The shelf is a the standard wall-honeycomb-part.stl with side walls added. Please note that some of the honeycombs that may look complete on the shelf supports…
simple insert to fit universal flush cut pliers for filament cutting etc. use with blank insert_hollow from the original HSW board Check out my collection of HSW attachments here :) Printing instructions: no supports use 4 perimeters…
Multi Tool Holder for the HSW Compact tool holder that can be printed without support. Easy to Snap to your Honeycomb Storage Wall. To hold cylindrical tools with diameter from Ø3mm to Ø30mm. Holder Dimension This holder is designed to…
Since the updates are long and filled with images and a lot of people might want to skip this, so I put the updates at the bottom of the description. Summary Collection of different size of the HSW sliding box! The sliding box comes with…
Contents Regular size hex pins: 45mm 65mm 85mm Small size hex pins: 45mm 65mm These pins fit the Honeycomb Storage Wall. I wanted a simple pin-style hook to toss things on, both large for stuff like tape, and a small one to hook packaged…
I've been playing too much Call of Duty lately and decided to make a print in place “quick-reload” paper towel holder. Largest paper towel I've tested is Costco's 6" diameter paper towels. Installation notes: When determining the spacing…
Update 27 April 2023 Test wall piece added - small 7 hex piece --- Honeycomb Storage Wall's wall piece - remixed to max out the usable plate on the Bambu X1/X1C/P1P 252x248 is the biggest possible but requires a bit of tinkering to print…
a basic shelf for the honeycomb wall in various variants. 13,5 x 7 cm 8 x 7 cm 8 x 6 cm 8 x 5 cm Just look for my other useful stuff for the Honeycomb Storage Wall.
There are several different versions. 3 or 5 Pegs With or without front lip With or without print supports needed You can even install these upside down so the on the underside.
Introduction In case you are not familiar with why hexagons are mathematically and scientifically the bestagons, please first familiarise yourself by watching this video: And with that out of the way, here is another unnecessarily…
Do you like the Cable holder ? Then here you have a remix with a few improvements! This remix brings several modifications that improve the original model: Several size options Rounded edges of the model (the original model has sharp…
When I became interested in the honeycomb storage wall, I thought that the hooks that I had designed for the IKEA Skådis board could be used on the honeycomb wall as well, so with some redesigning of the hooks and a customised inserts, I…
Custom honeycomb storage wall sized to fit the build plate of a flashforge adventurer 3
I recently fell in love with the Honeycomb Storage Wall (HSW) but couldn't find a good generic bucket to keep items in. The shelves weren't deep enough and the cups were too deep. The HSW bucket-shelf was exactly what I wanted but…
Plugs for original wall-attaching inserts can be rotated while pushed into the inserts. And I didn't like it at all :) So I designed a version that will always be in the correct position. Designed for ~4 mm diameter countersunk screw.…
Holds a ruler to the HSW solution. I modeled with an -0.15 offset, so no need to size. It's print and play and should (depending on your printer's tolerances) snap into the HSW blank insert that can be found on the original HSW post.…
This space saving battery dispenser for the honeycomb storage wall is designed to hold both AA and AAA batteries, 12 AA and 13 AAA. A hexagonal pattern on the sides of the magazine makes it easy to see how many batteries are left. A…
Someone needed the original container with an adapter for the great HSW , so I added some with my rather limited modelling knowledge ;-) Added models with the HSW attachments in the middle or at the top by request. I have not printed…
Set of 5 different style Shelves for Honeycomb Storage wall. Shelves are 100-120mm wide and 50-60mm deep. Made specially for HSW or Honeycomb Storage wall with Hex wall fixings. Depending on Your printer it is possible that a very little…
I really liked nobodyinperson 's idea.. I didn't like that the notches were visible and decided to make my own remix. CONCEPT The concept is as follows (for those who are seeing this for the first time): The insert is slotted in 6 places…
These are 2-, 4-, 6-, and 8-stack versions of the HSW 211x248 wall panel. Print at 0.28 layer height with 5+ perimeters to avoid infill. There is a one-layer separation between each panel. Import the STEP file to your slicer, split the…
Update 01/05/2023 Added “HSW Ez-V1 Foot Type 3 v1.0” Update 01/05/2023 “HSW Ez-V1 Foot Type-2 v1.0” added for better stability on taller walls and for double-sided walls. -------------- These feet use the Ez-V1 series clip and therefore…
Keep your favorite glue stick and a backup close at hand with this dual glue stick holder for the honeycomb storage wall system. Fits into two empty inserts for the HSW system as well. Fits the 21/22g glue sticks or anything under 27mm…
Tweezer Holder for the HSW Tweezer container, easy to print with 2 models to choose. Can be printed without support. Easy to Snap to your Honeycomb Storage Wall. Tweezer Dimension This holder is designed based on the regular tweezer with…
I have incorporated several ideas into a single model. Remix of the official enclosure risers. Remix of Riser D, took the remix of santa(lemuroff) and added HSW on his model. Check out my spool holder remix as well. I took the idea of…
Spatulas Holders for the HSW Compact and nice-looking holder for small spatula that can be printed without support. Easy to Snap to your Honeycomb Storage Wall. Spatula Dimensions. Here are represented the dimensions of both spatulas that…
A remix of the Large Scissor Holder for Skadis by MattBurt that fits the honeycomb storage wall by RostaP
Storage shelves with walls to allow for more stacking.
This downloadable 3D model is a nitrile glove holder designed specifically for use with the Honeycomb storage wall system by RostaP. Features: Compatibility: Seamlessly integrates with Honeycomb storage wall panels. Material: Designed for…
Update 18/01/2025: Fixed an issue with the top right corner where it was slightly wider than others ("piece 3"). it took 1000 downloads on Printables and 7000 downloads on MW and one year for someone to mention this! Perimeter wall pieces…
I created a USB, SD card and Micro SD card storage holder for my Honeycomb storge wall. I recently made a version 2 of the stl file. I made a couple of changes to the SD card opening so the cards would fit better. I also made the depth of…
I wanted to put my DM830D multimeter on my honeycomb storage wall, so i made this part. Sharing it in case someone has the same need…
I created the stacked version of the HSW for print with less downtime. The total print length is 9,5h on Bambulab X1E with AMS on normal speed settings. DON'T change the settings. Use Support for PLA filament or water soluble filament for…
A Utility Knife/Cutter holder for the HSW Utility knife holder that can be printed without support. Easy to Snap to your Honeycomb Storage Wall. 4 Types of Utility Knife. Utility Knife Dimension (Width x Thick) mm A: Small (20 x 10) B:…
Trimmed version of Gdschaf border to fit the Honeycomb storage wall 211 x 248 panel, which is about the largest panel you can print on a Bambu Labs printer.
Changelog Honeycomb Wall Compliant Mechanism Clip Mount 2023-01-08 v1.2 Horizontal variant added 2022-12-11 v1.1 changed geometry and printing orientation for easy support removal and more reliable fit 2022-12-09 v1.0 initial public…
I needed a hot glue gun holder for the honeycomb storage wall that I printed.
Doesn't require supports. I printed mine in PLA, but most filaments should work. I wasn't able to find a bin that I liked, so I designed my own. The bins are designed to line up with < 1mm in between to maximize the available space. As…
Hold your AFA deburring tool on your honeycomb storage wall…and do it in style! The space for spare cutters gives it a very Game of Thrones feel to it. Print Settings: Layer Height: 0.28mm (or less) Filament: PLA Infill: 15% This is part…
Prints as shown in the pictures, no support needed.
A simple box for some added storage on your Honeycomb Storage Wall. Walls and base are all hard-modeled with the honeycombs, so no need to tweak print settings to get the honeycomb right. I printed with 4 perimeters to add some strength…
Made this a bit thicker to hold the weight of a full-sized drill with a battery. I have a Dewalt, but this should fit most standard-sized drills and impact drivers.
This is my first printinplace model for the Honeycomb Wall. I want a drillholder that is tilts forward so that I can see and grip the drills better. The drillholder is for drills from 1mm - 13mm with steps of 0.5mm. On top is a labeling…
A long and simple hook, for some tapes or what ever you want.
use with blank insert_hollow from the original HSW board Check out my collection of HSW attachments here :) Printing instructions: no supports → print upright use 4 perimeters layer height pictured is 0,2mm PETG recommended Version…
This three segment storage bin was inspired by the “Pen, Pencil, Markers, Stuff Holder for Honeycomb Storage Wall” by K2_Kevin. I liked his design, but was looking for something that would hold everything vertical instead of at an angle.…
These are some minimalistic hooks to use on the honeycomb storage wall. I designed 4 different variants with different thickness and length. You can use the empty insert to attach them to the wall. Please check out my other hooks for your…
A remix of the 6 tweezers version if you have 9 tweezers to store
Update 20230314: Working on another variant that sits better. Will leave this up for those that want. New variant at https://www.printables.com/model/423896-honeycomb-paint-holder Since i find…
I couldn't find any easy-to-print pilers holder, so I designed it myself. This model attaches to the HSW using hexagonal tabs. These tabs then fit very tightly (making them hold as one piece) into the standard HSW inserts. Printing…
Fits into the bottom and top of the “wall-honeycomb-part.stl”. I have mine held together using the tri-hollow inserts where the borders connect, and then a dual-hollow insert on the ends. I may end up modifying the pieces into a left and…
Here are a number of bins for small parts for the honeycomb storage wall. The collection of bins are available in widths ranging from 40 mm to 200 mm and with bottom depths of 40 mm or 50 mm. Some of the bins have dividers to get multiple…
Wanted a cable clip for the hsw that is as primitive as possible. There are three variants with different guide types.
8 sizes of display shelves for your Honeycomb Storage Wall. The clip mechanism is fairly tight, I do not suggest you use high stiffness filaments such as ABS-GF, and for the bigger shelves, it's probably not a good idea to use low…
This model holds the basic isopropyl alcohol bottle you get from stores like Walmart and attaches to the Honeycomb Storage Wall. I printed it with the Ender 3 v2 and used Cura as the slicer. With the honeycomb/hex container, it printed…