Search results: idler

Sort order

593 models

P
PrintablesTerence

MMU2S Idler Tension Screw Retainer & Thumbscrew

A solution to eliminate the hide and seek game every time the MMU2S door is flipped. No disassembly or extra components required, reuse existing tension screws and springs, I printed the bases separately in a darker colour and I can…

Downloads
1,219
Likes
228
Rating
4.74
P
PrintablesKarkovski

Prusa MMU2 Reinforced Idler

This is a reverse engineered Prusa MMU2 idler with a few changes. As I've cracked 2 of the original ones and had some issues with idler bearings being a little too loose, I've drawn this in Fusion basing on original. Fit and size are the…

Downloads
842
Likes
87
Rating
4.86
P
PrintablesLV3D

MK3 / MK3S / MK3S+ X idler with tensioner

Do you like stock design and don't like stock tensioner? Here is solution. Parts: -Stock idler sourced from Prusa Research -Compatible shaft is Ø2.9-2.99mm, 15-16mm in length. -2x M3 nylon hex nut -2x M3x18 Socket head screew Print…

Downloads
769
Likes
102
Rating
4.91
P
PrintablesEmpty Shape

MK3S/MMU2S Modified extruder-idler-mmu2s1 - Solves IR Filament Sensor Issues_by Sneaks

I modified on (MK3S/MMU2S Modified extruder-idler-mmu2s1 - Solves IR Filament Sensor Issues_by Sneaks) to make the arm sensor longer, and it worked fine when I test it. Give it try !

Downloads
135
Likes
9
Rating
0
P
Printablesfhartmann

Extruder Idler MMU2S Adjustable With Screw Adj. Housing with Power LED and State LED and MMU2s Filament Sensor

Preview: At the moment I am working on a version that lights up a bit brighter. As soon I got the values I`ll post it. Description: It is a combination of several Persons and remixed for my need: Used 3mm Green and Yellow LED with 2mAmps…

Downloads
61
Likes
20
Rating
5
P
Printablesbkerler

Remix: MMU3 UltiMulti Idler Body with outer metal pin thread fixation

This adds a thread to the Idler Body as one of the other metal pin kept moving to the outer side, blocking the mmu3 sometimes. Recommended Print settings: 0.20mm Structural, 0.4mm nozzle size Organic support on build plate only Use a M3…

Downloads
51
Likes
17
Rating
0
P
Printablesjay2jay99

Fixed MMU3 Idler Body and Pulley Body Without those squares

I could print all the MMU3 parts without issue but the Idler and Pulley body would fail every time as it printed those levitating squares. Some say they're to help the part remove from the sheet but if I go to the parts once the bed has…

Downloads
48
Likes
3
Rating
0
P
PrintablesErgoboy217

MMU3 Idler Tension Knobs

Changing the filaments on an MMU3 can be a real pain, especially if try to do it with the Idler Body closed. When the filament is fed into the MMU3 Pulley Body, it may not align with the pulleys, and the Idler Body bearings may not…

Downloads
44
Likes
17
Rating
0
P
PrintablesUko

Nextruder Modified Idler Lever

For more detailed info, watch the YouTube video: The modified nut may not be needed. The modified lever is a drop-in replacement that shouldn't cause any issues but may resolve issues with poor grip on the filament.

Downloads
2,151
Likes
427
Rating
4.97
P
PrintablesKentO

MK4S Bogie Idler & Main Plate

Updates 25-10-22 “Idler_6-7_R3” dimensions adapted to the Main Plate R4 with angled Swivel. This update is more angled than the previous design to align the screws horizontally and minimize the screw tread friction in the heatsink.…

Downloads
1,849
Likes
547
Rating
4.89
P
PrintablesRadiotbo

SBFI (Smooth Beefy Front Idlers)

Firt of all Check out the github repository https://github.com/Radiotbo3d/SBFI What is this? These are replacement front idlers for Vorons (and Voron-based machines). This design is available for Voron Trident and Voron 2.4. Improvements?…

Downloads
1,099
Likes
183
Rating
4.93
P
PrintablesMichele Bordoni

Prusa stronger MMU2S Idler

During the assembly of MMU2S I cracked the part. I suddenly discovered that many people are having my problem so I updated the Prusa part to get it stronger. This design is based on R1 prusa part. Print instructions I have printed it with…

Downloads
1,088
Likes
68
Rating
4.94

MMU2S MK3S Extruder Idler with bolt

After assembling my MMU2S and upgrading to the MK3S I had a lot of problems getting the filament to load. The issue was the triggering IR sensor in the extruder head. Following the instructions I did a very small trim of the idler arm,…

Downloads
1,026
Likes
53
Rating
3.8
P
PrintablesPaKr82

Extruder Idler MMU2S Adjustable With Screw

I had many issues/errors/problems with my mk3s+ mmu2s while printing multi color. I can tighten idler screew to not have stopped filament, but than I had issues to work IR sensor right. I loose scree, IR sesor was working right, but…

Downloads
922
Likes
139
Rating
4.83
P
PrintablesLone Wave

Elegoo Neptune 3 Pro Belt Tensioner for Toothed Idler - Includes OEM part models

** Updated 10/18/26 to add OEM Y-Axis tensioner housing model in Stock Parts ** I did not like the stretchy generic GT2 belts that came with the Neptune 3 Pro, so I set out to replace them with genuine Gates GT2 belts. Since I was going…

Downloads
908
Likes
103
Rating
5
P
Printablesdcook

Ender 3 Extruder Tensioner Idler Bearing Lever Arm

My tension lever cracked on my Ender 3, leading to under extrusion problems. This is a replacement part that I designed to not require any changes. The bearing screw hole is slightly undersized to allow the screw to thread into the…

Downloads
858
Likes
40
Rating
4.56
P
PrintablesA3B

Prusa MMU2S thumbscrews for idler tensioning

This is a remix of the MMU2 thumbscrews for the MMU2 S . The longer thumbscrew should avoid accidentially pushing buttons on the MMU2S. If you already printed the short/original, you just have to replace the left thumbscrew, because there…

Downloads
841
Likes
130
Rating
4.97
P
PrintablesMorten Arntun

Anycubic Kobra 2 Pro Z-belt idler

The model is parametric and customizable depending on what bearing you can get a hold of and what tolerances your printer has (press fit). Hardware required: 2x ≥M4x20mm screws 1x M6x30mm screw (depending of the ID of your bearing) 1x M6…

Downloads
835
Likes
117
Rating
5
P
PrintablesAKinferno

Voron 0.2 - LazyCams - Tool Free Locking Idlers (for Top hat))

Thank you to the Voron Design team for all the hard work and amazing printers. Feedback on this mod is appreciated! I think this is a “must have” mod for the V0. Model C is the current LazyCam, but models A and B are here as well. I can't…

Downloads
695
Likes
230
Rating
5
P
PrintablesLivius

MK3S+ Extruder Idler Upgrade

This version of the idler was inspired by @MihaiDesigns_9605 work to root cause inconsistent extrusion as outlined in his investigation found here . I've been printing with this idler for a few months on my two MK3S+'s and have noticed an…

Downloads
580
Likes
115
Rating
4.89
P
Printablesjurassic73

Ultimulti - Idler Remix - no rattle/quiet

Remixed the R17 Ultimulti version of the idler to remove rattling sound when idler moves. Remix of the original Prusa standard idler version here . Print as oriented. This remix adds a .5mm bearing spacer to each wall of the bearing slots…

Downloads
505
Likes
97
Rating
5
P
PrintablesStevelucky

Prusa i3 MK3S MMU2S Bear Extruder-Idler-Lucky Mod

I'm definitely standing on the shoulders of giants with this one. I have the Prusa i3 Mk3s with the MMU2S. I have not been able to reliably print anything yet without issues. I've narrowed it down to what I consider to be, by far, the…

Downloads
479
Likes
51
Rating
4.5
P
PrintablesMartin_au

Prusa MMU2 thumbscrews for idler tensioning.

My MMU is in a pretty tight location and I can't easily get an allen key in there to adjust the idler tension. Here is a design for some thumbscrews that can be pushed onto 40mm M3 screws to adjust the tension without an allen key. They…

Downloads
463
Likes
36
Rating
5
P
PrintablesAurel-14-FR

Voron 2.4 - Front Idlers Tensioner - Mod - Remix

NEW VERSION THE 2024 / 22 / 12 ! REMIX OF THE FRONT IDLER TENSIONER FOR VORON 2.4 This is my remix of the front idler tensioner mod from Ramalama2 https://github.com/Ramalama2/Voron-2-Mods/tree/main/Front_Idlers In my opinion, the body…

Downloads
456
Likes
91
Rating
5
P
Printablesjurassic73

Rattle-free/quiet Prusa MMU3 Idler

Remixed the standard R4 version of the idler to remove rattling sound when idler moves. Remix of the Ultimulti version here: https://www.printables.com/model/893656/ Print as oriented. This remix adds a .5mm bearing spacer to each wall of…

Downloads
437
Likes
148
Rating
5
P
Printablesirukard

GT2 6mm Belt Idler Pulley Mount for V-Slot 2020/2040

GT2 belt idler pulley mount for V-Slot aluminum extrusion profile. Print with no supports. Easy to mount and service. Ideal for belt driven v-slot carriage. Focused on providing the longest possible travel distance. Back side of the belt…

Downloads
430
Likes
38
Rating
5
P
PrintablesBing

Voron 2.4 Tool Free Z Idlers Using Pin Mod

I was having a hell of a time tightening my z idlers on my Voron 2.4 and decided to go for Chaoticlab's tool free version but I didn't like how he used a square nut (not common or used anywhere else) or hex nut (also not used/common for a…

Downloads
423
Likes
89
Rating
4
P
PrintablesKaaaaaaaaaaaaal

XL Nextruder Main Plate and Idler Lever - (For Flex Filament)

I was having a lot of trouble printing with flexible materials like Ninja Flex on my XL so I decided to modify the existing parts to try and eliminate the filament jams. Initially i started with reducing the friction from the filament…

Downloads
401
Likes
79
Rating
4.25

*IAF Idler 1.1+* for PRUSA Nextruder with MMU **Unleash the full potential of the PRUSA Nextruder PG-Pulley**

Non-MMU IAF-Idler Version now available here Updates: 17.01.2026: added modified CORE ONE Loveboard mount with more spacing for screwnut movement 26.11.2025: Note: It could be possible that you need to tighten the Idler screws after the…

Downloads
399
Likes
132
Rating
4.75
P
Printablesjfromel

MMU2s Idler improved mounting for motor.

The 4th installment of my MMU2s overhaul As discussed on the forums and here, the stock idler is prone to breaking if the set screws are too tight on the D shaft. In addition to the potential breakage when installing all the force of the…

Downloads
380
Likes
44
Rating
5
P
Printablesminilogique

WWBMG WristWatch extruder for IDGA with Sherpa Mini mount and hotrod smooth idler

Had an OEM IDGA gearset laying around and I had nothing else to do with it. Clockwork2 seemed to be unecessarily complex so I opted to butcher WristWatch2 BMG version to make it fit IDGA as it's already fairly similar. Just needed to move…

Downloads
373
Likes
88
Rating
5
P
Printablesclogged_nozzl3

Centauri Carbon runice toothed idler blocks

New improved version out now! What do these blocks do? They allow the use of toothed idlers that will drastically reduce belt pitch vfa Can reduce rattling noise on fast accelerations (seems to depend on material used for printing) Easy…

Downloads
363
Likes
153
Rating
5
P
PrintablesBruce B

Improved MMU3 idler (updated)

I love my MMU3, but too often when loading the filament to the MMU it misses the output tube and sticks out between the idler and selector (see picture). This mod adds raised ridges to the idler ensuring filament remains on the right path…

Downloads
361
Likes
154
Rating
4.63

Kreidler Florett RS Scale 1:8 Designer Ed van der Heijden.

Kreidler Florett RS K 54/504 N Supports: Yes Resolution: Dynamic Infill: 20% line Filament brand: 195 - 210 Filament material: PLA

Downloads
355
Likes
40
Rating
5
P
PrintablesDunil

Idler-body for MMU2S with some extra features

Features: Open/close Idler-unit without tools Idler-body locks with Snap-locks Original screw, spring, spring movement etc. Easy to exchange with original Idler-body Filament sample holders, and number imprints Easy assembly/disassembly…

Downloads
353
Likes
105
Rating
4.82
P
Printableskbu

2GT Pulley and idler

Without bearing, should rotate freely on a M5 Screw.

Downloads
348
Likes
21
Rating
0
P
PrintablesJiří

MMU2S Idler Tension Screw Retainer & Thumbscrew two parts

A solution to eliminate the hide and seek game every time the MMU2S door is flipped. No disassembly or extra components required, reuse existing tension screws and springs, I printed the bases separately in a darker colour and I can…

Downloads
338
Likes
47
Rating
4.9
P
Printablesslvkmkr

Prusa Mini X axis end idler

Remix of great design of Prusa MINI X End by Alsteiner. Separate 2 functions of x axis end (fix + idler). I made it more robust, symetrical, improved tolerances and its made for threaded inserts 5pcs (M3: 5,7mm lenght x 4,6mm wide - or…

Downloads
331
Likes
64
Rating
4.71
P
PrintablesMichael Doe

Idlers tire logo template

Tested and printed without issues using Cura slicer.

Downloads
324
Likes
9
Rating
0
P
PrintablesScottW

MK4 Camera Mount - X_idler Clip-on

I designed this as an alternative to @ebeeche's excellent x-axis mount, as I was having some x-axis collisions with V1 of his mount. Rather than using the top surface and radius of the x-idler, I took a different approach using the…

Downloads
321
Likes
55
Rating
5

Nextruder & MMU MULTI-MATERIAL GAMECHANGER IAF-Idler

ULTIMATE GAMECHANGER FOR MULTIMATERIAL PRINTING!! After initial install and adjustment, the idler tension is now suitable to works with a extended range of filaments without any idler adjustment! Easy to print, 0.4mm nozzle, 0.15mm layer,…

Downloads
306
Likes
102
Rating
5
P
Printableshuskyte

Prusa MK3S MMU2S Extruder Idler door (debris opening)

A small change to the original or remixed design. The lower part was cut away. This part is of no need at all to the functionality. Reasoning: A perfectly well running MMU2s still needs service. One of those services concentrates on…

Downloads
302
Likes
20
Rating
5
P
PrintablesIPIND 3D

MK4S / XL / CORE One Bogie Idler with more pivot

Minor change following a suggestion from @Ckobar to increase the holes for the roller pins to 5mm to allow more pivot of the bogie. Be sure to print the main plate for the MK4 from here:…

Downloads
297
Likes
43
Rating
5
P
PrintablesAndy Miller

Switchwire Conversion Upper Idlers

I modified the original version to provide some more support as i converted a CR10 V3 and wanted the extra support for the extended belt runs.

Downloads
292
Likes
66
Rating
5
P
PrintablesDoModel

GT2 40T Toothed Idlers

Couldn't find any 40t toothed idlers, and the other models I found didn't seem to have a good grip on the belt so I made these. The 4mm bore ones are made to fit 2x F624ZZ Flanged Ball Bearing. The 8mm bore ones are made to fit 2x F688ZZ…

Downloads
289
Likes
33
Rating
5
P
PrintablesSubtle3D

XL Nextruder Super Constrained Main Plate/Idler Lever

This is a remix of Kaaaaaaaaaaaaal's remix to the XL's main plate and idler lever. 60A Shore hardness filament is basically like trying to push a rubber band through the print head, yuk. It will go into any open gap so this design is…

Downloads
286
Likes
41
Rating
5
P
Printablesnhchiu

Voron M4 with PC4-01 Bowden Connectors and Dual-color Guidler

Voron M4 with PC4-01 Bowden Connectors This is a remix of the beautifully designed Voron M4 extruder. Since the bowden collet in the original design is a little bit hard to source, I've adjusted the size of the hole to fit a more common…

Downloads
277
Likes
54
Rating
5
P
Printableswavexx

Prusa MK3 Bear Full upgrade Y idler + tensioner

Rework of the original Y idler by gregsaun of the MK3 Bear full upgrade to include a belt tensioning mechanism. For a version using a toothed 20T 5ID Gates idler, look at this remix . Print instructions This is compatible with the Bear…

Downloads
275
Likes
33
Rating
0
P
PrintablesChar

Top Adjustable Voron Beefy Z Idlers

I switched to BFI and BZI from Clee on my Voron V2.4 and like them a lot. I only had one issue, everything related to adjusting the Z Idlers. Getting to and adjusting the the downward facing BHCS were a hassle, especially the screw…

Downloads
272
Likes
46
Rating
5
P
PrintablesKyleTW

MK4 Improved Y Axis Idler Mount - Helps Reduce Vertical Artifacts on Y Axis

A quick modification I made to the stock idler mount for the Y axis that helps keep the idler perfectly horizontal and aligned to the belt by using two alignment tabs on the top on bottom of the part. These take up the slack that can…

Downloads
271
Likes
45
Rating
5
P
PrintablesPAC

BFI Double helical Gear Mod (Beefy Front Idler)

Double Helical Gear Mod on BFI (Beefy Front Idler) It has been modified based on Diyshift's BFI Gears user mode I made it to deliver better torque and prevent it from being twisted than normal gear The single-helical gear was found to…

Downloads
261
Likes
86
Rating
5
P
PrintablesDave3dDesign

Prusa i3 MK3s MMU2s Extruder Idler +0.4mm

A new Extruder Idler for the MMU2s Extruder wich helps the ir-sensor detect flexible Filaments better

Downloads
260
Likes
12
Rating
4.67
P
PrintablesJorge BdM

Titan Extruder Idler Lever Artillery X1 sidewinder

I found myself in the circumstance of designing this piece with priority, since it stopped a mass production. Design based on the damaged original part with some improvements for its correct operation. The design adjusts to the pressure,…

Downloads
253
Likes
26
Rating
5

Prusa Bear Axis - X End Idler Tensioner - SquareNut

Modification to allow for square nuts on the Bear X Axis Idler. Prusa Bear Printer Design by gregsaun https://github.com/gregsaun/prusa_i3_bear_upgrade

Downloads
246
Likes
33
Rating
4.83
P
PrintablesChrizz

Spool Idler - FormFutura Standard Cardboard Spool

RC-1.5 - 26 Januari 2021 Did some minor tweaks to the model, no need to trash the previous one if printed. RC-1 - 14 November 2020 Do you use FormFutura's, DSM or Mitsubishi Filaments? You know these are all on cardboard spools with a…

Downloads
243
Likes
42
Rating
4.82
P
Printablesjfromel

MMU2s Idler Body - For the new base

This is the 3rd installment of my major MMU2s upgrade. The idler body did not need much work, unless you ever wanted to use that part again after removing the idler. I had to break mine to get the idler out. Goals: Make the idler easier…

Downloads
243
Likes
12
Rating
5
P
PrintablesKocicak

XL nextruder main plate for bogie idler

FOR USE WITH KentO's BOGIE IDLER ONLY! Big thanks to him, because his main plate and idler solved all my FLEX filament issues on Prusa MK4S. Hi, this is modified one part of main plate for Prusa XL. It is part of KentO's model placed on…

Downloads
237
Likes
27
Rating
5
P
PrintablesKen Mills

Ender 7 Toothed Idler Pulley

This replaces the smooth pulleys where the belt teeth instead of the smooth back run against them. Motion is smoother and quieter than before with these. I couldn't find a commercial with the right dimensions, so I made my own. I printed…

Downloads
230
Likes
22
Rating
5
P
PrintablesBrian

Anycubic Kobra ACE Idler Gear Replacement

AnyCubic K3 Combo Idler Gear Replacement Guide A few weeks ago, I ordered two AnyCubic K3 Combos. Unfortunately, both arrived with broken gears in the idler mechanism. The issue presented as excessive clicking and popping noises when the…

Downloads
229
Likes
40
Rating
5
P
PrintablesStanley

GT2 Pulley / Idler 16x12 Bearing 623ZZ

GT2 Pulley with 2 x 623ZZ bearings. Print instructions Unassociated tags: Rebel II Category: DIY Summary GT2 Pulley with 2 x 623ZZ bearings. Print Settings Rafts: No Supports: No Resolution: 0.1mm Infill: 80% Notes: nozzle: 0.4mm layer…

Downloads
227
Likes
22
Rating
5
P
PrintablesMAQUINA

Prusa Mini Style Y-Axis Idler for Prusa MK3s/+

This is the remeshed Prusa Mini Style y-axis belt idler for Prusa MK3s/+. This would allowed you to adjust the Y-Belt tension without flipping the printers and without hassle. The only thing you have to change is the screw for LCD…

Downloads
227
Likes
50
Rating
5
P
PrintablesChip

Prusa MK3 Y axis Adjustable Belt Tensioner for E3D idler

The same as hprotzek's design but with cutout and washer to keep the base from pressing into the sides of the idler. For 5mm bore 2gt 20th tooth idler from E3D. The tensioner was designed for the mk3 so you will need the mk3 belt mounter.…

Downloads
224
Likes
49
Rating
5
P
PrintablesRESTLESS DESIGN

Prusa i3 MK3(S/S+) Y-Belt Idler

This is my take on the Prusa i3 MK3(S/S+) Y-belt idler mount. The walls/sides are slightly thicker, the mounting holes for the nuts and bolts are thicker, there's a hexagon pattern on the sides, and all edges have been rounded. Mounting…

Downloads
218
Likes
32
Rating
5
P
PrintablesIbot_3D

ProtoXtruder 2.0 Long Idler

I really like the ProtoXtruder 2.0. Unfortenatly there is only a short idler arm which does not allow manual filament changes. Since I implemented cold filament changes in my macros, this is really important for me. So I just created this…

Downloads
210
Likes
19
Rating
5
P
PrintablesTickTock

Reinforced MMU2S Extruder Idler

update: This part was changed in February 2021 to increase the arm length. If you have that newer variant, you should print the 2021 version. The shaft that comes with the idler gear is about 2.3mm too short (see cover photo - shaft is…

Downloads
210
Likes
23
Rating
0
P
PrintablesMartin_au

Opening idler door for the Prusa Mk3s & MMU2s

Tested now. Seems to work well. :D At some stage I'll tweak it a bit more to thicken up some of the walls. The MMU idler door for the MMU2s is a nuisance to open, as the lever used to activate the sensor interacts with the extruder body.…

Downloads
209
Likes
26
Rating
4.5
P
PrintablesCNC Kitchen

CETUS MK3: New idler for improved extruder gear

UPDATE 09.10.2021: Added V2 of the idler with a tensioning mechanism. Uses an M3x40 screw and a suitable spring. This replaces the old idler on the extruder and make space for a standard 11mm extruder gear found on many bowden style 3D…

Downloads
204
Likes
19
Rating
0
P
PrintablesHolzerMax

Prusa MK4 belt tensioner remix - tighter fit for idler

I like Meister Edels belt tensioner for the MK4, but I do think that it has too much play. This remix fits the standard 20*3 mm idler shaft and the original idler, with less play for the idler wheel. For assembly indstruction etc please…

Downloads
197
Likes
39
Rating
5
P
PrintablesUnconquered

ORIGINAL PRUSA MK3S Idler Door Remix - extruder clicking fix - under extrusion fix

I was having the infamous clicking/idler gear slip issue due to the idler axle slowly sliding out of the axle supports. This would then cause under-extrusion and, of course, failed prints. This remix removes the wholes from the axle…

Downloads
186
Likes
27
Rating
5
P
PrintablesBlue

Prusa Core One XY Carriage Toothed Idler

In an attempt to reduce print artifacts, I'm wanted to try using a toothed idler with the Core One. I remixed the XY carriage to be able to accommodate the toothed idler which has a slightly thicker width This takes 2x Gates 2GT toothed…

Downloads
185
Likes
95
Rating
5
P
Printableswaintdeir

KLP1-Bone | Belt Idler Parallel Fix

When I got my KLP1 there were some problems by design. One Problem was the lower belt on the right rear side. The idler pulley is mounted too far to the left, resulting in a non-parallel belt path, resulting in different belt tension…

Downloads
184
Likes
28
Rating
5
P
PrintablesSDeath

Prusa i3 MK3S MMU2S Bear Extruder-Idler-Lucky Mod Longer arm

The idler arm, just wasn't long enough to reach the IR sensor. So I made the arm 0.5mm longer, and that was enough. Print instructions Rafts: No Supports: No Resolution: 0.20 Infill: 20% Filament brand: 123-3D.nl Filament color: Black…

Downloads
180
Likes
20
Rating
5
P
Printablesed

Prusa MK3 Y-Axis Belt Tensioner for Gates 20T Idler with 5mm Bore

Y-Axis belt tensioner for Prusa MK3. This is for a 20T Gates Idler with a 5mm bore. It's loosely based on MattyVee's excellent design, https://www.thingiverse.com/thing:2786671 . Items you'll need for this: (1) Gates 20T idler with a 5mm…

Downloads
180
Likes
17
Rating
5
P
Printables3DP-MAMSIH

MMU2s Idler 20 teeth Pulley Fit GT2-6mm

HI! print this idler / selector with different material, but it's a waste every time; so i came with this simple design combine the 20t 6mm gt pulley with the tensioner to make it more solid, hope it can make the process less complicated…

Downloads
175
Likes
37
Rating
5
P
PrintablesSixpack99

GT2 Idler Pulley using 608 bearing

Contains a top and a bottom half that snap together with the 608 bearing in the middle. Outer diameter is 27mm. Inside diameter is M3 (technically 3.5mm to allow for tolerance). Print with PTEG or PLA using 0.2 layer height and 0.5 or…

Downloads
172
Likes
16
Rating
5
P
PrintablesProwlerON

ProtoXtruder Extended Idler

The original idler arm is good, but I had gotten used to having an arm I can pull back to help feed. Was able to use the supplied step file and modify it within Fusion 360. Some cut and paste, and the part was extended 15mm. This was…

Downloads
169
Likes
21
Rating
4.67
P
PrintablesMartin_au

X5SA Pro pulley supports for toothed idlers

X5SA Pro pulley supports for toothed idlers. Includes support at the top of each bolt so that the idlers can run freely. It is designed to work with idlers ~8.6mm across. Print 2 x 2.6mm spacers and 4 x 1.6mm spacers. Print a normal and…

Downloads
160
Likes
19
Rating
4.67
P
Printablesbigred9900

Prusa MK3S MMU2S Extruder Idler + Filament Sensor Sensitivity Increase

This is the exact Prusa i3 MK3S MMU2S extruder idler with one layer added to the part at the top that breaks the filament sensor beam. I modified this piece because I was attempting to pair PETG and a Flex filament. I found that the Flex…

Downloads
158
Likes
2
Rating
3
P
PrintablesDingo

XL Nextruder Main Plate for Bogie Idler with Load Cell Protection

This modified main plate for the Prusa XL is based on the excellent work done by @KentO_105090, @KocourMour_2487045, and @Ro3Deee and combines features from the bogie idler main plate with a load cell protection wall. Looking for MK4(S)…

Downloads
157
Likes
24
Rating
5
P
PrintablesAaron F

Voron Legacy Blind Joint Front Idlers

Front Idlers for a Voron Legacy that uses blind joints instead of the corner cubes. No dimensions have changed for position or linear rod length. Original files found here: https://github.com/VoronDesign/Voron-Legacy

Downloads
153
Likes
25
Rating
5
P
Printablesheron

Prusa i3 MK3 Clone x-end-motor and x-iend-idler for brass nut

The original MK3/S uses POM nuts on the leadscrews. This design works with the more common 22 mm brass nuts.

Downloads
152
Likes
7
Rating
5
P
PrintablesJakob

MK2 - MK2.5S Y-Axis Belt tensioner idler pulley- no threaded rod disassembly!

Only open one nut and push the original idler aside to make space for the new one.

Downloads
152
Likes
19
Rating
5
P
Printablesitsjsf

Voron Stealthburner CW2 Closed Guilder Arm BMG Idler Pin Holes

I frequently has issues with the BMG idler popping out of the guilder arm in the CW2 extruder. This issue seems to happen to others as well, see for example this message in the Voron discord. To hopefully fix this issue I remixed the…

Downloads
151
Likes
20
Rating
5
P
Printableshartk1213

Voron V2 and Trident Live Idler XY Joints

M3 heatsets 4 M3x35 SHCS 4 5x30 Shaft 4 M5x1 Shim 10 M5x0.5 Shim 6 MR115 Bearings 4 F695 Bearings (should have these on stock XY joints already) 4 M5x16 2 M5x10 2 Dehubbed/Deflanged 20T GT2 Pulley 2 Github There is also a zip file for a…

Downloads
146
Likes
63
Rating
5

Kreidler RS Cross 1974 scale 1:8 disigner Ed van der Heijden. (pictures and print, Ruud Groen)

Kreidler RS Cross 1974 Met dank aan Ruud Groen die deze mooie brommer voor mij geprint heeft en tevens zijn echte Kreider RS uit 1974,, op foto, ter beschikking heeftgegeven. Spoke rim only: without support Supports: Yes Resolution:…

Downloads
145
Likes
19
Rating
0

Flsun V400 - Beefy Idlers

A beefier version of idler holder for V400. What's better? Adds space between the idler pulley so there's a room for self-alignment, so the sides of the belts are not being rubbed on by side rim of the pulley Allows to use a sexton screws…

Downloads
143
Likes
40
Rating
0
P

Stronger Idler for MMU2S

I broke the original part at the motor shaft connection. I have made some changes that fix this problem. The idler is in two parts, the first part is bolted to the second part with three screws. A piece of metal with two screw holes is…

Downloads
141
Likes
30
Rating
4
P
Printableswavexx

Prusa MK3 Bear 20T 5ID Gates Y idler + tensioner

Rework of the original Y idler by gregsaun for the MK3 Bear 2.0 full upgrade with a belt tensioning and tracking mechanism which uses a Gates 20T 5ID toothed idler. For a version using the stock 20T 3ID smooth idler, look at my previous…

Downloads
139
Likes
24
Rating
5
P
Printablessiroberts

Prusa Mk3s+ MMU3 extruder idler door, IR trigger

squared off and trimmed IR trigger

Downloads
136
Likes
11
Rating
5
P
Printablesprint.me!

Idler stabilizers for TwoTrees Sapphire Plus SP-5 [REMIX]

- ugly remix of the corner mounted stabilizers to be compatible with inward facing enclosures - remix of the X rail idler stabilizers to give the belts even more room and be better compatible with F695 bearings (now actually) First…

Downloads
135
Likes
18
Rating
0
P
PrintablesF Engineering

Verkleidungs-Schraube Kreidler Flory

Verkleidsungs-Schraube für Kreidler Flory Modelle Zwei Versionen: Blinde Version für saubereren Abschluss der Verkleidung, kann auch mit Handkraft noch gut eingeschraubt werden. Original Version für den originalen Look, schraubbar mit…

Downloads
133
Likes
4
Rating
0
P
PrintablesLenny421

PRUSA MK3S Idler Door Remix - MMU2S Version

Remix of https://www.thingiverse.com/thing:3504682 Unfortunately, the first one didn't work, so I fixed it. Just download the v2 Version. MMU Version with the "long arm" to trigger the filament sensor. Print it in PETG 20% Grid Infill at…

Downloads
132
Likes
8
Rating
4.5
P
PrintablesParasitKegel

Single Wheel Nextruder Idler Lever for Brittle Filaments

General When printing particulary brittle filaments like PET-CF the two idler wheels on the Nextruder can intruduce too tight bending radii and inturn break the filament. This is a Drop-in replacement for Nextruder idler lever. Based on…

Downloads
130
Likes
45
Rating
5
P
Printablesmbrowwwn

MMU2 Idler Tensioner Knobs

MMU2 Idler Tensioner Knob Created a knob for quick access to open the MMU for servicing. (i.e. jams / re-seating broken filament / adjusting the tension force) Having knobs eliminates the need to use an Allen or Hex key to open the MMU…

Downloads
130
Likes
28
Rating
4.75
P
PrintablesINVESTEGATE

Prusa XL modified CoreXY parts for new O-rings or Washers with LDO Idler Pulleys 10mm

Hello XL makers! This i a Remix of a few Remixes :D Thanks to all of them <3 Lukáš Kupec , sshyshak , Racemade3D , racerethan , Prusa Research This remix was made for pulleys from LDO or Gates that have a thickness of 10mm. The original…

Downloads
129
Likes
36
Rating
5
P
PrintablesVitalii3D

Printable parts for CNC Front Idlers

Some parts can be printed for color customizations. Please print using standard Voron parts print settings

Downloads
129
Likes
17
Rating
5
P
PrintablestheHeig

Remixed Extruder Idler - stops shaft slippage! (MK3S+ only)

After having experienced the frustration of trying to narrow down “clicking” emanating from the extruder and prints clearly showing issues related to inconsistent extrusion, I was glad to find that in my case, the simple fix was to…

Downloads
129
Likes
17
Rating
5
P
Printablesnw

Voron 0.2 simplifyed and (hopefully stronger) Idler Cam Lock

I broke a lot of the original ones, so I replaced the logo with a simple slot, hoping not to break it so fast with my screwdriver.

Downloads
128
Likes
20
Rating
5

*IAF Idler 1.1+* for PRUSA Nextruder noMMU **Unleash the full potential of the PRUSA Nextruder PG-Pulley**

Compatible with all PRUSA Nextruder (NO MMU) (MK3.9, MK4/S, CORE One/L, Prusa XL) Frustration-free and with hollow grinded Filament Recovery Version for PRUSA Nextruder WITH MMU can be found here Updates: 17.01.2026: added modified CORE…

Downloads
127
Likes
36
Rating
4.2
P
PrintablesJason Van Hek

Qidi X max 3 Y axis repair. Y axis motor mounts and front idlers

This is the Y axis on a X max 3 with significant strength upgrades. Use the existing rods and pulleys off the originals. there is a lot of supports used. I have attached a .3mf file as an example. ( you can print this and be happy ) 4…

Downloads
126
Likes
29
Rating
0