IKEA Skadis Wall Mount
Screw: diameter: up to 6mm length: 30mm or more
Print approx. €0.49–€0.59 excl. taxPreliminary estimate for one variant
- Downloads
- 12,456
- Likes
- 3,013
- Rating
- 4.96
18,863 models
Screw: diameter: up to 6mm length: 30mm or more
Print approx. €0.49–€0.59 excl. taxPreliminary estimate for one variant
Remix of version V2.1 by Simon with 10 instead of 5 slots. Fits square lids with a length of 15 cm or rectangular lids with a length of 21 cm (upright) Printed using PETG | 30% infill | no supports required
Print approx. €10.85–€13.26 excl. taxPreliminary estimate for PETGSource material: PET
Various connectors compatible with Brio, IKEA Lillabo (old plastic dogbone and current wooden-only version too), Thomas Train, Kaufland, LIDL Playtive, kmart, ebay,... wooden tracks. UPDATE: 30 mm male-male connector! Print instructions…
Print approx. €0.22–€0.27 excl. taxPreliminary estimate for one variant
Minimalist Duplo - Brio, IKEA, Wooden Train adapter that you can use for connecting Duplo bricks with wooden train tracks to make bridges and slopes. The peg on the outside is modified a bit so it fits on a Duplo brick too. Print with…
Print approx. €0.85–€1.04 excl. taxPreliminary estimate for PETGSource material: PET
Hallo zusammen, hier mal wieder einige Optimierungen für meine 3D-Druckwerkstatt, die ich euch gerne zum Nachdruck übergeben möchte. Um die Druckqualität zu erhöhen, habe ich mir dann doch mal einen Drybox gebaut und verschiedene Entwürfe…
Print approx. €2.59–€3.17 excl. taxPreliminary estimate for PETGSource material: PET
I like things that are not permanent, easy to install or remove so i created my own Screwless IKEA SKADIS Wall Mount using 3M Command Large Picture Hanging Strips What you need IKEA SKADIS Board or 3D Printed SKADIS Board 3M Command Large…
Print approx. €2.53–€3.09 excl. taxPreliminary estimate for PETGSource material: PET
Tips are appreciated and go towards creating new designs A friend of mine is into wargaming and wants to organize his paints a little bit better to have them easily accessible and all stored neatly. He saw the design by Black Hussar which…
Print approx. €4.92–€6.01 excl. taxPreliminary estimate for one variant
I don't like to throw all of my utensils into one big container, so I've designed this internal divider for the Ikea ORDNING utensils holder. It's designed to snap into place (the upper part has a lip that grips the edge). There's also a…
Print approx. €2.63–€3.22 excl. taxPreliminary estimate for PETGSource material: PET
I've build a toy train (BRIO / IKEA compatible) that I've made for my son. This is the older model with 2 types of screws - the newer ones are far better designed and use only 1 type of screws for everything (check the link to my premium…
Print approx. €0.61–€0.75 excl. taxPreliminary estimate for one variant
No support needed. Use 4x20 mm wood screws without predrilling.
Print approx. €6.55–€8.01 excl. taxPreliminary estimate for PETGSource material: PET
BNSF diesel locomotive toy train (BRIO / IKEA compatible) You will need the following screws to put everything together. 14x ISO 14585 (DIN7981) 2.9mm x 13mm ( https://amzn.to/3WgKty1 ) 2x ISO 14585 (DIN7981) 2.9mm x 19mm (…
Print approx. €0.33–€0.41 excl. taxPreliminary estimate for one variant
Holder for a slightly thicker cutter or scissors on an IKEA Skadis board. I printed this model with PLA with 0.2mm layer height.
Print approx. €0.24–€0.29 excl. taxPreliminary estimate for one variant
Bracket for a wire cutter. Fits on a IKEA Skadis Board. Base on the Fusion 360 peg models from Rkimmell73 https://www.thingiverse.com/thing:3734897 You can find the whole IKEA Skadis pegboard one my blog (article is in German):…
Print approx. €0.37–€0.45 excl. taxPreliminary estimate for PETGSource material: PET
Bridge support compatible with Ikea and Brio wooden train track. Minimalistic design that allows great variability of use. Main features: Tracks connector for better stability Stackable to create higher bridges Easily printable without…
Print approx. €1.45–€1.77 excl. taxPreliminary estimate for one variant
I wanted to have a nice front panel for my Ikea Lack Enclosure with some buttons to turn on the printer, some LED and the Raspberry Pi. I designed this really simple front panel with three holes (20mm) for the buttons and on the other…
Print approx. €5.84–€7.14 excl. taxPreliminary estimate for one variant
Modular filament storage & dry box using the IKEA 10.6l containers that can fit 2 spools of 1kg filament. All the parts for one box fit on the buildplate of the MK4 and can be printed at once. Currently for storage only, but that's all i…
Print approx. €6.97–€8.52 excl. taxPreliminary estimate for PETGSource material: PET
Tank car for toy train (BRIO / IKEA compatible). This is the older model with 2 types of screws - the newer ones are far better designed and use only 1 type of screws for everything (check the link to my premium toy trains below). You…
Print approx. €0.67–€0.82 excl. taxPreliminary estimate for one variant
Christmas and Holiday themed tealight lantern lithophane ball. Lantern fits LED tea candle IKEA GODAFTON 4 versions: simple image with NO TEXT: "svicka_panorama.stl" simple image WITH PF2022 TEXT: "svicka_panorama_PF_opr.stl" detailed…
Print approx. €2.51–€3.07 excl. taxPreliminary estimate for one variant
Holder for a folding rule.Fits on a IKEA Skadis Board. Based on the Fusion 360 peg models from Rkimmell73 https://www.thingiverse.com/thing:3734897 You can find the whole IKEA Skadis pegboard one my blog (article is in German):…
Print approx. €1.04–€1.27 excl. taxPreliminary estimate for PETGSource material: PET
Having a variety of Samla Clips I decided to label them with the matching box volumes. Also extended/shortened all clips to 3cm width - Make sure you use the correct print orentation to avoid overhangs - Remixes of the following models…
Print approx. €3.08–€3.76 excl. taxPreliminary estimate for one variant
I designed this IKEA Kallax Hider for hiding the view from the backside of my IKEA Kallax. It prevents seeing the backside from books, folders and helps to collect less dust in these compartments. :) To build you will need to print:…
Print approx. €0.06–€0.07 excl. taxPreliminary estimate for one variant
Union Pacific toy train (BRIO / IKEA compatible). This is the older model with 2 types of screws - the newer ones are far better designed and use only 1 type of screws for everything (check the link to my premium toy trains below). You…
Print approx. €1.92–€2.34 excl. taxPreliminary estimate for one variant
Update [2024-11-12]: Just to make clear, there are several versions to use according to printer capability: 0.20 clearance 0.35 clearance 0.50 clearance Original Also changed the position of the model, to half-open, so it is easier to…
Print approx. €2.35–€2.87 excl. taxPreliminary estimate for one variant
Norfolk Southern diesel locomotive toy train (BRIO / IKEA compatible). This is the older model with 2 types of screws - the newer ones are far better designed and use only 1 type of screws for everything (check the link to my premium toy…
Print approx. €0.67–€0.82 excl. taxPreliminary estimate for one variant
A modular charging smartphone stand for the IKEA LIVBOJ wireless charger pad. The phone can be held in both portrait and landscape orientation with the charging pad still placed in the middle of the phone. The cable runs in a slit in the…
Print approx. €13.41–€16.39 excl. taxPreliminary estimate for one variant
FR: Il peux porter des tailles de anse jusqu'à 45mm EN: It can carry bight sizes up to 45mm
Print approx. €1.55–€1.89 excl. taxPreliminary estimate for one variant
This is a 100% re-model from 3DDIY Stackable Shoe Rack, adapted to fit IKEA BURHULT . I've included the .stp file, so you can remix it further. Parts For assembly you will need: printed parts 1x IKEA BURHULT For parts print the following:…
Print approx. €9.83–€12.02 excl. taxPreliminary estimate for PETGSource material: PET
Adapter to mount Ikea Skadis directly to the wall with screws and your own screw. I use it to fix the bottom of the board. You will need an M3 nut. Adaptador para montar Ikea Skadis directamente a la pared con tornillos y su propio…
Print approx. €0.42–€0.51 excl. taxPreliminary estimate for PETGSource material: PET
I needed to separate the fasteners in the 5l IKEA Samla box. I managed to get a 3D model of it, so modelling the partition was a matter of a few minutes. I modelled the partitions in two versions. If the partition is too tight in your…
Print approx. €2.56–€3.12 excl. taxPreliminary estimate for PETGSource material: PET
IKEA SKADIS Shelf with Honeycomb Pattern Dimensions of the bottom part of shelf (plus outer brims and hooks..) 20 x 120 mm 30 x 120 mm 30 x 160 mm Sliced with the modifier to expose the infill pattern You can freely change the infill…
Print approx. €0.63–€0.77 excl. taxPreliminary estimate for one variant
Upgrade your IKEA Kallax storage unit with the Kallax Hider panel system! Remixed for a more robust and reliable solution to cover the unsightly gaps in your Kallax shelves. The design connection mechanism was enhanced, ensuring…
Print approx. €4.32–€5.28 excl. taxPreliminary estimate for one variant
[En] To make it easier to store my many brushes and save time finding the right one, I've created a pot to hold 28 miniature painting brushes. There's a model to put on a table and another to fix on the Ikea Skådis pegboard. I reused the…
Print approx. €8.80–€10.76 excl. taxPreliminary estimate for one variant
I wanted a clean, easy-to-use Skadis holder made specifically for the LTT screwdriver — and after trying a bunch of designs online, none quite worked due to the screwdriver’s unique shape. So I made this! The goal: ✅ Minimal enough to…
Print approx. €0.79–€0.96 excl. taxPreliminary estimate for one variant
Hang your headphones on Ikea pegboard. Prints without supports, hooks onto pegboard. Modelled for Sony WH-1000XM4.
Print approx. €1.31–€1.60 excl. taxPreliminary estimate for one variant
Shower holder with two angles for Your shower head with Mount - Base fitting on IKEA Tisken suction cup hanger. I remixed and slightly modified the two original models to create my first very simple model. I hope it will be useful to You.…
Print approx. €1.55–€1.89 excl. taxPreliminary estimate for one variant
A simple and quick print to replace any broken or missing clips for the affordable IKEA Schottis blinds . I needed some extras for spares and replacements so I took to may callipers and made a replacement, this has been designed to be as…
Print approx. €0.19–€0.23 excl. taxPreliminary estimate for one variant
A simple holder for tweezers that only requires 2 slots in a row.
Print approx. €0.30–€0.37 excl. taxPreliminary estimate for one variant
It has a little give juist like the real chair! not as comfy though… Also check out Elitail version. Printing Material PLA Nozzle 0.4 (basic) Generate support On Overhand threshold 35º Support Style Organic Support on build plate only On…
Print approx. €1.67–€2.04 excl. taxPreliminary estimate for one variant
Shorter LCD supports designed so that the MK3/S can fit inside an Ikea Stuva enclosure with a hole for the bed cables. There is one hole for each side, slightly smaller than the bolt. Use a m3x10 bolt to thread directly into the plastic.…
Print approx. €1.07–€1.31 excl. taxPreliminary estimate for one variant
I created a bracket for the Parkside 12V wall charger IKEA Skadis. You need to print in portrait, use supports and I recommend a brim. You can use my attached 3mf file where everything is properly set up and tested. I recommend first…
Print approx. €1.69–€2.06 excl. taxPreliminary estimate for one variant
Printed in PETG with a 45 degree tilt for greater resistance. The stl file is already placed in the correct position. - Enable borders - Activate organic supports - Gyroid filling at 20%
Print approx. €0.61–€0.75 excl. taxPreliminary estimate for PETGSource material: PET
This is a IKEA TISKEN replacement hook remix of the IKEA STUGVIK / TISKEN attachment (exact size) printed in two parts with no support careful, it's a very tight fit
Print approx. €1.07–€1.31 excl. taxPreliminary estimate for one variant
This template is for marking the mounting holes for the 2025 type Ikea Utrusta (110°) and Blum Clip Top Inserta hinges. The small part of the template is for the cupboard side, the big part for the door side. All you need is a pencil and…
Print approx. €0.85–€1.04 excl. taxPreliminary estimate for PETGSource material: PET
Drawer insets in various sizes with different compartments for the IKEA Helmer drawer unit. I sliced the the model with thirds vertically in half as a smaller variation. Only when creating the technical drawings I noticed that the model…
Print approx. €3.04–€3.71 excl. taxPreliminary estimate for one variant
Side baskets for IKEA Pax (depth 35 cm)
Print approx. €3.36–€4.11 excl. taxPreliminary estimate for one variant
On July 20th, 1969, the world felt just a little bit larger as Neil Armstrong and Buzz Aldrin set foot upon the lunar surface – the first humans to ever do so (only after leaving their friend Michael Collins alone in orbit about the…
Print approx. €2.12–€2.59 excl. taxPreliminary estimate for PETGSource material: PET
The otherwise very practical IKEA lamp, for clipping onto a shelf, has unfortunately broken. Both parts of the clamp broke after only a few years and the whole lamp could no longer be used. In FreeCAD I designed a replacement part for it,…
Print approx. €1.67–€2.04 excl. taxPreliminary estimate for PETGSource material: PET
What you need Dummy 13 Version 1.0! printed at 250% KAPPLAKE LED spotlight Printed parts Choice of helmets armor_helmet armor_helmet_w_visor Optional add-on cable_adapter Astronaut Remix outer_chest large_pack Change Log 2025-02-01 Added…
Print approx. €0.13–€0.16 excl. taxPreliminary estimate for PETGSource material: PET
The HÖGSMA cutting board from IKEA sits too loosely on the RÅSKOG utility cart, these spacers reduce the wiggle and prevent the board from falling into the top tray. Uses four 0.5" (12mm) wood screws but sticky tape/liquid adhesive can be…
Print approx. €2.75–€3.36 excl. taxPreliminary estimate for PETGSource material: PET
Once I completed my Lack enclosure, I recognized a need for tool organization that would be minimal, accessible, & easily relocated for future needs. I searched and found several prints, some slipped over the leg completely (would require…
Print approx. €2.59–€3.17 excl. taxPreliminary estimate for PETGSource material: PET
Made for use with two (2) Universal Hooks from : https://www.thingiverse.com/thing:2853257/files Huge thanks to CSD_Salzburg for the hook design. I wanted something to keep my paints upside down, so this is what I came up with.
Print approx. €2.74–€3.35 excl. taxPreliminary estimate for one variant
No support - two part soap holder utilizing IKEA TISKEN for its base! Only thing you need is a IKEA TISKEN (← click to open). Print both parts, insert first part onto the IKEA holder and slide the second part in. This is second part of my…
Print approx. €2.59–€3.17 excl. taxPreliminary estimate for one variant
This is a remix based on the Complete IKEA Drybox Solution idea from crashdebug on thingiverse with some element ideas from Mihai's DryBox on thangs. All parts but roller_mount_inside and roller_mount_outside are done from scratch in…
Print approx. €1.26–€1.54 excl. taxPreliminary estimate for one variant
Printinformation: Use Support for the hooks. ("Support on build plate only") Thanks to https://www.printables.com/@Historicc_559983 for providing the Parametric IKEA Skadis Hooks i used in this Model.…
Print approx. €1.21–€1.48 excl. taxPreliminary estimate for PETGSource material: PET
I designed this drilling jig to assemble my BESTA cabinet doors on a METOD cupboard. Align the end of the jig with the end of your cabinet (your cabinet door ends here). There is a triangular cutout to mark the middle of the hinge, so…
Print approx. €1.46–€1.78 excl. taxPreliminary estimate for one variant
To replace the Ikea Pressa clothespin who's breaking all the time . My model have a print in place pivot point for a better life span. Print instructions Print in one part and press ( until you hear a clic) it before use. Install the…
Print approx. €0.56–€0.68 excl. taxPreliminary estimate for PETGSource material: PET
🇬🇧 IKEA Tradfri Motion Sensor Corner Mount A holder to mount an IKEA Tradfri motion sensor in a corner. The sensor is simply plugged onto the holder. The holder can be glued into the corner, but also has a hole for a countersunk screw. 🇩🇪…
Print approx. €0.32–€0.39 excl. taxPreliminary estimate for PETGSource material: PET
What you need IKEA TISKEN Printed Part(s) Soap Dish Holder Optional Soap Dish Container Soap Dish Hook Print Instruction Nozzle diameter : 0.40mm Use Default Prusa Slicer 0.20mm IS Structural Print Settings Filament : PLA or PETG Infill :…
Print approx. €0.54–€0.66 excl. taxPreliminary estimate for one variant
plastový držák - IKEA LOCK 16418 STROPNÍ SVÍTIDLO
Print approx. €0.45–€0.55 excl. taxPreliminary estimate for PETGSource material: PET
Great vase for your plants, hypnotic mix of spiral inside a honecomb texture. Your plants will love it! Print information fo Ikea Fejka: Recommended 0,15 for more detailed spirals (5% infill, 3 top layers, 4 or 5 bottom layers) Prints in…
Print approx. €2.93–€3.58 excl. taxPreliminary estimate for one variant
Two models are available: Square Adapter Mount (Recommended) - Easier to print and does not require any supports. Circular Adapter Mount - Looks better but requires requires additional supports. Printing Instructions Note that depending…
Print approx. €0.17–€0.20 excl. taxPreliminary estimate for one variant
Here are the settings I've used on my Ender 3 with Prusa Slic3r: 0.16 layer height - makes it stronger and nicer; organic support material for the hooks - you could also use grid, doesn't change much; grid infill 15% - any pattern could…
Print approx. €1.14–€1.39 excl. taxPreliminary estimate for one variant
This custom-designed wall mount is specifically created for the Ikea Starkvind air purifier, providing a secure and space-saving solution for mounting it on a wall. The holder is robust and easy to print, ensuring a perfect fit for your…
Print approx. €6.19–€7.56 excl. taxPreliminary estimate for one variant
Why settle for just one hook when you can have two :-)
Print approx. €0.66–€0.80 excl. taxPreliminary estimate for one variant
Headphone holder with a custom hook for the Ikea Mosslanda shelf. The shelf lip is ~12.7mm (~½ Inches), to fit snuggly, I designed the clip to be 12.65mm. There are multiple variants for different headphones sizes: Very large: fits…
Print approx. €2.40–€2.93 excl. taxPreliminary estimate for one variant
I liked the idea of the deburring tool holder and the idea of 45 degree printing to avoid supports. So I designed my own holder using these ideas for my Skadis panels. Fits CGBOOM brand tool. Feel free to ask me to adapt this model if you…
Print approx. €2.53–€3.09 excl. taxPreliminary estimate for one variant
Stable box for the desiccant which goes under the spoolholders of the ikea drybox (Samla, 22L). https://www.printables.com/de/model/98008-drybox-for-4-spools-ikea-samla-22l-based/files
Print approx. €4.98–€6.08 excl. taxPreliminary estimate for one variant
3D file of the original IKEA Tisken support to replace the original suction cup with custom hooks, wallmount etc. Example here: https://www.printables.com/model/319150-ikea-tisken-hook Support is needed. See gcode.
Print approx. €0.34–€0.41 excl. taxPreliminary estimate for one variant
Cable box holder 160x62mm for Ikea skadis or similar. If you need it in a different size you can always try to scale the model without hooks and add the hooks later. The brand of cables I use:…
Print approx. €3.09–€3.78 excl. taxPreliminary estimate for one variant
Mise à jour 2024-10-01 - Ajout du fichier paramétrique pour Fusion 360 pour la patte vissé Longueur total de la visse, Épaisseur du coussinets et son diamètre Update 2024-10-01 - Added the parametric file for Fusion 360 for the screw leg…
Print approx. €1.84–€2.25 excl. taxPreliminary estimate for PETGSource material: PET
I wanted a hook for my Ikea Råskog, but all available hooks here were a little too loose, so I created this model. It fits very tight and well. It consists of two parts. The smaller part is inserted after the hook is in place. It has a…
Print approx. €0.31–€0.37 excl. taxPreliminary estimate for PETGSource material: PET
The dimensions of the cutting board slots are 18mm for wooden 9mm for IKEA cutting boards Update: I've added a second file for only the IKEA cutting boards. I hope you enjoy this remix!
Print approx. €6.54–€7.99 excl. taxPreliminary estimate for one variant
We needed to mount the översidan LED strip to a wardrobe with a top lip that prevented using the standard mounting hardware. This is a very simple screw-in clip mount for the LED strip. I used a MK4 with the Input Shaper 0.20mm STRUCTURAL…
Print approx. €0.21–€0.26 excl. taxPreliminary estimate for one variant
i create a hook for the Ikea Billy Regal Print instructions Infill between 10-15% You need no support for printing
Print approx. €0.68–€0.84 excl. taxPreliminary estimate for one variant
⭐ Hit Like and stash it in your collection – your future self will thank you! ❤ Organize your build plates of all sizes in style! This minimalist, premium-looking holder is designed to fit the IKEA SKÅDIS pegboard and securely store up to…
Print approx. €1.97–€2.41 excl. taxPreliminary estimate for one variant
Fast to print phone holder that you can mount to any smooth surface! Only thing you need is IKEA TISKEN (← click to open). Print both parts, insert first part onto the IKEA holder and slide the second part in. According to IKEA, each hook…
Print approx. €1.37–€1.67 excl. taxPreliminary estimate for one variant
You need the adapter to mount the MK4 Display in front of the Ikea LACK enclosure
Print approx. €0.20–€0.25 excl. taxPreliminary estimate for one variant
This is a bobbin spool holder designed specifically for the IKEA SKÅDIS system . It keeps your sewing machine bobbins neatly organized and easy to access — perfect for keeping your workspace tidy. I created this model for my wife’s sewing…
Print approx. €4.58–€5.60 excl. taxPreliminary estimate for one variant
I use my Morakniv knife a lot so I wanted it more accessible, mashed two models together and hung it up on my SKÅDIS! Print with the mount plate facing down, use supports.
Print approx. €0.25–€0.31 excl. taxPreliminary estimate for PETGSource material: PET
Angled clip for IKEA Ledberg LED light (the rigid version, not the flexible) to replace the included straight clips. Suitable for the lighting in a printer enclosure.
Print approx. €0.25–€0.30 excl. taxPreliminary estimate for one variant
The way you can store your filaments in the Ikea Samla boxes is great. But then you need an cupboard to place all your Samla boxes in. And I did not want that. So I created two holders that combined can hold a full Samla box. I have…
Print approx. €1.17–€1.43 excl. taxPreliminary estimate for PETGSource material: PET
Add light for your Ikea Skadis. 8 Grams No support needed
Print approx. €0.49–€0.60 excl. taxPreliminary estimate for one variant
Update: I added a mirrored version of all bottom corners, top corners, and the middle bottom hinge. This is my version of the IKEA Lack enclosure. It is higher to put a plate of foam and concrete plate/ stone plate under the printer to…
Print approx. €0.33–€0.41 excl. taxPreliminary estimate for PETGSource material: PET
The default plinth joiner piece for the IKEA METOD system was tiny and easily knocked off while vacuuming and eventually lost and does not cover gaps. Designed a new piece using the joiner nubs for the original plinth end cap pieces and…
Print approx. €0.61–€0.74 excl. taxPreliminary estimate for PETGSource material: PET
Da ich in der Werkstatt für ein Billy-Regal noch zusätzliche Löcher brauchte, habe ich diese Bohrhilfe gemacht. Bohrergröße 5mm. Die großen Löcher sind nur um Material zu sparen. In der Fusion360-Datei sind die Abhängigkeiten so gewählt,…
Print approx. €1.31–€1.61 excl. taxPreliminary estimate for one variant
This is a customizable hook designed to snap onto the cross members of IKEA IVAR side units (Like these ). The STL file included is for the small hook shown in the pictures; It is perfect for things like keys or cords. See the section…
Print approx. €0.21–€0.26 excl. taxPreliminary estimate for one variant
Each dot represents a week and each row has 62 dots so a bit over a year. Print instructions The board is from IKEA It takes a bit of force to push the pins so I used one of these to spare my fingers the pain.
Print approx. €2.81–€3.44 excl. taxPreliminary estimate for one variant
Smaller pins for IKEA UPPDATERA. Printed with PLA,PETG, ABS, ASA, ASA275 at 0.2mm and 3 perimeters layer height, 20% infill with supports. execution on video:…
Print approx. €0.32–€0.39 excl. taxPreliminary estimate for one variant
IKEA SKADIS Pocket Knife Hook Clip for your pocket clip. Simply clip your pocket knife to this hook / holder. It works for almost anything with the pocket clip, not only knives, but also multitools and flashlights. Tested with following:…
Print approx. €0.17–€0.20 excl. taxPreliminary estimate for one variant
The Chandelier is based on the socket Ikea HEMMA E27. Instructions: 1) Print the parts (8 pieces) from PETG, ABS 2) Glue parts together with all purpose adhesive or cyanoacrylate (see Image) 3) Install socket Ikea Hemma E27 4) Install the…
Print approx. €4.68–€5.72 excl. taxPreliminary estimate for PETGSource material: PET
Schraubbarer Trichter zum leichteren Einfüllen von Gewürzen und Kräutern in die sehr beliebten Ikea 365+ IHÄRDIG Gewürzgläser / Gewürzmühlen. Ebenso passt er für nahezu jedes Gewürzglas auf dem Markt, sei es Rewe, Edeka, Penny, Norma,…
Print approx. €1.80–€2.20 excl. taxPreliminary estimate for PETGSource material: PET
You can find my other Skadis accessories here : https://www.printables.com/@Snil_3994788/collections/3008539
Print approx. €2.93–€3.58 excl. taxPreliminary estimate for one variant
Organizer box for Alex
Print approx. €3.63–€4.44 excl. taxPreliminary estimate for one variant
I bought this clock because this is the cheapest one you can buy in IKEA and it's easy to remove the transparent front “glass” and put in some instructions that my daughter drew for herself. Usually, I have to move this clock around quite…
Print approx. €2.11–€2.58 excl. taxPreliminary estimate for one variant
CZ: Můj pokus o náhradní kolíček k sušáku IKEA PRESSA. Ačkoliv se nejedná o remix, podobných modelů najdete spoustu. Místo problematického “ohýbacího místa” se otáčí kolem osy. Print-in-place tisk, celý kolíček i s čepem a otvorem se…
Print approx. €0.43–€0.52 excl. taxPreliminary estimate for one variant
Labels holders / tags for Ikea Kallax drawers and doors. I found this on thingiverse but also wanted this with larger labels and for doors. Labels can be printed with a Dymo Printer Included: Sizes 28x89mm (Original model, for Dymo…
Print approx. €0.36–€0.44 excl. taxPreliminary estimate for one variant
Uploaded two versions - 1.0mm and 1.2mm. The site renamed the stl files to 10mm & 12mm which is not correct. Print instructions I'd suggest to use PETG, PLA is not UV resistant and will be "baked" very quickly.
Print approx. €0.24–€0.30 excl. taxPreliminary estimate for PETGSource material: PET
Remix the model to make the part that goes inside the leg a bit higher and screw holes diagonally.
Print approx. €5.81–€7.10 excl. taxPreliminary estimate for one variant
A a new Idea for your household or as a replacement for a broken lid to make a second life for the jar possible. Tested and suitable for €uro coins. If you are interested in the surface pattern and how you could spice up your prints:…
Print approx. €2.99–€3.65 excl. taxPreliminary estimate for one variant
Drawer Organisers Universal/IKEA ALEX
Print approx. €0.92–€1.12 excl. taxPreliminary estimate for one variant