Einhell Akku Wandhalterung
Einhell Akku Wandhalterung
Print approx. €3.60–€4.40 excl. taxPreliminary estimate for PETGSource material: PET
- Downloads
- 2,795
- Likes
- 191
- Rating
- 4.96
2,264 models
Einhell Akku Wandhalterung
Print approx. €3.60–€4.40 excl. taxPreliminary estimate for PETGSource material: PET
Heavy-Duty holder for Milwaukee M18 batteries, which was created specifically for the larger high-demand and new FORGE batteries. The holder can be mounted on the wall (designed for 4.5 or 5.0 mm screws), but since the batteries also lock…
Print approx. €3.17–€3.88 excl. taxPreliminary estimate for one variant
Famous Planes Famous Planes is a set of airplanes in kit cards you have to build. Those are perfect gifts ! You can find the whole collection here 😊 ! Fokker Dr.I This is another plane for your collection : the famous Fokker Dr.I, which…
Print approx. €1.39–€1.70 excl. taxPreliminary estimate for one variant
Happy printing!
Print approx. €1.81–€2.22 excl. taxPreliminary estimate for PETGSource material: PET
Not sure where my key was lost, but I made this to allow me to change settings on my Hakko FX-951 soldering Station. It will probably work on other Hakko soldering stations that use this same key. When printing this use 100% infill, since…
Print approx. €0.20–€0.24 excl. taxPreliminary estimate for PETGSource material: PET
Find english version below... Box bzw. Behältnis zur Aufbewahrung von AA-Akkus (HR6) und/oder AAA-Akkus (HR03). Unterschiedliche Bereiche und Farben dienen der Unterscheidung ob die Akkus VOLL aufgeladen oder LEER sind. Die…
Print approx. €0.43–€0.53 excl. taxPreliminary estimate for one variant
Festool Akku Wandhalterung
Print approx. €6.15–€7.52 excl. taxPreliminary estimate for PETGSource material: PET
zwei Akkus von Einhell in einer Hand tragen die Akkus können auch einfacher getragen werden, wenn sie nicht im Gerät sind ideal für 36V Geräte von Einhell, bei denen zwei Akkus benötigt werden die Kontakte der Akkus bleiben geschützt -…
Print approx. €2.90–€3.55 excl. taxPreliminary estimate for PETGSource material: PET
Wandhalter für Makita 18V Akkus
Print approx. €2.20–€2.69 excl. taxPreliminary estimate for one variant
Simple tenting platform for Silakka54 keyboard with case . 5deg, 10deg, 15deg, 20deg, 25deg
Print approx. €2.09–€2.55 excl. taxPreliminary estimate for one variant
My wife wanted a toy hanger for the Newborn seat. I made a model in SolidWorks based on pictures from the original one. Because it is too large to fit on the printbed I bend the model untill it fit the build volume. Afterwards I heated it…
Print approx. €0.88–€1.08 excl. taxPreliminary estimate for PETGSource material: PET
Smurf, Smurfette, Papa Smurf Cokkie Cutters Stamps and Blades
Print approx. €1.10–€1.35 excl. taxPreliminary estimate for one variant
This wall mount is designed for Einhell Agillo 36/255 and the original accessories and tools, but may also fit for other scythes. I used PETG, 3 perimeters and 0,2 layer height. Happy printing!
Print approx. €7.76–€9.48 excl. taxPreliminary estimate for PETGSource material: PET
Ferrex Aldi Akku Halter
Print approx. €5.25–€6.42 excl. taxPreliminary estimate for one variant
Old Babylonian culinary tablet (1900-1600 BC) with Akkadian recipes for 25 stews. Stews from this tablet were studied, cooked & served at An Appetite for the Past at NYU in May 2018. For more info, please see: Martell, B. What did ancient…
Print approx. €11.43–€13.97 excl. taxPreliminary estimate for one variant
Gedruckt mit Prusamet PETG, 0.2mm Schichthöhe, Stützen nur auf dem Druckbett, 3 vertikale Konturhüllen, 25% Füllung
Print approx. €0.95–€1.17 excl. taxPreliminary estimate for PETGSource material: PET
The example on the picture for 7mm holes was printed from PETG but PLA should work as well, I guess. If anyone needs a different size just download the f3d file and edit the parameters, or just let me know and I'm happy to upload a…
Print approx. €0.05–€0.07 excl. taxPreliminary estimate for PETGSource material: PET
I use this mount on my RC planes that need an extremely light weight fpv solution. I use the AKK A11T FPV camera for this, but attaching them to my planes was always pretty janky before I came up with this mount. I used PETG at 0.10 layer…
Print approx. €0.21–€0.25 excl. taxPreliminary estimate for one variant
Modification for Tukkari TLX (Prusa Mini) enclosure, stops the rear extractor fan from touching any walls, giving space for the fan to work and not be obstructed. Print Settings Printer Brand: Prusa Printer: Mini Rafts: No Supports: No…
Print approx. €3.88–€4.74 excl. taxPreliminary estimate for one variant
Jack retention/support system nut for Dacia/Renault Dokker also known as Renault Kangoo in some markets. It's an original model very close to the original part. the center screw hole Isn't fully threaded, you can directly thread it on the…
Print approx. €0.32–€0.39 excl. taxPreliminary estimate for one variant
Covers the slot in the top face of the Tukkari TLX MK3S+MMU2S enclosure, allowing one of the MMU2S feeds to be accessed from the top of the enclosure. I have a dry box holding the four filaments which I use most often, and I use the 5th…
Print approx. €0.65–€0.79 excl. taxPreliminary estimate for PETGSource material: PET
Printing | Recommend PETG or ABS, print hot, lots of perimeters and solid. Press onto the shaft and go. No supports required. I made these almost 4 years ago and they've survived several epic trips since. Hope you find them useful!…
Print approx. €1.21–€1.47 excl. taxPreliminary estimate for PETGSource material: PET
Materials and specifications: PETG or ASA/ABS reccomended; 0,2 layer height; 5 perimeters/shells; 120mm fan ( personally I used this https://amzn.eu/d/gUrk2gO plugged into an octopi ); 4 M4x40 hex screws; Assembly Mount a 120 mm fan…
Print approx. €2.99–€3.65 excl. taxPreliminary estimate for PETGSource material: PET
Keeps foreign object from falling down to print bed, acts as a filament guide, and helps create negative pressure within the case while an exhaust fan is running. There is a little endplay in the slot to allow for the filament to be able…
Print approx. €0.75–€0.92 excl. taxPreliminary estimate for PETGSource material: PET
I've been thinking for a long time about how I'm going to mount my new Mintion Beagle camera into the Tukkari box. All the models of holders that would have been considered were unsuitable for this application, plus they required the use…
Print approx. €1.46–€1.79 excl. taxPreliminary estimate for PETGSource material: PET
Introduction: The original part on my Stokke Xplory was missing because it broke, so I had to create a spare/repair part in order to lock down the seat. I've altered the model compared to the original and made it slightly thicker in hope…
Print approx. €1.04–€1.27 excl. taxPreliminary estimate for PETGSource material: PET
This is an adapter for inflating a Forclaz Trekking MT500 Air mattress from Decathlon with an inexpensive electric mini air pump from Pacoone (square version with lamp). The adapter is simply inserted between the pump outlet and the…
Print approx. €0.27–€0.33 excl. taxPreliminary estimate for PETGSource material: PET
Blende für den Filamentladespalt des Tukkari TS Druckergehäuses.
Print approx. €1.01–€1.23 excl. taxPreliminary estimate for PETGSource material: PET
Om kleine plasticzakken op te bergen in of op de kast. Om te kleven, vijzen of ophangen. Voor het ophang systeem heb ik de tussen latjes gekleefd. Voor die latjes heb ik er een Fusion 360 bestanden bij gedaan. To store small plastic bags…
Print approx. €0.42–€0.51 excl. taxPreliminary estimate for one variant
This cover makes it possible to place the Tukkari case very close to a wall and still be able to use the ventilation. The cover is designed for the use of an inside mounted fan. The profile of the air deflector as well as the spacers is…
Print approx. €4.40–€5.38 excl. taxPreliminary estimate for PETGSource material: PET
The original lens hood was like 20 bucks, so I made my own. Depending on your printer, you may have to carefully file down the tiny plastic tab a little bit so that it snaps in more easily. Since I couldn't find accurate dimensions of the…
Print approx. €1.65–€2.02 excl. taxPreliminary estimate for one variant
With this holder a simple LED profile can be mounted simply and inconspicuously in the Tukkari TLX enclosure. The cable is passed out the bottom of the holder and can be routed along the edge in the TLX enclosure. Material I use a black…
Print approx. €0.68–€0.83 excl. taxPreliminary estimate for PETGSource material: PET
Printing materials like ASA forced me to install a filter on my tukkari enclosure. Missing a model for any stock air filter, I designed it by my self. You also need m3 nuts an screws to mount it on a fan or enclosure.
Print approx. €0.67–€0.82 excl. taxPreliminary estimate for PETGSource material: PET
For use in shopping trolley
Print approx. €0.09–€0.11 excl. taxPreliminary estimate for one variant
I wanted a fan in my tukkari enclosure which blows cool air directly into the ventilation slots of the power supply of my MK3S+. Mounted with snap in.
Print approx. €1.68–€2.05 excl. taxPreliminary estimate for PETGSource material: PET
This is my Enclosure system for the Tukkari TS enclosures (should fit the MINI or MK3 versions). I included zip tie holes in many locations to keep things as tidy as possible. All original design files included as STEP so ready to remix.…
Print approx. €1.22–€1.49 excl. taxPreliminary estimate for PETGSource material: PET
Ich nutze den Drucker mit MMU in einem Tukkari Enclose. Für die fünf Filamente der MMU sind Durchgänge vorhanden. Da ich aber für bestimmte Drucke (z.B. TPU) die MMU ausschalte und den Bypass der MMU nutze, brauche ich eine weitere…
Print approx. €0.12–€0.15 excl. taxPreliminary estimate for PETGSource material: PET
I designed this two piece intake manifold to suck hot air at the top of the enclosure out of the Tukkari TLX MINI enclosure. It clears the PRUSA MINI and should in theory prevent that you get strong drafts when using the fan. The fan is…
Print approx. €2.96–€3.61 excl. taxPreliminary estimate for PETGSource material: PET
Die Temperatur im Tukkari liegt bei PLA und PETG eigentlich immer unter 40°. Auch das Netzteil war bisher maximal handwarm. Trotzdem habe ich einen 40mm USB-Lüfter angebracht, um bei höheren Temperaturen die PSU zusätzlich kühlen zu…
Print approx. €2.61–€3.18 excl. taxPreliminary estimate for PETGSource material: PET
An keiner Stelle im Internet konnte ich ein Gehäuse für einen 476 Akkuumbau finden. Weltweit das Erste ? Kaum zu glauben. Gedruckt hatte ich schon, passt gut, jedoch fehlte mir immer die Zeit, da noch ein paar 18650 einzubauen. Drucken…
Print approx. €1.58–€1.93 excl. taxPreliminary estimate for PETGSource material: PET
The models of the dutch “Blokkendoos” are very nice, but lack illuminated tail lights. For this I designed a new PCB. These prints fit on the LED's used on that print and hold 1 mm diameter flexible lightguides in front of them. The light…
Print approx. €0.49–€0.60 excl. taxPreliminary estimate for one variant
r6 character
Print approx. €2.51–€3.07 excl. taxPreliminary estimate for one variant
Leider sind die Abdeckungen der ungenutzten Anschlüsse unseres Solarspeichers verloren gegangen bzw. haben schon immer gefehlt. Um den Speicher besser zu isolieren, habe ich neue Kappen entworfen und mit Glaswolle ausgefüllt. Da ich im…
Print approx. €3.11–€3.80 excl. taxPreliminary estimate for one variant
Achtung: in der Druckdatei wird bei den Parametern Unsinn angegeben, der aber keine Auswirkung auf die Druckdatei hat. Wie das zustande kommt, ist mir schleierhaft. Ich kann leider keine Korrektur ausführen! Auf den Fotos ist die…
Print approx. €8.24–€10.07 excl. taxPreliminary estimate for one variant
Extra Boden der unter den Rollwagen geschraubt wird. Metabo hat hier bereits Bohrungen für Schrauben vorgesehen. Sollte möglichst massiv gedruckt werden, falls der Staubsauger mal über eine Stufe gezogen wird… Support Filament: PETG
Print approx. €11.41–€13.94 excl. taxPreliminary estimate for PETGSource material: PET
Abdeckkappe für Bohrlöcher
Print approx. €0.08–€0.09 excl. taxPreliminary estimate for PETGSource material: PET
Printed in PLA, 0.2mm no Infill, no Support but used a Brim. Should also work well on PETG or similar material.
Print approx. €0.78–€0.95 excl. taxPreliminary estimate for one variant
Opzetstukken voor de festool-stofzuiger, zo kom je ook in de kleinere kieren. Attachments for the Festool vacuum cleaner, so you can also reach into smaller cracks. Groeten Ludo
Print approx. €1.08–€1.32 excl. taxPreliminary estimate for one variant
Wenn die Regenrinne außermittig ist und nicht in das originale Loch passt.
Print approx. €3.35–€4.10 excl. taxPreliminary estimate for one variant
Wird der Icecube mit dem Akku in der Seitentasche betrieben, hängt das Kabel heraus. Diese Schiene hält und schützt das Kabel mit Magneten. Benötigt werden 5 Magnete 8dx4mm Filament: Extrudr NX2 Grau (PLA)
Print approx. €1.55–€1.89 excl. taxPreliminary estimate for one variant
KKND Machine shop building (Color) I am a big fan of this game, and I found this building to be very iconic. Enjoy. :) Gcode for color printing MMU and 5T XL is also available. The machine shop is the vehicle production building of the…
Print approx. €4.00–€4.89 excl. taxPreliminary estimate for one variant
Schlauchaufnahme ca. 25 mm tief konisch: unten ca. 34 mm; oben ca. 34,7 mm
Print approx. €1.40–€1.71 excl. taxPreliminary estimate for PETGSource material: PET
https://www.buymeacoffee.com/maxt ---------------------- UPDATE 22nd Mar 2023 : The model has been updated to v4. A complete rework based on Tripp Trapp Trofast Clip (metal basket) . That model gave me the idea, that it's much better to…
Hier haben wir eine Wandhalterung für 18V Makita Akkus in der angewinkelten Version. Durch die angewinkelte Halterung lassen sich die Akkus angenehmer einlegen und entnehmen als bei den normalen geraden Versionen. Es sind Versionen für…
Meet Nokko, the squishiest little cephalopod ready to wiggle into your 3D print collection! With his stubby arms and round charm, Nokko is the perfect desk pet, shelf pal, or quick gift idea. He’s printed in one go, support-free, and full…
Abwickler zum Umspulen von Filament auf eine andere Spule mittels Akkuschrauber wenn möglich im Übergang zum Gewinde 90% Füllgrad Die Version V2 bietet die Möglichkeit, innen eine Imbusschraube zu versenken, umd die Stabilität zu erhöhen.…
Mit einer Kaffeespende könnt ihr meine Arbeit unterstützen: https://ko-fi.com/peopleware Danke :-) Für dieses Model existiert eine Version 2: PrecisionWinder NT: Gleiches Prinzip, aber einfacher - noch präziser und kompakter mit…
Angled battery holder for Milwaukee. In 2 versions. Version 1 for screwing with wood screws or version 2 for hexagonal screws. Angewinkelter Akkuhalter für Milwaukee In 2 Versionen verfügbar, Version 1 zum festschrauben mittels…
EDIT: Based on user feedback, I added a version with more tolerances on the hinges. Video on Vimeo: https://vimeo.com/687168699 A battery case for either 4x AAA (+1 AA) or 4x AA batteries! The case has a hinge on the back so the material…
The case should be compatible with the original silakka54 and the SMD versions sold in Aliexpress. The case does not use PCB mounting holes. Heatset inserts goes into the frame and MCU cover. I recommend to add few rubber feet under the…
Habe einen Akkuhalter für Makita 18V Akkus designt. Diese werden mit 2 Schrauben an die Wand geschraubt. dafür sind die 2 Öffnungern. Ich drucke für Produktivität und nicht für Design. I designed a battery holder for Makita 18V batteries.…
The original adapter by @MaxT has a very tight fit on my two Tripp Trapp Stokke chairs from 2020 and 2015 with IKEA Trofast plastic storage boxes from 2024. This remix adds a total of 3mm of extra width (1.5mm on each side) compared to…
Die Halterung für M12 Akkus von Milwaukee ist für die Nutzung mit dem Multiconnect System von @DavidD für Multiboard gedacht. Es gibt ein Modell für die kleinen und eines für die größeren Akkus. Beide Modelle sind so ausgelegt das sie…
Vielleicht kennt der ein oder andere mein Problem. Beim Drucken von Filamentproben verheddert sich das 3D Druck Filament und der Druck schlägt fehl. Doch hier nun meine Lösung für das Problem: ein Filamentaufroller für den Akkuschrauber.…
A P.E.K.K.A. é uma tropa lenta, e tropas lentas geralmente tem uma vida muito alta e um dano alto também, ou seja a P.E.
A mount for the new Hilti Nuron akkus with latch to hold the akkus in place.
I designed this snap-on gadget for Norwegian (Idun) ketchup and mustard bottles earlier this summer. I use this snap-on lid a lot and it makes it so much easier to balance the bottles on its head so I can easily use all of the contents.…
Diese Halter sind für Akkus der Parkside Produkte der 20V Reihe. Sowohl ein Modell für die kleinen Akkus als auch für die Großen.
This remix of the original Silakka54 case has the following differences: case bottom is now solid case top has been integrated into the case bottom case sides walls has been reduced by 50% case walls are now shorter and matches the height…
Keine Lust mehr die Spanngurte händisch auszuwickeln? Dann ist es allerhöchste Zeit meine Aufwickelhilfe für den Akkuschrauber auszuprobieren. Ich habe zwei Varianten erstellt: Spanngurte von 35 bis 50mm Spanngurte 50 bis 75mm PLA…
Print in upright position, no supports needed. Holes are designed slightly undersized so before assembly, drill through holes with 4mm drill. Designed for M4x30 bolt and M4 nut. 1/8 inch imperial hardware should work as well.
This feeder is based on stock K1 extruder. It lets to fix two problems: bad clamping and overheating. There are two versions: KKb - using of stock metal bracket (still can face overheating). In this case one pin on the bracket should be…
I made this spikes for accupressure mats. Printed with PETG 0,2mm 100% infill. Sew or (hot)glue the spikes onto a thick soft towel or pillow. Use on your on risk! You can injure yourself.
I used PETG but you may be able to get away with PLA
Wandhalterung für Werkzeugakku
This is a 3d printable Magazines for the Tikka T3X Tac A1, CTR and Arctic rifles. Included are models for a 5 rnd and a 10 rnd version (with the 5 round variant being the more practical choice) which are a dircet replacement for…
Couldn't get the orginal (https://www.thingiverse.com/thing:3336214) to fit on any available feet. Remixed it to fit these feet (https://www.prusaprinters.org/prints/120019-tripp-trappr-stokke-back-feet)
This is a project of a yacht with features of a typical Dutch "Bakdekker". I am now busy printing the hull and fittings. A STEP file of the entire boat is available. !!! Everything is still in design phase and can still change !!! the…
Druck am besten mit PETG. Die Akkus werden eingeclipt und halten daher auch hängend.
This is a remix of the Artis3D KKm extruder with simplified BOM, adjusted tolerances, and using bigger (4.6mm-5mm OD) heat inserts. It is also compatible with the LDO 36STH20-1004AHG motor (10-tooth version), that offers increased output…
Ein Halter für den Akkuschrauber Bosch GSR 12V-15. Wird von unten mit 4 Schrauben angeschraubt. Akkuschrauber kann bequem von vorne eingesteckt und entnommen werden.
This is a 3D printable switch opener for Kailh Box Switches. Due to the orientation it should hold up well. Needs to be printed with 0.15mm layer height.
A small mixer or stirrer attachment for (cordless) drills. Ø = 50 mm . It takes a 6 mm round shaft , which i just fixed with a small drop of superglue . I needed a small attachment for mixing smaller amounts (perhaps up to a litre) of…
Adapter to attach baby set to old Tripp Trapps with 75mm bracket
Ein Halter für den Akkuschrauber Bosch GSR 12V-15 FC. Wird von unten mit 4 Schrauben angeschraubt. Akkuschrauber kann bequem von vorne eingesteckt und entnommen werden.
Sonic's soap shoes for jakks figure
Famous finnish Marimekko Unikko cookie cutters 3 kind cutters. you can scale how you like but increase Z height if you make it smaller than 100mm wide..
Fokker DR.1 triplane fighter aircraft from World War I, as used by the Red Baron. Designed in Blender for use as a miniature for the BlueMax boardgame Printed on Anycubic Photon S. Licensed under CC-BY-SA-NC-ND. Print Settings Printer…
This little shape can be used as a: Funnel for filling the basket Stand for the basket Distribution tool to help even out the coffee grounds And when not in use it can be conveniently stored inside the moka pot. Versions are available for…
I was looking for a kaz brekker Cane topper 3d model, but couldn't find one that was good enough, so i decided to make my own. During this process I couldn't decide wether i should make the netflix version or the book accurate version, so…
Hier eine Aufbewahrungsbox für den Akkulötkolben von Parkside. Für den Deckel gibt es 2 Varianten, falls man die Klemmelemente aus z.B. weichem Material drucken möchte.
A custom bigger bolt knob for tikka T3X. You will need to glue in in place like the original one.
Dear Friends, If you like the Design leave a like and show some Love. I Bought an Anglegrinder from Makita and realised that the Battery got realy Warm and didnt last at long. So i needed more Power !! For what ever Reason Makita dont…
Simple tenting platform for Silakka54 keyboard. Works without or with bottom plate.
A lone nekker is harmless. Five are dangerous. Ten can kill even a veteran monster slayer.
Ich habe hier eine Wandhalterung für WORX Akkus von ein bis vier Akkus erstellt. Der maximale Schraubenkopfdurchmesser beträgt ca. 6.7mm. ----------------------------------------------------------------------------------------------------…