4,850 models
Imprints clay with a lovely splash texture. 20cm wide. Can be scaled for a smaller version of the pattern. Best printed upright, no support needed. Printed with a 0.4mm nozzle, 20% infill in PLA. The outside can be sanded to make the…
A projector for GoBo that can be mounted on any flash (preferably one with a Led pilot light, such as the Godox MS300V). This is a personal elaboration inspired by the work of Petri Damsten ( http://petridamsten.com/gobo-holder/ ) and…
Custom flash diffuser for pop-up flash of Nikon D7200. Since version 2.2 it will fit other cameras as well due to the sliding slot: you only need one M3 nut and one M3x8mm screw. I used this fantastic design for the flash mount, many…
I wanted a textured surface on my print, so I remixed this to be able to print the parts laying flat on the 180x180mm bed. You'll need to print them with supports, but without a skirt or brim when printing on a Mini/Mini+; after which…
This is a simple block for storing SD cards and flash drives. Printed mine with an 0.4 nozzle and 0.2 layer height. If you print the model upside-down (with the holes on the bottom) you'll get some really perfect holes and a smooth…
Cache griffe flash - Camera Hot Shoe Cover
A bracket for the Parkside HG06412 LED flashlight with hooks for use in wall-mounted sales in LIDL supermarkets. Perhaps it can be used in products from other manufacturers such as Ikea, but I do not know. The separation between hooks is…
This light diffuser fits on a Godox v860II flashlight. It's very easy to use and prints in vase mode. If you don't have the same flashlight, you can use the provided Fusion 360 file and replace the profile of your gear. It doesn't need to…
Simple lateral flashlight holder for picatinny rail. This mount allows the user to turn on/off the light using the index finger without need of a special torch switch. In the picture was mounted a 25 mm diameter torch on an airsoft…
A simple adapter to mount a cheap water pump onto a water table for kids. Reason: Mounts to the table, allows us to turn the hose off, but still lets the kids play with running water that rains down from the top of the table. Water table:…
The wrench has a nominal value of 20mm and the actual opening of 20.00mm as well. For the best results you should take into account your printer tolerances and have it properly calibrated. The wrench thickness is 7.4mm. Use 100% infill.…
I remodel the original part in solidworks and added a vertical splash guard. This prevents the coffee powder from splashing over the portafilter. If you only need the main holder you can download the solidworks file and remove the splash…
English below. Halterung für eine Taschenlampe mit Durchmesser 30 mm, und Lenkerdurchmesser von 31,8 mm (1 1/4 Zoll). Es wird zusätzlich benötigt: Senkkopfschraube M3x30 Senkkopfschraube M3x15 selbstsichernde Mutter / Stoppmutter M3, 2…
Discovered in the depths of imagination and fossilized under the weight of time. This mysterious creature looks like a mix of a T-Rex, sea monster, and a paleontologist’s fever dream. With a face full of teeth, a menacing tongue sticking…
A Picatinny Mount for a tiny flashlight. (13mm diameter) I also included a version for 14.5mm diameter, to hold on to the wider front part of the flashlight. It was made for the MecArmy X2S flashlight. Additional hardware: 2x M3 nut 1x M3…
This 1x1 gridfinity module holds a 35mm flashllight vertically. Prints without supports. Based on the Gridfinity System from Zack Freedman: https://thangs.com/designer/ZackFreedman https://www.youtube.com/c/ZackFreedman License: CC…
Version 2 (more like 5.2) now with thinner grid at 0.4mm thickness! Including the Fusion 360 file! Whether in airsoft or out in the woods, shiny stuff is really easy to spot. The front of your flashlight is a large perfectly reflective…
A quick ‘n’ dirty adapter for your Moon Rigel pro which lets you mount the flashlight to any of the GoPro mounts you may have laying around. Just unscrew the original Garmin-style mount and screw this adapter in place while reusing the…
Replacement for Step2 Showers Splash Pond Water Table Part M, likely it will fit several other Step2 splash table sets. Unfortunately supports are required.
Welcome, and thank you for choosing my model. I will provide some context for this model. This practical 3D-printed flashcard holder is ideal for neatly organizing your study cards and presenting them in a clear overview. The design is…
Cache griffe flash - Camera Hot Shoe Cover
Sometimes my Braun Series 9 starts splasing during the cleaning process. This is a splashguard to prevent this mess.
I split the model to allow for printing w/o supports. Slots were added to use zip ties to hold the halves together. The attached gcode is for the MK3S using PETG material.
Finally had chance to remix a model https://www.printables.com/model/131862-desktop-whomp-rocket I and my son had a lot of fun with! The idea was if the water could be used to launch the rocket, helping with the hard-to-achieve sealing in…
This is a stunning decoration featuring hex pattern that you can clip on the original USB flash drive that is provided by default with the Prusa Mini. It's not stunning for the design but because it helps intuitively finding the proper…
Carrying handle for my Sofirn BLF-LT1 Lantern Flashlight. Written in open scad and the code is a bit of a mess. sorry.
!!!This is not a real weapon!!! Hello, Welcome to my profile, full of models and miniatures :-) I have for you Airsoft Flashlight Holder on R.I.S. This is a flashlight or laser holder that can beautify your Airsoft replica. The flashlight…
I have designed a splash guard for the Knock Box Mini. At the back is still space for a can with cleaning tablets. So that is no longer so much dirty when tapping the coffee powder.
flash hider for airsoft https://www.printables.com/model/578627-fgc-6-fgc-9-mkii-stingray-flash-hider-14mm-ccw-for
I thought it would be a fun project to make, so I created a flashlight holder, but for the internal part of it, so that it can dry easily after cleaning. There are two parts that can be printed separately or together: clamp and ring. They…
(DONT USE IT, IT DOESNT WORK ANYMORE! WILL BE MAKING NEW VERSION) Yep, something new for something old... I created (with chatgpt ofc) Anycubic Mega Zero Klipper Firmware Flasher It's very simply just run a file and you are good to go!…
This is a simple but effective splash guard for the Thermomix. printed with adaptive layer height for quicker and better results. it uses a modifier to remove the top and bottom layer and Gyroid infill at 20% to create a filter, releases…
This little piece slides into the flash socket on the Sony A6000 or A6500 cameras to hold the flash so it points up as shown in the photo. This allows the flash to bounce off the ceiling instead of hitting the subject directly. A bounced…
Recommended print settings: Material: PLA/PETG Layer Height: 0.15 mm or less Infill % : 15+ Supports: No Print Orientation: Default as modeled Brim: Optional This model is a simplistic flashlight that can be added to a keychain. A CR2032…
This is a mount for a Planet Bike Superflash taillight. This enables mounting of the Superflash rear light under your seat on the rails, instead of mounting to the seat post or seat stay. This should be especially useful to those with…
Design The shower head holder bracket broken, the shower bar broken, no replacement for just the broken part? We had enough of always having to buy the complete set of handle, bar, tube… for which we had above that never a real need since…
I was attempting to design a simple flashlight using conductive filament with the goal of being entirely printed (just add batteries and bulb) with a single extruder 3d printer. After several iterations with limited success ( see here ) I…
Add on to attach a speedlight to a Lighting Stand, like Manfrotto I made 2 versions, one sigle/vertical, double with vertical and horizontal hot shoe attachment. To secure it to the lighting stand, an M4 bolt is necessary. You can print…
This is made specifically for the Planet Bike Superflash (though it may fit some other planet bike taillights). At 3mm thick, this is a quick print, even with 100% infill. Many of the edges are chamfered to make it easier to clip on. Clip…
Do you love 3D Printy's bobbleheads or one of the many models that use his baseplates and springs ? Do you lament your inability to mount one of these fantastic bobbleheads to your camera? Well this is the print for you! OpenSCAD OpenSCAD…
Super basic splash guard for use at the end of a bathtub so water doesn't spill over
it is used to attract fish by throwing it into the water, it will flow while reflecting light which creates flashes imitating an injured fish or other. It is mainly used to attract predators. It must be covered with aluminum or adhesive…
Flasher can be found under this Link: https://amzn.eu/d/1qhwYLW
Flat removeable mount for aftermarket ESCs. Uses the VXL 3s mounting holes. Any setting will work… LITERALLY ANY (I think).
Holder for using colored gels for the system flash Metz 52 AF-1. Print it with 15% infill No Support
Update: Success! Feel free to continue below for perspective on this project, but there is now a working model on Printables here . I was attempting to design a simple flashlight using conductive filament with the goal of being entirely…
Description This is a small, no-nonsense case for the SparkFun Basic Flashlight PCB. Designed to be compact, sturdy, and easy to assemble, with a printed button that directly actuates the onboard switch. Tolerances are intentionally snug…
These are diffusers that fit the fully printed flashlight . Replace the original bulb conductor with this threaded one, then pick your diffuser and screw it on. I have found it most usable to actually glue the diffuser to the bulb…
Holds up to three flashlights: Fenix PD35, Olight H2R Nova, and Olight Arkfeld Pro. Also fits a chapstick or other AAA flashlight. Bin was generated using the Gridfinity Generator at https://gridfinity.bouwens.co/
A simple case for the Joey GG cart flasher. Print both top and base parts large flat surface down no supports required. Qty 2, M3x15mm (or 10mm) screws required to hold the case together. Qty 4 rubber stick on feet (optional) - I always…
So its a desktop holder for the GB Flash by LesserCuma and GeekSimon, it was printed with the Creality Ender 3 V2 and PLA plastic. Made for 2.5cm thick desktop.
This is printable enclosure for Flashforge adventurer 5m, this model is made by Flashforge . Flashforge will soon release a kit on their homepage with neccesary items. Measurements for panels: Top Plate 332 x 315 x 3 24mm Radius Handle…
I remixed the drag chain by INQUE and cut off the spool holder portion because I use a side mounted spool holder and don't have a use nor the space for the vertical spool holder. I also added in the drag chain termination part by Doug…
A simple and effective poop chute / ramp and bucket solution for the Flashforge AD5X as seen in my review video here: There are two files in this listing - the first is a 3MF configured for the Bambu Lab A1 and if you use the drop down to…
Heads-up News Heads-up #1: there’s a newer version of this here: https://www.printables.com/model/1247920-new-v30-of-top-riser-set-for-flashforge-adventurer Also, heads-up #2: There is a helpful new “guard plate” improvement remix…
23 June 2024 - NOTE: Updated model of the insert to accommodate the longer allen keys that are being shipped with new printers. This tool box holds all the accessories and tools that are shipped with the Flashforge Adventurer 5m and 5m…
Уменьшение стука стола при Z-HOPE: фиксатор гаек ходовых винтов. Нужно два фиксатора на передние стойки (-SIDE) и один на заднюю (-BACK). You need two retainers for the front struts (-SIDE) and one for the rear strut.
The Printed parts are created by Flashforge, I sketched DXF file of enclosure based on it. All panels are made of 3mm polycarbonate or acrylic panels Besides you need to cut the panels which are cut by laser or CNC cutter, you also have…
How to use the 'All Files' choice "Download All Files" gets everything — including the .3mf file — named " ad5m-minimal-enclosure-by-design8studio-for-orcaslicer-230.3mf " — which is an OrcaSlicer project file , containing multiple print…
Batman Flashpoint Inspired Mask Enjoy Category: 3D Printing
This was made for use with the DIY enclosure available here . HEADS UP - 1 of 3 - new better version of this! I've published a new, improved remix of my popular side-mounted spool holder — PLEASE NOTE: it's not just about the four…
CAVEATS Before you download this or try it: I get a fair amount of reports of issues with this particular listing, especially when used with one of my minimal enclosure remixes. For example, this warning from fellow maker Eric Morneau : I…
I am attaching the STEP file for possible modifications. It is not HSW compatible. Recommended print settings: PLA, 0.6 nozzle, height 0.42 mm, 2 perimeters, gyroid infill 15%, 4 layers top and bottom, and no support
Flashforge AD5X Spool Number Plates, shaped to the spool spindle ends. Useful to show spool number which is hidden if the spool is installed. Just clips in to existing spindle hex hole at the end. Print Settings: Nozzle Temperature: 220°C…
This design can be printed using one of the AD5X feature - Multi-Color Printing.
Simple printbed scraper with Flashforge logo. Must have tool to remove stubborn prints and/or purge lines from the printbed. Layer height:0.12 Shells/walls: 3 Infill: 15%
FAQ Q: I printed your enclosure and I can’t figure out how to install the filament sensor / spool holder. I’ve looked on YouTube for installation videos and still stuck. Any help would be greatly appreciated. A: Not long after the initial…
NEW The new remix prints as one piece, not two, with no supports needed, and this eliminates an intermediate step of gluing two parts together. Kudos and thanks to WingWong (@WingWong_521453) for the idea. I'd have just used his remix,…
now you can print with support or just use the 2 parts with no support for the two part you need glue. printed in abs if you want the part to be stronger print the parts like in the picture.
A Flashforge AD5X tool insert to fit into the Flashforge Adventurer 5M Toolkit .
This is printable enclosure for Flashforge AD5X, this model is made by Flashforge. Flashforge will soon releas
Designed for users who want printer waste to drop to the left side of the printer instead of behind it. Installs into the standard mounting using the existing bolts on the rear cover.
This custom FlashForge AD5X enclosure features a clean, functional design finished in Galaxy Black, accented with Green Silk Matte inlays for subtle contrast and depth. The build focuses on durability and visual balance while keeping a…
I needed to save space and access the filament easily. I created this :-) (easy to print NO raft or support needed) 15% infill should be enough. It mounts on the right side top! Works for both - small and normal 1kg. filament rolls. 𝔗𝔴𝔬…
This is one of three options I've made available for Bowden PTFE Coupler C-Clip for the Adventurer (AD5M) Runout Sensor. OPTION 1 of 3 — Clone of the stock factory clip PLA. Print as oriented. I used 0.2 mm layer height on 0.4 mm nozzle.…
An extruder guide for Flashforge Adventurer 5m Pro to avoid scratches on the inside of the cover. The bottom part is made flexible to follow the extruder tube in any direction, while at the same time hold it down a little bit. Make sure…
Wanted a larger bin to hold filament waste. Painted a few spaced support strips on the underside of the raised bottom part (.mf); otherwise very simple print
This is an S-shaped dual clip designed to organize and hold two tubes in parallel. in this case, the extruder cable and the filament tube for the FlashForge AD5X 3D printer. Shape: The S-shape forms two opposing curved channels, each…
Overview A screen bezel and a stylus holder for the FlashForge Adventurer 5m. One M3x6 or M3x5 screw is required to securely fasten the stylus holder to the cover. A bit of super glue might help as well. The bezel is a semi-loose fit for…
Edited 09/27/2026 By user request, I added PIP clamps in 42 mm, 44 mm and 46 mm diameters. They are available only in the unmarked version, in the Pipe Clamps (second version, PIP, unmarked) folder. Edited 06/06/2025 I’ve added a custom…
Anti Vibration feet for Flashforge Adventurer 5m. The rear feet sit at a 45 degree angle to be able to fit. These make the printer feel and sound a lot more solid and help reduce vibrations tremendously. I'm not sure if it is necessary…
VIDEOS These two short videos explain everything: NEW New as of January 28, 2026 — The following additions and improvements were made: Now the boxes can be mounted on the sides of the printer. Click here: New as of January 27, 2026 — The…
Модификация системы обдува 3D-принтера Flashforge Adventurer 5M Modification of the Flashforge Adventurer 5M 3D printer blowing system Печатать без поддержек и отключить замедления на внешних периметрах Print without supports and disable…
You need 2 M4x8.1 Heat inserts and 2 M4x16 socket screws. First mount the base on the printer, after that you can mount the holder to the base. No need to reposition the filament runout sensor.
I bought this HysiPrui PEI build plate from Amazon for my AD5M and wanted to print the handle part. I found that the build plate was added to OrcaSlicer by FlashForge. Source:…
Overview A re-imagined side mounted spool holder for the Flashforge Adventurer 5M. This design fits over your existing enclosure piece “D1”. A 4mm x 10mm bolt might be needed to replace the existing bolt in the guard plate, although I was…
The best card in clash royale
REUPLOAD from official Flashforge Wiki! All Rights at Flashforge! The Files for the official AD5X Enclosure as 3mf File. Print at 0,4 Nozzle , 0,2 layer, min 15% infill and PLA. Works and looks great.
The rest of the files can be found → HERE ←, as well as a description of the necessary parts. The model is put directly on the filament slot on the printhead. Therefore, to change the filament, you will no longer need to remove the tube…
Box for nozzle set AD5X optinal pause in print to add 4 x 8mm magnets
Neat, easy to print enclosure with 4 mm (or 3 mm) polycarbonate sheet panels. The purpose of the creation was to minimize the design and the likelihood of damaging the display by accidentally snagging it. Approximately 750 grams of…
Recommend using PETG or better and at least 10% infill Hardware needed: 2 M3x16 for filament sensor 1 M4x8 2 M3x6 2 M3 brass inserts Working on some mods to the Adventurer 5M follow me for more updates :D
This is my poop chute design for the AD5X so you can still have access to the power cable and lan connection. I printed the slide standing up with tree supports on build plate only. The basket i printed with normal supports on build plate…
FAQ Q: I printed your enclosure and I can’t figure out how to install the filament sensor / spool holder. I’ve looked on YouTube for installation videos and still stuck. Any help would be greatly appreciated. A: Not long after the initial…
Use tree supports only in green area (see photos). Print with something heat-resistant (abs, abs-gf, petg-cf, etc). Self-tapping screws for fan mount. Holes for 5x3 magnets.
Improved version with display installation from the inside (without frame). _____________________________________________________________________________ Enclosure with 4 mm polycarbonate sheet panels https://a360.co/47jcXw3 . The purpose…
A bust i did in Zbrush, just for fun. STL Files are aligned as how i printed them. Please use support, but you won´t need much infill. 5-10 % should be enough.
This short explainer video is less than 1 minute long. Side Cutter Mount adapted for use on the Flashforge Adventurer 5M (AD5M) with the DIY printed enclosure. One model suits the front right or left, while another model suits the back…
NEW VERSIONS v3 of the AD5M door hinge now available expressly for the Minimal enclosure and its remixes. It moves the plexiglass door downward by 5mm to accommodate getting the touchscreen back on the metal frame, as well as all the…
![[Option 1 of 3] Flashforge Adventurer (AD5M) Runout Sensor - Bowden PTFE Coupler C-Clip](https://media.printables.com/media/prints/1135017/images/8564847_4f16d96d-bbb0-4e30-b512-e6cbef000ca4_6b610305-5426-469c-81a4-ef02564ed108/2025-01-04-img_9970-ad5m-bowden-ptfe-coupler-c-clip-cropped-w-labels-printables-thumbnail.jpg)
