Search results: lightbar

Sort order

171 models

P
PrintablesNils Kal

Prusa i3 LED Lightbar with Filament Guide MK2 / MK3 / MK3S - Single Piece

Here is my design of a Lightbar for the Prusa MK2* & MK3(s). Features: LED's directly powered by the printer Wiring running inside the mount Integrated filament guides for both spool sides On/Off switch Directly wired to the Einsy board…

Print approx. €5.31–€6.49 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
943
Likes
226
Rating
4.75
P
PrintablesCr0ss8y

Prusa Lightbar

A simple but quite good looking Lightbar for Prusa Printers Print instructions Layer = 0,30mm No Raft/Support Switch: https://www.amazon.de/gp/product/B07BPQVQS2/ref=ppx_yo_dt_b_asin_title_o09_s00?ie=UTF8&psc=1 LEDs:…

Print approx. €1.77–€2.16 excl. taxPreliminary estimate for one variant

Downloads
189
Likes
42
Rating
4
P
PrintablesBLVCKBEAST

MR A lightbar for RC cars

lightbar for rc cars

Print approx. €0.89–€1.09 excl. taxPreliminary estimate for one variant

Downloads
124
Likes
23
Rating
0
P
Printablescamdotcam

LightBar Prusa MK3S Z Axis Dual Mount 7*16 extrusion slot

This is a modification I made to the excellent light bar design by SethBon to suit some aluminium extrusion I have, with external dimensions 7*16.…

Print approx. €8.06–€9.85 excl. taxPreliminary estimate for one variant

Downloads
81
Likes
14
Rating
5
P
PrintablesRapidSpatz

Hue Play Lightbar Mount for Table Clamp

The Table Clamp: https://www.gravitystands.com/en/products/accessories/2918/ms-tm-1-b

Print approx. €1.01–€1.24 excl. taxPreliminary estimate for one variant

Downloads
79
Likes
23
Rating
5
P
PrintablesTiskoviny.EU

LED Lightbar for Prusa i3 MK2, MK25, MK3

EN: LED Lightbar for Prusa i3 MK2, MK25, MK3 This is an easy-to-snap light model for the printer frame. Note that there are differences in frame width of 5 mm on each side between the MK2 and MK3. For this reason, two sets of models are…

Print approx. €7.45–€9.10 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
60
Likes
17
Rating
0
P
PrintablesLeon

Hue Play Lightbar Mount Prusa Mini(+)

Version 2 over here Hi, this is my first project with 3D-modelling and Fusion360, please be gentle. I used the lightbar socket from myit on thingiverse ( https://www.thingiverse.com/thing:4735701 ) to make my life easier. The mount works…

Print approx. €5.23–€6.39 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
55
Likes
20
Rating
0
P
PrintablesGilbert17

Hue Play Lightbar Mount for HFTEK Monitormounts / Alu Bar

You can use the original Screw or a M3x10 to secure the Lightbar and then clip it on to the Alurail of your HFTEK Monitormount. The Hue Play Lightbar is angled at 45°.

Print approx. €1.08–€1.32 excl. taxPreliminary estimate for one variant

Downloads
31
Likes
4
Rating
0
P
PrintableseVoxOne

Philips Hue Play Lightbar Mount for IKEA Kallax – Snap-On

Philips Hue Play Lightbar Mount for IKEA Kallax Enhance your IKEA Kallax setup with this custom mount for the Philips Hue Play Lightbar . It simply slides over the top edge of a Kallax shelf and positions the lightbar to shine straight…

Print approx. €1.12–€1.37 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
16
Likes
0
Rating
0
P
PrintablesKalleKnall

Prusa MK3 MK3S LightBar

Here's my new LightBar. It fits nice on the MK3 Frame and you can adjust the angle of the LightBar to get a good illumination. The cable is guided in one of the arms. I've printed it in Prusament Orange PETG to match the other Parts. You…

Downloads
656
Likes
194
Rating
4.67
P
PrintablesFeral Engineer

Creality Ender 3 v3 se lightbar

Print the center parts with brim so they don't fall over. I used PETG, but PLA should work. Install video here:

Downloads
427
Likes
126
Rating
4
P
Printablesrobertgriffiths

Bambulabs AMS attached lightbar

Just a simple lightbar that clips in under the front lip of the AMS unit, providing light through the glass top into the X1 printer. Printed in two parts (due to length), it has columns that slide into the void space either side of the…

Downloads
330
Likes
108
Rating
4.5
P
PrintablesBen

Lightbar Clip for Ender 3 V3 SE

Light-bar attachment for the Ender 3 V3 SE that clips onto the X-axis gantry. Warning! The max Z Height will be reduced when this is on, the print head cable drags on the clips at the top. 240mm height is probably ok but do your own…

Downloads
234
Likes
61
Rating
5
P
PrintablesSven

Philips Hue White and Color Ambiance Play Lightbar Arm

This is an arm that you can used to attach your Philips Hue White and Color Ambiance Play Lightbar to the back of your desk. The angle can be adjusted to your liking. The ony thing that is required is a M3 screw to attach the Lightbar to…

Downloads
224
Likes
45
Rating
4.83
P
PrintablesClutch Kick

Anycubic Kobra X LED Lightbar Now with version 2 for max z height/Diffuser

The Kobra X is an awesome little printer but the lighting is super lacking! I decided to tackle that with a simple and effective led light bar. This model is now updated to version 2! Version 2 moves the mounting points or the lightbar…

Downloads
222
Likes
57
Rating
0
P
Printablesvespaholic

V-Slot Gantry Lightbar Shade for Ender 3 v2 and Variants

Hazzah! Purpose and Theory: To redirect the absoutely insane amount of light bleed from my cheap light bar I purchased and help me from being blinded by the light if I wanna check my prints. This helps redirect the light on to the print…

Downloads
217
Likes
38
Rating
5
P
PrintablesPaul Wilson

Ender 3 v3 Plus LED Lightbar

Same as the original design but longer to accommodate the extra width of the Ender 3 v3 Plus. Also modified brackets as the Plus is thicker.

Downloads
202
Likes
22
Rating
5
P
PrintablesApache FPV

Ender 3 V3 SE Lightbar

Soldered to the middle of the led strip, wrapped wires around arm, ran towards screen side, held down with tape and ran to the 24v on the board. Have since cut the wires and put on fully insulated spade connectors so I can disconnect the…

Downloads
187
Likes
65
Rating
5
P
PrintablesGreatOldOne

Prusa I3 MK3 / MK3s Lightbar for Generic 8mm LED strip

Remixed from Bofh_1377s excellent light bar - I had downloaded this to use up some IKEA LED strip I had left over from another project - but realised once I had printed all the parts that the strip I had was not the same as the one…

Downloads
182
Likes
38
Rating
5
P
PrintablesSafK

Anycubic Kobra 3 - LED Lightbar holder

Hi, I designed an over hang style led light bar holder with wiring channel for Anycubic Kobra 3. It is more modular. You can have one long strip, multiple short ones or even front and back (as in picture). Material: PLA LED: 5V USB LED

Downloads
168
Likes
30
Rating
0
P
PrintablesMegatech

Ender 2 Pro Spool Holder Z-Axis Anti-Wobble Lightbar

The Ender 2 Pro spool holder, z-axis anti-wobble, and lightbar can be printed with the Ender 2 Pro. It barely fits but it fits. I will post a pic of the orientation up above in the picture section. I printed mine at 50% infill with PLA+…

Downloads
167
Likes
26
Rating
5

QIDI Q2 Lightbar Set (Top+Side)

Printer: QIDI Q2, LED strip width: 8 mm. Updated design of mounts for an LED strip. For proper operation, the original LED strip must be replaced with any available one. It is important that the strip is rated for 24 V. Print with…

Downloads
163
Likes
39
Rating
4.5
P
PrintablesSafK

Anycubic Kobra 3 - LED Lightbar with Hooks

Hi, I designed it for my Anycubic Kobra 3. It is only 5mm thick so it should not interfere with tall prints but use it at your own discretion. Material: PLA LED: 5V USB

Downloads
153
Likes
29
Rating
0
P
PrintablesR3V9K

Jeep XJ blinker lightbar

i made this off of my 98 Jeep Cherokee Xj. will fit a 97-01 XJs. My aftermarket headlights have blinkers integrated so i was able to remove them. The bracket is designed with full adjustment for a 7'' led light bar on amazon. see below.…

Downloads
151
Likes
22
Rating
0
P
Printablesdennes

wall bracket/wand Halterung Govee Wandleuchte, Glide Wall Light, WiFi RGBIC LED Lightbar

Die ist eine Wand Halterung für Govee Wandleuchte WiFi RGBIC LED Lightbar This is a wall mount for Govee Wall Light WiFi RGBIC LED Lightbar Print Settings Supports: No Resolution: 0.2 Infill: over 15%

Downloads
144
Likes
8
Rating
0
P

SV08 2020 Top Rail Adapter Bracket (ToolChanger or Lightbar Mods)

This is an adaptor bracket that adds 2020 to the top of the SV08. It fits into the existing hardware and top bar without modification. This is intended to allow the use of the docks for the StealthChanger or TapChanger Toolchanger mods.…

Downloads
140
Likes
46
Rating
5
P
PrintablesKamil G

Additional roof and lightbar for hot wheels garage

Additional roof and lightbar for hot wheels garage. For the lights I use "el wire" 50cm long one.

Downloads
124
Likes
79
Rating
0
P
Printableskusha

Generic webcamera 1/4" mount for Xiaomi Mi Monitor Lightbar

I Remixed alexVinarskis's lightbar model to fit my generic camera from Aliexpress (uses 1/4" mount). Print with 100% infill - otherwise, the screw might break. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports:…

Downloads
109
Likes
15
Rating
0
P
Printabless7emar

Hue Play Lightbar Mount for AnkerMake M5

Light Bar Mount for the AnkerMake M5 using a Philips Hue Play Lightbar. You can use the original M3-.50 x 10 Screw by Philips. ------ I printed with these settings: Resolution: 0.2 Supports: No Infill: 20% (Cubic) Rafts: Skirt Filament:…

Downloads
109
Likes
39
Rating
5
P
PrintablesYannikFreund

Monitor Lightbar (Work in progress)

This model is "Work in progress". All though it already works, I will post some updates and a full description in the future.

Downloads
107
Likes
25
Rating
5
P
PrintablesJohn G.

PS4 Lightbar Decal

PS4 Lightbar Decal(s) Note #1: My Print settings are not perfect, so you will see some defects in my pictures, please don't let that discourage you from choosing my model! Note #2: THIS DOESN'T WORK ON PS5 CONTROLLER! What You Need: Sand…

Downloads
103
Likes
10
Rating
0
P
PrintablesMihkel Mägi

Sovol SV07 Plus LED lightbar

A simple LED mount for Sovol SV07 Plus. I used an 8mm wide 24V LED strip from Aliexpress and connected it to the aux fan connector because I don't use it. Added a picture of the lightbar connector schematic for redesigning.

Downloads
102
Likes
15
Rating
5
P
PrintablesAnoop K R

LightBar for Ender 3 V2

This Light-Bar design is inspired by the light of Ender 3 S1 Pro. LED is glued to a PVC Electrical wire duct and designed around it. Dimensions are given in the pictures. Power is taken from the Ender 3 Power supply itself with the help…

Downloads
98
Likes
39
Rating
0
P
Printablesmakko

Lightbar for Adventurer 5M (AD5M)

This is a simple light bar mod for AD5M. Attaches with 7pcs of 5x2mm magnets. I used basic 24V light strip bought from AliExpress, plus you need a 2-pin JST XH2.54 connector. Just solder positive and negative to the connector and plug it…

Downloads
93
Likes
13
Rating
5
P
PrintablesAsolo

LED Lightbar prusa mk3 mk3s mk3s+ remix

I really liked dubs49's design. Unfortunately, a quick print of a cross section of their bar showed it wouldn't fit the LEDs I had on hand. So I redesigned the bar from scratch to use the leds I really wanted to use.…

Downloads
92
Likes
15
Rating
5
P
PrintablesTrivious

Ender 3 v3 KE Lightbar and Gantry Combo - Trivious Edition

I got an Ender 3 V3 KE in November 2024. I've been printing for years on other peoples printers both filament and resin, but the price of the machines and time it took was not where it needed to be yet back then. Now that it is I started…

Downloads
89
Likes
21
Rating
0

Ender3 V3 KE LightBar Upgrade

Print your own light bar

Downloads
86
Likes
19
Rating
0
P
PrintablesPlanetReality3D

Hue Lightbar mount for Ikea Skadis Pegboard

This is a simple mount to put your Philips Hue lightbars on your Ikea Skadis pegboard. It's my first upload so please be gentle :-) You can print this with 0.2mm layer height and fill 15% without support . It fits perfectly, is stable and…

Downloads
80
Likes
24
Rating
0
P
PrintablesNiDev

Anker powerconf c200 Xiaomi Lightbar webcam mount

This is my remix of this model, which was originally designed to combine the Xiaomi Mi Computer Monitor Light Bar with the Logitech Streamcam. While the original model was excellent, I needed a solution tailored for the Anker PowerConf…

Downloads
79
Likes
6
Rating
4.5
P

Crealtiy Ender-3 V3 SE lightbar remix

This is a set of mounting brackets for the Creality light kit. Modified from the original to fit the Ender-3 V3 SE, and add a wire clip.

Downloads
79
Likes
18
Rating
0
P
Printablesidesire90

2020 Profile Lightbar 200mm Voron

Like, Share, Subscribe and check my other 3D models! 200mm Lightbar for an Voron 3D Printer. I used 3 of them for my Voron Trident Please print in ABS

Downloads
77
Likes
18
Rating
0
P
PrintablesMyCynicalTurtle

Kobra 2 neo Lightbar

Light bar / filament guide put both together (make sure of your fitment ) then glue on connector, should fit go and fits neo2 Added clip to files that i used to hide/hold usb cables from light bar ( runs down the right back side)

Downloads
77
Likes
20
Rating
0
P
Printablespcboy

AW3418DW Xiaomi Mijia Monitor Lightbar Adapter

I was inspired by https://www.thingiverse.com/thing:4931271 But sadly that thing did not work for my AW3418DW monitor. So after a dozen of trial & error, I finally made something working great for me. Hopefully it works for you too.

Downloads
77
Likes
4
Rating
0
P
PrintablesFreddeVat

Ender 3 v2 NEO LED lightbar

LED Strip holder + Endcaps. LED strip from Action Aluminum profile 10mm x 10mm x 1mm Update I've added a bracket for the switch Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: Doesn't Matter Supports: No Resolution: 0.2…

Downloads
75
Likes
39
Rating
0
P
Printablestobi

Lightbars from aluminum profiles - LED Lights (back, front and sides)

Simple lightbars for the latest Prusa printers. The design includes a clipable lightbar which lightens the front and the back from the top of the printer as well as screwable vertical LED pillars which light the build platform. The setup…

Downloads
74
Likes
29
Rating
0
P
PrintablesWolfgang Haist

ender 3 Lightbar

Eine Lichtleiste für den Ender 3 max, sollte auch auf den anderen Modellen der Ender3 serie passen. Für die LED Beleuchtung habe ich ein normales LED Band zum kleben aus dem baumarkt genommen. An der Seite ist im Deckel ein Loch um das…

Downloads
74
Likes
15
Rating
0
P
PrintablesThoxo

Holder to fit the Creality Ender 3 (pro,neo,V2) original LED Lightbar on the Ender 3 Max Neo

To fit the original Creality Ender3 Neo LED Light Kit 24V 5W Ender 3,Ender 3 V2, Ender3 Pro, on the Ender 3 max Neo It is necessary to extend the original cables of the LED strip so that they can be connected to the right side of the lamp…

Downloads
71
Likes
15
Rating
0
P
PrintablesMRiscoC

Lightbar support for Ender3v2

Easy to print lightbar support for the top bar of the Ender3v2 Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Filament: Any PLA black Category: 3D Printer Accessories

Downloads
66
Likes
23
Rating
0
P
PrintablesBristolGarry

Hinged LED Lightbar for Prusa i3 Mk3

This is a re-build/reworking of https://www.prusaprinters.org/prints/882-prusa-i3-mk3-led-bar-holder-v2/ . I needed a bar that would hinge out of the way for ease of access to the plate/extruder, so I reworked the original by Kenji and…

Downloads
65
Likes
8
Rating
5
P
PrintablesMathias

Custom lightbar for Model 14 (3D sets)

Custom light bar for 3D sets Model 14. This light bar is remixed and extended to be able to add 4 piceses of standard 5mm LED lights into the light bar. After the LEDs are inserted cabeling can be done and back cover can be attached using…

Downloads
65
Likes
15
Rating
0
P
Printablesppeterka

Lightbar mount for 2020 profile (Ender 3 Pro)

I didn't like the mounts I found, so I designed this - uses less material than most. In hindsight, the fact that only gravity holds this in place might not be the best design choice, but it works well so far. Enjoy! Print Settings Printer…

Downloads
64
Likes
7
Rating
0
P
PrintablesStar Blink

A flat(ish) holder for Phillips HUE-Lightbar

ENG: A slightly flatter holder for HUE Lightbars. The hole is sized for an M3 Allen screw. To attach just add a few strips of double-sided tape. Printet in PETG ----- GER: Ein etwas flacherer Halter für HUE Lightbars. Das Loch ist für…

Downloads
63
Likes
4
Rating
5
P
PrintablesÖzenç Bilgili

Webcam Lightbar Mount for Logi Brio 500

This is a simple adapter for Logi Brio 500 and Baseus light bar. Print 2 of them for each side

Downloads
63
Likes
4
Rating
5
P
PrintablesOwex3D

Skadis Mount: Philips Hue Play Ambience Lightbar

Sturdy brackets for those wanting to use their Philips Hue Lightbars for illuminating e.g. their workbench area. Single part 155 mm offset from the pegboard to get evenly distributed lighting on your working area. No additional materials…

Downloads
60
Likes
16
Rating
5
P
PrintablesFeatherblade

Xiaomi Lightbar Monitor Spacer

The Xiaomi lightbar mount was slipping on my monitor (Viewsonic XG270q) since it was a bit too thick where the mount touched the back, so I whipped up a quick spacer to both move the contact point up, as well as move the front of the…

Downloads
60
Likes
5
Rating
0
P
PrintablesCippyO

Traxxas Summit front lightbar

This is a lightbar for the Traxxas Summit. it is a direct bolt on to replace the stock 2 led lightbar on the front bumper. Designed it to be able to fit 6 pc of led to the bumper, so you can have a nice light bridge. With a regular…

Downloads
56
Likes
8
Rating
0
P
PrintablesSven

Hue Lightbar Monitor Mount for the Universal Vesa Adapter 3000

This adapter can be used for mounting Hue Lightbars and hold your webcam behind your monitor. Hue Lightbar: The adapter can hold up to 3 Hue Lightbars. You need a wood stick with a diameter of 14mm, which you can pick up at any hardware…

Downloads
56
Likes
17
Rating
0
P
PrintablesGhosty1967

Lightbar for Voron V0.1

Einfache LED-Lichtleiste zur Verwendung im Voron V0.1 (geht wahrscheinlich auch im V0.2). Die Lichleiste sitzt hier anders als bei vielen anderen Versionen auf den letzten oberen Seitenstreben in einem 45° Winkel um den Bauraum möglichst…

Downloads
56
Likes
8
Rating
5
P
Printablesjmynheir

Yamaha Bugeye Zuma Headlight Conversion 6" LED Lightbar 2002-2011

Bugeye Zuma conversion to 6" LED lightbar. Will require a bracket behind it be cut or hammered to fit. Modeled for 6" Nilight LED lightbar from Amazon(link below). Included Blend file for headlight bezel as well as a bracket that fits…

Downloads
54
Likes
5
Rating
0
P
PrintablesOcie Ward

Ocie's Lightbar Bracket (Prusa MK2 & MK3)

Yet another LED lightbar bracket for the Prusa MK2, MK2S, MK2.5, MK3 printer. Print instructions I really like having a LED lightbar mounted out in front of the extruder motor at the top of Z axis. I have been using one of the models that…

Downloads
54
Likes
5
Rating
0
P
Printablesbizmyth

SUNLU S1 Dryer Holder Mk3 (Lightbar Compatible)

This model allows you to hold your SUNLU S1 filament dryer box above the Mk3 by suspending it on the frame. It is designed to avoid colliding with an installed lightbar unlike the original version. Also, I have removed the skeletonized…

Downloads
52
Likes
5
Rating
5
P
PrintablesUnknownUser

Bear lightbar

LED lightbar for Prusa Bear

Downloads
51
Likes
9
Rating
5
P
PrintablesErik Stolt

Traxxas summit 1/16 LED bumpers and Lightbar

I bought a Traxxas summit 1/16 body and I did not have a front or a rear bumper, so i designed and printed some with lights. I also wanted a light bar on the roof, so desinged and printed that to. I also did not have any stickers for the…

Downloads
51
Likes
10
Rating
5
P
PrintablesACC

Xiaomi Lightbar Remote Holder

Neigung: 30° mit Vertiefungen für kleine Möbelgleiter

Downloads
47
Likes
9
Rating
0
P
Printablespietro grandi
Downloads
46
Likes
5
Rating
0
P
PrintablesWerkgeist

Philips HUE Lightbar - Lichtleiste

Durch ein Gewinnspiel bin ich auf die Lightbar von Philips gekommen, wo mein erster Gedanke war “die geht gut selber herzustellen”. Der Grundkörper hat eine Öffnung für den Stromanschluss und einen Klipp, damit dieser auch dann fest…

Downloads
45
Likes
9
Rating
0
P
PrintablesSergei Shuykov

Xiaomi Lightbar spacer for LG OLED42C* series tv

Spacer makes lightbar to clamp reliably to oled42c4(i'm pretty sure that it will work with c2 and c3 as well) and prevents it from skewing, 3mm spacer is made to offset light bar up, so lip doesn't goes beyond bezels and overlaps the…

Downloads
45
Likes
4
Rating
5
P
PrintablesConsti

Lightbarholder for AnkerMake M5

Dies ist eine Lichthalterung für den AnkerMake M5. Lichtleiste: https://amzn.eu/d/c0G2TBE

Downloads
44
Likes
18
Rating
5
P
Printablesdodasch

Prusa Mini Lightbar Holder

it's just a remix of the original: https://www.printables.com/model/15259-prusa-mini-lamp-holder including an Prusa 30x30 T-Slot Nut with M5 thread You need one M12x5 screw

Downloads
43
Likes
8
Rating
0
P
PrintablesJake

Bicycle Lightbar and Bike Computer Mount - WIP

A simple handlebar mount for a 6in. light bar on a bicycle. Unless you have a weird stem or bars that bend super early, these should fit most if not all 31.8mm bars. I used a 2021 Giant Stance for fitment. Photos are from an unfinished…

Downloads
39
Likes
5
Rating
0
P
PrintablesBlownUpp

Diffuser for Prusa i3 LED Lightbar

Printed with a “transparent” PLA since I didn't have any transparent PETG. I did a variable layer height so that I could sneak a thin layer of white PLA in there for better diffusion.

Downloads
39
Likes
7
Rating
5
P
PrintablesOsprey

Lightbar for Prusa i3 MK3S/+

Couldn't find a simple bracket to fit under cabinet led lights like the ones I had so I designed my own. Printed using PETG for extra flexibility on the clamp. Might work with PLA too. The light bars can be mounted with M3x12 counter sunk…

Downloads
38
Likes
7
Rating
5
P
PrintablesKai Mildner

Lightbar for Neptun 2/2s/3 and Ender 3

Hi. I searched for a way to light up my printer. My plan was to use some WS2812 RGB Led's. So i ordered 1m 144 RGB LED's from Aliexpress. The only problem was, that i couldn't find a nice case for the LED's. So i designed my own. The bar…

Downloads
38
Likes
11
Rating
5

Scx24 Lightbar

This is a Lightbar designed for the Axial Scx24 C10, to be mounted on the roof using double sided tape or drilling holes to screw it on. It may fit other scx24s but haven`t tried it out. It was made to fit 5mm 1/10 lights with the metal…

Downloads
36
Likes
10
Rating
0
P
PrintablesGustavln

Lightbar for Prusa Mini

This is a remix from the original owner. I just needed to make some minor changes to make it fit my LED strip. Also changed the design so it doesn't need brass inserts. The two parts fits perfectly together to be locked in place. Printed…

Downloads
36
Likes
12
Rating
0
P
Printableshawk16zz

LED lightbar strip arms for 2020 (and larger) extrusion

I wasn't a fan of a lot of the lightbar arms around so I modeled my own and am pretty happy how they turned out. I made a long arm, 190.75mm long (170.75mm past the extrusion), that can hold two stripes and a short arm, 131.6mm long…

Downloads
36
Likes
8
Rating
0
P
PrintablesLeon

Hue Play Lightbar Mount v2 for Prusa Mini(+)

Hi, this is the second version of my Hue Play Lightbar mount. The first one started to sag a lot and I redid the model completly to now feature a hinge. Everything else pretty much stays the same, but you can now adjust the angle to…

Downloads
34
Likes
3
Rating
0
P
PrintablesLocallyPrint3D

Lightbar WhistleBlok

Whistle Blok for the back of your lightbar. Stops the whistling of the fins on the lightbar. TPU

Downloads
34
Likes
9
Rating
0
P
PrintablesBOFH 1337

Prusa i3 MK3S Lightbar for IKEA HALVTIMME

This is a Lightbar with arms and Cable-Raceway for the IKEA HALVTIMME.

Downloads
34
Likes
6
Rating
0

AD5X Lightbar Rail

Designed to magnetically attach along the top of the AD5X chassis, above the X/Y axis travel rods. Uses minimal filament and avoids screws/screw mount bumps from the IFS. 6x2 magnets will fit, and glue is recommended to secure them. A 24V…

Downloads
33
Likes
10
Rating
5
P
PrintablesKrush

Adapter for Xaiomi Lightbar

This adapter is specifically designed to fit the KTC H27T22, since the curved back didn't interface well with the Xaiomi lightbar's mount. It should work well on other monitors with curved backs, although I have not personally tested any.…

Downloads
33
Likes
6
Rating
0
P
Printablesklk999

Ender V3 SE/KE Lightbar cable manager

Remixed dhananjaip's LED Light Bar Holder to mount the guide to the Z bar with clips rather than screws. I added the mount end to Zortium 3D's cable guide and added some additional cable guides. Reverse the object in the slicer for left…

Downloads
32
Likes
5
Rating
5
P
PrintablesJesster

Lightbar for Creality Ender styled 3d printers

I picked up a roll of Lumastrip LED strip locally for less than $10 and mounted it to the flat surface of this lightbar frame that I created. Since my Ender3 Pro bed is only 235mm, I needed to split the bar in half since the total length…

Downloads
32
Likes
7
Rating
0
P
PrintablesBKNJ

Pinewood Derby Car Police Lightbar

This year we wanted to make a pinewood derby car that looked like a Lamborghini Police car (POLIZIA). What's a police car without a lightbar. Built a small circuit using 555 timer chip and 2 Blue LED's. We needed a lighter to make the…

Downloads
32
Likes
4
Rating
0
P
PrintablesiSquithy

LED Lightbar

Added the bar to my ST250 Machine case and thought it would be good to make available to anybody making this case! Front LED Strip: 3x WS2812 RGB LED Module AZDelivery NodeMCU V2 WiFi Amica ESP8266 ESP-12F I2C Development Board NBEADS…

Downloads
31
Likes
2
Rating
0
P
PrintablesSquidies

Prusa mini+ Lightbar Mod

Remix of a remix to fit this under counter lightbar: https://a.co/d/aLcCabf ASOKO LED Under Cabinet Lighting for Kitchen with Touch Sensor, USB Plug in Under Cabinet Lights, 12 inch Under Counter Lights for Kitchen,Daylight White 4500K,…

Downloads
31
Likes
1
Rating
5
P
PrintablesParametricFab

parametric lightbar for LED strips

Makes LED light bars you can screw or magnet to things. I put 5 minute epoxy over the lights to hold them in and protect them. Category: Electronics

Downloads
30
Likes
5
Rating
5

ender 3 v3 se lightbar

lightbar for ledstrip

Downloads
28
Likes
7
Rating
0
P
PrintablesPiercet

Lightbars 4.0 for extrusion based 3d printers

This project is an upgrade to my previous lightbar work. It extends the edges of the lightbar to make for more comfortable printing with a printer at eye level, adds 2 new sizes (200mm and 100mm) for use with smaller print beds and…

Downloads
27
Likes
4
Rating
0
P
PrintablesSukaByat21

Printable Bracket Housing for MK4 LightBar

This model requires the LEDs to have an adhesive back, and it is quite cumbersome to solder the LEDs after sticking them down. In addition, the part needs to be rotated 40 degrees on the print bed on my MK4 to fit. I attempted to make…

Downloads
27
Likes
4
Rating
0
P
Printablesoccivink

(simple) lightbar for Prusa MK3

Yet another lightbar design for the prusa i3 MK3. Inspired by this design , though the implementation is original. I tried to make a simpler design which can be printed easily without much support. The OpenScad implementation is included…

Downloads
26
Likes
8
Rating
0
P
PrintablesHeath Wilkinson

Barrina LED T5 Lightbar Shop Lights Mount

These holders clamp right into the Barrina lightbars but are loose enough to allow sliding or repositioning the light bar. I have used these with both Gorilla Glue and with screws and they function very well both in the garage and inside…

Downloads
26
Likes
5
Rating
0
P
Printablesjacqalas

Ender 3 v3 Plus Lightbar power box

This little box is to fit the switch and connector for a lightbar in a previous build I did This work on the Ender 3 v3 plus

Downloads
24
Likes
5
Rating
0
P
PrintablesATM0123

Ender 3 Pro Phillips Hue LED Lightstrip Plus Lightbar

Ender 3 Pro Phillips Hue LED Lightstrip Plus Lightbar used to provide plenty of lighting to your bed plate. It easily slides onto your aluminum cross support. All items can be printed without supports. All Left/Right nomenclature is used…

Downloads
24
Likes
1
Rating
0
P
PrintablesChris

Arrma Gorgon - Dual Sided LED Under Glow Lightbar

Personalize your Arrma Gorgon and illuminate the night with these chassis side mounted LED strip mounts for adding 5mm LED strips to your Arrma Gorgon. These will illuminated the area below the chassis, and also project light into the…

Downloads
23
Likes
7
Rating
0
P
PrintablesRaidy

Filament Guide for modular - Lerdge Lightbar handle by Ray

this is a remix by @ daulkarian @daulkarian. . Designed to be used when the filament spool is placed on the table behind the printer and is useful to print TPU. *Two 608 ball bearings are needed. and one M3 nut + M310 screw Check out my…

Downloads
23
Likes
3
Rating
0
P
Printablesvladatoca

MINI/+ hotend lightbar - universal holder / světlo hotendu MINI/+ - univerzální držák

maybe English - Google translator :) Lighting of the working area of the hotend with an LED strip Designed for Prusa MINI Recommendation: material PETG, setting 0.20mm quality, printing without supports Materials needed for completion:…

Downloads
22
Likes
2
Rating
0
P

Bambulab P1P alternative lightbar (alternativní světelná lišta)

I used the connector from original the lightbar I bought with my P1P. (Použil jsem konektor co jsem dostal s originálním LED světlem). I used this LED stripe (použil jsem tento LED pásek):…

Downloads
22
Likes
3
Rating
0
P
Printablesecatodarcus

Monitor lightbar (50cm led light tape)

This a simple lightbar design for your monitor. In one file there are the parts that assembled will create the bar inside which the led tape is glued. In order to ensure that parts are glued enough, two angles of very small width can be…

Downloads
22
Likes
5
Rating
0